A review of technologies for direct lithium extraction from low Li+ concentration aqueous solutions
Open accessThe DOI matches its Crossref record; 234 of the 235 references it cites were found in a registry or an index; 18 of the 242 sources its claims cite were checked for support.
Abstract
Under the Paris Agreement, established by the United Nations Framework Convention on Climate Change, many countries have agreed to transition their energy sources and technologies to reduce greenhouse gas emissions to levels concordant with the 1.5°C warming goal. Lithium (Li) is critical to this transition due to its use in nuclear fusion as well as in rechargeable lithium-ion batteries used for energy storage for electric vehicles and renewable energy harvesting systems. As a result, the global demand for Li is expected to reach 5.11 Mt by 2050. At this consumption rate, the Li reserves on land are expected to be depleted by 2080. In addition to spodumene and lepidolite ores, Li is present in seawater, and salt-lake brines as dissolved Li + ions. Li recovery from aqueous solutions such as these are a potential solution to limited terrestrial reserves. The present work reviews the advantages and challenges of a variety of technologies for Li recovery from aqueous solutions, including precipitants, solvent extractants, Li-ion sieves, Li-ion-imprinted membranes, battery-based electrochemical systems, and electro-membrane-based electrochemical systems. The techno-economic feasibility and key performance parameters of each technology, such as the Li + capacity, selectivity, separation efficiency, recovery, regeneration, cyclical stability, thermal stability, environmental durability, product quality, extraction time, and energy consumption are highlighted when available. Excluding precipitation and solvent extraction, these technologies demonstrate a high potential for sustainable Li + extraction from low Li + concentration aqueous solutions or seawater. However, further research and development will be required to scale these technologies from benchtop experiments to industrial applications. The development of optimized materials and synthesis methods that improve the Li + selectivity, separation efficiency, chemical stability, lifetime, and Li + recovery should be prioritized. Additionally, techno-economic and life cycle analyses are needed for a more critical evaluation of these extraction technologies for large-scale Li production. Such assessments will further elucidate the climate impact, energy demand, capital costs, operational costs, productivity, potential return on investment, and other key feasibility factors. It is anticipated that this review will provide a solid foundation for future research commercialization efforts to sustainably meet the growing demand for Li as the world transitions to clean energy.
Overview
CoChat Summary
## TL;DR
This review surveys direct lithium extraction (DLE) technologies for low Li\+ concentration aqueous solutions such as seawater and salt-lake brines, comparing their reported performance and practical constraints. It concludes that electrochemical systems, lithium-ion sieves, and lithium-ion-imprinted membranes are the most promising, while traditional precipitation and many solvent extraction routes face major feasibility limits.
## Key findings
- Traditional brine extraction is described as economically infeasible for solutions below 30 ppm Li\+ and especially challenging when Mg\+\+/Li\+ > 10; evaporation-based recovery can take 12–24 months.
- In the aluminate precipitation method, Heidari and Momeni (2017) reported 76.4% Li recovery from Urmia Lake water with 0.055 ppm Li\+ and 71% from 0.038 ppm Li\+ at pH 7.5.
- For lithium-ion sieves, the review reports adsorption capacities up to 63 mg/g for Li\1.33Mn\1.67O4 from salt-lake brine and up to 59.1 mg/g for H4Ti5O12 nanofibers from simulated brine; H2TiO3 reached 32.6 mg/g in Salar de Uyuni brine.
- In ion-imprinted membranes, Lu et al. (2018) reported selectivity coefficients of 1.85 for Li\+/Na\+ and 2.07 for Li\+/K\+, with rebinding capacity at 90.3% after 5 cycles and 88.1% after 10 cycles; Yu et al. (2020) reported 51 mg/g rebinding capacity for a PDMS-PDA membrane.
- Electrochemical systems showed high performance in several studies: for example, SED achieved 90.5% recovery in one listed case, while BMED is described as having an average Li\+ recovery range of 60%–98% and the lowest average SEC range of 3–19 kWh/kmol among ED processes.
## Methods
- Narrative review of technologies for extracting Li\+ from low Li\+ concentration aqueous solutions, especially salt-lake brines and seawater.
- Synthesizes prior studies across multiple technology classes: precipitation/co-precipitation, solvent extraction, lithium-ion sieves, lithium-ion-imprinted membranes, and electrochemical systems.
- Compares technologies using reported metrics when available, including Li\+ capacity, selectivity, separation efficiency, recovery, regeneration, cyclical stability, thermal stability, environmental durability, product quality, extraction time, pH, and specific energy consumption.
## Limitations
- The paper itself states that many of the reviewed technologies have only been demonstrated at bench scale, and that further research and development are required to scale them to industrial applications.
- The text repeatedly notes gaps in the literature, including the need for techno-economic and life-cycle analyses and more testing under realistic seawater or brine compositions; this is an explicit limitation stated in the paper.
