A review of technologies for direct lithium extraction from low Li+ concentration aqueous solutions
Open accessThe DOI matches its Crossref record; 234 of the 235 references it cites were found in a registry or an index; 18 of the 242 sources its claims cite were checked for support.
Abstract
Under the Paris Agreement, established by the United Nations Framework Convention on Climate Change, many countries have agreed to transition their energy sources and technologies to reduce greenhouse gas emissions to levels concordant with the 1.5°C warming goal. Lithium (Li) is critical to this transition due to its use in nuclear fusion as well as in rechargeable lithium-ion batteries used for energy storage for electric vehicles and renewable energy harvesting systems. As a result, the global demand for Li is expected to reach 5.11 Mt by 2050. At this consumption rate, the Li reserves on land are expected to be depleted by 2080. In addition to spodumene and lepidolite ores, Li is present in seawater, and salt-lake brines as dissolved Li + ions. Li recovery from aqueous solutions such as these are a potential solution to limited terrestrial reserves. The present work reviews the advantages and challenges of a variety of technologies for Li recovery from aqueous solutions, including precipitants, solvent extractants, Li-ion sieves, Li-ion-imprinted membranes, battery-based electrochemical systems, and electro-membrane-based electrochemical systems. The techno-economic feasibility and key performance parameters of each technology, such as the Li + capacity, selectivity, separation efficiency, recovery, regeneration, cyclical stability, thermal stability, environmental durability, product quality, extraction time, and energy consumption are highlighted when available. Excluding precipitation and solvent extraction, these technologies demonstrate a high potential for sustainable Li + extraction from low Li + concentration aqueous solutions or seawater. However, further research and development will be required to scale these technologies from benchtop experiments to industrial applications. The development of optimized materials and synthesis methods that improve the Li + selectivity, separation efficiency, chemical stability, lifetime, and Li + recovery should be prioritized. Additionally, techno-economic and life cycle analyses are needed for a more critical evaluation of these extraction technologies for large-scale Li production. Such assessments will further elucidate the climate impact, energy demand, capital costs, operational costs, productivity, potential return on investment, and other key feasibility factors. It is anticipated that this review will provide a solid foundation for future research commercialization efforts to sustainably meet the growing demand for Li as the world transitions to clean energy.
Overview
CoChat Summary
## TL;DR
This review surveys direct lithium extraction (DLE) technologies for low Li\+ concentration aqueous solutions such as seawater and salt-lake brines, comparing their reported performance and practical constraints. It concludes that electrochemical systems, lithium-ion sieves, and lithium-ion-imprinted membranes are the most promising, while traditional precipitation and many solvent extraction routes face major feasibility limits.
## Key findings
- Traditional brine extraction is described as economically infeasible for solutions below 30 ppm Li\+ and especially challenging when Mg\+\+/Li\+ > 10; evaporation-based recovery can take 12–24 months.
- In the aluminate precipitation method, Heidari and Momeni (2017) reported 76.4% Li recovery from Urmia Lake water with 0.055 ppm Li\+ and 71% from 0.038 ppm Li\+ at pH 7.5.
- For lithium-ion sieves, the review reports adsorption capacities up to 63 mg/g for Li\1.33Mn\1.67O4 from salt-lake brine and up to 59.1 mg/g for H4Ti5O12 nanofibers from simulated brine; H2TiO3 reached 32.6 mg/g in Salar de Uyuni brine.
- In ion-imprinted membranes, Lu et al. (2018) reported selectivity coefficients of 1.85 for Li\+/Na\+ and 2.07 for Li\+/K\+, with rebinding capacity at 90.3% after 5 cycles and 88.1% after 10 cycles; Yu et al. (2020) reported 51 mg/g rebinding capacity for a PDMS-PDA membrane.
- Electrochemical systems showed high performance in several studies: for example, SED achieved 90.5% recovery in one listed case, while BMED is described as having an average Li\+ recovery range of 60%–98% and the lowest average SEC range of 3–19 kWh/kmol among ED processes.
## Methods
- Narrative review of technologies for extracting Li\+ from low Li\+ concentration aqueous solutions, especially salt-lake brines and seawater.
- Synthesizes prior studies across multiple technology classes: precipitation/co-precipitation, solvent extraction, lithium-ion sieves, lithium-ion-imprinted membranes, and electrochemical systems.
- Compares technologies using reported metrics when available, including Li\+ capacity, selectivity, separation efficiency, recovery, regeneration, cyclical stability, thermal stability, environmental durability, product quality, extraction time, pH, and specific energy consumption.
