Cited by 278Advanced Battery Materials and TechnologiesAdvancements in Battery MaterialsBattery Modeling and Management

The DOI matches its Crossref record; 119 of the 119 references it cites were found in a registry or an index.

Interfaces Between Cathode and Electrolyte in Solid State Lithium Batteries: Challenges and Perspectives

Open access

Nie, Kaihui, Hong, Yanshuai, Qiu, Jiliang, Li, Qinghao, Yu, Xiqian, Li, Hong, Chen, Liquan·2018·Frontiers in Chemistry

DOI 10.3389/fchem.2018.00616PMC PMC6299818

Open this paper in CoChat — free account Open PDF

Abstract

Solid state lithium batteries are widely accepted as promising candidates for next generation of various energy storage devices with the probability to realize improved energy density and superior safety performances. However, the interface between electrode and solid electrolyte remain a key issue that hinders practical development of solid state lithium batteries. In this review, we specifically focus on the interface between solid electrolytes and prevailing cathodes. The basic principles of interface layer formation are summarized and three kinds of interface layers can be categorized. For typical solid state lithium batteries, a most common and daunting challenge is to achieve and sustain intimate solid-solid contact. Meanwhile, different specific issues occur on various types of solid electrolytes, depending on the intrinsic properties of adjacent solid components. Our discussion mostly involves following electrolytes, including solid polymer electrolyte, inorganic solid oxide and sulfide electrolytes as well as composite electrolytes. The effective strategies to overcome the interface instabilities are also summarized. In order to clarify interfacial behaviors fundamentally, advanced characterization techniques with time, and atomic-scale resolution are required to gain more insights from different perspectives. And recent progresses achieved from advanced characterization are also reviewed here. We highlight that the cooperative characterization of diverse advanced characterization techniques is necessary to gain the final clarification of interface behavior, and stress that the combination of diverse interfacial modification strategies is required to build up decent cathode-electrolyte interface for superior solid state lithium batteries.

