Scale formation mechanisms of martensitic steels in high CO2/H2O-containing gases simulating oxyfuel environments
The DOI matches its Crossref record; 33 of the 34 references it cites were found in a registry or an index.
Abstract
In oxyfuel power plants, metallic components will be exposed to service environments containing high amounts of CO2 and water vapour. Therefore, the oxidation behaviour of a number of martensitic 9–12%Cr steels in a model gas mixture containing 70% CO2–30% H2O was studied in the temperature range 550–700°C. The results were compared with the behaviour in air, Ar–CO2 and Ar–H2O. It was found that in the CO2- and/or H2O-rich gases, the mentioned steels tended to form iron-rich oxide scales with significantly higher growth rates than the Cr-rich surface scales formed during air exposure. The iron-rich scales were formed as a result of a decreased flux of chromium in the bulk alloy toward the surface because of enhanced internal oxidation of chromium in the H2O-containing gases and carbide formation in the CO2-rich gases. Additionally, the presence of water vapour in the exposure atmosphere led to buckling of the outer haematite layer, apparently as a result of compressive oxide growth stresses. The Fe-base oxide scales formed in CO2(–H2O)-rich gases appeared to be permeable to CO2 molecules resulting in substantial carburization of the steel.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Introduction to the High Temperature Oxidation of Metals
Birks, N., Meier, G. H., & Pettit, F. S. (2006) · doi:10.1017/cbo9781139163903 · Cited by 2,189
Self-citationOxy-fuel combustion technology for coal-fired power generation
Buhre, B. J. P., Elliott, L. K., Sheng, C. D., Gupta, R. P., & Wall, T. F. (2005) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2005.07.001 · Cited by 1,542
Enhanced oxidation of the 9%Cr steel P91 in water vapour containing environments
Ehlers, J., Young, D. J., Smaardijk, E. J., Tyagi, A. K., Penkalla, H. J., Singheiser, L., & Quadakkers, W. J. (2006) · Corrosion Science · doi:10.1016/j.corsci.2006.02.002 · Cited by 325 · cited 1×
“At this temperature a wide internal oxidation zone was present, formed partly as result of oxidation of chromium-rich carbides which are mainly present at the martensite laths in this martensite steel with high creep strength [5].”
BackgroundSelf-citationThe Effect of Water Vapor on Selective Oxidation of Fe–Cr Alloys
Essuman, E., Meier, G. H., Zurek, J., Hänsel, M., & Quadakkers, W. J. (2008) · Oxidation of Metals · doi:10.1007/s11085-007-9090-x · Cited by 271
Self-citationRahmel, A., & Tobolski, J. (1965) · Corrosion Science · doi:10.1016/s0010-938x(65)90500-7 · Cited by 248
Moisture assisted crack growth in ceramics
Wiederhorn, S. M. (1968) · International Journal of Fracture · doi:10.1007/bf00188945 · Cited by 238 · cited 2×
“[38] for three 9% Cr steels P91, P92 and E911 at 600 C were similar or slightly higher than those found in the present study.”
BackgroundResultCorrosion of metals and alloys in mixed gas environments at elevated temperatures
Giggins, C. S., & Pettit, F. S. (1980) · Oxidation of Metals · doi:10.1007/bf00603609 · Cited by 226 · cited 3×
“Previous investigations have shown that Cr steels oxidized in high CO2-containing gas mixtures are prone to carburization if poorly-protective iron-base oxide scales are formed [15,16].”
BackgroundAsteman, H., Svensson, J.-E., & Johansson, L.-G. (2002) · Oxidation of Metals · doi:10.1023/a:1014877600235 · Cited by 218
Zurek, J., Wessel, E., Niewolak, L., Schmitz, F., Kern, T.-U., Singheiser, L., & Quadakkers, W. J. (2004) · Corrosion Science · doi:10.1016/j.corsci.2004.01.010 · Cited by 183
Self-citationEssuman, E., Meier, G. H., Żurek, J., Hänsel, M., Singheiser, L., & Quadakkers, W. J. (2007) · Scripta Materialia · doi:10.1016/j.scriptamat.2007.06.058 · Cited by 172
Self-citationInternational Workshop on High-Temperature Corrosion
Douglass, D. L., Kofstad, P., Rahmel, P., & Wood, G. C. (1996) · Oxidation of Metals · doi:10.1007/bf01046850 · Cited by 141
A model for mild steel oxidation in CO2
Gibbs, G. B. (1973) · Oxidation of Metals · doi:10.1007/bf00610578 · Cited by 123
High-temperature corrosion of Cr2O3-forming alloys in CO-CO2-N2 atmospheres
Zheng, X., & Young, D. J. (1994) · Oxidation of Metals · doi:10.1007/bf01052021 · Cited by 119
The Kinetic Behaviour of Metals in Water Vapour at High Temperatures: Can General Rules Be Proposed?
