The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
Field methods for measurement of fluvial sediment
Open accessAbstract
This report describes equipment and procedures for collection and measurement of fluvial sediment.The complexity of the hydrologic and physical environments and man's ever-increasing data needs make it essential for those responsible for the collection of sediment data to be aware of basic concepts involved in processes of erosion, transport, deposition of sediment, and equipment, and procedures necessary to representatively sample and measure sediment data.In addition to an introduction, the report has two major sections.The "Sediment-Sampling Equipment" section encompasses discussions of characteristics and limitations of various models of depth-and point-integrating samplers, single-stage samplers, bed-material samplers, bedload samplers, automatic-pumping samplers, and support equipment.The "Sediment-Sampling Techniques" section includes discussions of representative sampling criteria, characteristics of sampling sites, equipment selection relative to the sampling conditions and needs, depth-and point-integration techniques, surface and dip sampling, determination of transit rates, sampling programs and related data, cold-weather sampling, bed-material and bedload sampling, measuring total sediment discharge, and reservoir sedimentation rates.1. To allow water to enter the nozzle isokinetically.(In isokinetic sampling, water approaching the nozzle undergoes no change in speed or direction as it enters the orifice.)
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A method of sampling coarse river‐bed material
(1954) · Eos, Transactions American Geophysical Union · doi:10.1029/tr035i006p00951 · Cited by 2,377
Formulas for Bed-Load transport
Meyer-Peter, E., & Müller, R. (1948) · Research Repository (Delft University of Technology) · Cited by 2,013
The Bed-Load Function for Sediment Transportation in Open Channel Flows
Einstein, H. A., & Einstein, H. A. (1950) · AgEcon Search (University of Minnesota, USA) · doi:10.22004/ag.econ.156389 · Cited by 1,585
Fluvial Processes in Geomorphology
Sparks, B. W., Leopold, L. B., Wolman, M. G., & Miller, J. P. (1965) · The Geographical Journal · doi:10.2307/1793758 · Cited by 1,124
Summary of alluvial channel data from flume experiments, 1956-61
Guy, H. P., Simons, D. B., & Richardson, E. V. (1966) · USGS professional paper · doi:10.3133/pp462i · Cited by 636
Discharge measurements at gaging stations
(1969) · doi:10.3133/twri03a8 · Cited by 626
Computation of fluvial-sediment discharge
(1972) · doi:10.3133/twri03c3 · Cited by 455
B., W. G. V., & Thornbury, W. D. (1955) · The Geographical Journal · doi:10.2307/1791828 · Cited by 350
A field calibration of the sediment-trapping characteristics of the Helley-Smith bed-load sampler
Emmett, W. W. (1980) · Professional Paper · doi:10.3133/pp1139 · Cited by 226
The channels and waters of the upper Salmon River area, Idaho
Emmett, W. W. (1975) · Professional Paper · doi:10.3133/pp870a · Cited by 162
Discharge of sands and mean-velocity relationships in sand-bed streams
Colby, B. R. (1964) · USGS professional paper · doi:10.3133/pp462a · Cited by 124
Laboratory hydraulic calibration of the Helley-Smith bedload sediment sampler
Druffel, L., Emmett, W. W., Schneider, V. R., & Skinner, J. V. (1976) · Antarctica A Keystone in a Changing World · doi:10.3133/ofr76752 · Cited by 40
Cited by
Initial hydrologic and geomorphic response following a wildfire in the Colorado Front Range
Moody, J. A., & Martin, D. A. (2001) · Earth Surface Processes and Landforms · doi:10.1002/esp.253 · Cited by 493
Causes for the decline of suspended‐sediment discharge in the Mississippi River system, 1940–2007
Meade, R. H., & Moody, J. A. (2010) · Hydrological Processes · doi:10.1002/hyp.7477 · Cited by 466
Horowitz, A. J. (2003) · Hydrological Processes · doi:10.1002/hyp.1299 · Cited by 459
Shelton, L. R. (1994) · Open-File Report · doi:10.3133/ofr94455 · Cited by 402
Gravel-Bed Rivers VI: From Process Understanding to River Restoration
(2007) · Developments in Earth Surface Processes · doi:10.1016/s0928-2025(07)x1100-3 · Cited by 362
Metadata
- Authors
- Edwards, T. K., & Glysson, G. D.
- Venue
- Open-File Report
- Publisher
- US Geological Survey
- Published
- 1988
- ISSN
- 0196-1497 (ISSN-L)
- 2331-1258
- OpenAlex
- W1517811736
- Cited by
- 918
- References
- 12
- Type
- report
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.