Cited by 278Advanced Battery Materials and TechnologiesAdvancements in Battery MaterialsBattery Modeling and Management

The DOI matches its Crossref record; 119 of the 119 references it cites were found in a registry or an index.

Interfaces Between Cathode and Electrolyte in Solid State Lithium Batteries: Challenges and Perspectives

Open access

Nie, Kaihui, Hong, Yanshuai, Qiu, Jiliang, Li, Qinghao, Yu, Xiqian, Li, Hong, Chen, Liquan·2018·Frontiers in Chemistry

DOI 10.3389/fchem.2018.00616PMC PMC6299818

Open this paper in CoChat — free account Open PDF

Abstract

Solid state lithium batteries are widely accepted as promising candidates for next generation of various energy storage devices with the probability to realize improved energy density and superior safety performances. However, the interface between electrode and solid electrolyte remain a key issue that hinders practical development of solid state lithium batteries. In this review, we specifically focus on the interface between solid electrolytes and prevailing cathodes. The basic principles of interface layer formation are summarized and three kinds of interface layers can be categorized. For typical solid state lithium batteries, a most common and daunting challenge is to achieve and sustain intimate solid-solid contact. Meanwhile, different specific issues occur on various types of solid electrolytes, depending on the intrinsic properties of adjacent solid components. Our discussion mostly involves following electrolytes, including solid polymer electrolyte, inorganic solid oxide and sulfide electrolytes as well as composite electrolytes. The effective strategies to overcome the interface instabilities are also summarized. In order to clarify interfacial behaviors fundamentally, advanced characterization techniques with time, and atomic-scale resolution are required to gain more insights from different perspectives. And recent progresses achieved from advanced characterization are also reviewed here. We highlight that the cooperative characterization of diverse advanced characterization techniques is necessary to gain the final clarification of interface behavior, and stress that the combination of diverse interfacial modification strategies is required to build up decent cathode-electrolyte interface for superior solid state lithium batteries.

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

Integrity signals

Registry

Crossref · 10.3389/fchem.2018.00616

Cites

119 of 119 references verified0 citation errors · 0 not checkable

Statistics

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Issues and challenges facing rechargeable lithium batteries
Tarascon, J. ‐., & Armand, M. B. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,450
Nonaqueous Liquid Electrolytes for Lithium-Based Rechargeable Batteries
Xu, K. (2004) · Chemical Reviews · doi:10.1021/cr030203g · Cited by 7,653
High-power all-solid-state batteries using sulfide superionic conductors
Kato, Y., Hori, S., Saito, T., Suzuki, K., Hirayama, M., Mitsui, A., Yonemura, M., Iba, H., & Kanno, R. (2016) · Nature Energy · doi:10.1038/nenergy.2016.30 · Cited by 3,560
Fast Lithium Ion Conduction in Garnet‐Type Li 7 La 3 Zr 2 O 12
Murugan, R., Thangadurai, V., & Weppner, W. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200701144 · Cited by 3,304
Nanocomposite polymer electrolytes for lithium batteries
Croce, F., Appetecchi, G. B., Persi, L., & Scrosati, B. (1998) · Nature · doi:10.1038/28818 · Cited by 3,206
Complexes of alkali metal ions with poly(ethylene oxide)
Fenton, D. E., Parker, J. M., & Wright, P. V. (1973) · Polymer · doi:10.1016/0032-3861(73)90146-8 · Cited by 2,698
Negating interfacial impedance in garnet-based solid-state Li metal batteries
Han, X., Gong, Y., Fu, K. K., He, X., Hitz, G. T., Dai, J., Pearse, A. J., Liu, B., Wang, H., Rubloff, G. W., et al. (2016) · Nature Materials · doi:10.1038/nmat4821 · Cited by 2,031
High ionic conductivity in lithium lanthanum titanate
Inaguma, Y., Chen, L., Itoh, M., Nakamura, T., Uchida, T., Ikuta, H., & Wakihara, M. (1993) · Solid State Communications · doi:10.1016/0038-1098(93)90841-a · Cited by 1,627
Self-citation
PEO/garnet composite electrolytes for solid-state lithium batteries: From “ceramic-in-polymer” to “polymer-in-ceramic”
Chen, L., Li, Y., Li, S.-P., Fan, L., Nan, C., & Goodenough, J. B. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.12.037 · Cited by 1,423
Self-citation
Review on gel polymer electrolytes for lithium batteries
Stephan, A. (2006) · European Polymer Journal · doi:10.1016/j.eurpolymj.2005.09.017 · Cited by 1,367