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

Integrity signals

Registry

Crossref · 10.3389/fchem.2018.00616

Cites

119 of 119 references verified0 citation errors · 0 not checkable

Statistics

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Issues and challenges facing rechargeable lithium batteries
Tarascon, J. ‐., & Armand, M. B. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,450
Nonaqueous Liquid Electrolytes for Lithium-Based Rechargeable Batteries
Xu, K. (2004) · Chemical Reviews · doi:10.1021/cr030203g · Cited by 7,653
High-power all-solid-state batteries using sulfide superionic conductors
Kato, Y., Hori, S., Saito, T., Suzuki, K., Hirayama, M., Mitsui, A., Yonemura, M., Iba, H., & Kanno, R. (2016) · Nature Energy · doi:10.1038/nenergy.2016.30 · Cited by 3,560
Fast Lithium Ion Conduction in Garnet‐Type Li 7 La 3 Zr 2 O 12
Murugan, R., Thangadurai, V., & Weppner, W. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200701144 · Cited by 3,304
Nanocomposite polymer electrolytes for lithium batteries
Croce, F., Appetecchi, G. B., Persi, L., & Scrosati, B. (1998) · Nature · doi:10.1038/28818 · Cited by 3,206
Complexes of alkali metal ions with poly(ethylene oxide)
Fenton, D. E., Parker, J. M., & Wright, P. V. (1973) · Polymer · doi:10.1016/0032-3861(73)90146-8 · Cited by 2,698
Negating interfacial impedance in garnet-based solid-state Li metal batteries
Han, X., Gong, Y., Fu, K. K., He, X., Hitz, G. T., Dai, J., Pearse, A. J., Liu, B., Wang, H., Rubloff, G. W., et al. (2016) · Nature Materials · doi:10.1038/nmat4821 · Cited by 2,031
High ionic conductivity in lithium lanthanum titanate
Inaguma, Y., Chen, L., Itoh, M., Nakamura, T., Uchida, T., Ikuta, H., & Wakihara, M. (1993) · Solid State Communications · doi:10.1016/0038-1098(93)90841-a · Cited by 1,627
Self-citation
PEO/garnet composite electrolytes for solid-state lithium batteries: From “ceramic-in-polymer” to “polymer-in-ceramic”
Chen, L., Li, Y., Li, S.-P., Fan, L., Nan, C., & Goodenough, J. B. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.12.037 · Cited by 1,423
Self-citation
Review on gel polymer electrolytes for lithium batteries
Stephan, A. (2006) · European Polymer Journal · doi:10.1016/j.eurpolymj.2005.09.017 · Cited by 1,367
Promises, Challenges, and Recent Progress of Inorganic Solid‐State Electrolytes for All‐Solid‐State Lithium Batteries
Gao, Z., Sun, H., Fu, L., Ye, F., Zhang, Y. H., Luo, W. H., & Huang, Y. (2018) · Advanced Materials · doi:10.1002/adma.201705702 · Cited by 1,315
Ionic conduction in space charge regions
Maier, J. (1995) · Progress in Solid State Chemistry · doi:10.1016/0079-6786(95)00004-e · Cited by 1,141
Thin-film lithium and lithium-ion batteries
Bates, J. B. (2000) · Solid State Ionics · doi:10.1016/s0167-2738(00)00327-1 · Cited by 1,127
Electrochemical Stability of Li 10 GeP 2 S 12 and Li 7 La 3 Zr 2 O 12 Solid Electrolytes
Han, F., Zhu, Y., He, X., Mo, Y., & Wang, C. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501590 · Cited by 1,099
Sulfide Solid Electrolyte with Favorable Mechanical Property for All-Solid-State Lithium Battery
Sakuda, A., Hayashi, A., & Tatsumisago, M. (2013) · Scientific Reports · doi:10.1038/srep02261 · Cited by 1,063
First principles study on electrochemical and chemical stability of solid electrolyte–electrode interfaces in all-solid-state Li-ion batteries
Zhu, Y., He, X., & Mo, Y. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta08574h · Cited by 1,047
Capacity Fade in Solid-State Batteries: Interphase Formation and Chemomechanical Processes in Nickel-Rich Layered Oxide Cathodes and Lithium Thiophosphate Solid Electrolytes
Koerver, R., Aygün, I., Leichtweiß, T., Dietrich, C., Zhang, W., Binder, J. O., Hartmann, P., Zeier, W. G., & Janek, J. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00931 · Cited by 1,037