Galerie, A., Wouters, Y., & Caillet, M. (2001) · Materials Science Forum · doi:10.4028/www.scientific.net/msf.369-372.231 · Cited by 114 · cited 1×
“[22] and [24]), the inward transport of oxygen in the surface scales considered here occurs to a large extent by transport of H2O andyor CO2 molecules rather than ionic species [14].”
BackgroundEnnis, P. J., & Quadakkers, W. J. (2006) · International Journal of Pressure Vessels and Piping · doi:10.1016/j.ijpvp.2006.09.008 · Cited by 85 · cited 1×
“The formation of less protective, Fe-rich oxides on 9 – 12% Cr steels in water-vapour rich gases has been described by many authors [14,21,22].”
BackgroundSelf-citationAbuluwefa, H., Guthrie, R. I. L., & Ajersch, F. (1997) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-997-0255-7 · Cited by 85
Steam oxidation of ferritic steels – laboratory test kinetic data
Quadakkers, W. J., Ennis, P. J., Zurek, J., & Michalík, M. (2005) · Materials at High Temperatures · doi:10.1179/mht.2005.006 · Cited by 83 · cited 2×
“With increase of the exposure temperature above 600 C, chromium became gradually more and more enriched in the inner region of the scale (Figure 8) and the internal oxidation zone formed at lower temperatures vanished, presumably due to the faster chromium diffusion in the alloy toward the oxide layer [6].”
BackgroundResultSelf-citationMechanisms of steam oxidation in high strength martensitic steels
Ennis, P. J., & Quadakkers, W. J. (2006) · International Journal of Pressure Vessels and Piping · doi:10.1016/j.ijpvp.2006.09.007 · Cited by 77 · cited 2×
“The formation of less protective, Fe-rich oxides on 9 – 12% Cr steels in water-vapour rich gases has been described by many authors [14,21,22].”
BackgroundSelf-citationAufkohlung von Chrom‐Nickel‐Eisen‐Stählen in der Kohlenstoffpackung
Grabke, H. J., Gravenhorst, U., & Steinkusch, W. (1976) · Materials and Corrosion · doi:10.1002/maco.19760270502 · Cited by 74 · cited 1×
“As the oxygen partial pressure at the scaleymetal interface is close to the dissociation pressure of Cr2O3 (approximately 4610 39 bar at 550 C), the carbon activity from the presence of CO2 at this interface may reach values much higher than needed to form chromium-rich carbides [29].”
BackgroundCorrosion of iron-, nickel-, and cobalt-base alloys in atmospheres containing carbon and oxygen
Meier, G. H., Coons, W. C., & Perkins, R. A. (1982) · Oxidation of Metals · doi:10.1007/bf00738385 · Cited by 71 · cited 3×
“Previous investigations have shown that Cr steels oxidized in high CO2-containing gas mixtures are prone to carburization if poorly-protective iron-base oxide scales are formed [15,16].”
BackgroundSelf-citationOxidation of mild and low-alloy steels in CO2 based atmospheres
Antill, J. E., Peakall, K. A., & Warburton, J. B. (1968) · Corrosion Science · doi:10.1016/s0010-938x(68)80103-9 · Cited by 59
Pirón-Abellán, J., Olszewski, T., Meier, G. H., Singheiser, L., & Quadakkers, W. J. (2010) · International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde) · doi:10.3139/146.110271 · Cited by 59
Self-citationSchütze, M., Renusch, D. P., & Schorr, M. (2004) · Corrosion Engineering Science and Technology The International Journal of Corrosion Processes and Corrosion Control · doi:10.1179/147842204225016921 · Cited by 59
Reactions of Fe-Cr and Ni-Cr alloys in CO/CO2 gases at 850 and 950 °C
Colwell, J. A., & Rapp, R. A. (1986) · Metallurgical Transactions A · doi:10.1007/bf02661273 · Cited by 55
Rahmel, A., & Tobolski, J. (1965) · Materials and Corrosion · doi:10.1002/maco.19650160806 · Cited by 50
Rahmel, A. (1965) · Materials and Corrosion · doi:10.1002/maco.19650161002 · Cited by 38
Spallation models and their relevance to steam-grown oxides
Evans, H. E. (2005) · Materials at High Temperatures · doi:10.1179/mht.2005.018 · Cited by 38 · cited 1×
“If compressive stresses develop in the oxide during the oxidation process [36,37], Scale formation in gases simulating oxyfuel environments: J.”
BackgroundGas phase analysis of CO interactions with solid surfaces at high temperatures
Anghel, C., Hörnlund, E., Hultquist, G., & Limbäck, M. (2004) · Applied Surface Science · doi:10.1016/j.apsusc.2004.04.001 · Cited by 33 · cited 2×
“[31] proposed that the tendency of adsorption of H2O at oxidized chromium surfaces is larger than that of N 2 , CO ðgÞ and CO 2 .”
BackgroundOn the oxidation of iron in CO2+CO gas mixtures: I. Scale morphology and reaction kinetics
Bredesen, R., & Kofstad, P. (1990) · Oxidation of Metals · doi:10.1007/bf00664422 · Cited by 31
Grabke, H. J. (1973) · Annals of the New York Academy of Sciences · doi:10.1111/j.1749-6632.1973.tb51063.x · Cited by 30 · cited 1×
“Preferential adsorption of water vapour on oxide surfaces in mixed gas environments was also reported by other researchers [32,33].”
