The Effects of Microgravity on Extrusion Based Additive Manufacturing
The DOI matches its Crossref record.
Abstract
Made In Space, Inc. participated in four weeks of microgravity testing with NASA’s Flight Opportunities Program during the Fall of 2011 and Summer of 2013. The company tested the effects of microgravity on custom built and commercially available extrusion additive manufacturing machines, more commonly known as 3D printers. The testing took place on board a modified Boeing 727 aircraft flown by the Zero-G corporation, in conjunction with NASA’s Reduced Gravity Office and Flight Opportunities Program. The company has utilized the knowledge gained through this campaign on the project that will deliver the first 3D printer to the International Space Station (ISS). 3D printing in space is an enabling technology that is crucial to the exploration of space beyond the low Earth orbit environment. In order for 3D printing to finally be realized as a permanent fixture in space exploration, the behavior must be fully understood in microgravity. Various 3D printers were flown and tested, as well as multiple individual sub-components. With some modification to the key systems, Made In Space was able to demonstrate that additive manufacturing with extrusion-based machines functions similarly in microgravity as it does on the ground, allowing for a full proof of concept. The microgravity flights enabled the Technology Readiness Level (TRL) of the technology to be elevated to a TRL-6.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Prater, T., Werkheiser, N., Ledbetter, F., Timucin, D., Wheeler, K., & Snyder, M. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-2827-7 · Cited by 173
Self-citationExtra-terrestrial construction processes – Advancements, opportunities and challenges
Lim, S., Prabhu, V. L., Anand, M., & Taylor, L. A. (2017) · Advances in Space Research · doi:10.1016/j.asr.2017.06.038 · Cited by 134
“The tests enabled measurement of the correlation between gravity and the layer thickness of the printed specimens using commercially available FDM 3D printers: MakerBot and BFB 3000 (Snyder et al. 2013).”
Sustainable in-situ resource utilization on the Moon
Ellery, A. (2020) · Planetary and Space Science · doi:10.1016/j.pss.2020.104870 · Cited by 96
Analysis of specimens from phase I of the 3D printing in Zero G technology demonstration mission
Prater, T., Bean, Q., Werkheiser, N., Grguel, R., Beshears, R., Rolin, T., Huff, T., Ryan, R., Ledbetter, F., & Ordonez, E. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-09-2016-0142 · Cited by 65
Solar-Powered Additive Manufacturing in Extraterrestrial Environments
Anderson, S. D., & Thangavelautham, J. (2021) · Earth and Space 2021 · doi:10.1061/9780784483374.068 · Cited by 15
Metadata
- Authors
- Snyder, M., Dunn, J., & Gonzalez, E.
- Venue
- AIAA SPACE 2013 Conference and Exposition
- Published
- 2013-09-10
- OpenAlex
- W2320674800
- Cited by
- 61
- References
- 0
- FWCI
- 5.96
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.