High Ionic Conductivity of Composite Solid Polymer Electrolyte via In Situ Synthesis of Monodispersed SiO 2 Nanospheres in Poly(ethylene oxide)
Lin, D., Liu, W., Liu, Y., Lee, H. R., Hsu, P., Liu, K., & Cui, Y. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b04117 · Cited by 1,024
Plating a Dendrite-Free Lithium Anode with a Polymer/Ceramic/Polymer Sandwich Electrolyte
Zhou, W., Wang, S., Li, Y., Xin, S., Manthiram, A., & Goodenough, J. B. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b05341 · Cited by 1,010
Review on composite polymer electrolytes for lithium batteries
Stephan, A. M., & Nahm, K. S. (2006) · Polymer · doi:10.1016/j.polymer.2006.05.069 · Cited by 991
Conduction Characteristics of the Lithium Iodide-Aluminum Oxide Solid Electrolytes
Liang, C. (1973) · Journal of The Electrochemical Society · doi:10.1149/1.2403248 · Cited by 940
Ionic Conductivity of Solid Electrolytes Based on Lithium Titanium Phosphate
Aono, H., Sugimoto, E., Sadaoka, Y., Imanaka, N., & Adachi, G. (1990) · Journal of The Electrochemical Society · doi:10.1149/1.2086597 · Cited by 927
Polymer solid electrolytes - an overview
Armand, M. B. (1983) · Solid State Ionics · doi:10.1016/0167-2738(83)90083-8 · Cited by 905
Enhancement of the High‐Rate Capability of Solid‐State Lithium Batteries by Nanoscale Interfacial Modification
Ohta, N., Takada, K., Zhang, L., Ma, R., Osada, M., & Sasaki, T. (2006) · Advanced Materials · doi:10.1002/adma.200502604 · Cited by 900
Evolution of Strategies for Modern Rechargeable Batteries
Goodenough, J. B. (2012) · Accounts of Chemical Research · doi:10.1021/ar2002705 · Cited by 865
Direct Observation of the Interfacial Instability of the Fast Ionic Conductor Li 10 GeP 2 S 12 at the Lithium Metal Anode
Wenzel, S., Randau, S., Leichtweiß, T., Weber, D. A., Sann, J., Zeier, W. G., & Janek, J. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b00610 · Cited by 862
In situ NMR observation of the formation of metallic lithium microstructures in lithium batteries
Bhattacharyya, R., Key, B., Chen, H., Best, A. S., Hollenkamp, A. F., & Grey, C. P. (2010) · Nature Materials · doi:10.1038/nmat2764 · Cited by 822
Interfaces in Solid-State Lithium Batteries
Xu, L., Tang, S., Cheng, Y., Wang, K., Liang, J., Liu, C., Cao, Y., Wei, F., & Mai, L. (2018) · Joule · doi:10.1016/j.joule.2018.07.009 · Cited by 711
Effects of inert fillers on the mechanical and electrochemical properties of lithium salt-poly(ethylene oxide) polymer electrolytes
Weston, J. E., & Steele, B. C. H. (1982) · Solid State Ionics · doi:10.1016/0167-2738(82)90072-8 · Cited by 656
Safety‐Reinforced Poly(Propylene Carbonate)‐Based All‐Solid‐State Polymer Electrolyte for Ambient‐Temperature Solid Polymer Lithium Batteries
Zhang, J., Zhao, J., Yue, L., Wang, Q., Chai, J., Liu, Z., Zhou, X., Li, H., Guo, Y., Cui, G., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501082 · Cited by 640
Self-citation
Space–Charge Layer Effect at Interface between Oxide Cathode and Sulfide Electrolyte in All-Solid-State Lithium-Ion Battery
Haruyama, J., Sodeyama, K., Han, L., Takada, K., & Tateyama, Y. (2014) · Chemistry of Materials · doi:10.1021/cm5016959 · Cited by 617
Lithium Ion Pathway within Li 7 La 3 Zr 2 O 12 ‐Polyethylene Oxide Composite Electrolytes
Zheng, J., Tang, M., & Hu, Y. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201607539 · Cited by 612
Interphase formation on lithium solid electrolytes—An in situ approach to study interfacial reactions by photoelectron spectroscopy
Wenzel, S., Leichtweiß, T., Krüger, D., Sann, J., & Janek, J. (2015) · Solid State Ionics · doi:10.1016/j.ssi.2015.06.001 · Cited by 607
Synchrotron X-ray Analytical Techniques for Studying Materials Electrochemistry in Rechargeable Batteries
