A critical review of fused deposition modeling 3D printing technology in manufacturing polylactic acid parts

A review on 3D micro-additive manufacturing technologies

Vaezi, M., Seitz, H., & Yang, S. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4605-2 · Cited by 1,294 · see citing works

Effect of processing conditions on the bonding quality of FDM polymer filaments

Sun, Q., Rizvi, G. M., Bellehumeur, C. T., & Gu, P. (2008) · Rapid Prototyping Journal · doi:10.1108/13552540810862028 · Cited by 1,285 · see citing works

Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites

Tian, X., Liu, T., Yang, C., Wang, Q., & Li, D. (2016) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.05.032 · Cited by 1,166 · see citing works

Modeling of Bond Formation Between Polymer Filaments in the Fused Deposition Modeling Process

Bellehumeur, C. T., Li, L., Sun, Q., & Gu, P. (2004) · Journal of Manufacturing Processes · doi:10.1016/s1526-6125(04)70071-7 · Cited by 774 · see citing works

Experimental characterization and micrography of 3D printed PLA and PLA reinforced with short carbon fibers

Ferreira, R. T. L., Amatte, I. C., Dutra, T. A., & Bürger, D. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2017.05.013 · Cited by 767 · see citing works

Rapid prototyping of continuous carbon fiber reinforced polylactic acid composites by 3D printing

Li, N., Li, Y., & Liu, S. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2016.07.025 · Cited by 712 · see citing works

Measurement of anisotropic compressive strength of rapid prototyping parts

Lee, C. S., Kim, S. G., Kim, H. J., et al. (2007) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2006.11.095 · Cited by 467 · see citing works

Mechanical Property Optimization of FDM PLA in Shear with Multiple Objectives

Torres, J., Cotelo, J., Karl, J., & Gordon, A. P. (2015) · JOM · doi:10.1007/s11837-015-1367-y · Cited by 382 · see citing works

Effects of part build orientations on fatigue behaviour of FDM-processed PLA material

Afrose, M. F., Masood, S. H., Iovenitti, P., Nikzad, M., & Sbarski, I. (2015) · Progress in Additive Manufacturing · doi:10.1007/s40964-015-0002-3 · Cited by 361 · see citing works

Effects of layer thickness and binder saturation level parameters on 3D printing process

Vaezi, M., & Chua, C. K. (2010) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-010-2821-1 · Cited by 345 · see citing works

Fabrication of highly conductive graphene flexible circuits by 3D printing

Zhang, D., Chi, B., Li, B., et al. (2016) · Synthetic Metals · doi:10.1016/j.synthmet.2016.03.014 · Cited by 340 · see citing works

Impact of the Fused Deposition (FDM) Printing Process on Polylactic Acid (PLA) Chemistry and Structure

Cuiffo, M., Snyder, J. E., Elliott, A., Romero, N., Kannan, S., & Halada, G. P. (2017) · Applied Sciences · doi:10.3390/app7060579 · Cited by 325 · see citing works

Crystalline structure of annealed polylactic acid and its relation to processing

Tábi, T., Sajó, I. E., Szabó, F., Luyt, A. S., & Kovács, J. G. (2010) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2010.80 · Cited by 314 · see citing works

Welding of 3D-printed carbon nanotube–polymer composites by locally induced microwave heating

Sweeney, C. B., Lackey, B. A., Pospisil, M. J., Achee, T. C., Hicks, V. K., Moran, A. G., Teipel, B. R., Saed, M. A., & Green, M. J. (2017) · Science Advances · doi:10.1126/sciadv.1700262 · Cited by 313 · see citing works

An approach for mechanical property optimization of fused deposition modeling with polylactic acid via design of experiments

Torres, J., Cole, M., Owji, A., DeMastry, Z., & Gordon, A. P. (2016) · Rapid Prototyping Journal · doi:10.1108/rpj-07-2014-0083 · Cited by 296 · see citing works

3D printing of shape memory polymer for functional part fabrication

Yang, Y., Chen, Y., Wei, Y., & Li, Y. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7843-2 · Cited by 295 · see citing works

Infrared preheating to improve interlayer strength of big area additive manufacturing (BAAM) components

Kishore, V., Ajinjeru, C., Nycz, A., Post, B., Lindahl, J. M., Kunc, V., & Duty, C. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.11.008 · Cited by 295 · see citing works

3D-Bioprinting of Polylactic Acid (PLA) Nanofiber–Alginate Hydrogel Bioink Containing Human Adipose-Derived Stem Cells

Narayanan, L. K., Huebner, P., Fisher, M. B., Spang, J. T., Starly, B., & Shirwaiker, R. A. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00196 · Cited by 293 · see citing works

Improving the impact strength of Poly(lactic acid) (PLA) in fused layer modeling (FLM)

Wang, L., Gramlich, W., & Gardner, D. (2017) · Polymer · doi:10.1016/j.polymer.2017.03.011 · Cited by 292 · see citing works

On reducing anisotropy in 3D printed polymers via ionizing radiation

Shaffer, S., Yang, K., Vargas, J. I., et al. (2014) · Polymer · doi:10.1016/j.polymer.2014.07.054 · Cited by 262 · see citing works

