CoChat

Critical Metals in the Path towards the Decarbonisation of the EU Energy Sector: Assessing Rare Metalsas Supply-Chain Bottlenecks in Low-Carbon Energy Technologies

M. Raymond, Evangelos Tzimas, Willis Peter, Josephine R. T. Arendorf, Luis Alberto Tercero Espinoza · 2013 · Joint Research Centre (European Commission)
Cited by 129

The DOI matches its OpenAlex record.

Abstract

In order to tackle climate change, to increase energy supply security and to foster the sustainability and\ncompetitiveness of the European economy, the EU has made the transition to a low-carbon economy a\ncentral policy priority. This report builds on the first study conducted in 2011 (Critical Metals in Strategic\nEnergy Technologies), where critical metals were identified which could become a bottleneck to the\nsupply-chain of various low-carbon energy technologies. The first study concentrated on the six SET-Plan\ntechnologies, namely: wind, solar (both PV and CSP), CCS, nuclear fission, bioenergy and the electricity\ngrid. Fourteen metals were identified to be a cause for concern. After taking into account market and\ngeopolitical parameters, five metals were labelled ‘critical’, namely: tellurium, indium, gallium, neodymium\nand dysprosium. The potential supply chain constraints for these materials were most applicable to\nthe deployment of wind and solar energy technologies. In the follow-up study reported here, other\nenergy and low-carbon technologies are investigated that not only play an important role in the EU's path\ntowards decarbonisation but also may compete for the same metals as identified in the six SET-Plan\ntechnologies. Eleven technologies are analysed including fuel cells, electricity storage, electric vehicles\nand lighting. As in the first report, sixty metals, i.e. metallic elements, metallic minerals and metalloids\nare considered; only iron, aluminium and radioactive elements were specifically excluded. Graphite was\nalso included, reflecting its status as a critical raw material. Where possible, the study models the implications\nfor materials demand as a result of the scenarios described in the EU Energy Roadmap 2050.\nConsequently, the results obtained in the first study are updated to reflect the data that has become\navailable in the roadmap. This second study found that eight metals have a high criticality rating and are\ntherefore classified as ‘critical’. These are the six rare earth elements (dysprosium, europium, terbium,\nyttrium, praseodymium and neodymium), and the two metals gallium and tellurium. Four metals (graphite,\nrhenium, indium and platinum) are found to have a medium-to-high rating and are classified as ‘near\ncritical’, suggesting that the market conditions for these metals should be monitored in case the markets\nfor these metals deteriorate thereby increasing the risk of supply chain bottlenecks. Metals demand in\nthe electric vehicle, wind, solar and lighting sectors were identified to be of particular concern. As in the\nfirst report, ways of mitigating the supply-chain risks for the critical metals are considered. These fall into\nthree categories; increasing primary supply, reuse/recycling and substitution In addition, a number of\ntopics were identified as possibly meriting further research, but could not be considered within the\nimmediate scope of this study. These include conducting further studies to look at raw materials requirements\nfor hybrid and electric vehicles for a wider range of technology uptake and penetration\nscenarios; developing new and more detailed scenarios for the uptake and technology mix of options for\nstationary energy storage; undertaking similar studies in defence and aerospace; improving statistics on\nthe contribution of recycling to world production for a number of metals; and investigating the contribution\nof greater traceability and transparency to reducing raw materials supply risk. Finally, it is important\nnot to overstate the bottlenecks due to the risks of raw material shortages for key decarbonisation\ntechnologies. This is because there are still many years before the large uptake of some technologies and\nin the coming years, there are numerous options that will become available to mitigate the risks identified.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

OpenAlex · 10.2790/46338

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

Metadata

Authors
Raymond, M., Tzimas, E., Peter, W., Arendorf, J. R. T., & Espinoza, L. A. T.
Venue
Joint Research Centre (European Commission)
Publisher
European Commission
Published
2013-01-01
OpenAlex
W2615624622
Cited by
129
References
0
FWCI
15.50
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.