Lin, F., Liu, Y., Yu, X., Cheng, L., Singer, A., Shpyrko, O., Xin, H. L., Tamura, N., Tian, C., Weng, T., et al. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00007 · Cited by 587
Self-citation
Fluorinated electrolytes for 5 V lithium-ion battery chemistry
Zhang, Z., Hu, L., Wu, H., Weng, W., Koh, M., Redfern, P. C., Curtiss, L. A., & Amine, K. (2013) · Energy & Environmental Science · doi:10.1039/c3ee24414h · Cited by 587
Electrolyte and Interface Engineering for Solid-State Sodium Batteries
Lü, Y., Li, L., Zhang, Q., Niu, Z., & Chen, J. (2018) · Joule · doi:10.1016/j.joule.2018.07.028 · Cited by 560
In Situ Generation of Poly (Vinylene Carbonate) Based Solid Electrolyte with Interfacial Stability for LiCoO 2 Lithium Batteries
Chai, J., Liu, Z., Ma, J., Wang, J., Liu, X., Liu, H., Zhang, J., Cui, G., & Chen, L. (2016) · Advanced Science · doi:10.1002/advs.201600377 · Cited by 541
Self-citation
Physical and Chemical Properties of Nanocomposite Polymer Electrolytes
Croce, F., Curini, R., Martinelli, A., Persi, L., Ronci, F., Scrosati, B., & Caminiti, R. (1999) · The Journal of Physical Chemistry B · doi:10.1021/jp992307u · Cited by 522
Measurement of transference numbers for lithium ion electrolytes via four different methods, a comparative study
Zugmann, S., Fleischmann, M., Amereller, M., Gschwind, R. M., Wiemhöfer, H., & Gores, H. J. (2011) · Electrochimica Acta · doi:10.1016/j.electacta.2011.02.025 · Cited by 502
A Flexible Solid Composite Electrolyte with Vertically Aligned and Connected Ion-Conducting Nanoparticles for Lithium Batteries
Zhai, H., Xu, P., Ning, M., Cheng, Q., Mandal, J., & Yang, Y. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b00715 · Cited by 489
Electrochemical Nature of the Cathode Interface for a Solid-State Lithium-Ion Battery: Interface between LiCoO 2 and Garnet-Li 7 La 3 Zr 2 O 12
Park, K., Yu, B., Jung, J., Li, Y., Zhou, W., Gao, H., Son, S., & Goodenough, J. B. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b03870 · Cited by 475
Interphase Engineering Enabled All-Ceramic Lithium Battery
Han, F., Yue, J., Chen, C., Zhao, N., Fan, X., Ma, Z., Gao, T., Wang, F., Guo, X., & Wang, C. (2018) · Joule · doi:10.1016/j.joule.2018.02.007 · Cited by 469
A new solid polymer electrolyte incorporating Li10GeP2S12 into a polyethylene oxide matrix for all-solid-state lithium batteries
Zhao, Y., Wu, C. K., Peng, G., Chen, X., Yao, X., Bai, Y., Wu, F., Chen, S., & Xu, X. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.09.111 · Cited by 455
High-voltage and free-standing poly(propylene carbonate)/Li 6.75 La 3 Zr 1.75 Ta 0.25 O 12 composite solid electrolyte for wide temperature range and flexible solid lithium ion battery
Zhang, J., Zang, X. M., Wen, H., Dong, T., Chai, J., Li, Y., Chen, B., Zhao, J., Dong, S., Ma, J., et al. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta10066j · Cited by 433
Self-citation
Suppression of Lithium Dendrite Formation by Using LAGP-PEO (LiTFSI) Composite Solid Electrolyte and Lithium Metal Anode Modified by PEO (LiTFSI) in All-Solid-State Lithium Batteries
Wang, C., Yang, Y., Liu, X., Zhong, H. T., Han, X., Xu, Z., Shao, H., & Ding, F. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b00336 · Cited by 420
Interfacial Stability of Li Metal–Solid Electrolyte Elucidated via in Situ Electron Microscopy
Ma, C., Cheng, Y. Q., Yin, K., Luo, J., Sharafi, A., Sakamoto, J. S., Li, J., More, K. L., Dudney, N. J., & Chi, M. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b03223 · Cited by 402
All-solid-state lithium ion battery using garnet-type oxide and Li3BO3 solid electrolytes fabricated by screen-printing
Ohta, S., Komagata, S., Seki, J., Saeki, T., Morishita, S., & Asaoka, T. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.02.073 · Cited by 399