- Evident from the text: because this is a review, it does not present a new experimental dataset of its own; instead it aggregates prior studies with heterogeneous conditions and outcomes.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
17 Valid · 8 Not valid · 157 Not checked · 123 Own results and interpretations
At least one cited source doesn’t support this claim or points to a different paper, and none confirmed it — see the verdicts below.
In the paper
“Additionally, the dissolution of Ti after multiple regenerations was marginal (2.53%).”
What the sources say
- Disputedcites Dai et al., 2021 matched to “Al-doped H 2 TiO 3 ion sieve with enhanced Li + adsorption performance” (2021) sourceExperimental — accuracy not yet measured
The Abstract gives 2.53% Ti dissolution for the Al-doped adsorbent, but states that the dissolution rate after five cycles was 1.7%. The Results and discussion section (“Cycle performance,” Fig. 9) likewise reports 1.7% in the fifth cycle. The claim assigns the 2.53% figure to multiple regenerations, contrary to the reported cycle result. (LLM, conf=0.90)
Checked by a reasoning model — may be wrong.
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Disputed
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“There is a threat of Li2CO3 and sodium carbonate leaching into the environment and contaminating the soil, air, and freshwater supply of surrounding communities (Agusdinata et al., 2018).”
What the sources say
- Partly supportedcites Agusdinata et al., 2018 matched to “Socio-Environmental Impacts of Lithium Mineral Extraction: Towards a Research Agenda” (2018) sourceExperimental — accuracy not yet measured
The Results section (page unavailable) says lithium may be released from evaporation ponds and affect nearby communities. It also says sodium carbonate is used in processing and that failed pond liners may release other chemicals and pollute water. It does not identify Li2CO3 or sodium carbonate as leaching contaminants, or specify contamination of soil, air, and freshwater by those compounds. (LLM, conf=0.88)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“The Li + concentration of naturally occurring salt lake brines is too low for cost-effective extraction without a pre-enrichment process (Vikström et al., 2013; Flexer et al., 2018).”
What the sources say
- Not checked — no full text of the sourcecites Vikström et al., 2013 matched to “Lithium availability and future production outlooks” (2013) source
- Partly supportedcites Flexer et al., 2018 matched to “Lithium recovery from brines: A vital raw material for green energies with a potential environmental impact in its mining and processing” (2018) sourceExperimental — accuracy not yet measured
Section 2.2 (p. 3) says lithium is a minor component of native brine and describes the current process concentrating brine to about 6000 ppm before recovery; it also calls solar evaporation cost-effective. The Conclusions (p. 14) limit that process to brines of certain compositions. The paper supports pre-concentration as part of the current economical process, but does not establish that extraction from naturally occurring salt-lake brines cannot be cost-effective without it. (LLM, conf=0.84)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“The aluminum Al-LDH (Li:Al ratio 1:3) sorbent selectively precipitated LiCl from geothermal brine with an initial Li + concentration of 360 ppm.”
What the sources say
- Partly supportedcites Paranthaman et al. (2017) matched to “Recovery of Lithium from Geothermal Brine with Lithium-Aluminum Layered Double Hydroxide Chloride Sorbents” (2017) sourceExperimental — accuracy not yet measured
The Sorbent synthesis section describes a Li:Al = 1:3 LDH, and Bench scale column extraction reports selective LiCl recovery from simulated geothermal brine, with lithium concentration reaching 360 mg/L at breakthrough. But the column setup specifies that the sorbent used had a Li:Al ratio of 1:1.25, not 1:3. The extraction section describes LiCl intercalating into the sorbent, not precipitating. (LLM, conf=0.90)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“Additionally, the load-washelution cycle does not produce secondary waste, an important consideration for environmental contamination and land use.”
What the sources say
- Supportedcites Paranthaman et al. (2017) matched to “Recovery of Lithium from Geothermal Brine with Lithium-Aluminum Layered Double Hydroxide Chloride Sorbents” (2017) source
The Additional information passage explicitly describes the LDH sorbent’s load-wash-elution behavior as occurring “without consumption of reagent chemicals nor secondary waste.” The Bench scale column extraction section likewise says the chloride-swing process avoids reagents that would create secondary-waste issues. (LLM, conf=0.94)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
151 more claims · 2 with their cited sources checked
Create a free account to see all 305 claims and to verify the 22 references still open.
- It may state two separate claims as one. 119
- Probably not a substantial claim. 52
- The quote only partly states this claim. 2
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“However, the adsorption process has the drawback of performance degradation in ion-sieve materials over time, resulting in reduced efficiency and increased operational costs due to frequent replacements [35].”
From Electrochemical Direct Lithium Extraction: A Review of Electrodialysis and Capacitive Deionization Technologies (2025) · cites this paper as [35]
Experimental — accuracy not yet measured
Citations
Cites
Where do batteries end and supercapacitors begin?