ResultCarburization resistance of nickel-base, heat-resisting alloys
Becker, P., & Young, D. J. (2007) · Oxidation of Metals · doi:10.1007/s11085-007-9058-x · Cited by 28 · cited 1×
“A study of Fe – Cr and Ni – Cr alloys exposed in CO2 – CO atmospheres [17] demonstrated that carburisation occurs to only a limited extent, or not at all, when protective Cr2O3-based scales are formed.”
BackgroundZurek, J., Hierro, L. N., Pirón-Abellán, J., Niewolak, L., Singheiser, L., & Quadakkers, W. J. (2004) · Materials science forum · doi:10.4028/www.scientific.net/msf.461-464.791 · Cited by 21 · cited 1×
“In fact, the oxidation rates of 9 – 12% Cr steels at this temperature were similar to that of the low alloy steel 13CrMo44, in agreement with earlier findings in studies on steam oxidation [34].”
ResultSelf-citationPikkarainen, T., Tourunen, A., & Hämäläinen, J. J. (2007) · Energy Materials · doi:10.1179/174892407x266644 · Cited by 10
Research works printed but not linked: 7
- Jordal, K., Anheden, M., Yan, J. and Stromberg, L. (2004)Oxyfuel combustion for coal-fired power generation with CO2 capture—opportunities and challenges. Proc. 7th Int. Conf. on Greenhouse Gas Control Technologies (GHGT-7), Vancouver, Canada, September 5-9, 201–209.
- Ehlers R.J., 2001, The Institute of Materials, London, ISSN 1354-5116
- Pirón Abelian J., Inter I Mater. Res
- Galerie A., 2001, Mater. Sci. For, 231, 369
- 10.1016/j.corsci.2004.01.010 · DOI
- Armitt J., 1978, The spalling of steam-grown oxide from superheater and reheater tube steels
- Thiele M., 1997, VGB Kraftwerks-technik, 77, 135
Cited by
Oxy-fuel combustion of solid fuels
Toftegaard, M. B., Brix, J., Jensen, P. A., Glarborg, P., & Jensen, A. D. (2010) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2010.02.001 · Cited by 1,146
“[132] studied the oxidation of martensitic steels (Cr-containing alloys) in different CO2 and H2O-containing atmospheres at temperatures between 550 C and 700 C in a laboratory setup.”
BackgroundOxy-fuel coal combustion—A review of the current state-of-the-art
Scheffknecht, G., Al-Makhadmeh, L., Schnell, U., & Maier, J. (2011) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2011.05.020 · Cited by 568
Meier, G. H., Jung, K., Mu, N., Yanar, N. M., Pettit, F. S., Pirón Abellán, J., Olszewski, T., Nieto Hierro, L., Quadakkers, W. J., & Holcomb, G. R. (2010) · Oxidation of Metals · doi:10.1007/s11085-010-9215-5 · Cited by 204
Self-citationCarburisation of ferritic Fe–Cr alloys by low carbon activity gases
Gheno, T., Monceau, D., Zhang, J., & Young, D. J. (2011) · Corrosion Science · doi:10.1016/j.corsci.2011.05.013 · Cited by 169
Penetration of protective chromia scales by carbon
Young, D. J., Nguyen, T. D., Felfer, P. J., Zhang, J., & Cairney, J. M. (2014) · Scripta Materialia · doi:10.1016/j.scriptamat.2014.01.009 · Cited by 166
Metadata
- Authors
- Pirón Abellán, J., Olszewski, T., Penkalla, H. J., Meier, G. H., Singheiser, L., & Quadakkers, W. J.
- Affiliations
- Forschungszentrum Jülich (DE)
- University of Pittsburgh (US)
- Venue
- Materials at High Temperatures
- Publisher
- Informa UK Limited
- Published
- 2009-03
- Volume
- 26
- Issue
- 1
- Pages
- 63-72
- ISSN
- 0960-3409 (ISSN-L)
- 1878-6413
- OpenAlex
- W2060973134
- Cited by
- 100
- References
- 34
- Citations by year
- 2026: 1 · 2025: 2 · 2024: 3 · 2023: 3 · 2022: 3 · 2021: 5 · 2020: 7 · 2019: 9 · 2018: 8 · 2017: 11 · 2016: 6 · 2015: 7 · 2014: 8 · 2013: 12 · 2012: 3
- FWCI
- 9.71
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Materials at High Temperatures (publishedVersion)
- Funders
- Bundesministerium für Wirtschaft und Technologie
- Topics
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › High-Temperature Coating Behaviors
- Physical Sciences › Engineering › Mechanical Engineering › High Temperature Alloys and Creep
- Physical Sciences › Materials Science › Materials Chemistry › Nuclear Materials and Properties
- Keywords
- oxide scale formation, carbide formation, CO2 permeation, carburizing, high-temperature oxidation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.