Characterization of the interface between LiCoO2 and Li7La3Zr2O12 in an all-solid-state rechargeable lithium battery
Kim, K., Iriyama, Y., Yamamoto, K., Kumazaki, S., Asaka, T., Tanabe, K., Fisher, C. A. J., Hirayama, T., Murugan, R., & Ogumi, Z. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.07.073 · Cited by 397
In Situ STEM-EELS Observation of Nanoscale Interfacial Phenomena in All-Solid-State Batteries
Wang, Z., Santhanagopalan, D., Zhang, W., Wang, F., Xin, H. L., He, K., Li, J., Dudney, N. J., & Meng, Y. S. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b01119 · Cited by 388
Super Soft All-Ethylene Oxide Polymer Electrolyte for Safe All-Solid Lithium Batteries
Porcarelli, L., Gerbaldi, C., Bella, F., & Nair, J. R. (2016) · Scientific Reports · doi:10.1038/srep19892 · Cited by 387
High-Energy All-Solid-State Lithium Batteries with Ultralong Cycle Life
Yao, X., Liu, D., Wang, C., Peng, L., Peng, G., Hu, Y., Li, H., Chen, L., & Xu, X. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b03448 · Cited by 360
Self-citation
Degradation Mechanisms at the Li 10 GeP 2 S 12 /LiCoO 2 Cathode Interface in an All-Solid-State Lithium-Ion Battery
Zhang, W., Richter, F. H., Culver, S. P., Leichtweiß, T., Lozano, J. G., Dietrich, C., Bruce, P. G., Zeier, W. G., & Janek, J. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b05132 · Cited by 340
Dynamic Visualization of the Electric Potential in an All‐Solid‐State Rechargeable Lithium Battery
Yamamoto, K., Iriyama, Y., Asaka, T., Hirayama, T., Fujita, H., Fisher, C. A. J., Nonaka, K., Sugita, Y., & Ogumi, Z. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.200907319 · Cited by 311
The nasicon-type titanium phosphates Ati2(PO4)3 (A=Li, Na) as electrode materials
Delmas, C., Nadiri, A., & Soubeyroux, J. L. (1988) · Solid State Ionics · doi:10.1016/s0167-2738(88)80075-4 · Cited by 288
Bulk-Type All Solid-State Batteries with 5 V Class LiNi0.5Mn1.5O4 Cathode and Li10GeP2S12 Solid Electrolyte
Oh, G., Hirayama, M., Kwon, O., Suzuki, K., & Kanno, R. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04940 · Cited by 278
Lithium Ion Pathway within Li7La3Zr2O12‐Polyethylene Oxide Composite Electrolytes
Zheng, J., Tang, M., & Hu, Y. (2016) · Angewandte Chemie · doi:10.1002/ange.201607539 · Cited by 277
Co-sinterable lithium garnet-type oxide electrolyte with cathode for all-solid-state lithium ion battery
Ohta, S., Seki, J., Yagi, Y., Kihira, Y., Tani, T., & Asaoka, T. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.04.065 · Cited by 268
About the Compatibility between High Voltage Spinel Cathode Materials and Solid Oxide Electrolytes as a Function of Temperature
Miara, L. J., Windmüller, A., Tsai, C., Richards, W. D., Ma, Q., Uhlenbruck, S., Guillon, O., & Ceder, G. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b09059 · Cited by 256
In-situ Li7La3Zr2O12/LiCoO2 interface modification for advanced all-solid-state battery
Kato, T., Hamanaka, T., Yamamoto, K., Hirayama, T., Sagane, F., Motoyama, M., & Iriyama, Y. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.02.102 · Cited by 253
Fast Solid-State Li Ion Conducting Garnet-Type Structure Metal Oxides for Energy Storage
Thangadurai, V., Pinzaru, D., Narayanan, S., & Baral, A. K. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz501828v · Cited by 250
Mitigating Interfacial Potential Drop of Cathode–Solid Electrolyte via Ionic Conductor Layer To Enhance Interface Dynamics for Solid Batteries
Liang, J., Zeng, X., Zhang, X., Wang, P., Ma, J., Yin, Y., Wu, X., Guo, Y., & Wan, L. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b03319 · Cited by 244
Ionic conductivity of quenched alkali niobate and tantalate glasses
Glass, A. M., NASSAU, K., & Negran, T. J. (1978) · Journal of Applied Physics · doi:10.1063/1.325509 · Cited by 232