Simon, P., Gogotsi, Y., & Dunn, B. (2014) · Science · doi:10.1126/science.1249625 · Cited by 5,634
Influence of chloride, water, and organic solvents on the physical properties of ionic liquids
Seddon, K. R., Stark, A., & Torres, M.-J. (2000) · Pure and Applied Chemistry · doi:10.1351/pac200072122275 · Cited by 2,293 · cited 1×
“Perhaps the most attractive feature of ILs for ED Li recovery is that they can be customized with pre-selected characteristics such as high thermal stability, moisture stability, and ion selectivity, by careful selection of the cation and anion (Seddon et al., 2000; Seddon et al., 2002; Deetlefs et al., 2006; Zavahir…”
BackgroundZero‐Strain Insertion Material of Li [ Li1 / 3Ti5 / 3 ] O 4 for Rechargeable Lithium Cells
Ohzuku, T., Ueda, A., & Yamamoto, N. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2048592 · Cited by 1,940
A critical review on solvent extraction of rare earths from aqueous solutions
Xie, F., Zhang, T. A., Dreisinger, D., & Doyle, F. (2014) · Minerals Engineering · doi:10.1016/j.mineng.2013.10.021 · Cited by 1,444 · cited 1×
“Conversely, the Li stripping or elution process is triggered by increasing the acidity of the aqueous stripping solution (Xie et al., 2014).”
BackgroundMechanism and theory in Organic chemistry
Shorter, J. (1977) · Biochemical Education · doi:10.1016/0307-4412(77)90040-1 · Cited by 1,434
Global lithium resources: relative importance of pegmatite, brine and other deposits
Kesler, S. E., Gruber, P. W., Medina, P. A., Keoleian, G. A., Everson, M. P., & Wallington, T. J. (2012) · Ore Geology Reviews · doi:10.1016/j.oregeorev.2012.05.006 · Cited by 1,140 · cited 1×
“However, the pegmatite formations spodumene is contained in are challenging to mine given their hardness and occurrence in difficult-to-reach belt deposits (Grosjean et al., 2012; Kesler et al., 2012).”
BackgroundLithium availability and future production outlooks
Vikström, H., Davidsson, S., & Höök, M. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.04.005 · Cited by 926 · cited 2×
“The Li concentration of naturally occurring salt lake brines is too low for cost-effective extraction without a pre-enrichment process (Vikström et al., 2013; Flexer et al., 2018).”
BackgroundHard and soft acids and bases—The evolution of a chemical concept
Pearson, R. G. (1990) · Coordination Chemistry Reviews · doi:10.1016/0010-8545(90)85016-l · Cited by 886 · cited 2×
“Applying these principles to Li extraction, CEs that use ether oxygens, a hard base species, as donor atoms easily bond with hard acid, alkali metal cations such as Li (Lowry and Richardson, 1987; Pearson, 1990).”
MethodGrosjean, C., Miranda, P. H., Perrin, M., & Poggi, P. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.11.023 · Cited by 847 · cited 3×
“However, the pegmatite formations spodumene is contained in are challenging to mine given their hardness and occurrence in difficult-to-reach belt deposits (Grosjean et al., 2012; Kesler et al., 2012).”
BackgroundSystematics of the spinel structure type
Hill, R. J., Craig, J. R., & Gibbs, G. V. (1979) · Physics and Chemistry of Minerals · doi:10.1007/bf00307535 · Cited by 780 · cited 1×
“The template spinel formula is (AB2O4), where the divalent cations, A, occupy eight tetrahedral voids, the trivalent ions, B, occupy 16 octahedral voids, and the oxygen anions, O, occupy the 32 face-centered cube lattice points (Hill et al., 1979).”
Background
Research works printed but not linked: 7
- Azevedo, 2018, Lithium and cobalt-a tale of two commodities, 1
- Draper, 1976, The geochemistry of Lake Frome, a playa lake in South Australia, BMR J. Aust. Geol. Geophys., 1, 83
- Ellestad, 1950, Method of extracting lithium values from spodumene ores
- 2022, Global EV Outlook 2022 Securing supplies for an electric future, 221
- Li, 2006, Hydrochemical characteristics and origin analysis fo the undergrond brines in west quaidam basin, J. Salt Lake Res., 14, 26
- 2022, Mineral commodity summary - lithium carbonate
- 2017, Lithium. U.S. Geological Survey professional paper 1802-K, 34
Cited by
Direct lithium extraction: A new paradigm for lithium production and resource utilization
Farahbakhsh, J., Arshadi, F., Mofidi, Z., Mohseni-Dargah, M., Kök, C., Assefi, M., Soozanipour, A., Zargar, M., Asadnia, M., Boroumand, Y., et al. (2024) · Desalination · doi:10.1016/j.desal.2023.117249 · Cited by 260
Krishnan, R., & Gopan, G. (2024) · Cleaner Engineering and Technology · doi:10.1016/j.clet.2024.100749 · Cited by 115
Foo, Z. H., Thomas, J. B., Heath, S. M., Garcia, J. A., & Lienhard, J. H. (2023) · Environmental Science & Technology · doi:10.1021/acs.est.3c04472 · Cited by 112
Electrochemically Mediated Lithium Extraction for Energy and Environmental Sustainability
Zeng, Y., Li, W., Wan, Z., Qin, S., Huang, Q., Cai, W., Wang, Q., Yao, M., & Zhang, Y. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202400416 · Cited by 88
Recovery of Lithium from Oilfield Brines—Current Achievements and Future Perspectives: A Mini Review
Knapik, E., Rotko, G., & Marszałek, M. (2023) · Energies · doi:10.3390/en16186628 · Cited by 78
Kölbel, T., Kölbel, T., Herrmann, L., Kaymakci, E., Ghergut, I., Poirel, A., & Schneider, J. (2023) · Hydrometallurgy · doi:10.1016/j.hydromet.2023.106131 · Cited by 76
Kalungi, P., Yao, Z., & Huang, H. (2024) · Materials · doi:10.3390/ma17174389 · Cited by 81
“Extracting lithium from oceanic reserves is still in the early stage of research and laboratory experimentation [173,174].”