Flagged first, then by citations

Show all 119 references

Sorted by citations

High-energy long-cycling all-solid-state lithium metal batteries enabled by silver–carbon composite anodes
Lee, Y.-G., Fujiki, S., Jung, C., Suzuki, N., Yashiro, N., Omoda, R., Ko, D., Shiratsuchi, T., Sugimoto, T., Ryu, S., et al. (2020) · Nature Energy · doi:10.1038/s41560-020-0575-z · Cited by 1,752
Approaching Practically Accessible Solid-State Batteries: Stability Issues Related to Solid Electrolytes and Interfaces
Chen, R., Li, Q., Yu, X., Chen, L., & Li, H. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00268 · Cited by 1,700
Self-citation
Intermolecular Chemistry in Solid Polymer Electrolytes for High‐Energy‐Density Lithium Batteries
Zhou, Q., Ma, J., Dong, S., Li, X., & Cui, G. (2019) · Advanced Materials · doi:10.1002/adma.201902029 · Cited by 986
Lithium/Sulfide All‐Solid‐State Batteries using Sulfide Electrolytes
Wu, J., Liu, S., Han, F., Yao, X., & Wang, C. (2020) · Advanced Materials · doi:10.1002/adma.202000751 · Cited by 823
Interface Issues and Challenges in All‐Solid‐State Batteries: Lithium, Sodium, and Beyond
Lou, S., Zhang, F., Fu, C., Chen, M., Ma, Y., Yin, G., & Wang, J. (2020) · Advanced Materials · doi:10.1002/adma.202000721 · Cited by 560
Towards high-performance solid-state Li–S batteries: from fundamental understanding to engineering design
Yang, X., Luo, J. L., & Sun, X. A. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00635d · Cited by 521
Solid Garnet Batteries
Zhao, N., Khokhar, W. A., Bi, Z., Shi, C., Guo, X., Fan, L., & Nan, C. (2019) · Joule · doi:10.1016/j.joule.2019.03.019 · Cited by 498
In situ polymerization process: an essential design tool for lithium polymer batteries
Vijayakumar, V., Anothumakkool, B., Kurungot, S., Winter, M., & Nair, J. R. (2021) · Energy & Environmental Science · doi:10.1039/d0ee03527k · Cited by 374
Sulfide and Oxide Inorganic Solid Electrolytes for All-Solid-State Li Batteries: A Review
Reddy, M. V., Julien, C. M., Mauger, A., & Zaghib, K. (2020) · Nanomaterials · doi:10.3390/nano10081606 · Cited by 338
In situ polymerization of solid-state polymer electrolytes for lithium metal batteries: a review
Zou, S., Yang, Y., Wang, J., Zhou, X., Wan, X., Zhu, M., & Liu, J. (2024) · Energy & Environmental Science · doi:10.1039/d4ee00822g · Cited by 322
Anode‐Free Solid‐State Lithium Batteries: A Review
Huang, W., Zhao, C., Wu, P., Yuan, H., Feng, W., Liu, Z., Lu, Y., Sun, S., Fu, Z., Hu, J., et al. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202201044 · Cited by 279
From Lithium‐Metal toward Anode‐Free Solid‐State Batteries: Current Developments, Issues, and Challenges
Heubner, C., Maletti, S., Auer, H., Hüttl, J., Voigt, K., Lohrberg, O., Nikolowski, K., Partsch, M., & Michaelis, A. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202106608 · Cited by 288
Lithium solid-state batteries: State-of-the-art and challenges for materials, interfaces and processing
Boaretto, N., Garbayo, Í., Valiyaveettil-SobhanRaj, S., Quintela, A., Li, C., Casas‐Cabanas, M., & Aguesse, F. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.229919 · Cited by 294
Challenges of polymer electrolyte with wide electrochemical window for high energy solid‐state lithium batteries
Huo, S., Sheng, L., Xue, W., Wang, L., Xu, H., Zhang, H., & He, X. (2023) · InfoMat · doi:10.1002/inf2.12394 · Cited by 263
Challenges and development of composite solid-state electrolytes for high-performance lithium ion batteries
Lv, F., Wang, Z., Shi, L., Zhu, J., Edström, K., Mindemark, J., & Yuan, S. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.227175 · Cited by 251
Toward Practical Solid‐State Polymer Lithium Batteries by In Situ Polymerization Process: A Review
Liu, Q., Wang, L., & He, X. (2023) · Advanced Energy Materials · doi:10.1002/aenm.202300798 · Cited by 183
Solid-state lithium battery cathodes operating at low pressures
Gao, X., Liu, B., Hu, B., Ning, Z., Spencer-Jolly, D., Zhang, S., Perera, J., Bu, J., Liu, J., Doerrer, C., et al. (2022) · Joule · doi:10.1016/j.joule.2022.02.008 · Cited by 184
Unraveling the Design Principles of Battery‐Supercapacitor Hybrid Devices: From Fundamental Mechanisms to Microstructure Engineering and Challenging Perspectives
