The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Microscopic Simulation Model Calibration and Validation: Case Study of VISSIM Simulation Model for a Coordinated Actuated Signal System
Abstract
Microscopic simulation models have been widely used in both transportation operations and management analyses because simulation is safer, less expensive, and faster than field implementation and testing. While these simulation models can be advantageous to engineers, the models must be calibrated and validated before they can be used to provide meaningful results. However, the transportation profession has not established any formal or consistent guidelines for the development and application of these models. In practice, simulation model–based analyses have often been conducted under default parameter values or bestguessed values. This is mainly due to either difficulties in field data collection or lack of a readily available procedure for simulation model calibration and validation. A procedure was proposed for microscopic simulation model calibration and validation and an example case study is presented with real-world traffic data from Route 50 on Lee Jackson Highway in Fairfax, Virginia. The proposed procedure consisted of nine steps: ( a) measure of effectiveness selection, ( b) data collection, ( c) calibration parameter identification, ( d) experimental design, ( e) run simulation, ( f) surface function development, ( g) candidate parameter set generations, ( h) evaluation, and ( i) validation through new data collection. The case study indicates that the proposed procedure appears to be properly calibrating and validating the VISSIM simulation model for the test-bed network.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An Introduction to Statistical Methods and Data Analysis
(1994) · Technometrics · doi:10.1080/00401706.1994.10485832 · Cited by 5,346
An Introduction to Statistical Methods and Data Analysis
Ziegel, E. R., & Ott, L. (1994) · Technometrics · doi:10.2307/1269399 · Cited by 336
Cited by
Calibration and validation of simulated vehicle safety performance at signalized intersections
Cunto, F., & Saccomanno, F. F. (2008) · Accident Analysis & Prevention · doi:10.1016/j.aap.2008.01.003 · Cited by 286
Traffic Signal Control with Connected Vehicles
Goodall, N. J., Smith, B. L., & Park, B. (. (2013) · Transportation Research Record: Journal of the Transportation Research Board · doi:10.3141/2381-08 · Cited by 276
Self-citationAlam, M. J., & Habib, M. A. (2018) · Procedia Computer Science · doi:10.1016/j.procs.2018.04.066 · Cited by 40
Metadata
- Authors
- Park, B. (., & Schneeberger, J. D.
- Venue
- Transportation Research Record: Journal of the Transportation Research Board
- Publisher
- SAGE Publications
- Published
- 2003-01
- Volume
- 1856
- Issue
- 1
- Pages
- 185-192
- ISSN
- 0361-1981 (ISSN-L)
- 2169-4052
- OpenAlex
- W2040411888
- Cited by
- 260
- References
- 2
- FWCI
- 10.32
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.