BackgroundLithium resources and novel strategies for their extraction and purification
Wu, F., Shivakumar, K. R., Konhauser, K. O., & Alessi, D. S. (2025) · npj Materials Sustainability · doi:10.1038/s44296-025-00069-5 · Cited by 101
Integrated seawater hub: A nexus of sustainable water, energy, and resource generation
Sajna, M. S., Elmakki, T., Schipper, K., Ihm, S., Yoo, Y., Park, B., Park, H., Shon, H. K., & Han, D. S. (2023) · Desalination · doi:10.1016/j.desal.2023.117065 · Cited by 69
Sim, G., Pishnamazi, M., Seo, D., Kong, S. R., Lee, J., Park, Y., & Chae, S.-R. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.154640 · Cited by 54
Porous organic polymers with heterocyclic crown ethers for selective lithium-ion capture
Fritz, P. W., Ashirov, T., & Coşkun, A. (2024) · Chem · doi:10.1016/j.chempr.2024.03.014 · Cited by 45
Solid membrane-based aqueous lithium extraction and adsorption: Advances, challenges, and prospects
Yang, Y., Bi, S., Wang, F., Pan, X., Yang, T., Hu, S., Tang, S., & Jia, Q. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.161748 · Cited by 47
Park, J., Lee, J., Shim, I.-T., Kim, E., Nam, S.-H., Koo, J.-W., & Hwang, T.-M. (2025) · Resources · doi:10.3390/resources14020027 · Cited by 44
Estimates of lithium mass yields from produced water sourced from the Devonian-aged Marcellus Shale
Mackey, J. E., Bain, D. J., Lackey, G., Gardiner, J., Gulliver, D. M., & Kutchko, B. G. (2024) · Scientific Reports · doi:10.1038/s41598-024-58887-x · Cited by 43
“Further, extraction of Li from PW with high Mg/Li mass ratios (> 6), such as in SW PA, is less efficient and expensive relative to low Mg/Li extraction methods 31 .”
Production processes for LiOH – A review
Dahlkamp, J. M., Quintero, C., Videla, Á., & Rojas, R. S. (2023) · Hydrometallurgy · doi:10.1016/j.hydromet.2023.106217 · Cited by 36
Raiguel, S., Bogaert, L. V., Balcaen, T., & Binnemans, K. (2024) · Green Chemistry · doi:10.1039/d4gc04760e · Cited by 40
Oladipo, A. A., & Ahmad, M. (2025) · Water · doi:10.3390/w17162456 · Cited by 33
Mojtahedi, B., Askari, M., & Dolati, A. (2025) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.4c08352 · Cited by 27
Recent Advances and Future Prospects of Lithium Recovery from Low-Grade Lithium Resources: A Review
Gu, J., Liang, B., Luo, X., Zhang, X., Yuan, W., Xiao, B., & Tang, X. (2024) · Inorganics · doi:10.3390/inorganics13010004 · Cited by 38
“Traditional extraction methods, such as solar evaporation, are often not economically viable for these resources due to the low lithium concentration and the need to process larger volumes of brine [36].”