An in-process laser localized pre-deposition heating approach to inter-layer bond strengthening in extrusion based polymer additive manufacturing

Ravi, A. K., Deshpande, A., & Hsu, K. (2016) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2016.08.007 · Cited by 224 · see citing works

Additive manufacturing technology: the status, applications, and prospects

Bahnini, I., Rivette, M., Rechia, A., et al. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-1932-y · Cited by 185 · see citing works

Analysis of tensile strength of a fused filament fabricated PLA part using an open-source 3D printer

Rajpurohit, S. R., & Dave, H. K. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-3047-x · Cited by 165 · see citing works

The crystallization behavior and mechanical properties of polylactic acid in the presence of a crystal nucleating agent

Tang, Z.-B., Zhang, C., Liu, X.-Q., & Zhu, J. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.34799 · Cited by 157 · see citing works

Mechanical and electrical properties of multi-wall carbon nanotube/poly(lactic acid) composites

Kuan, C., Kuan, H., Ma, C.-C. M., et al. (2007) · Journal of Physics and Chemistry of Solids · doi:10.1016/j.jpcs.2007.10.060 · Cited by 148 · see citing works

Interlayer diffusion of surface segregating additives to improve the isotropy of fused deposition modeling products

Levenhagen, N. P., & Dadmun, M. (2018) · Polymer · doi:10.1016/j.polymer.2018.01.031 · Cited by 113 · see citing works

Bimodal molecular weight samples improve the isotropy of 3D printed polymeric samples

Levenhagen, N. P., & Dadmun, M. (2017) · Polymer · doi:10.1016/j.polymer.2017.06.057 · Cited by 107 · see citing works

Fabrication of 3D porous poly(lactic acid)-based composite scaffolds with tunable biodegradation for bone tissue engineering

Mao, D., Li, Q., Li, D., et al. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.01.016 · Cited by 99 · see citing works

3D-printed poly(vinylidene fluoride)/carbon nanotube composites as a tunable, low-cost chemical vapour sensing platform

Kennedy, Z. C., Christ, J. F., Evans, K. A., et al. (2017) · Nanoscale · doi:10.1039/c7nr00617a · Cited by 94 · see citing works

Incorporation of graphitic nano‐filler and poly(lactic acid) in fused deposition modeling

Wang, Y., Zhang, J., Wu, J. R., Wang, X., & Deng, Y. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.44703 · Cited by 93 · see citing works

The microstructure and mechanical properties of 3D printed carbon nanotube‐polylactic acid composites

Patanwala, H. S., Hong, D., Vora, S. R., Bognet, B., & Ma, A. W. K. (2017) · Polymer Composites · doi:10.1002/pc.24494 · Cited by 93 · see citing works

Fabrication of Biomedical Prototypes with Locally Controlled Properties Using FDM

Gu, P., & Li, L. (2002) · CIRP Annals · doi:10.1016/s0007-8506(07)61495-4 · Cited by 61 · see citing works

Temperature-dependent electrical resistance of conductive polylactic acid filament for fused deposition modeling

Daniel, F., Patoary, N. H., Moore, A. L., et al. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-2490-z · Cited by 56 · see citing works

Further insights on the structural aspects of PLA2 inhibition by γ-hydroxybutenolide-containing natural products: a comparative study on petrosaspongiolides M–R

Monti, M. C., Casapullo, A., Riccio, R., et al. (2004) · Bioorganic & Medicinal Chemistry · doi:10.1016/j.bmc.2003.12.038 · Cited by 40 · see citing works

Experimental Study of the Cooling Characteristics of Polymer Filaments in FDM and Impact on the Mesostructures and Properties of Prototypes

Sun, Q., Rizvi, G. M., Bellehumeur, C. T., et al. (2003) · doi:10.26153/tsw/5566 · Cited by 38 · see citing works

Solution‐state NMR analysis of hydroxymethylated resorcinol cured in the presence of crude milled‐wood lignin from Acer saccharum

Yelle, D. J. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45398 · Cited by 37 · see citing works

Heparin‐conjugated star‐shaped PLA for improved biocompatibility

Go, D. H., Joung, Y. K., Park, S. Y., Park, Y., & Park, K. D. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31690 · Cited by 36 · see citing works

Electron beam effect on the tensile properties and topology of jute fibers and the interfacial strength of jute-PLA green composites

Ji, S. G., Cho, D., Park, W. H., et al. (2010) · Macromolecular Research · doi:10.1007/s13233-010-0916-z · Cited by 34 · see citing works

Fused deposition modeling with localized pre-deposition heating using forced air

Partain, S. C. (2007) · Montana State University ScholarWorks (Montana State University) · Cited by 32 · see citing works

FEASIBILITY STUDY OF ULTRASONIC FREQUENCY APPLICATION ON FDM TO IMPROVE PARTS SURFACE FINISH

Maidin, S., Muhamad, M. K., & Pei, E. (2015) · Jurnal Teknologi · doi:10.11113/jt.v77.6983 · Cited by 30 · see citing works

Crystallization behaviors of poly(lactic acid) composites fabricated using functionalized eggshell powder and poly(ethylene glycol)