Xing, F., Bi, Z., Su, F., Liu, F., & Wu, Z. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202200594 · Cited by 178
Overcoming the Challenges of 5 V Spinel LiNi0.5Mn1.5O4 Cathodes with Solid Polymer Electrolytes
Xu, H., Zhang, H., Ma, J., Xu, G. J., Dong, T., Chen, J., & Cui, G. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b01871 · Cited by 171
Strategies to Boost Ionic Conductivity and Interface Compatibility of Inorganic - Organic Solid Composite Electrolytes
Zhu, X., Wang, K., Xu, Y., Zhang, G., Li, S., Li, C., Zhang, X., Sun, X., Ge, X., & Ma, Y. (2021) · Energy storage materials · doi:10.1016/j.ensm.2021.01.002 · Cited by 171
Review—Surface Coatings for Cathodes in Lithium Ion Batteries: From Crystal Structures to Electrochemical Performance
Kaur, G., & Gates, B. D. (2022) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ac60f3 · Cited by 171
Mitigating Interfacial Instability in Polymer Electrolyte-Based Solid-State Lithium Metal Batteries with 4 V Cathodes
Li, Z., Zhang, H.-R., Sun, X., & Yang, Y. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c01465 · Cited by 126
Enabling the thermal stability of solid electrolyte interphase in Li‐ion battery
Zu, C., Yu, H., & Li, H. (2021) · InfoMat · doi:10.1002/inf2.12190 · Cited by 156
Self-citation
Solid-state lithium batteries-from fundamental research to industrial progress
Wu, D., Chen, L., Li, H., & Wu, F. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101182 · Cited by 151
Self-citation
Stabilizing and understanding the interface between nickel-rich cathode and PEO-based electrolyte by lithium niobium oxide coating for high-performance all-solid-state batteries
Liang, J., Hwang, S., Li, S. L., Luo, J. L., Sun, Y., Zhao, Y., Sun, Q., Li, W., Li, M., Banis, M. N., et al. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.105107 · Cited by 143
Advances in inorganic, polymer and composite electrolytes: Mechanisms of Lithium-ion transport and pathways to enhanced performance
Daems, K., Yadav, P., Dermenci, K. B., Mierlo, J. V., & Berecibar, M. (2023) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2023.114136 · Cited by 140
Thio‐/LISICON and LGPS‐Type Solid Electrolytes for All‐Solid‐State Lithium‐Ion Batteries
Tao, B., Ren, C., Li, H., Liu, B., Jia, X., Dong, X., Zhang, S., & Chang, H. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202203551 · Cited by 142
Self-citation
Understanding the Cathode–Electrolyte Interphase in Lithium‐Ion Batteries
Sungjemmenla, Vineeth, S. K., Soni, C. B., Kumar, V., & Seh, Z. W. (2022) · Energy Technology · doi:10.1002/ente.202200421 · Cited by 133
An Overview on Anodes for Magnesium Batteries: Challenges towards a Promising Storage Solution for Renewables
Bella, F., Luca, S. D., Fagiolari, L., Versaci, D., Amici, J., Francia, C., & Bodoardo, S. (2021) · Nanomaterials · doi:10.3390/nano11030810 · Cited by 132
Behavior of Solid Electrolyte in Li-Polymer Battery with NMC Cathode via in-Situ Scanning Electron Microscopy
Kaboli, S., Demers, H., Paolella, A., Darwiche, A., Dontigny, M., Clément, D., Guerfi, A., Trudeau, M. L., Goodenough, J. B., & Zaghib, K. (2020) · Nano Letters · doi:10.1021/acs.nanolett.9b04452 · Cited by 129
Current status and future directions of all-solid-state batteries with lithium metal anodes, sulfide electrolytes, and layered transition metal oxide cathodes
Wu, C., Lou, J., Zhang, J., Chen, Z., Kakar, A., Emley, B. J., Ai, Q., Guo, H., Liang, Y., Lou, J., et al. (2021) · Nano Energy · doi:10.1016/j.nanoen.2021.106081 · Cited by 130
Solid‐State Lithium Batteries: Bipolar Design, Fabrication, and Electrochemistry
Jung, K., Shin, H., Park, M., & Lee, J. (2019) · ChemElectroChem · doi:10.1002/celc.201900736 · Cited by 127
An impedance model based on a transmission line circuit and a frequency dispersion Warburg component for the study of EIS in Li-ion batteries
Cruz-Manzo, S., & Greenwood, P. (2020) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2020.114305 · Cited by 125
Interface engineering for composite cathodes in sulfide-based all-solid-state lithium batteries
Li, Y., Zhang, D., Xu, X., Wang, Z., Liu, Z., Shen, J., Liu, J., & Zhu, M. H. (2020) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2020.12.017 · Cited by 124