InfluentialCarbon footprint and water inventory of the production of lithium in the Atacama Salt Flat, Chile
Lagos, G., Cifuentes, L., Peters, D., Castro, L., & Valdés, J. M. (2024) · Environmental Challenges · doi:10.1016/j.envc.2024.100962 · Cited by 23
From technology to economy: An evaluation of engineering in direct Lithium extraction
Moshkova, M. A., Doroshenko, I. V., Filippova, I. S., Mi, X., Krivoshapkin, P. V., & Krivoshapkina, E. F. (2025) · Desalination · doi:10.1016/j.desal.2025.119332 · Cited by 31
Wang, X., Numedahl, N., & Jiang, C. (2024) · Applied Geochemistry · doi:10.1016/j.apgeochem.2024.106126 · Cited by 22
Recovery of Li from seawater using Li1.33Mn1.67O4 immobilized multi-stage column system
Shin, J., Hwang, S., Rethinasabapathy, M., Bhaskaran, G., Chung, K., Kim, B., Huh, Y. S., & Ryu, T. (2024) · Desalination · doi:10.1016/j.desal.2024.117656 · Cited by 21
Arrúa, E. C., Bedogni, G., Salomon, C. J., & Flexer, V. (2024) · Desalination · doi:10.1016/j.desal.2024.117741 · Cited by 26
Al-Ghamdi, M. A., Altmann, T., & Das, R. (2025) · Minerals · doi:10.3390/min15050512 · Cited by 30
Rajpurohit, D., Sharma, P., Bathvar, H., Syed, S., & Shrivastav, P. S. (2024) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2024.215968 · Cited by 22
Zhang, S., Gu, T., Li, Z., Yuan, J., Yang, C., Liu, Z., Zheng, Y., Meng, X., Yue, X., Liu, Q., et al. (2025) · Journal of Membrane Science · doi:10.1016/j.memsci.2025.124046 · Cited by 20
Li, B., Jiang, L., Xiao, N., Liu, S., Zhang, Z., Liu, F., & Free, M. L. (2024) · Separation and Purification Technology · doi:10.1016/j.seppur.2024.128058 · Cited by 19
Duan, S., Jiang, S., Xu, P., Li, Z., Zhang, P., Liu, Y., Matsuoka, A., Lin, Y., Shen, J., Guan, K., et al. (2025) · Advanced Science · doi:10.1002/advs.202513172 · Cited by 16
Yong, M., Tang, M., Sun, L., Yang, J., Wang, Z., Xing, C., Tian, H., Xie, L., Wang, Z., Zhang, X., et al. (2025) · Separation and Purification Technology · doi:10.1016/j.seppur.2025.134967 · Cited by 16
Park, H., Lee, S., Lee, M., Hong, G., & Hwang, G. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.168900 · Cited by 16
Gu, J., Liang, B., Luo, X., Yuan, W., Xiao, B., & Tang, X. (2025) · Molecules · doi:10.3390/molecules30102244 · Cited by 15
“To address the growing demand for raw materials and sustainability challenges, there is a need for efficient and sustainable lithium extraction processes from alternative sources [13–15].”
Zhao, R., Sun, H., Liu, L., Wei, Q., Ren, X., & Ying, Z. (2024) · Separation and Purification Technology · doi:10.1016/j.seppur.2024.129913 · Cited by 15
Building a Circular Economy for Lithium: Addressing Global Challenges
Zanoletti, A., Bresolin, B.-M., & Bontempi, E. (2024) · Global Challenges · doi:10.1002/gch2.202400250 · Cited by 15
Toprak, S., & Demir, M. M. (2024) · Chemosphere · doi:10.1016/j.chemosphere.2024.143891 · Cited by 14
Beyond the flush: a review of wastewater circular systems
Ganesapillai, M., Vinayak, A. K., Tiwari, A., Darda, A., Chindalia, K., & Chellapandi, T. (2026) · npj Clean Water · doi:10.1038/s41545-026-00557-8 · Cited by 19
Pandey, A. (2024) · International Geology Review · doi:10.1080/00206814.2024.2400693 · Cited by 15
“2020; Murphy and Haji 2022).”
Kim, H. S., Suh, Y. J., Kim, D.-W., Yoo, H., Hong, H.-J., & Park, I. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.159220 · Cited by 13
Abujayyab, M., Hasan, S. W., Lemaoui, T., AlNashef, I. M., Arafat, H. A., & BANAT, F. A. (2025) · Desalination · doi:10.1016/j.desal.2025.118782 · Cited by 12
Pan, Y., Zhan, W., & Zhang, W. (2025) · Journal of Environmental Management · doi:10.1016/j.jenvman.2025.125343 · Cited by 13
Dhanushkotti, R., Mohammed, A. K., Ranjeesh, K. C., Krishnegowda, H. M., Aldaqqa, N. M., & Shetty, D. (2025) · Advanced Science · doi:10.1002/advs.202417140 · Cited by 19
González, A., Choque, G., Grágeda, M., & Ushak, S. (2025) · Membranes · doi:10.3390/membranes15020050 · Cited by 11
“DLE processes produce lithium-enriched solutions that still carry impurities, requiring further refining [15–17].”