## Limitations
- The paper itself states that many of the reviewed technologies have only been demonstrated at bench scale, and that further research and development are required to scale them to industrial applications.
- The text repeatedly notes gaps in the literature, including the need for techno-economic and life-cycle analyses and more testing under realistic seawater or brine compositions; this is an explicit limitation stated in the paper.
- Evident from the text: because this is a review, it does not present a new experimental dataset of its own; instead it aggregates prior studies with heterogeneous conditions and outcomes.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
17 Valid · 8 Not valid · 157 Not checked · 123 Own results and interpretations
At least one cited source doesn’t support this claim or points to a different paper, and none confirmed it — see the verdicts below.
In the paper
“Additionally, the dissolution of Ti after multiple regenerations was marginal (2.53%).”
What the sources say
- Disputedcites Dai et al., 2021 sourceExperimental — accuracy not yet measured
The Abstract gives 2.53% Ti dissolution for the Al-doped adsorbent, but states that the dissolution rate after five cycles was 1.7%. The Results and discussion section (“Cycle performance,” Fig. 9) likewise reports 1.7% in the fifth cycle. The claim assigns the 2.53% figure to multiple regenerations, contrary to the reported cycle result. (LLM, conf=0.90)
Checked by a reasoning model — may be wrong.
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Disputed
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“There is a threat of Li2CO3 and sodium carbonate leaching into the environment and contaminating the soil, air, and freshwater supply of surrounding communities (Agusdinata et al., 2018).”
What the sources say
- Partly supportedcites Agusdinata et al., 2018 sourceExperimental — accuracy not yet measured
The Results section (page unavailable) says lithium may be released from evaporation ponds and affect nearby communities. It also says sodium carbonate is used in processing and that failed pond liners may release other chemicals and pollute water. It does not identify Li2CO3 or sodium carbonate as leaching contaminants, or specify contamination of soil, air, and freshwater by those compounds. (LLM, conf=0.88)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“The Li + concentration of naturally occurring salt lake brines is too low for cost-effective extraction without a pre-enrichment process (Vikström et al., 2013; Flexer et al., 2018).”
What the sources say
- Not checked — no full text of the sourcecites Vikström et al., 2013 source
- Partly supportedcites Flexer et al., 2018 sourceExperimental — accuracy not yet measured
Section 2.2 (p. 3) says lithium is a minor component of native brine and describes the current process concentrating brine to about 6000 ppm before recovery; it also calls solar evaporation cost-effective. The Conclusions (p. 14) limit that process to brines of certain compositions. The paper supports pre-concentration as part of the current economical process, but does not establish that extraction from naturally occurring salt-lake brines cannot be cost-effective without it. (LLM, conf=0.84)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“The aluminum Al-LDH (Li:Al ratio 1:3) sorbent selectively precipitated LiCl from geothermal brine with an initial Li + concentration of 360 ppm.”
What the sources say
- Partly supportedcites Paranthaman et al. (2017) sourceExperimental — accuracy not yet measured
The Sorbent synthesis section describes a Li:Al = 1:3 LDH, and Bench scale column extraction reports selective LiCl recovery from simulated geothermal brine, with lithium concentration reaching 360 mg/L at breakthrough. But the column setup specifies that the sorbent used had a Li:Al ratio of 1:1.25, not 1:3. The extraction section describes LiCl intercalating into the sorbent, not precipitating. (LLM, conf=0.90)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“Additionally, the load-washelution cycle does not produce secondary waste, an important consideration for environmental contamination and land use.”
What the sources say
- Supportedcites Paranthaman et al. (2017) source
The Additional information passage explicitly describes the LDH sorbent’s load-wash-elution behavior as occurring “without consumption of reagent chemicals nor secondary waste.” The Bench scale column extraction section likewise says the chloride-swing process avoids reagents that would create secondary-waste issues. (LLM, conf=0.94)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
151 more claims · 2 with their cited sources checked
Create a free account to see all 305 claims and to verify the 22 references still open.
- It may state two separate claims as one. 119
- Probably not a substantial claim. 52
- The quote only partly states this claim. 2
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“However, the adsorption process has the drawback of performance degradation in ion-sieve materials over time, resulting in reduced efficiency and increased operational costs due to frequent replacements [35].”
