The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Recent advances in high performance poly(lactide): from “green” plasticization to super-tough materials via (reactive) compounding
Open accessAbstract
Due to its origin from renewable resources, its biodegradability, and recently, its industrial implementation at low costs, poly(lactide) (PLA) is considered as one of the most promising ecological, bio-sourced and biodegradable plastic materials to potentially and increasingly replace traditional petroleum derived polymers in many commodity and engineering applications. Beside its relatively high rigidity [high tensile strength and modulus compared with many common thermoplastics such as poly(ethylene terephthalate) (PET), high impact poly(styrene) (HIPS) and poly(propylene) (PP)], PLA suffers from an inherent brittleness, which can limit its applications especially where mechanical toughness such as plastic deformation at high impact rates or elongation is required. Therefore, the curve plotting stiffness vs. impact resistance and ductility must be shifted to higher values for PLA-based materials, while being preferably fully bio-based and biodegradable upon the application. This review aims to establish a state of the art focused on the recent progresses and preferably economically viable strategies developed in the literature for significantly improve the mechanical performances of PLA. A particular attention is given to plasticization as well as to impact resistance modification of PLA in the case of (reactive) blending PLA-based systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biodegradable polymers as biomaterials
Nair, L. S., & Laurencin, C. T. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.05.017 · Cited by 4,416
Vroman, I., & Tighzert, L. (2009) · Materials · doi:10.3390/ma2020307 · Cited by 1,355
Effect of nucleation and plasticization on the crystallization of poly (lactic acid)
Li, H., & Huneault, M. A. (2007) · Polymer · doi:10.1016/j.polymer.2007.09.020 · Cited by 810
Research progress in toughening modification of poly(lactic acid)
Liu, H., & Zhang, J. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22283 · Cited by 767
Carrasco, F., Pagès, P., Gámez-Pérez, J., Santana, O. O., & Maspoch, M. L. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.11.045 · Cited by 738
Anderson, K., Schreck, K., & Hillmyer, M. (2008) · Polymer Reviews · doi:10.1080/15583720701834216 · Cited by 600
Thermal and mechanical properties of plasticized poly(L‐lactic acid)
Baiardo, M., Frisoni, G., Scandola, M., Rimelen, M., Lips, D., Ruffieux, K., & Wintermantel, E. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12549 · Cited by 568
Plasticizing polylactide—the effect of different plasticizers on the mechanical properties
Jacobsen, S., & Fritz, H. G. (1999) · Polymer Engineering & Science · doi:10.1002/pen.11517 · Cited by 540 · cited 2×
“Therefore, the toughness of plasticized PLA tends to be reduced with time (Jacobsen and Fritz, 1999).”
BackgroundStructure and mechanical properties of poly(?,?-lactic acid)/poly(ɛ-caprolactone) blends
Broz, M. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00314-4 · Cited by 388 · cited 21×
“AFM observation revealed that the diameter of the dispersed PCL domains decreased with increasing DCP content.”
BackgroundInfluentialPillin, I., Montrelay, N., & Grohens, Y. (2006) · Polymer · doi:10.1016/j.polymer.2006.04.013 · Cited by 366 · cited 2×
“Miscibility of plasticizers in a polymer matrix is evaluated by solubility parameters (δ) and magnitude of interaction parameters (χT) (Pillin et al., 2006); – Significantly lower the Tg of PLA and thus enhance tensile toughness; – Preferably bio-sourced and biodegradable; – Non-volatile; –…”
BackgroundPlasticization of Poly(l-lactide) with Poly(propylene glycol)
Kulinski, Z., Piorkowska, E., Gadzinowska, K., & Stasiak, M. (2006) · Biomacromolecules · doi:10.1021/bm060089m · Cited by 320
Ljungberg, N., & Wesslén, B. (2003) · Polymer · doi:10.1016/j.polymer.2003.09.055 · Cited by 278
Aging of poly(lactide)/poly(ethylene glycol) blends. Part 1. Poly(lactide) with low stereoregularity
Hu, Y., Rogunova, M., Topolkaraev, V., Hiltner, A., & Baer, E. (2003) · Polymer · doi:10.1016/s0032-3861(03)00614-1 · Cited by 261
Hu, Y., Hu, Y. S., Topolkaraev, V., Hiltner, A., & Baer, E. (2003) · Polymer · doi:10.1016/s0032-3861(03)00615-3 · Cited by 258
Odent, J., Leclère, P., Raquez, J.-M., & Dubois, P. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2012.12.006 · Cited by 86 · cited 3×
“More recently, some of us have elaborated ultratough PLA-based materials by synergistically adding PLA, rubber-like poly(ε-caprolactone-coD,L-lactide) copolyester and silica nanoparticles using extrusion techniques (Odent et al., 2013a).”
MethodSelf-citationLjungberg, N., Colombini, D., & Wesslén, B. (2005) · Journal of Applied Polymer Science · doi:10.1002/app.21163 · Cited by 73 · cited 2×
“…during melt processing (Labrecque et al., 1997; Ljungberg and Wesslén, 2003; Ljungberg et al., 2003; Martino et al., 2009) and have also a strong tendency to migrate toward the surface of the polymeric material (Ljungberg and Wesslén, 2003; Ljungberg et al., 2003, 2005; Martino et al., 2006).”
Background
Cited by
Nagarajan, V., Mohanty, A. K., & Misra, M. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00321 · Cited by 926
Poly(lactic acid) blends in biomedical applications
Saini, P., Arora, M., & Kumar, M. N. V. R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.014 · Cited by 549
Othman, S. H. (2014) · Agriculture and Agricultural Science Procedia · doi:10.1016/j.aaspro.2014.11.042 · Cited by 442
Polylactide (PLA) and Its Blends with Poly(butylene succinate) (PBS): A Brief Review
Su, S., Kopitzky, R., Tolga, S., & Kabasci, S. (2019) · Polymers · doi:10.3390/polym11071193 · Cited by 380
Polylactic acid synthesis, biodegradability, conversion to microplastics and toxicity: a review
Ali, W., Ali, H., Gillani, S., Zinck, P., & Souissi, S. (2023) · Environmental Chemistry Letters · doi:10.1007/s10311-023-01564-8 · Cited by 335
Metadata
- Authors
- Kfoury, G., Raquez, J.-M., Hassouna, F., Odent, J., Toniazzo, V., Ruch, D., & Dubois, P.
- Venue
- Frontiers in Chemistry
- Publisher
- Frontiers Media SA
- Published
- 2013
- Volume
- 1
- Pages
- 32-32
- ISSN
- 2296-2646 (ISSN-L)
- OpenAlex
- W2047732649
- Cited by
- 182
- References
- 16
- FWCI
- 4.19
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.