CoChat

Polyfluorinated organic micropollutants removal from water by ion exchange and adsorption

Open access
L. Conte, Luigi Falletti, Alessandro Zaggia, Marco Milan · 2015 · Chemical engineering transactions
Cited by 36

The DOI matches its OpenAlex record.

Abstract

Polyfluorinated organic micropollutants have been recently found in ground water in some industrialized areas of Veneto Region (north-east Italy).Very recent studies evidenced their presence also in River Lambro near Milan (Castiglioni et al, 2015).These compounds can be removed by adsorption on activated carbon with high efficiency, but frequent regeneration is requested especially because of polyfluorobutylic acid (PFBA) and polyfluorobutyl sulfonate (PFBS) that saturate activated carbon much more quickly than heavier molecules as polyfluoro-octanoic acid (PFOA) and polyfluoroctyl sulfonate (PFOS).In this research work an alternative solution based on ion exchange resins and/or polystyirenic adsorbents was tested both in laboratory with batch tests and on pilot-scale with a continuously fed plant.Experimental work is still in progress and is focused on five different materials supplied by Purolite ® Italia and called respectively A600E, PAD500, PAD428, A520E and MN102.Laboratory batch experiments were (and are) performed in order to study both sorption kinetics and spent resin regeneration; four materials have been tested until now: A600E, PAD500, A520E and MN102.Sorption isotherms showed a progressively decreasing adsorption capacity following the order PFOS>PFOA>PFBS> PFBA indicating a dependence of sorption phenomena both on the length of the perfluorinated tail and the pKa of the polyfluorinated acid.Further, batch experiments showed that for A600E the best regenerating solution was a 2 % NH4Cl and 1 % NaCl aqueous solution.Pilot-scale experiments were (and are) conducted in cooperation with the water service company Centro Veneto Servizi of Monselice (PD, Italy) nearby a drinking water treatment plant.The pilot plant was and is made of four parallel columns filled with different materials, each one with a volume of 350 mL and fed with 35 mL/min (2.1 L/h ) microfiltered water; so residence time is 10 min and surface hydraulic load is 3.0 m 3 /m 2 h.Four materials have been tested until now: A600E, PAD500, PAD428 and MN102.Results of first 800 h working (that correspond to a total treated water volume which is ca.4,500 times the volume of material in each column) were excellent for PFOA and PFOS removal, but a rapid decrease in PFBA and PFBS removal efficiency was encountered with PAD500 and PAD428.Further experiments are scheduled to test A520E on pilot-scale.Moreover, it would be interesting to test more hydrophobic resins which may display an increased affinity for super hydrophobic PFAS anions reducing competitive action of anions such as nitrates and sulfates.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

OpenAlex · 10.3303/cet1543377

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

See all 36

Metadata

Authors
Conte, L., Falletti, L., Zaggia, A., & Milan, M.
Venue
Chemical engineering transactions
Publisher
AIDIC-Italian Association of Chemical Engineering
Published
2015-08-20
Volume
43
Pages
2257-2262
ISSN
1974-9791 (ISSN-L)
OpenAlex
W2735012273
Cited by
36
References
0
FWCI
0.71
Type
journal article
Language
en
Open access
gold

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Polyfluorinated organic micropollutants removal from water by ion exchange and adsorption. https://app.cochat.ai/papers/10.3303/cet1543377
The paper
Conte, L., Falletti, L., Zaggia, A., & Milan, M. (2015). Polyfluorinated organic micropollutants removal from water by ion exchange and adsorption. Chemical engineering transactions. https://doi.org/10.3303/cet1543377

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.