From Electrochemical Direct Lithium Extraction: A Review of Electrodialysis and Capacitive Deionization Technologies (2025) · cites this paper as [35]
Experimental — accuracy not yet measured
Citations
Cites
Items 201–235 of 235
Li, E., Kang, J., Ye, P., Zhang, W., Cheng, F., & Yin, C. (2019) · Journal of Materials Chemistry B · doi:10.1039/c8tb02906g · Cited by 31
Maheswari, P., Prasannadevi, D., & Mohan, D. R. (2012) · High Performance Polymers · doi:10.1177/0954008312459865 · Cited by 30
Zhao, B., Guo, M., Qian, Z., Li, J., Wu, Z., & Liu, Z. (2020) · Dalton Transactions · doi:10.1039/d0dt02960b · Cited by 30
Hamilton, A. D. (1984) · Elsevier eBooks · doi:10.1016/b978-008096519-2.00127-2 · Cited by 29
Liquid-Liquid Extraction and Chromatography Process Routes for the Purification of Lithium
Schmidt, A., Mestmäcker, F., Brückner, L., Elwert, T., & Strube, J. (2019) · Materials science forum · doi:10.4028/www.scientific.net/msf.959.79 · Cited by 27
Ultra-thin graphene oxide intermediate layer for bipolar membranes using atomizing spray assembly
Wang, H., Ding, F., Jin, G., Li, C., & Meng, H. (2017) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2017.01.041 · Cited by 26 · cited 2×
“The BM’s high cost and thermal instability have also contributed to the limited use of BMED for aqueous mineral recovery.”
BackgroundXu, N., Li, S., Guo, M., Qian, Z., Li, W., & Liu, Z. (2019) · ChemistrySelect · doi:10.1002/slct.201901764 · Cited by 26 · cited 1×
“The resulting sieve extracts Li via two adsorption mechanisms: physisorption driven by electrostatic interaction and chemical adsorption via ion exchange (Xu et al., 2019).”
BackgroundPauwels, H., Brach, M., & Fouillac, C. (1995) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/0927-7757(95)03185-g · Cited by 24 · cited 1×
“This reduction in Li recovery is attributed to brine impurities, such as boron, and variable environmental conditions (Pauwels et al., 1995).”
BackgroundOlea, F., Durán, G., Díaz, G., Villarroel, E., Araya‐López, C., Cabezas, R., Merlet, G., Romero, J., & Quijada‐Maldonado, E. (2022) · Minerals · doi:10.3390/min12020190 · Cited by 21
Ding, T., Wu, Q., Nie, Z., Zheng, M., Wang, Y., & Yang, D. (2022) · Polymer Testing · doi:10.1016/j.polymertesting.2022.107647 · Cited by 20
Preparation and characterization of high-stability lithium ion-sieves with aluminosilicate framework
Hu, H., Guo, J., Liu, M., Li, Y., Wu, B., Xiong, L., Chen, S., Tian, B., & Zhuang, L. (2022) · Hydrometallurgy · doi:10.1016/j.hydromet.2022.105929 · Cited by 20
Molten salt synthesis of LiGd0·01Mn1·99O4 using chloride–carbonate melt
Helan, M. N., Berchmans, L. J., Kumari, V. S. S., RaviSankar, R., & Shanmugam, V. M. (2011) · Materials Research Innovations · doi:10.1179/143307511x12998222918958 · Cited by 19 · cited 1×
“To combat this dissolution phenomenon, many authors have experimented with replacing the Mn with: divalent cobalt (Co), nickel (Ni), and magnesium (Mg); trivalent chromium (Cr), aluminum (Al, and iron (Fe); and, other rare-earth ions (Malyovanyi et al., 2003; Ein-Eli et al., 2005; Eftekhari et al., 2006; Wu et al., 20…”
BackgroundPatil, A. B., Pathak, P. N., Shinde, V. S., Alyapyshev, M. Y., Babain, V. A., & Mohapatra, P. K. (2015) · Journal of Radioanalytical and Nuclear Chemistry · doi:10.1007/s10967-015-4028-2 · Cited by 19 · cited 1×
“They have many advantageous solvent properties, including high thermal stability, selectivity, and separation efficiency, but marginal volatility (Mori et al., 2015; Patil et al., 2015; Rama et al., 2015).”