Second Phase Effects on the Conductivity of Non‐Aqueous Salt Solutions: “Soggy Sand Electrolytes”
Bhattacharyya, A. J., & Maier, J. (2004) · Advanced Materials · doi:10.1002/adma.200306210 · Cited by 225
Comparative Study of TiS 2 /Li-In All-Solid-State Lithium Batteries Using Glass-Ceramic Li 3 PS 4 and Li 10 GeP 2 S 12 Solid Electrolytes
Shin, B. R., Nam, Y. J., Oh, D. Y., Kim, D. H., Kim, J. W., & Jung, Y. S. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2014.08.139 · Cited by 214
In Situ Neutron Depth Profiling of Lithium Metal–Garnet Interfaces for Solid State Batteries
Wang, C., Gong, Y., Dai, J., Zhang, L., Xie, H., Pastel, G., Liu, B., Wachsman, E. D., Wang, H., & Hu, L. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b07904 · Cited by 212
Electrochemical stability and conductivity enhancement of composite polymer electrolytes
Park, C. H. (2003) · Solid State Ionics · doi:10.1016/s0167-2738(03)00025-0 · Cited by 205
W-Doped Li7La3Zr2O12 Ceramic Electrolytes for Solid State Li-ion Batteries
Li, Y., Wang, Z., Cao, Y., Du, F., Chen, C., Cui, Z., & Guo, X. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.08.046 · Cited by 198
First In Situ Observation of the LiCoO2 Electrode/Electrolyte Interface by Total‐Reflection X‐ray Absorption Spectroscopy
Takamatsu, D., Koyama, Y., Orikasa, Y., Mori, S., Nakatsutsumi, T., Hirano, T., Tanida, H., Arai, H., Uchimoto, Y., & Ogumi, Z. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201203910 · Cited by 196
Microporous polymer electrolyte based on PVDF/PEO star polymer blends for lithium ion batteries
Deng, F., Wang, X., He, D., Hu, J., Gong, C., Ye, Y. S., Xie, X., & Xue, Z. (2015) · Journal of Membrane Science · doi:10.1016/j.memsci.2015.05.021 · Cited by 196
An advanced construction strategy of all-solid-state lithium batteries with excellent interfacial compatibility and ultralong cycle life
Zhang, Z., Zhao, Y., Chen, S., Xie, D., Yao, X., Cui, P., & Xu, X. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta04320a · Cited by 194
Ionic conductivity, lithium insertion and extraction of lanthanum lithium titanate
Chen, C. H. (2001) · Solid State Ionics · doi:10.1016/s0167-2738(01)00884-0 · Cited by 193
In Situ Atomic-Scale Observation of Electrochemical Delithiation Induced Structure Evolution of LiCoO2 Cathode in a Working All-Solid-State Battery
Gong, Y., Zhang, J., Jiang, L., Shi, J., Zhang, Q., Yang, Z., Zou, D., Wang, J., Yu, X., Xiao, R., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b13344 · Cited by 187
Self-citation
Ion transport in sodium ion conducting solid electrolytes
Fergus, J. W. (2012) · Solid State Ionics · doi:10.1016/j.ssi.2012.09.019 · Cited by 183
Achieving high capacity in bulk-type solid-state lithium ion battery based on Li 6.75 La 3 Zr 1.75 Ta 0.25 O 12 electrolyte: Interfacial resistance
Liu, T., Ren, Y., Shen, Y., Zhao, S., Lin, Y., & Nan, C. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.05.111 · Cited by 179
Surface-protected LiCoO2 with ultrathin solid oxide electrolyte film for high-voltage lithium ion batteries and lithium polymer batteries
Yang, Q., Huang, J., Li, Y., Wang, Y., Qiu, J., Zhang, J., Yu, H., Yu, X., Li, H., & Chen, L. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.03.076 · Cited by 179
Self-citation
Atomic Layer Deposition of the Solid Electrolyte Garnet Li7La3Zr2O12
Kazyak, E., Chen, K., Wood, K. N., Davis, A. L., Thompson, T., Bielinski, A. R., Sanchez, A. J., Wang, X., Wang, C., Sakamoto, J. S., et al. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00944 · Cited by 177
Addressing the Interface Issues in All-Solid-State Bulk-Type Lithium Ion Battery via an All-Composite Approach
Chen, R., Zhang, Y., Liu, T., Xu, B., Lin, Y., Nan, C., & Shen, Y. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b16304 · Cited by 176
