The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
Crystalline structure of annealed polylactic acid and its relation to processing
Open accessAbstract
This paper focuses on the crystalline structure of injection moulding grade poly(lactic acid) (PLA) and the effect of crystalline structure on the processing.The research is induced by the significant differences in crystallinity of the pure PLA resin, and the injection moulded product, and thus the reprocessing of PLA products.2 mm thick PLA sheets were injection moulded and re-crystallized in a conventional oven at 60-140°C, for 10-60 minutes to achieve various crystalline contents.The properties of these sheets were investigated by dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), and wide angle X-ray diffraction (WAXD).In a processing plant the rejected parts are recycled and reused as raw material for further cycles, accordingly the various crystalline content PLA products were reprocessed as a resin, to investigate the processing itself.When PLA products are reprocessed, due to the adherent feature of amorphous PLA processing difficulties may occur.This adherent effect of the amorphous PLA was investigated and characterized.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
Biodegradable polymers for food packaging: a review
Siracusa, V., Rocculi, P., Romani, S., & Rosa, M. D. (2008) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2008.07.003 · Cited by 2,126
Polymer blends and composites from renewable resources
Yu, L., Dean, K., & Li, L. (2006) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.03.002 · Cited by 2,107
Poly(lactic acid): plasticization and properties of biodegradable multiphase systems
Martin, O., & Avérous, L. (2001) · Polymer · doi:10.1016/s0032-3861(01)00086-6 · Cited by 1,562
Biodegradable Multiphase Systems Based on Plasticized Starch: A Review
Avérous, L. (2004) · Journal of Macromolecular Science, Part C: Polymer Reviews · doi:10.1081/mc-200029326 · Cited by 834
Effect of nucleation and plasticization on the crystallization of poly (lactic acid)
Li, H., & Huneault, M. A. (2007) · Polymer · doi:10.1016/j.polymer.2007.09.020 · Cited by 810
Pan, P., Kai, W., Zhu, B., Dong, T., & Inoue, Y. (2007) · Macromolecules · doi:10.1021/ma071258d · Cited by 679
Properties of thermoplastic blends: starch–polycaprolactone
Averous, L. (2000) · Polymer · doi:10.1016/s0032-3861(99)00636-9 · Cited by 566
Pan, P., Zhu, B., Kai, W., Dong, T., & Inoue, Y. (2008) · Macromolecules · doi:10.1021/ma800343g · Cited by 358
Heat capacity of poly(lactic acid)
Pyda, M., Bopp, R. C., & Wunderlich, B. (2004) · The Journal of Chemical Thermodynamics · doi:10.1016/j.jct.2004.05.003 · Cited by 333
Reducing water absorption in compostable starch-based plastics
Gáspár, M., Benkő, Z., Dogossy, G., Réczey, K., & Czigány, T. (2005) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.03.012 · Cited by 228
Starch‐based biodegradable blends: morphology and interface properties
Schwach, E., & Avérous, L. (2004) · Polymer International · doi:10.1002/pi.1636 · Cited by 187
Blends of thermoplastic starch and polyesteramide: processing and properties
Avérous, L., Fauconnier, N., Moro, L., & Fringant, C. (2000) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(20000516)76:7<1117::aid-app16>3.0.co;2-w · Cited by 178
Biodegradable plastics: a solution or a challenge?
Ren, X. (2002) · Journal of Cleaner Production · doi:10.1016/s0959-6526(02)00020-3 · Cited by 177
Avérous, L., & Fringant, C. (2001) · Polymer Engineering & Science · doi:10.1002/pen.10768 · Cited by 158
The processing of starch as a thermoplastic
Stepto, R. F. T. (2003) · Macromolecular Symposia · doi:10.1002/masy.200351123 · Cited by 122
Radiation induced crystallinity damage in poly(L-lactic acid)
Kantoğlu, Ö., & Güven, O. (2002) · Nuclear Instruments and Methods in Physics Research Section B Beam Interactions with Materials and Atoms · doi:10.1016/s0168-583x(02)01473-8 · Cited by 49
Thiré, R. M. D. S. M. (2009) · CRC Press eBooks · doi:10.1201/9781420080247-c6 · Cited by 19
Mohanty (2000) · doi:10.1002/(sici)1439-2054(20000301)276:1
Cited by
Mechanical properties and shape memory effect of 3D-printed PLA-based porous scaffolds
Senatov, F. S., Niaza, K. V., Zadorozhnyy, M. Y., Maksimkin, A. V., Kaloshkin, S. D., & Estrin, Y. Z. (2016) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2015.11.036 · Cited by 547
Liu, Z., Wang, Y., Wu, B., Cui, C., Guo, Y., & Yan, C. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-03332-x · Cited by 469
Comparison of injection moulded, natural fibre-reinforced composites with PP and PLA as matrices
Mofokeng, J. P., Luyt, A. S., Tábi, T., & Kovács, J. (2012) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705711423291 · Cited by 391
Self-citationBhandari, S., Lopez-Anido, R. A., & Gardner, D. J. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.100922 · Cited by 355
Crystallization kinetics of poly(lactic acid)-talc composites
Battegazzore, D., Bocchini, S., & Frache, A. (2011) · Express Polymer Letters · doi:10.3144/expresspolymlett.2011.84 · Cited by 345
Metadata
- Authors
- Tabi, T., Sajo, I. E., Szabo, F., Luyt, A. S., & Kovacs, J. G.
- Venue
- Express Polymer Letters
- Published
- 2010
- Volume
- 4
- Issue
- 10
- Pages
- 659-668
- ISSN
- 1788-618X (ISSN-L)
- OpenAlex
- W2324045270
- Cited by
- 316
- References
- 19
- FWCI
- 6.28
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.