BackgroundFeatures of solvent extraction of lanthanides and actinides
FUKS, L., & MAJDAN, M. (2000) · Mineral Processing and Extractive Metallurgy Review · doi:10.1080/08827500008914164 · Cited by 19
Electrochemical properties of LiMn2O4 cathode material doped with an actinide
Eftekhari, A., Moghaddam, A. B., & Solati‐Hashjin, M. (2006) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2005.10.088 · Cited by 19 · cited 1×
“To combat this dissolution phenomenon, many authors have experimented with replacing the Mn with: divalent cobalt (Co), nickel (Ni), and magnesium (Mg); trivalent chromium (Cr), aluminum (Al, and iron (Fe); and, other rare-earth ions (Malyovanyi et al., 2003; Ein-Eli et al., 2005; Eftekhari et al., 2006; Wu et al., 20…”
BackgroundIon-imprinted antifouling nanocomposite membrane for separation of lithium ion
Sun, D., Zhou, T., Lu, Y., Yan, Y., Liu, C., & Che, G. (2022) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-022-1176-2 · Cited by 19 · cited 1×
“Additionally, these membranes can be modified with interlayers or imprinted with nanomaterials that prevent membrane fouling, a major challenge for all membrane extraction technologies (He et al., 2022; Sun et al., 2022).”
BackgroundMalliga, P., Bela, R. B., & Shanmugapriya, N. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-817951-2.00005-5 · Cited by 16
Synthesis and electrochemical behavior of Fe-doped overstoichiometric LiMn 2 O 4 -based spinels
Malyovanyi, S. M., Andriiko, A. A., & Mon'ko, A. P. (2003) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-003-0414-8 · Cited by 13 · cited 1×
“To combat this dissolution phenomenon, many authors have experimented with replacing the Mn with: divalent cobalt (Co), nickel (Ni), and magnesium (Mg); trivalent chromium (Cr), aluminum (Al, and iron (Fe); and, other rare-earth ions (Malyovanyi et al., 2003; Ein-Eli et al., 2005; Eftekhari et al., 2006; Wu et al., 20…”
BackgroundRama, R., Rout, A., Venkatesan, K. A., Antony, M. P., & Vasudeva Rao, P. R. (2015) · Separation Science and Technology · doi:10.1080/01496395.2015.1050109 · Cited by 12 · cited 1×
“They have many advantageous solvent properties, including high thermal stability, selectivity, and separation efficiency, but marginal volatility (Mori et al., 2015; Patil et al., 2015; Rama et al., 2015).”
BackgroundStructural analysis of imperfect Li2TiO3 crystals
Watanabe, A., Matsunaga, T., Abulikemu, A., Shimoda, K., Yamamoto, K., Uchiyama, T., & Uchimoto, Y. (2020) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.153037 · Cited by 11 · cited 1×
“, O/Li-Ti/O/Li/ O) that conform to the C2/c space group symmetry (Watanabe et al., 2020).”
BackgroundClean water characterization and treatment objectives
Moran, S. (2018) · An Applied Guide to Water and Effluent Treatment Plant Design · doi:10.1016/b978-0-12-811309-7.00006-0 · Cited by 10
Ion exchange properties and lithium isotopes selectivity of H0.36La0.55TiO3, H4Ti5O12 and H2Ti3O7
Gu, L., Sun, X.-L., Zhou, W., Ren, D.-H., Qiu, D., Gu, Z., & Li, Z. (2015) · Journal of Radioanalytical and Nuclear Chemistry · doi:10.1007/s10967-015-4239-6 · Cited by 9
(CHIA-YUNG) CHEN, J., & WU, Z. (2000) · Mineral Processing and Extractive Metallurgy Review · doi:10.1080/08827500008914165 · Cited by 9 · cited 1×
“However, the best separation and extraction performance has been achieved by a mixture of acidic and solvating extractants (Chen and Wu, 2000).”
BackgroundSeparating technique for magnesium and lithium from high Mg/Li ratio salt lake brine
Xu, H., Liang, X., He, X., Xi-chang, S., & Yang, X. (2009) · Journal of Central South University(Science and Technology) · Cited by 8
Separating technique for magnesium and lithium from high Mg/Li ratio salt lake brine
Xu, H., Liang, X., He, X., et al. (2009) · Journal of Central South University · Cited by 7
Jin (2018) · doi:10.1088/1755-1315/108/2/022011 · Cited by 6
Studies on the Interaction Mechanism between Lithium Chloride and Amorphous Al(OH)3
Yang, H. J., Li, B., Chai, X. L., & Li, W. (2013) · Advanced materials research · doi:10.4028/www.scientific.net/amr.634-638.126 · Cited by 5 · cited 1×
“aqueous solutions in experiments dating back to 1960 (Goodenough, 1960; Goodenough and Stenger, 1961; Kaplan, 1963; Pelly, 1978; Epstein et al., 1981; Isupov et al., 1999; Hamzaoui et al., 2007; Hamzaoui et al., 2008; Yang et al., 2013; Li et al., 2015; Heidari and Momeni, 2017; Liu et al., 2018).”