Processing Strategies to Improve Cell-Level Energy Density of Metal Sulfide Electrolyte-Based All-Solid-State Li Metal Batteries and Beyond
Cao, D., Zhao, Y., Sun, X. H., Natan, A., Wang, Y., Xiang, P., Wang, W., & Zhu, H. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c01905 · Cited by 124
Engineering the conductive carbon/PEO interface to stabilize solid polymer electrolytes for all-solid-state high voltage LiCoO 2 batteries
Liang, J., Sun, Y., Zhao, Y., Sun, Q., Luo, J. L., Zhao, F., Lin, X., Li, X., Li, R., Zhang, L., et al. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta08607b · Cited by 122
Active material and interphase structures governing performance in sodium and potassium ion batteries
Kim, E. J., Kumar, P. R., Gossage, Z. T., Kubota, K., Hosaka, T., Tatara, R., & Komaba, S. (2022) · Chemical Science · doi:10.1039/d2sc00946c · Cited by 127
Enhancing ionic conductivity in solid electrolyte by relocating diffusion ions to under-coordination sites
Zhu, L., Wang, Y., Chen, J., Li, W., Wang, T., Wu, J., Han, S., Xia, Y., Wu, Y., Wu, M., et al. (2022) · Science Advances · doi:10.1126/sciadv.abj7698 · Cited by 125
Self-citation
Critical interface between inorganic solid-state electrolyte and sodium metal
Tang, B., Jaschin, P. W., Li, X., Bo, S., & Zhou, Z. P. (2020) · Materials Today · doi:10.1016/j.mattod.2020.08.016 · Cited by 117
Li, Na, K, Mg, Zn, Al, and Ca Anode Interface Chemistries Developed by Solid‐State Electrolytes
Shinde, S. S., Wagh, N. K., Kim, S., & Lee, J. (2023) · Advanced Science · doi:10.1002/advs.202304235 · Cited by 123
Challenges and opportunities towards silicon-based all-solid-state batteries
Zhan, X., Li, M., Li, S., Pang, X., Mao, F., Wang, H., Sun, Z., Han, X., Jiang, B., He, Y., et al. (2023) · Energy storage materials · doi:10.1016/j.ensm.2023.102875 · Cited by 117
Status and prospect of in situ and operando characterization of solid-state batteries
Dixit, M. B., Park, J., Kenesei, P., Almer, J., & Hatzell, K. B. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00638j · Cited by 114
Structure Design of Cathode Electrodes for Solid‐State Batteries: Challenges and Progress
Zhang, X., Yue, F.-S., Liang, J., Shi, J., Li, H., & Guo, Y. (2020) · Small Structures · doi:10.1002/sstr.202000042 · Cited by 114
Self-citation
Practical Application of All‐Solid‐State Lithium Batteries Based on High‐Voltage Cathodes: Challenges and Progress
Chen, X., Li, X., Luo, L., He, S., Chen, J., Liu, Y., Pan, H., Song, Y. H., & Hu, R. (2023) · Advanced Energy Materials · doi:10.1002/aenm.202301230 · Cited by 114
Perspectives for next generation lithium-ion battery cathode materials
Booth, S. G., Nedoma, A. J., Anthonisamy, N. N., Baker, P. J., Boston, R., Bronstein, H. A., Clarke, S. J., Cussen, E. J., Daramalla, V., Volder, M. F. L. D., et al. (2021) · APL Materials · doi:10.1063/5.0051092 · Cited by 104
Interfaces in all solid state Li-metal batteries: A review on instabilities, stabilization strategies, and scalability
Paul, P. P., Chen, B., Langevin, S. A., Dufek, E. J., Weker, J. N., & Ko, J. S. (2021) · Energy storage materials · doi:10.1016/j.ensm.2021.12.021 · Cited by 104
High‐Performance All‐Solid‐State Batteries Enabled by Intimate Interfacial Contact Between the Cathode and Sulfide‐Based Solid Electrolytes
Kim, J., Kim, M. J., Kim, J., Lee, J. W., Park, J., Wang, S. E., Lee, S., Kang, Y. C., Paik, U., Jung, D. S., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202211355 · Cited by 102
A Review on Engineering Design for Enhancing Interfacial Contact in Solid-State Lithium–Sulfur Batteries
Qi, B., Hong, X., Jiang, Y., Shi, J., Zhang, M., Yan, W., & Lai, C. (2024) · Nano-Micro Letters · doi:10.1007/s40820-023-01306-z · Cited by 94
Emerging Role of Non-crystalline Electrolytes in Solid-State Battery Research
Grady, Z. M., Wilkinson, C. J., Randall, C. A., & Mauro, J. C. (2020) · Frontiers in Energy Research · doi:10.3389/fenrg.2020.00218 · Cited by 100
Recent progress in the development of glass and glass-ceramic cathode/solid electrolyte materials for next-generation high capacity all-solid-state sodium-ion batteries: A review
Gandi, S., Vaddadi, V. S. C. S., Panda, S. S. S., Goona, N. K., Parne, S. R., Lakavat, M., & Bhaumik, A. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.230930 · Cited by 89
