The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Fiber-Bridging Constitutive Law of Engineered Cementitious Composites
Open accessAbstract
This paper is on modeling and measuring fiber-bridging constitutive law of Engineered Cementitious Composites (ECC), a high performance fiber-reinforced cementitious composite featuring high tensile ductility. Fiber-bridging constitutive law plays an important role in the multiple cracking behavior of ECC. Therefore, proper control of fiber-bridging behavior through tailoring material microstructure is the key to successfully designing tensile strain-hardening ECC. In this paper, an analytical fiber-bridging model of ECC which connects material constituent parameters and composite properties, built on a previous simplified version, was proposed. To improve accuracy of crack opening prediction, new mechanisms of fiber/matrix interactions, specifically fiber two-way debonding and pull-out, matrix micro-spalling, and Cook-Gordon effects were included. This revised model was compared with experimental measurement of fiber-bridging behavior and the validity of the model was confirmed. It is expected that this model will greatly improve ECC design technology in terms of steady-state crack width control, key for structural long-term durability, and in terms of composite tensile properties important for structural safety at ultimate limit state.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Steady‐State and Multiple Cracking of Short Random Fiber Composites
Li, V. C., & Leung, C. K. Y. (1992) · Journal of Engineering Mechanics · doi:10.1061/(asce)0733-9399(1992)118:11(2246 · Cited by 1,441
Self-citation(2002) · ACI Materials Journal · doi:10.14359/12325 · Cited by 761
Micromechanics of crack bridging in fibre-reinforced concrete
Li, V. C., Stang, H., & Krenchel, H. (1993) · Materials and Structures · doi:10.1007/bf02472808 · Cited by 388
Self-citationEngineered Cementitious Composites (ECC) - Tailored Composites Through Micromechanical Modeling
Li, V. C. (1998) · Deep Blue (University of Michigan) · Cited by 235
Self-citationOn the shear behavior of engineered cementitious composites
Li, V. C., Mishra, D. K., Naaman, A. E., Wight, J. K., LaFave, J. M., Wu, H., & Inada, Y. (1994) · Advanced Cement Based Materials · doi:10.1016/1065-7355(94)90045-0 · Cited by 195
Self-citationStructure and properties of poly(vinyl alcohol)-modified mortar and concrete
Kim, J. H., Robertson, R. E., & Naaman, A. E. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(98)00246-4 · Cited by 145
Cited by
Huang, B.-T., Wu, J.-Q., Yu, J., Dai, J.-G., Leung, C. K. Y., & Li, V. C. (2021) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106292 · Cited by 364
Self-citationHuang, B.-T., Zhu, J.-X., Weng, K.-F., Li, V. C., & Dai, J.-G. (2022) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2022.104464 · Cited by 329
Self-citationYu, J., Yao, J., Lin, X., Li, H., Lam, J. Y. K., Leung, C. K. Y., Sham, I. M. L., & Shih, K. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.02.013 · Cited by 324
Zhang, Z., Yang, F., Liu, J.-C., & Wang, S. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106200 · Cited by 305
Self-citationYu, K.-Q., Zhu, W.-J., Ding, Y., Lu, Z.-D., Yu, J.-T., & Xiao, J.-Z. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.105813 · Cited by 295
Guo, P., Meng, W., Xu, M., Li, V. C., & Bao, Y. (2021) · Materials · doi:10.3390/ma14123143 · Cited by 114
Self-citation
Metadata
- Authors
- Yang, E.-H., Wang, S., Yang, Y., & Li, V. C.
- Venue
- Journal of Advanced Concrete Technology
- Publisher
- Japan Concrete Institute
- Published
- 2008
- Volume
- 6
- Issue
- 1
- Pages
- 181-193
- ISSN
- 1346-8014 (ISSN-L)
- 1347-3913
- OpenAlex
- W2017287146
- Cited by
- 535
- References
- 6
- FWCI
- 18.39
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.