High rate capabilities of all-solid-state lithium secondary batteries using Li4Ti5O12-coated LiNi0.8Co0.15Al0.05O2 and a sulfide-based solid electrolyte
Seino, Y., Ota, T., & Takada, K. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.03.090 · Cited by 166
Factors affecting cyclic durability of all-solid-state lithium polymer batteries using poly(ethylene oxide)-based solid polymer electrolytes
Nakayama, M., Wada, S., Kuroki, S., & Nogami, M. (2010) · Energy & Environmental Science · doi:10.1039/c0ee00266f · Cited by 153
Cation Mixing Properties toward Co Diffusion at the LiCoO 2 Cathode/Sulfide Electrolyte Interface in a Solid-State Battery
Haruyama, J., Sodeyama, K., & Tateyama, Y. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b08435 · Cited by 153
A Strategy to Make High Voltage LiCoO 2 Compatible with Polyethylene Oxide Electrolyte in All-Solid-State Lithium Ion Batteries
Ma, J., Liu, Z., Chen, B., Wang, L., Yue, L., Liu, H., Zhang, J., Liu, Z., & Cui, G. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0221714jes · Cited by 150
Fabrication of electrode–electrolyte interfaces in all-solid-state rechargeable lithium batteries by using a supercooled liquid state of the glassy electrolytes
Kitaura, H., Hayashi, A., Ohtomo, T., Hama, S., & Tatsumisago, M. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm01090a · Cited by 149
Synthesis of novel CuS with hierarchical structures and its application in lithium-ion batteries
Yan, H., Wang, Y., Gao, W., Wang, Y., Jiao, L., Yuan, H., & Liu, S. (2011) · Powder Technology · doi:10.1016/j.powtec.2011.04.028 · Cited by 136
The mechanism of lithium ion transport in polyacrylonitrile-based polymer electrolytes
Huang, B., Wang, Z., Chen, L., Xue, R., & Wang, F. (1996) · Solid State Ionics · doi:10.1016/s0167-2738(96)83030-x · Cited by 128
Self-citation
New Insight in Understanding Oxygen Reduction and Evolution in Solid-State Lithium–Oxygen Batteries Using an in Situ Environmental Scanning Electron Microscope
Zheng, H., Xiao, D., Li, X., Liu, Y., Wu, Y., Wang, J., Jiang, K., Chen, C., Gu, L., Wei, X., et al. (2014) · Nano Letters · doi:10.1021/nl500862u · Cited by 120
Self-citation
Probing the Complexities of Structural Changes in Layered Oxide Cathode Materials for Li-Ion Batteries during Fast Charge–Discharge Cycling and Heating
Hu, E., Wang, X., Yu, X., & Yang, X. (2018) · Accounts of Chemical Research · doi:10.1021/acs.accounts.7b00506 · Cited by 120
Self-citation
Structure and electrochemistry of polymer electrolytes
Bruce, P. G. (1995) · Electrochimica Acta · doi:10.1016/0013-4686(95)00144-4 · Cited by 118
Li-Ion Conduction and Stability of Perovskite Li3/8Sr7/16Hf1/4Ta3/4O3
Huang, B., Xu, B., Li, Y., Zhou, W., You, Y., Zhong, S., Wang, C., & Goodenough, J. B. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b03070 · Cited by 118
Investigation on the interface between Li10GeP2S12 electrolyte and carbon conductive agents in all-solid-state lithium battery
Yoon, K., Kim, J., Seong, W. M., Lee, M. H., & Kang, K. (2018) · Scientific Reports · doi:10.1038/s41598-018-26101-4 · Cited by 110
Characterization of Sputter-Deposited LiCoO2 Thin Film Grown on NASICON-type Electrolyte for Application in All-Solid-State Rechargeable Lithium Battery
Kim, H., Oh, Y., Kang, K. H., Kim, J. H., Kim, J., & Yoon, C. S. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b15305 · Cited by 109
In-situ preparation of poly(ethylene oxide)/Li3PS4 hybrid polymer electrolyte with good nanofiller distribution for rechargeable solid-state lithium batteries
Chen, S., Wang, J., Zhang, Z., Wu, L., Yao, L., Wei, Z., Deng, Y., Xie, D., Yao, X., & Xu, X. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.03.016 · Cited by 108
The synergistic effects of Al and Te on the structure and Li + -mobility of garnet-type solid electrolytes
