Preparation and Characterization of a Cylinder-Type Adsorbent for the Recovery of Lithium from Seawater
Open accessThe DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
In this work, a spinel lithium manganese oxide (LMO) used as a lithium adsorbent was prepared with a conventional solid state reaction using lithium carbonate and manganese carbonate as the reactants. A cylinder-type LMO was prepared using water glass (sodium silicate solution) as a binder together with the reactants and examined for its lithium adsorption capacity. The effect of the preparation condition on the adsorption capacity of the LMO powder was investigated. The optimum heating condition for the LMO powder, determined to be 500°C for 4 h, was applied to prepare the cylinder-type LMO. The cylinder-type LMO showed a maximum adsorption capacity of 15.06 mg/g when immersed in lithium-enriched seawater, whereas LMO powder showed a maximum adsorption capacity of 27.62 mg/g under identical conditions. The cylinder-type LMO generally maintained its structure after the acid treatment and the Li adsorption process. Thus, the cylinder-type LMO developed in this study can overcome the limits associated with powder-type adsorbents and may be appropriate for multiple adsorption runs in seawater.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chitrakar, R., Kanoh, H., Miyai, Y., & Ooi, K. (2001) · Industrial & Engineering Chemistry Research · doi:10.1021/ie000911h · Cited by 340
CHUNG, K., LEE, J., KIM, W., KIM, S., & CHO, K. (2008) · Journal of Membrane Science · doi:10.1016/j.memsci.2008.09.041 · Cited by 128
Self-citationStudy on Li+ uptake by lithium ion-sieve via the pH technique
Wang, L., Meng, C. G., & Ma, W. (2009) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2008.09.050 · Cited by 121
Abe, M., & Chitrakar, R. (1987) · Hydrometallurgy · doi:10.1016/0304-386x(87)90045-4 · Cited by 62
Cited by
Extraction of lithium with functionalized lithium ion-sieves
Xu, X., Chen, Y., Wan, P., Gasem, K., Wang, K., He, T., Adidharma, H., & Fan, M. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2016.09.004 · Cited by 536
“In early studies by Ryu et al. [253], a cylinder-type LMO was prepared employing water glass (Na 2 SiO 3 ) that could be used as the binder at high temperature.”
MethodGlobal Lithium Sources—Industrial Use and Future in the Electric Vehicle Industry: A Review
Kavanagh, L., Keohane, J., Garcia Cabellos, G., Lloyd, A., & Cleary, J. (2018) · Resources · doi:10.3390/resources7030057 · Cited by 389
Lithium recovery from brine using a λ-MnO2/activated carbon hybrid supercapacitor system
Kim, S., Lee, J., Kang, J. S., Jo, K., Kim, S., Sung, Y.-E., & Yoon, J. (2015) · Chemosphere · doi:10.1016/j.chemosphere.2015.01.024 · Cited by 228
Tran, T., & Luong, V. T. (2015) · Lithium Process Chemistry · doi:10.1016/b978-0-12-801417-2.00003-7 · Cited by 119
Ryu, T., Haldorai, Y., Rengaraj, A., Shin, J., Hong, H.-J., Lee, G.-W., Han, Y.-K., Huh, Y. S., & Chung, K.-S. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b01632 · Cited by 96
Self-citation
Metadata
- Authors
- Ryu, T., Shin, J., Ryu, J., Park, I., Hong, H., Kim, B.-G., & Chung, K.-S.
- Venue
- MATERIALS TRANSACTIONS
- Publisher
- Japan Institute of Metals
- Published
- 2013
- Volume
- 54
- Issue
- 6
- Pages
- 1029-1033
- ISSN
- 1345-9678 (ISSN-L)
- 1347-5320
- OpenAlex
- W2058765354
- Cited by
- 49
- References
- 4
- FWCI
- 5.76
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Preparation and Characterization of a Cylinder-Type Adsorbent for the Recovery of Lithium from Seawater. https://app.cochat.ai/papers/10.2320/matertrans.m2013028
- The paper
- Ryu, T., Shin, J., Ryu, J., Park, I., Hong, H., Kim, B.-G., & Chung, K.-S. (2013). Preparation and Characterization of a Cylinder-Type Adsorbent for the Recovery of Lithium from Seawater. MATERIALS TRANSACTIONS. https://doi.org/10.2320/matertrans.m2013028
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.