Failure modes, safety concerns, testing protocol, and advancement in lithium-ion battery technology
Waseem, M., Reddy, K. S., Rao, T. R., Suhaib, M., & Khan, M. A. (2025) · Future Batteries · doi:10.1016/j.fub.2025.100113 · Cited by 12
Verdugo, L., Zhang, L., Etschmann, B. E., Brugger, J., Bruckard, W. J., Menacho, J., Molina, L., & Hoadley, A. (2024) · Processes · doi:10.3390/pr12071363 · Cited by 11
Zhou, G., Yan, W., Yan, S., Gao, D., Zeng, D., Li, D., & Zeng, D. (2024) · AIChE Journal · doi:10.1002/aic.18703 · Cited by 13
Cao, J., Meng, Z., Zhang, J., Meng, Q., Meng, W., Wang, L., Wu, H., Wenzel, M., Weigand, J. J., Liu, H., et al. (2025) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5c05922 · Cited by 9
Yelatontsev, D. O., Mukhachev, A. P., & Shevchenkо, V. (2025) · Desalination · doi:10.1016/j.desal.2025.119558 · Cited by 12
Xi, H., Yang, Z., Liu, Z., Tang, Y., Yang, S., Liu, J., Iwan, M. A., Ibrahim, I. A., & Yin, H. (2026) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2026.116704 · Cited by 10
Recovering Critical Metals from Brines: Technology Landscape, Circular Economy, and Future Trends
Abedi, M., Chang, A., Hassan, H. I., Yang, A., Hickethier, M., Bushagour, A., Aghajari, M. J., Stoerzinger, K. A., Layton, A., Abbasi, B., et al. (2026) · ACS Applied Energy Materials · doi:10.1021/acsaem.5c03407 · Cited by 21
Hong, T. Z. X., Tang, K., You, L., Chen, T., Kieu, H. T., Snyder, S. A., & Zhou, K. (2024) · ACS ES&T Water · doi:10.1021/acsestwater.4c00087 · Cited by 9
Rodríguez-Córdova, N., Sarmiento-Laurel, C., Estay, H., & Behzad, M. (2025) · Energy Conversion and Management · doi:10.1016/j.enconman.2025.119873 · Cited by 7
Amoah, M., Sovacool, B. K., Mulvaney, D., Bazilian, M., Luarkie, R., & Cardenas, D. (2024) · The Extractive Industries and Society · doi:10.1016/j.exis.2024.101557 · Cited by 17
High-efficiency lithium recovery from desalination brine via Mn Al layered double hydroxide
Abujayyab, M., Hasan, S. W., Arafat, H. A., & BANAT, F. A. (2025) · Desalination · doi:10.1016/j.desal.2025.119376 · Cited by 9
Evans, B. R., Jayanthi, K., Popovs, I., Moyer, B. A., & Paranthaman, M. P. (2025) · Sustainable materials and technologies · doi:10.1016/j.susmat.2025.e01724 · Cited by 19
Dach, E., Marston, J., Abu-Obaid, S., Peng, A., & Yip, N. Y. (2026) · Joule · doi:10.1016/j.joule.2025.102265 · Cited by 8
Henderson, G., Geysen, J., D'Haese, A. K. H., Schutyser, W., Prévoteau, A., & Bonin, L. (2025) · Desalination · doi:10.1016/j.desal.2025.119311 · Cited by 6
Ferrand, M., Barrè, Y., Gossard, A., Munier-Gondiant, G., Vito, É. D., Aldoori, H., Bosia, C., & Grandjean, A. (2025) · Water Resources and Industry · doi:10.1016/j.wri.2025.100317 · Cited by 5
Kim, D., Lee, H., & Jeon, S. (2025) · Desalination · doi:10.1016/j.desal.2025.119487 · Cited by 9
Tian, G., Mao, R., Kang, N., Li, T., Ding, L., Rong, Q., Du, W., Zhang, L., & Tang, N. (2026) · Progress in Materials Science · doi:10.1016/j.pmatsci.2026.101736 · Cited by 8
Phase transitions limit lithium adsorption in titanium-based ion sieves
Chen, H. (2024) · Materials Today Physics · doi:10.1016/j.mtphys.2024.101508 · Cited by 12
Purification of Lithium Carbonate from Radioactive Contaminants Using a MnO2-Based Inorganic Sorbent
Gileva, O., Aryal, P., Choe, J. S., Kim, Y., Kim, Y. D., Lee, E., Lee, M. H., Milyutin, V. V., Shin, K. A., & Yeon, H. (2023) · Inorganics · doi:10.3390/inorganics11100410 · Cited by 4
Entropy-driven lithium capture in a hierarchical carbon-enhanced ion-sieve hydrogel
Krishnan, M. R., & Alsharaeh, E. H. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.173507 · Cited by 4
Rapid lithium extraction via solar-thermal interfacial evaporation with zero liquid discharge
Tang, L., Singh, S. C., Ma, M., & Guo, C. (2026) · Journal of Materials Chemistry A · doi:10.1039/d5ta08968a · Cited by 6
Membranes for Lithium Recovery From Conventional and Unconventional Sources
Sreedhar, N., Lee, R., Appukuttan, S. N., Sitaraman, H., DesVeaux, J. S., Grim, R. G., Paul, M., Kumar, M., & Roy, A. (2026) · ACS ES&T Engineering · doi:10.1021/acsestengg.5c00997 · Cited by 7
“47,48 − 51 However, these adsorbents have lower selectivity and adsorption capacity compared to manganese and titanium-based adsorbents and require relatively high temperatures (due to the endothermic nature of Li + adsorption on Al-based adsorbents) and Li + concentrations in the feed to be…”
Ellath, H., El-Makaty, F. M., & Mady, M. F. (2026) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2026.218024 · Cited by 5
González, A., Choque, G., Grágeda, M., & Ushak, S. (2025) · Membranes · doi:10.3390/membranes15090250 · Cited by 5
A Review on the Recovery Methods of Lithium Hydroxide from Diverse Lithium-Bearing Resources
Tran, T. T., Chen, J., & Lee, M. S. (2025) · Mineral Processing and Extractive Metallurgy Review · doi:10.1080/08827508.2025.2486959 · Cited by 6
“Although solvent extraction provides better selectivity, the employment of organic solvents usually results in higher operating costs and environmental impacts (Butt et al. 2022; Kanagasundaram et al. 2024; Murphy and Haji 2022).”
