The DOI matches its Crossref record; 14 of the 14 references it cites were found in a registry or an index.
A review of ultrashort pulsed laser ablation of materials
Abstract
The use of ultrashort pulsed lasers in materials processing is an emerging technology. These lasers have the capability to ablate materials precisely with little or no collateral damage, even with materials that are impervious to laser energy from conventional pulsed lasers. The extreme intensities and short timescale at which ultrashort pulsed lasers operate differentiate them from other lasers. The means of ultrashort pulsed laser generation is discussed; included are a survey of pulse compressor techniques with solid state lasers and a brief discussion of excimer-dye lasers. This is followed by a discussion of specific examples of ultrashort pulsed machining of specific materials, along with mechanistic details. Optical breakdown mechanisms, including electron avalanche ionization and multiphoton absorption are discussed. It is shown that as pulse width increases and intensity decreases, laser damage becomes a stochastic process in which the ultrashort pulsed, high intensity light causes optical breakdown over a very narrow range. This, along with the lack of significant thermal conduction, greatly improves the precision of ultrashort pulsed lasers in micromachining applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Compression of amplified chirped optical pulses
Strickland, D., & Mourou, G. (1985) · Optics Communications · doi:10.1016/0030-4018(85)90120-8 · Cited by 3,937
Femtosecond, picosecond and nanosecond laser ablation of solids
Chichkov, B. N., Momma, C., Nolte, S., Alvensleben, F., & Tünnermann, A. (1996) · Applied Physics A Materials Science & Processing · doi:10.1007/bf01567637 · Cited by 3,066
Laser-Induced Damage in Dielectrics with Nanosecond to Subpicosecond Pulses
Stuart, B. C., Feit, M. D., Rubenchik, A. M., Shore, B. W., & Perry, M. D. (1995) · Physical Review Letters · doi:10.1103/physrevlett.74.2248 · Cited by 1,277
Laser-induced breakdown by impact ionization in SiO2 with pulse widths from 7 ns to 150 fs
Du, D., Liu, X., Korn, G., Squier, J., & Mourou, G. (1994) · Applied Physics Letters · doi:10.1063/1.111350 · Cited by 847
Machining of sub-micron holes using a femtosecond laser at 800 nm
Pronko, P. P., Dutta, S. K., Squier, J., Rudd, J. V., Du, D., & Mourou, G. (1995) · Optics Communications · doi:10.1016/0030-4018(94)00585-i · Cited by 487
Sub-picosecond UV laser ablation of metals
Preuss, S., Demchuk, A., & Stuke, M. (1995) · Applied Physics A Materials Science & Processing · doi:10.1007/bf01538207 · Cited by 468
Sub-10-fs mirror-dispersion-controlled Ti:sapphire laser
Stingl, A., Szipöcs, R., Lenzner, M., Spielmann, C., & Krausz, F. (1995) · Optics Letters · doi:10.1364/ol.20.000602 · Cited by 287
Nanosecond and femtosecond excimer laser ablation of fused silica
Ihlemann, J., Wolff, B., & Simon, P. (1992) · Applied Physics A Solids and Surfaces · doi:10.1007/bf00324203 · Cited by 244
Ablation of polytetrafluoroethylene (Teflon) with femtosecond UV excimer laser pulses
Küper, S., & Stuke, M. (1989) · Applied Physics Letters · doi:10.1063/1.100831 · Cited by 233
Thermophysical effects in laser processing of materials with picosecond and femtosecond pulses
Pronko, P. P., Dutta, S. K., Du, D., & Singh, R. K. (1995) · Journal of Applied Physics · doi:10.1063/1.360570 · Cited by 207
Cited by
Shirk, S. R., & Karver, M. (2003) · Journal of Consulting and Clinical Psychology · doi:10.1037/0022-006x.71.3.452 · Cited by 698
Fabrication of Micro/Nano Structures on Metals by Femtosecond Laser Micromachining
Ahmmed, K., Grambow, C., & Kietzig, A.-M. (2014) · Micromachines · doi:10.3390/mi5041219 · Cited by 466
Low, Z.-X., Chua, Y. T., Ray, B. M., Mattia, D., Metcalfe, I. S., & Patterson, D. A. (2017) · Journal of Membrane Science · doi:10.1016/j.memsci.2016.10.006 · Cited by 465
Three-dimensional hole drilling of silica glass from the rear surface with femtosecond laser pulses
Li, Y., Itoh, K., Watanabe, W., Yamada, K., Kuroda, D., Nishii, J., & Jiang, Y. (2001) · Optics Letters · doi:10.1364/ol.26.001912 · Cited by 252
Kanitz, A., Kalus, M.-R., Gurevich, E. L., Ostendorf, A., Barcikowski, S., & Amans, D. (2019) · Plasma Sources Science and Technology · doi:10.1088/1361-6595/ab3dbe · Cited by 195
Metadata
- Authors
- Shirk, M. D., & Molian, P. A.
- Venue
- Journal of Laser Applications
- Publisher
- Laser Institute of America
- Published
- 1998-02-01
- Volume
- 10
- Issue
- 1
- Pages
- 18-28
- ISSN
- 1042-346X (ISSN-L)
- OpenAlex
- W2020013522
- Cited by
- 416
- References
- 14
- FWCI
- 9.89
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A review of ultrashort pulsed laser ablation of materials. https://app.cochat.ai/papers/10.2351/1.521827
- The paper
- Shirk, M. D., & Molian, P. A. (1998). A review of ultrashort pulsed laser ablation of materials. Journal of Laser Applications. https://doi.org/10.2351/1.521827
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.