A review on design of cathode, anode and solid electrolyte for true all-solid-state lithium sulfur batteries
Bandyopadhyay, S., & Nandan, B. (2022) · Materials Today Energy · doi:10.1016/j.mtener.2022.101201 · Cited by 86
A Solid‐State Battery Cathode with a Polymer Composite Electrolyte and Low Tortuosity Microstructure by Directional Freezing and Polymerization
Huang, C., Leung, C. L. A., Leung, P., & Grant, P. S. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202002387 · Cited by 84
Anode‐Free Alkali Metal Batteries: From Laboratory to Practicability
Xu, P., Huang, F., Sun, Y., Lei, Y., Cao, X., Liang, S., & Fang, G. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202406080 · Cited by 82
Interface Engineering on Constructing Physical and Chemical Stable Solid‐State Electrolyte Toward Practical Lithium Batteries
He, H., Wang, L., Al‐Abbasi, M., Cao, C., Li, H., Xu, Z., Chen, S., Zhang, W., Li, R., Lai, Y., et al. (2024) · Energy & environment materials · doi:10.1002/eem2.12699 · Cited by 76
Self-citation
A Structure Self‐Healing Li‐Rich Cathode Achieved by Lithium Supplement of Li‐Rich LLZO Coating
Wei, Y., Cheng, J., Li, D., Li, Y., Zeng, Z., Liu, H., Zhang, H., Ji, F., Geng, X., Lu, J., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202214775 · Cited by 75
A fluorinated cation introduces new interphasial chemistries to enable high-voltage lithium metal batteries
Liu, Q., Jiang, W., Xu, J., Xu, Y., Yang, Z., Yoo, D., Pupek, K., Wang, C., Liu, C., Xu, K., et al. (2023) · Nature Communications · doi:10.1038/s41467-023-38229-7 · Cited by 76
Recent advancements in solid electrolytes integrated into all-solid-state 2D and 3D lithium-ion microbatteries
Jetybayeva, A., Uzakbaiuly, B., Mukanova, A. O., Myung, S., & Bakenov, Z. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta02652f · Cited by 74
Perspectives of ionic covalent organic frameworks for rechargeable batteries
Zou, J., Fan, K., Chen, Y., Hu, W., & Wang, C. (2022) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2022.214431 · Cited by 73
Understanding implications of cathode architecture on energy density of solid-state batteries
Dixit, M. B., Parejiya, A., Muralidharan, N., Essehli, R., Amin, R., & Belharouak, I. (2021) · Energy storage materials · doi:10.1016/j.ensm.2021.05.001 · Cited by 67
Investigation of Delamination-Induced Performance Decay at the Cathode/LLZO Interface
Barai, P., Rojas, T., Narayanan, B., Ngo, A. T., Curtiss, L. A., & Srinivasan, V. (2021) · Chemistry of Materials · doi:10.1021/acs.chemmater.0c04656 · Cited by 67
The effect of volume change and stack pressure on solid‐state battery cathodes
Liu, B., Pu, S. D., Doerrer, C., Spencer-Jolly, D., House, R. A., Melvin, D. L. R., Adamson, P., Grant, P. S., Gao, X., & Bruce, P. G. (2023) · SusMat · doi:10.1002/sus2.162 · Cited by 67
Composite cathode for all-solid-state lithium batteries: Progress and perspective
Zeng, Z., Cheng, J., Li, Y., Zhang, H., Liu, H., Liu, H., Ji, F., Sun, Q., & Ci, L. (2023) · Materials Today Physics · doi:10.1016/j.mtphys.2023.101009 · Cited by 66
In-situ preparation of gel polymer electrolyte with glass fiber membrane for lithium batteries
Wu, S., Zheng, H., Tian, R., Hei, Z., Liu, H., & Duan, H. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228627 · Cited by 65
Revolutionizing energy storage: exploring the nanoscale frontier of all-solid-state batteries
Kumar, Y. A., Roy, N., Ramachandran, T., Assiri, M. A., Rao, S. S., Moniruzzaman, M., & Joo, S. W. (2024) · Dalton Transactions · doi:10.1039/d4dt01133c · Cited by 66
In Situ/Operando Spectroscopic Characterizations Guide the Compositional and Structural Design of Lithium–Sulfur Batteries
Tian, J., Jiang, T., Wang, M., Hu, Z., Zhu, X., Zhang, L., Qian, T., & Yan, C. (2019) · Small Methods · doi:10.1002/smtd.201900467 · Cited by 63
Interface Design Considering Intrinsic Properties of Dielectric Materials to Minimize Space‐Charge Layer Effect between Oxide Cathode and Sulfide Solid Electrolyte in All‐Solid‐State Batteries
Park, B. K., Kim, H., Kim, K. S., Kim, H., Han, S. H., Yu, J., Hah, H. J., Moon, J., Cho, W., & Kim, K. J. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202201208 · Cited by 65