First-Principles Predictions of Lithium Adsorption in Doped Titanium Oxide Ion Sieves
Chen, H. (2025) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5c00334 · Cited by 4
Zan, J., Shan, W., Guo, L., Hui, K. N., Luo, M., & Chen, F. (2025) · Langmuir · doi:10.1021/acs.langmuir.5c03433 · Cited by 3
Sustainability Tools I – Systems Thinking
Orgill, M., Donnelly, S., & Delaney, S. (2025) · Royal Society of Chemistry eBooks · doi:10.1039/9781837676576-00093 · Cited by 4
Ion-exchange process for cost-effective lithium recovery from battery recycling wastewater
Kurniawan, K., Macholz, J., Dzwiniel, T. L., Allen, E., Lipson, A. L., & Spangenberger, J. S. (2026) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2026.110132 · Cited by 3
Electrochemical Li+ Enrichment of Mixed-Cation Brines with Antiselective Polymer Membranes
Baird, M. A., Kingsbury, R., Wang, Y., Zhu, C., Chen, G., Klivansky, L. M., Whittaker, M., & Helms, B. A. (2025) · ACS Energy Letters · doi:10.1021/acsenergylett.5c01120 · Cited by 3
Green Materials and Processes for Lithium Extraction
Ejeian, F., Boroumand, Y., Arshadi, F., Noorisafa, F., Razmjou, A., & Javid, A. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-15742-4.00048-x · Cited by 4
Fan, W., Ma, L., Pan, W., Zeng, X., Li, Z., Su, H., Zhang, P. F., & Zhao, Y. (2025) · Desalination · doi:10.1016/j.desal.2025.119260 · Cited by 6
Review: Sustainable electrochemical lithium extraction from brine and seawater
Aththanayaka, S., & Hu, Y. (2025) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.70174 · Cited by 3
Hasan, H., Eldemerdash, U. N., Murase, K., & Gepreel, M. A. H. (2026) · Metallurgical and Materials Transactions B · doi:10.1007/s11663-026-03963-y · Cited by 4
Shoemaker, D. J., Lei, X., Holmes, W. E., Yan, H., Mokhtari, M., Fortela, D. L. B., Revellame, E. D., Hernandez, R. A., Zappi, M. E., & Gang, D. D. (2026) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2026.148883 · Cited by 4
Bridging solar harvesting technologies using hydrogels towards sustainability
Pan, X., Guan, W., Lu, W., Zhang, Y., Ong, W. L., Lin, Z., Yu, G., & Ho, G. W. (2026) · Chemical Society Reviews · doi:10.1039/d6cs00055j · Cited by 4
Physical and chemical study of manganese dioxide sorbent after sorption of lithium from brines
Abdulvaliyev, R., Karshyga, Z., Yersaiynova, A., Yessengaziyev, A., Orynbayev, B., & Kvyatkovskaya, M. N. (2024) · Kompleksnoe Ispolzovanie Mineralnogo Syra = Complex Use of Mineral Resources · doi:10.31643/2025/6445.28 · Cited by 3
Yurova, P. A., Manin, A., Стенина, И. А., & Yaroslavtsev, A. B. (2025) · Journal of Macromolecular Science Part A · doi:10.1080/10601325.2025.2536029 · Cited by 4
Iqbal, M. S., & Rahim, Z. B. A. (2024) · doi:10.22541/au.171363249.93070062/v2 · Cited by 2
Wu, B. F., Li, T., & Ding, A. (2025) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2025.117499 · Cited by 2
Salafudin, S., Prasetya, A., Warmada, I. W., Tri, H., & Petrus, H. T. B. M. (2025) · Circular Economy and Sustainability · doi:10.1007/s43615-025-00650-z · Cited by 1
Vogelsang, D. F., Seftel, E. M., Tirez, K., & Michielsen, B. (2025) · Ceramics International · doi:10.1016/j.ceramint.2025.07.080 · Cited by 2
Multi-dimensional regulation of the cycling stability of lithium manganese oxides: A review
Zhao, Q., Yao, T., Liu, Y., Zheng, X., & Yang, P. (2025) · Desalination and Water Treatment · doi:10.1016/j.dwt.2025.101591 · Cited by 1
Kiemde, A. F., Nieto, C. H. D., Marin, J., Flexer, V., & Chagnes, A. (2025) · Sustainable materials and technologies · doi:10.1016/j.susmat.2025.e01749 · Cited by 7
Lithium extraction worldwide: A bibliometric analysis and systematic literature review
Teatino, M. A. C., Araujo, J. J. M., Alva-Quezada, G. M., Saona-Polo, F. G., Mamani-Quispe, J. N., Castillo-Chung, A. R., & Arango-Retamozo, S. M. (2026) · Mineral Processing and Extractive Metallurgy Transactions of the Institutions of Mining and Metallurgy · doi:10.1177/25726641261420635 · Cited by 2