Li, Y., Han, C., Yu, Y., Xiao, L., & Shao, Y. (2018) · Thermochimica Acta · doi:10.1016/j.tca.2018.03.011 · Cited by 24 · see citing works

Preparation and mechanical properties of nano-silica/UPR polymer composite

Wang, Y., Guo, Y. H., Cui, R. X., et al. (2013) · Science and Engineering of Composite Materials · doi:10.1515/secm-2013-0051 · Cited by 23 · see citing works

The valency of change

Heginbotham, W. B. (1989) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/bf02601506 · Cited by 21 · see citing works

Mechanical and thermomechanical properties of PLA/Man‐made cellulose green composites modified with functional chain extenders—A comprehensive study

Jaszkiewicz, A., Meljon, A., & Bledzki, A. K. (2016) · Polymer Composites · doi:10.1002/pc.24122 · Cited by 18 · see citing works

Viscosity and die swell of acrylonitrile‐butadiene‐styrene filled with glass beads and glass fibers

Yilmazer, Ü. (1989) · Polymer Composites · doi:10.1002/pc.750100102 · Cited by 16 · see citing works

Metallization of PLA plastics prepared by FDM-RP process and evaluation of corrosion and hardness characteristics

Arun, K., Aravindh, K., Raja, K., et al. (2018) · Materials Today Proceedings · doi:10.1016/j.matpr.2018.02.299 · Cited by 16 · see citing works

Intelligent planning and scheduling systems

Kusiak, A. (1987) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/bf02601480 · Cited by 9 · see citing works

Relation between Surface Roughness and Overlap Interval in Fused Deposition Modeling

Ahn, D. K., Kweon, J., Choi, J. H., et al. (2011) · Advanced materials research · doi:10.4028/www.scientific.net/amr.264-265.1625 · Cited by 9 · see citing works

Research on enhancement of GFRP-anchor’s torsional strength

Wang, Y., Wang, Z., Cheng-jin, S., et al. (2012) · Science and Engineering of Composite Materials · doi:10.1515/secm-2011-0141 · Cited by 9 · see citing works

Evaluation of directional mechanical properties of 3D printed polymer parts

Yang, J., Zhao, Z., & Park, S. (2015) · International Conference on Control, Automation and Systems (ICCAS) · doi:10.1109/iccas.2015.7364685 · Cited by 5 · see citing works

Crystallization Behavior of PLA/PEG/Nucleating Agent Blends

Dai, J. X., Yang, Q., & Liu, B. J. (2013) · Advanced materials research · doi:10.4028/www.scientific.net/amr.807-809.578 · Cited by 4 · see citing works

Numerical Simulation of a New Nozzle Based on the Principle of FDM Forming Performance

Zhao, C., & Yang, G. (2015) · International Journal of Control and Automation · doi:10.14257/ijca.2015.8.10.16 · Cited by 3 · see citing works

3D/4D Printing of Polymers: Fused Deposition Modelling (FDM), Selective Laser Sintering (SLS), and Stereolithography (SLA)

Kafle, A., Luis, E., Silwal, R., Pan, H. M., Shrestha, P. L., & Bastola, A. K. (2021) · Polymers · doi:10.3390/polym13183101 · Cited by 587 · see citing works

Synthesis and Biological Application of Polylactic Acid

Li, G., Zhao, M., Xu, F., Yang, B., Li, X., Meng, X., Teng, L., Sun, F., & Li, Y. (2020) · Molecules · doi:10.3390/molecules25215023 · Cited by 492 · see citing works

Application of PLCL as a biodegradable polymer in biomedical engineering

Zhao, Y., & Liu, H. (2026) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-026-07016-3 · Cited by 7 · see citing works

A preliminary study on FDM prototype surface roughness

Khan, S. F., Salleh, A. F., Sharif, S., et al. (2006) · Cited by 2 · see citing works

Different Strategies for Rapid Prototyping of Digital Bas-Reliefs

Carfagni, M., & Puggelli, L. (2014) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.510.163 · Cited by 2 · see citing works

Fit accuracy of resin crown on a dental model fabricated using fused deposition modeling 3D printing and a polylactic acid filament

Nagata, K., Muromachi, K., Kouzai, Y., Inaba, K., Inoue, E., Fuchigami, K., Nihei, T., Atsumi, M., Kimoto, K., & Kawana, H. (2022) · Journal of Prosthodontic Research · doi:10.2186/jpr.jpr_d_21_00325 · Cited by 16 · see citing works

Optimize Print Speed and Laser Power of the 3D Printing Technology Selective Laser Sintering (SLS) for Mixture of Powder Materials Green Bean and Polylactic Acid (GBP/PLA)

Dinh, B. B., Guo, Y., Nguyen, T. T., et al. (2020) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/782/2/022111 · Cited by 8 · see citing works

Parametric Investigations of 3D-Printing of Fused Deposition Manufactured (FDM) Structures of Polylactic Acid (PLA)

Sapkal, S. (2020) · International Journal for Research in Applied Science and Engineering Technology · doi:10.22214/ijraset.2020.32486 · Cited by 3 · see citing works