Li1.5La1.5MO6 (M = W6+, Te6+) as a new series of lithium-rich double perovskites for all-solid-state lithium-ion batteries
Amores, M., El‐Shinawi, H., McClelland, I., Yeandel, S. R., Baker, P. J., Smith, R. I., Playford, H. Y., Goddard, P., Cussen, S. A., & Cussen, E. J. (2020) · Nature Communications · doi:10.1038/s41467-020-19815-5 · Cited by 64
Critical role of zeolites as H 2 S scavengers in argyrodite Li 6 PS 5 Cl solid electrolytes for all-solid-state batteries
Lee, D., Park, K. H., Kim, S. Y., Jung, J. Y., Lee, W., Kim, K., Jeong, G., Yu, J., Choi, J., Park, M., et al. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta04799j · Cited by 62
Electro‐Chemo‐Mechanical Degradation in Solid‐State Batteries: A Review of Microscale and Multiphysics Modeling
Gol, A. D., Dermenci, K. B., Farkas, L., & Berecibar, M. (2024) · Advanced Energy Materials · doi:10.1002/aenm.202403255 · Cited by 63
Recent Advances in Stability Issues of Inorganic Solid Electrolytes and Composite Solid Electrolytes for All‐Solid‐State Batteries
Liu, Q., Jiang, L., Zheng, P., Sun, J., Liu, C., Chai, J., Li, X., Zheng, Y., & Liu, Z. (2022) · The Chemical Record · doi:10.1002/tcr.202200116 · Cited by 63
Lithium metal batteries with all-solid/full-liquid configurations
Xie, H., Feng, J., & Zhao, H. (2023) · Energy storage materials · doi:10.1016/j.ensm.2023.102918 · Cited by 59
Organic-inorganic multi-scale enhanced interfacial engineering of sulfide solid electrolyte in Li-S battery
Bai, Y., Zhao, Y., Li, W., Meng, L., Bai, Y., & Chen, G. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125334 · Cited by 59
Co 3 S 4 @Li 7 P 3 S 11 Hexagonal Platelets as Cathodes with Superior Interfacial Contact for All-Solid-State Lithium Batteries
Shi, J., Liu, G., Weng, W., Cai, L., Zhang, Q., Wu, J., Xu, X., & Yao, X. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c02085 · Cited by 59
Spatially Controlled Lithium Deposition on Silver‐Nanocrystals‐Decorated TiO2 Nanotube Arrays Enabling Ultrastable Lithium Metal Anode
Lu, Y., Wang, J., Chen, Y., Zheng, X., Yao, H., Mathur, S., & Hong, Z. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202009605 · Cited by 68
Managing transport properties in composite electrodes/electrolytes for all-solid-state lithium-based batteries
Falco, M., Ferrari, S., Appetecchi, G. B., & Gerbaldi, C. (2019) · Molecular Systems Design & Engineering · doi:10.1039/c9me00050j · Cited by 57
Research Progress and Perspective on Lithium/Sodium Metal Anodes for Next‐Generation Rechargeable Batteries
Patrike, A., Yadav, P., Shelke, V., & Shelke, M. V. (2022) · ChemSusChem · doi:10.1002/cssc.202200504 · Cited by 55
Interfacial processes in electrochemical energy systems
Wang, M., & Feng, Z. (2021) · Chemical Communications · doi:10.1039/d1cc01703a · Cited by 54
Electro-Chemo-Mechanical Challenges and Perspective in Lithium Metal Batteries
Naik, K. G., Vishnugopi, B. S., Datta, J., Datta, D., & Mukherjee, P. P. (2023) · Applied Mechanics Reviews · doi:10.1115/1.4057039 · Cited by 53
Tailoring Interfacial Structures to Regulate Carrier Transport in Solid‐State Batteries
Deng, Z., Chen, S., Yang, K., Song, Y., Xue, S., Yao, X., Yang, L., & Pan, F. (2024) · Advanced Materials · doi:10.1002/adma.202407923 · Cited by 54
High-Performance Solid Composite Polymer Electrolyte for all Solid-State Lithium Battery Through Facile Microstructure Regulation
Yang, J., Wang, X., Zhang, G., Ma, A., Chen, W., Shao, L., Shen, C., & Xie, K. (2019) · Frontiers in Chemistry · doi:10.3389/fchem.2019.00388 · Cited by 53
Composite Cathodes for Solid‐State Lithium Batteries: “Catholytes” the Underrated Giants
Al-Salih, H., Houache, M. S. E., Baranova, E. A., & Abu‐Lebdeh, Y. (2022) · Advanced Energy and Sustainability Research · doi:10.1002/aesr.202200032 · Cited by 52
Nanoscale Electron Transfer Variations at Electrocatalyst–Electrolyte Interfaces Resolved by in Situ Conductive Atomic Force Microscopy
Munz, M., Poon, J., Frandsen, W., Cuenya, B. R., & Kley, C. S. (2023) · Journal of the American Chemical Society · doi:10.1021/jacs.2c12617 · Cited by 54
Anomalous Thermal Decomposition Behavior of Polycrystalline LiNi0.8Mn0.1Co0.1O2 in PEO‐Based Solid Polymer Electrolyte
Yang, L., Zhang, J., Xue, W., Li, J., Chen, R., Pan, H., Yu, X., Liu, Y., Li, H., Chen, L., et al. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202200096 · Cited by 49