Huang, X., Neil, C. W., Ahmmed, B., Mehana, M. Z., Bhattacharya, S., Nicot, J., & Elliott, B. A. (2026) · Energy Conversion and Management X · doi:10.1016/j.ecmx.2026.101671 · Cited by 6
Tiam, A., Bechara, E., Watson, M., & Poda, S. (2026) · Water · doi:10.3390/w18060739 · Cited by 4
Review of Electrochemical Methods for Battery Recycling
Modrzynski, C. (2026) · Chemie Ingenieur Technik · doi:10.1002/cite.70102 · Cited by 2
Rediscovering Sodium Ionophores as Selective Agents for Lithium Recognition and Extraction
Narodowiec, J., Kazimierczak, A., Grela, M., Ceborska, M., Matczuk, M., Morawiak, M., & Dąbrowa, K. (2026) · Angewandte Chemie International Edition · doi:10.1002/anie.3249075 · Cited by 2
Alkahder, I. K. M., Eniola, J. O., Eid, S., Halique, K., Alhseinat, E., Mayyas, A. T., Karuppasamy, K., Mittal, H., & AlFantazi, A. (2026) · Resources Conservation & Recycling Advances · doi:10.1016/j.rcradv.2026.200359 · Cited by 3
Tonnah, R. K., Boroumand, Y., Razbin, M., Vahdani, M., Razmjou, A., & Asadnia, M. (2026) · Desalination · doi:10.1016/j.desal.2026.120498 · Cited by 1
Khalid, R., Amin, H. M. A., Liu, X., Xing, R., Liu, S., & Fujishima, A. (2026) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2026.218273 · Cited by 3
Akbari, M., Nasiri, M., Arabian, D., & Sadeghi, R. (2025) · Water Conservation Science and Engineering · doi:10.1007/s41101-025-00365-0 · Cited by 1
“These methods include electrochemical recovery [3], ion exchange [7], evaporation [8], solvent extraction [9], electrocoagulation [10], chemical precipitation, and membrane filtration [11–13].”
Akarmazyan, H., Kocharyan, H. N., & Khachatryan, S. (2024) · Proceedings of National Polytechnic University of Armenia CHEMICAL AND ENVIRONMENTAL TECHNOLOGIES · doi:10.53297/18293379-2024.2-39 · Cited by 1
Iqbal, M. S., & Rahim, Z. B. A. (2024) · doi:10.22541/au.171363249.93070062/v1 · Cited by 1
Green Harvest: Enhancing Lithium Recovery with Functionalized Keratin and Other BiomaterialsPreprint
Abujayyab, M., Hasan, S. W., Arafat, H. A., & BANAT, F. A. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4811006
Lithium Extraction Worldwide: A Bibliometric Analysis and Systematic Literature ReviewPreprint
Teatino, M. A. C., Araujo, J. J. M., Alva-Quezada, G. M., & Saona-Polo, F. G. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5119207
Farai, K., Anthony, P., Tanaka, D. D., & Mufaro, S. N. (2025) · i-manager s Journal on Chemical Sciences · doi:10.26634/jchem.5.1.21800
Metadata
- Authors
- Murphy, O., & Haji, M. N.
- Affiliations
- Cornell University (US)
- Corresponding author
- Murphy, Olivia
- Venue
- Frontiers in Chemical Engineering
- Publisher
- Frontiers Media SA
- Published
- 2022-11-30
- Volume
- 4
- ISSN
- 2673-2718 (ISSN-L)
- OpenAlex
- W4310992964
- Cited by
- 157
- References
- 228
- Citations by year
- 2026: 75 · 2025: 46 · 2024: 29 · 2023: 7
- FWCI
- 7.73
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Frontiers in Chemical Engineering (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Alfred P. Sloan Foundation (g-2019-11435)
- National GEM Consortium
- Topics
- Physical Sciences › Materials Science › Metals and Alloys › Extraction and Separation Processes
- Physical Sciences › Chemical Engineering › Filtration and Separation › Membrane-based Ion Separation Techniques
- Physical Sciences › Chemistry › Electrochemistry › Molten salt chemistry and electrochemical processes
- Keywords
- lithium recovery, salt lake brine, lithium precipitation, solvent extraction, lithium ion sieve, electrochemical lithium extraction, techno-economic feasibility, lithium demand, battery materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.