The DOI matches its Crossref record.
High-pulse repetition frequency ultrashort pulse laser processing of copper
Open accessAbstract
This paper presents results obtained in high-pulse repetition frequency ultrashort pulse laser microprocessing of copper. In the study, a variety of ultrashort pulse laser systems supplying high average laser power were applied in order to investigate the influence of the laser parameters on copper ablation. For this, laser pulses of different wavelengths (515 nm, 1030 nm) and pulse durations, ranging between 200 fs and 10 ps, were irradiated to the sample surface by raster scanning of the laser beam. The dependencies of average laser power, pulse energy, and the pulse repetition rate on the ablation rate, the ablation efficiency, and the productivity were studied. A maximum average laser power of 31.7 W was applied in this work. The pulse repetition rate was varied in the rage between 0.2 and 19.3 MHz. Finally, the machining qualities obtained were evaluated by means of surface roughness measurements and scanning electron microscope micrograph analysis.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Schille et al. [102] found a slight decrease in the ablation rate of copper during an increase of the pulse duration from 200 fs to 4 ps.”
From Nanoparticles Engineering by Pulsed Laser Ablation in Liquids: Concepts and Applications (2020) · cites this paper as [102]
In the citing paper
“A further increase of the pulse duration up to 10 ps significantly reduced the ablation rate.”
From Nanoparticles Engineering by Pulsed Laser Ablation in Liquids: Concepts and Applications (2020) · cites this paper as [102]
In the citing paper
“A flowing liquid homogenizes the result of LAL compared to a static fluid environment [102,103].”
From Nanoparticles Engineering by Pulsed Laser Ablation in Liquids: Concepts and Applications (2020) · cites this paper as [102]
Citations
Cites
No references could be resolved yet.
Research works printed but not linked: 8
- 2008, High speed laser drilling of metals using a high repetition rate, high average power ultrafast fiber CPA system, Opt. Express, 16, 8958, 10.1364/OE.16.008958 · DOI
- 2013, Influence of the repetition rate and pulse duration on the incubation effect in multiple-shots ultrafast laser ablation of steel, Phys. Procedia, 41, 698, 10.1016/j.phpro.2013.03.136 · DOI
- J. Schille, “Investigation of micromachining using a high repetition rate femtosecond fibre laser,” Ph.D. thesis, University of Manchester, United Kingdom, 2013.
- 2011, High Repetition Rate Ultrashort Pulse Micromachining with Fiber Lasers
- Möglichkeiten und Grenzen neuer Lasersysteme für die Fertigungstechnik in der Mikrobearbeitung (written in German), 269
- 2010, Microdrilling of metals using femtosecond laser pulses and high average powers at 515 nm and 1030 nm, Appl. Phys. A, 100, 53, 10.1007/s00339-010-5714-0 · DOI
- 2011, Ultrafast scan techniques for 3D-μm structuring of metal surfaces with high repetitive ps-laser pulses, Phys. Procedia, 12, 105, 10.1016/j.phpro.2011.03.112 · DOI
- 2009, Use of high repetition rate and high power lasers in microfabrication: How to keep the efficiency high?, J. Laser Micro/Nanoeng., 4, 186, 10.2961/jlmn.2009.03.0008 · DOI · Paper page
Cited by
Sorted by citations
Nanoparticles Engineering by Pulsed Laser Ablation in Liquids: Concepts and Applications
Fazio, E., Gökce, B., De Giacomo, A., Meneghetti, M., Compagnini, G., Tommasini, M., Waag, F., Lucotti, A., Zanchi, C. G., Ossi, P. M., et al. (2020) · Nanomaterials · doi:10.3390/nano10112317 · Cited by 346
“[102] found a slight decrease in the ablation rate of copper during an increase of the pulse duration from 200 fs to 4 ps.”
Background
Metadata
- Authors
- Schille, J., Schneider, L., Lickschat, P., Loeschner, U., Ebert, R., & Exner, H.
- Affiliations
- Hochschule Mittweida (DE)
- Venue
- Journal of Laser Applications
- Publisher
- Laser Institute of America
- Published
- 2015-02-01
- Volume
- 27
- Issue
- S2
- ISSN
- 1042-346X (ISSN-L)
- 1938-1387
- OpenAlex
- W1978203857
- Cited by
- 30
- References
- 0
- Citations by year
- 2026: 4 · 2024: 2 · 2023: 1 · 2022: 8 · 2021: 5 · 2020: 4 · 2019: 2 · 2018: 2 · 2017: 1 · 2015: 1
- FWCI
- 1.22
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- Locations
- Journal of Laser Applications (publishedVersion, cc-by)
- Funders
- Bundesministerium für Bildung und Forschung (03IPT506X)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Laser Material Processing Techniques
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Advanced Machining and Optimization Techniques
- Physical Sciences › Materials Science › Materials Chemistry › Laser-Ablation Synthesis of Nanoparticles
- Keywords
- ultrashort pulse laser processing, high pulse repetition frequency, laser micromachining, ablation rate, ablation efficiency, pulse duration, wavelength dependence, surface roughness, machining quality
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