Self-citation
Mechanical Investigations of Composite Cathode Degradation in All-Solid-State Batteries
Farzanian, S., Mercado, J. V., Shozib, I. A., Sivadas, N., Lacivita, V., Wang, Y. E., & Tu, Q. H. (2023) · ACS Applied Energy Materials · doi:10.1021/acsaem.3c01681 · Cited by 51
Current Insight into 3D Printing in Solid‐State Lithium‐Ion Batteries: A Perspective
Ponnada, S., Gorle, D. B., Bose, R. S. C., Kiai, M. S., Devi, M., Raju, C. V., Baydoğan, N., Nanda, K. K., Marken, F., & Sharma, R. K. (2022) · Batteries & Supercaps · doi:10.1002/batt.202200223 · Cited by 50
Prospects and Strategies for Single‐Crystal NCM Materials to Solve All‐Solid‐State Battery Cathode Interface Problems
Bai, X., Xie, F., Zhang, Z., Cao, M., Wang, Q., Wang, S., Liu, C., Su, X., Lin, Z., & Cui, G. (2024) · Advanced Energy Materials · doi:10.1002/aenm.202401336 · Cited by 50
Garnet-type solid-state electrolytes and interfaces in all-solid-state lithium batteries: progress and perspective
Huang, J., Liang, F., Hou, M., Zhang, Y., Chen, K., & Xue, D. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2020.100750 · Cited by 48
Advancements in cathode materials for potassium-ion batteries: current landscape, obstacles, and prospects
Masese, T. N., & Kanyolo, G. M. (2023) · Energy Advances · doi:10.1039/d3ya00406f · Cited by 47
Safety Evaluation of All-Solid-State Batteries: An Innovative Methodology Using In Situ Synchrotron X-ray Radiography
Charbonnel, J., Darmet, N., Deilhes, C., Broche, L., Reytier, M., Thivel, P., & Vincent, R. (2022) · ACS Applied Energy Materials · doi:10.1021/acsaem.2c01514 · Cited by 43
Quasi-Solid Polymer Electrolyte with Multiple Lithium-Ion Transport Pathways by In Situ Thermal-Initiating Polymerization.
Lin, W., Zheng, X., Ma, S., Ji, K., Wang, C.-Y., & Chen, M. (2023) · ACS Applied Materials and Interfaces · doi:10.1021/acsami.2c20884 · Cited by 40
Solid‐State Electrolytes and Electrode/Electrolyte Interfaces in Rechargeable Batteries
Chai, S., He, Q., Zhou, J., Chang, Z., Pan, A., & Zhou, H. S. (2023) · ChemSusChem · doi:10.1002/cssc.202301268 · Cited by 41
Anchoring Interfacial Nickel Cations by Tunable Coordinative Structure for Highly Stabilized Nickel-Rich Layered Oxide Cathodes
Ma, C., Chen, M., Ding, Z., Wei, B., Liang, C., Zhou, L., Chen, L., Ji, X., Gao, P. D., & Wei, W. F. (2021) · Nano Energy · doi:10.1016/j.nanoen.2021.106803 · Cited by 41
Self-citation
Avoiding CO2 Improves Thermal Stability at the Interface of Li7La3Zr2O12 Electrolyte with Layered Oxide Cathodes
Kim, Y.-G., Waluyo, I., Hunt, A. H., & Yildiz, B. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202102741 · Cited by 48
Research progress on the interfaces of solid-state lithium metal batteries
Sun, Y.-Y., Li, F., & Hou, P. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta00467k · Cited by 40
Multi‐Foldable and Environmentally Stable All‐Solid‐State Supercapacitor Based on Hierarchical Nano‐Canyon Structured Ionic‐Gel Polymer Electrolyte
Lee, D., Song, Y., Song, Y., Oh, S. J., Choi, U. H., & Kim, J. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202109907 · Cited by 40
Study of failure modes in two sulphide-based solid electrolyte all-solid-state batteries via in situ SEM
Yadav, N., Folastre, N., Bolmont, M., Jamali, A., Morcrette, M., & Davoisne, C. (2022) · Journal of Materials Chemistry A · doi:10.1039/d2ta01889f · Cited by 40
Overview and perspectives of solid electrolytes for sodium batteries
Vasudevan, S., Dwivedi, S., & Balaya, P. (2022) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.14267 · Cited by 39
100th Anniversary of Macromolecular Science Viewpoint: Solid Polymer Electrolytes in Cathode Electrodes for Lithium Batteries. Current Challenges and Future Opportunities
Patel, S. N. (2021) · ACS Macro Letters · doi:10.1021/acsmacrolett.0c00724 · Cited by 40
Modern Developments for Textile-Based Supercapacitors
Newby, S., Mirihanage, W. U., & Fernando, A. (2023) · ACS Omega · doi:10.1021/acsomega.3c01176 · Cited by 38
Cutting‐Edge Developments at the Interface of Inorganic Solid‐State Electrolytes
Chen, Y. W., Qian, J., Wang, K., Li, L., Wu, F., & Chen, R. (2025) · Advanced Materials · doi:10.1002/adma.202502653 · Cited by 40

