The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
Experimental Verification of Models for Microfabricated Piezoelectric Vibration Energy Harvesters
Abstract
Experiments have been performed to verify power-optimized modal models of piezoelectric vibration harvesters for microelectromechanical systems. Such harvesters can power a variety of sensors, and there have been recent national workshops dedicated to harvesting. Detailed experimental results, including displacement histories and electrical output, are provided over a range of frequencies and electrical loadings to compare with (optimized) modal models. The harvester geometry considered is that of a symmetric bimorph macroscale cantilever. Although some experimental work for cantilevered bimorph harvesters has been published, key testing and/or device parameters needed for model verification are missing and/or data at and near power optima (the most interesting operating points) are not provided. Therefore, a detailed set of experiments was performed using power-optimized modeling results to guide the test matrix. Over the broad range of parameters tested, the models accurately predicted all trends and device performance away from device resonances (resonance and antiresonance frequencies). Near the resonance frequencies, the model consistently underpredicts electrical performance, which is satisfactorily attributed (and experimentally supported) to the well-known piezoelectric coupling nonlinearity in the large-strain region. The data presented herein can serve as benchmark data to verify other modeling efforts. The verified models have been used to optimally design microelectromechanical system harvesters for commercial aircraft and microfabrication is ongoing.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A study of low level vibrations as a power source for wireless sensor nodes
Roundy, S., Wright, P. K., & Rabaey, J. (2003) · Computer Communications · doi:10.1016/s0140-3664(02)00248-7 · Cited by 2,819
A Review of Power Harvesting from Vibration Using Piezoelectric Materials
Sodano, H. A., Inman, D. J., & Park, G. (2004) · The Shock and Vibration Digest · doi:10.1177/0583102404043275 · Cited by 1,361
PicoRodio supports ad hoc ultra-low power wireless networking
Rabaey, J. M., Ammer, M. J., da Silva, J. L., Patel, D., & Roundy, S. (2000) · Computer · doi:10.1109/2.869369 · Cited by 1,010
Energy Scavenging for Wireless Sensor Networks: with Special Focus on Vibrations
Roundy, S., Wright, P. K., & Rabaey, J. M. (2004) · Springer eBooks · doi:10.1007/978-1-4615-0485-6 · Cited by 790
DESIGN CONSIDERATIONS FOR MEMS-SCALE PIEZOELECTRIC MECHANICAL VIBRATION ENERGY HARVESTERS
DUTOIT, N. E., WARDLE, B. L., & KIM, S.-G. (2005) · Integrated Ferroelectrics · doi:10.1080/10584580590964574 · Cited by 759
Self-citationEstimation of Electric Charge Output for Piezoelectric Energy Harvesting
Sodano, H. A., Park, G., & Inman, D. J. (2004) · Strain · doi:10.1111/j.1475-1305.2004.00120.x · Cited by 750
Self-powered signal processing using vibration-based power generation
Amirtharajah, R., & Chandrakasan, A. P. (1998) · IEEE Journal of Solid-State Circuits · doi:10.1109/4.668982 · Cited by 621
Energy Scavenging for Wireless Sensor Networks: with Special Focus on Vibrations
Roundy, S., Wright, P. K., & Rabaey, J. M. (2012) · CERN Document Server (European Organization for Nuclear Research) · Cited by 552
Issues in mathematical modeling of piezoelectric energy harvesters
Erturk, A., & Inman, D. J. (2008) · Smart Materials and Structures · doi:10.1088/0964-1726/17/6/065016 · Cited by 480
An improved analysis of the SSHI interface in piezoelectric energy harvesting
Shu, Y. C., Lien, I. C., & Wu, W. J. (2007) · Smart Materials and Structures · doi:10.1088/0964-1726/16/6/028 · Cited by 324
Trends in low power digital signal processing
Chandrakasan, A. P., Amirtharajah, R., Goodman, J., et al. (2002) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas.1998.699014 · Cited by 66
Cited by
Erturk, A., & Inman, D. J. (2009) · Smart Materials and Structures · doi:10.1088/0964-1726/18/2/025009 · Cited by 1,417
A Distributed Parameter Electromechanical Model for Cantilevered Piezoelectric Energy Harvesters
Erturk, A., & Inman, D. J. (2008) · Journal of Vibration and Acoustics · doi:10.1115/1.2890402 · Cited by 1,249
A comprehensive review on vibration energy harvesting: Modelling and realization
Wei, C., & Jing, X. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.073 · Cited by 952
Safaei, M., Sodano, H. A., & Anton, S. R. (2019) · Smart Materials and Structures · doi:10.1088/1361-665x/ab36e4 · Cited by 874
“In order to improve the original lumped-parameter models, researchers began to investigated distributed parameter models utilizing the Rayleigh-Ritz discretization, which gives more accurate solutions [279, 281, 282].”
MethodOn the Role of Nonlinearities in Vibratory Energy Harvesting: A Critical Review and Discussion
Daqaq, M. F., Masana, R., Erturk, A., & Dane Quinn, D. (2014) · Applied Mechanics Reviews · doi:10.1115/1.4026278 · Cited by 823
Metadata
- Authors
- duToit, N. E., & Wardle, B. L.
- Venue
- AIAA Journal
- Published
- 2007-05
- Volume
- 45
- Issue
- 5
- Pages
- 1126-1137
- ISSN
- 0001-1452 (ISSN-L)
- 1533-385X
- OpenAlex
- W2146752065
- Cited by
- 273
- References
- 11
- FWCI
- 26.86
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.