BackgroundZymon, W., & Kurbiel, J. (1986) · Studies in Environmental Science · doi:10.1016/s0166-1116(08)70951-8 · Cited by 4
Introduction to Reverse Osmosis Desalination - A SunCam online continuing education course
Voutchkov, N. (2010) · doi:10.13140/rg.2.2.13908.60801 · Cited by 2
تعیین فراوانی لیتیم در آبهای سواحل جنوبی دریای خزر و مصب رودخانه ها
پورآقابرار, م., طالشی, م. ش. ز., & چائیچی, م. ج. (2018) · مجله علوم و فنون دریایی · doi:10.22113/jmst.2018.109755.2088 · Cited by 1
Electrically Switched Cesium Ion Exchange
Sukamto, J. H., Lilga, M., & Orth, R. (1998) · doi:10.2172/1118 · Cited by 1
Barbero (2014) · doi:10.1016/j · Cited by 1
Lithium Recovery From Shale Gas Produced Water Using H2TiO3
Jang, Y., & Chung, E. (2016) · Journal of the Korean Society of Mineral and Energy Resources Engineers · doi:10.12972/ksmer.2016.53.5.482 · Cited by 1
Molten salt synthesis of LiMn2O4 using chloride–carbonate melt
Helan, M., Berchmans, L. J., Jose, T. P., et al. (2010) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2010.06.063
(2016) · doi:10.4324/9781315638058-18
Research works printed but not linked: 7
- Azevedo, 2018, Lithium and cobalt-a tale of two commodities, 1
- Draper, 1976, The geochemistry of Lake Frome, a playa lake in South Australia, BMR J. Aust. Geol. Geophys., 1, 83
- Ellestad, 1950, Method of extracting lithium values from spodumene ores
- 2022, Global EV Outlook 2022 Securing supplies for an electric future, 221
- Li, 2006, Hydrochemical characteristics and origin analysis fo the undergrond brines in west quaidam basin, J. Salt Lake Res., 14, 26
- 2022, Mineral commodity summary - lithium carbonate
- 2017, Lithium. U.S. Geological Survey professional paper 1802-K, 34
Cited by
Direct lithium extraction: A new paradigm for lithium production and resource utilization
Farahbakhsh, J., Arshadi, F., Mofidi, Z., Mohseni-Dargah, M., Kök, C., Assefi, M., Soozanipour, A., Zargar, M., Asadnia, M., Boroumand, Y., et al. (2024) · Desalination · doi:10.1016/j.desal.2023.117249 · Cited by 260
Krishnan, R., & Gopan, G. (2024) · Cleaner Engineering and Technology · doi:10.1016/j.clet.2024.100749 · Cited by 115
Foo, Z. H., Thomas, J. B., Heath, S. M., Garcia, J. A., & Lienhard, J. H. (2023) · Environmental Science & Technology · doi:10.1021/acs.est.3c04472 · Cited by 112
Electrochemically Mediated Lithium Extraction for Energy and Environmental Sustainability
Zeng, Y., Li, W., Wan, Z., Qin, S., Huang, Q., Cai, W., Wang, Q., Yao, M., & Zhang, Y. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202400416 · Cited by 88
Recovery of Lithium from Oilfield Brines—Current Achievements and Future Perspectives: A Mini Review
Knapik, E., Rotko, G., & Marszałek, M. (2023) · Energies · doi:10.3390/en16186628 · Cited by 78
Metadata
- Authors
- Murphy, O., & Haji, M. N.
- Affiliations
- Cornell University (US)
- Corresponding author
- Murphy, Olivia
- Venue
- Frontiers in Chemical Engineering
- Publisher
- Frontiers Media SA
- Published
- 2022-11-30
- Volume
- 4
- ISSN
- 2673-2718 (ISSN-L)
- OpenAlex
- W4310992964
- Cited by
- 157
- References
- 228
- Citations by year
- 2026: 75 · 2025: 46 · 2024: 29 · 2023: 7
- FWCI
- 7.73
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Frontiers in Chemical Engineering (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Alfred P. Sloan Foundation (g-2019-11435)
- National GEM Consortium
- Topics
- Physical Sciences › Materials Science › Metals and Alloys › Extraction and Separation Processes
- Physical Sciences › Chemical Engineering › Filtration and Separation › Membrane-based Ion Separation Techniques
- Physical Sciences › Chemistry › Electrochemistry › Molten salt chemistry and electrochemical processes
- Keywords
- lithium recovery, salt lake brine, lithium precipitation, solvent extraction, lithium ion sieve, electrochemical lithium extraction, techno-economic feasibility, lithium demand, battery materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.