Authors: Nie, K., Hong, Y., Qiu, J., Li, Q., Yu, X., Li, H., & Chen, L.
Affiliations: Chinese Academy of Sciences (CN)
Corresponding author: Li, Qinghao
Yu, Xiqian
ORCID: Li, Qinghao
Yu, Xiqian
Li, Hong
Chen, Liquan
Venue: Frontiers in Chemistry
Publisher: Frontiers Media SA
Published: 2018-12-12
Volume: 6
Pages: 616-616
ISSN: 2296-2646 (ISSN-L)
DOI: 10.3389/fchem.2018.00616
PMC: PMC6299818
OpenAlex: W2903697882
Cited by: 278
References: 119
Citations by year: 2026: 32 · 2025: 39 · 2024: 33 · 2023: 42 · 2022: 42 · 2021: 42 · 2020: 34 · 2019: 14
FWCI: 1.25
Type: journal article
Language: en
Open access: gold
doi.org
Licence: cc-by
creativecommons.org/licenses/by/4.0/ (unspecified)
Locations: Frontiers in Chemistry (publishedVersion, cc-by)
Europe PMC (PubMed Central) (publishedVersion, cc-by)
PubMed Central (publishedVersion, cc-by)
PubMed (publishedVersion)
DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
Funders: National Natural Science Foundation of China (51822211)
eijing Municipal Science & Technology (Z171100000917021)
Topics: Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Battery Materials and Technologies
Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
Keywords: solid-state lithium batteries, cathode-electrolyte interface, solid-solid contact, solid polymer electrolytes, solid oxide electrolytes, composite electrolytes, interfacial instability

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Interfaces Between Cathode and Electrolyte in Solid State Lithium Batteries: Challenges and Perspectives

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Self-check

Citations

Cites

Cited by

Related

Metadata

Record

About these checks