Wang, D., Zhong, G., Dolotko, O., Li, Y., McDonald, M. J., Mi, J., Fu, R., & Yang, Y. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta03591g · Cited by 104
The electrical conductivity of semi-conductors involving inclusions of another phase
Wagner, C. G. (1972) · Journal of Physics and Chemistry of Solids · doi:10.1016/s0022-3697(72)80265-8 · Cited by 104
Novel Li[(CF3SO2)(n-C4F9SO2)N]-Based Polymer Electrolytes for Solid-State Lithium Batteries with Superior Electrochemical Performance
Ma, Q., Qi, X., Tong, B., Zheng, Y., Feng, W., Nie, J., Hu, Y., Li, H., Huang, X., Chen, L., et al. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b10597 · Cited by 103
Self-citation
Depth-resolved X-ray absorption spectroscopic study on nanoscale observation of the electrode–solid electrolyte interface for all solid state lithium ion batteries
Okumura, T., Nakatsutsumi, T., Ina, T., Orikasa, Y., Arai, H., Fukutsuka, T., Iriyama, Y., Uruga, T., Tanida, H., Uchimoto, Y., et al. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm04366d · Cited by 102
Li Distribution Heterogeneity in Solid Electrolyte Li 10 GeP 2 S 12 upon Electrochemical Cycling Probed by 7 Li MRI
Chien, P., Feng, X., Tang, M., Rosenberg, J. T., O’Neill, S., Zheng, J., Grant, S. C., & Hu, Y. (2018) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.8b00240 · Cited by 101
Influence of TiO2 nano-particles on charge carrier transport and cell performance of PMMA-LiClO4 based nano-composite electrolytes
Pal, P., & Ghosh, A. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.11.070 · Cited by 98
Effect of sol composition on solid electrode/solid electrolyte interface for all-solid-state lithium ion battery
Kotobuki, M., Suzuki, Y., Munakata, H., Kanamura, K., Sato, Y., Yamamoto, K., & Yoshida, T. (2010) · Electrochimica Acta · doi:10.1016/j.electacta.2010.11.008 · Cited by 84
Thin hybrid electrolyte based on garnet-type lithium-ion conductor Li7La3Zr2O12 for 12 V-class bipolar batteries
Yoshima, K., Harada, Y., & Takami, N. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.10.031 · Cited by 78
Direct observation of lithium-ion movement around an in-situ-formed-negative-electrode/solid-state-electrolyte interface during initial charge–discharge reaction
Yamamoto, K., Iriyama, Y., Asaka, T., Hirayama, T., Fujita, H., Nonaka, K., Miyahara, K., Sugita, Y., & Ogumi, Z. (2012) · Electrochemistry Communications · doi:10.1016/j.elecom.2012.04.013 · Cited by 77
A High-Rate, Long-Life, Lithium Nanocomposite Polymer Electrolyte Battery
Croce, F., Fiory, F. S., Persi, L., & Scrosati, B. (2001) · Electrochemical and Solid-State Letters · doi:10.1149/1.1380568 · Cited by 71
In Situ MRI of Operating Solid-State Lithium Metal Cells Based on Ionic Plastic Crystal Electrolytes
Romanenko, K., Jin, L., Howlett, P. C., & Forsyth, M. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b00797 · Cited by 70
Origin of Solid Electrolyte Interphase on Nanosized LiCoO[sub 2]
Liu, N., Li, H., Wang, Z., Huang, X., & Chen, L. (2006) · Electrochemical and Solid-State Letters · doi:10.1149/1.2200138 · Cited by 69
Self-citation
A surface science approach to cathode/electrolyte interfaces in Li-ion batteries: Contact properties, charge transfer and reactions
Hausbrand, R., Becker, D., & Jaegermann, W. (2014) · Progress in Solid State Chemistry · doi:10.1016/j.progsolidstchem.2014.04.010 · Cited by 62
Three-Dimensional Bicontinuous Nanocomposite from a Self-Assembled Block Copolymer for a High-Capacity All-Solid-State Lithium Battery Cathode
Wakayama, H., Yonekura, H., & Kawai, Y. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b01665 · Cited by 59
A New All-Solid-State Hyperbranched Star Polymer Electrolyte for Lithium Ion Batteries: Synthesis and Electrochemical Properties
Wang, A., Xu, H., Zhou, Q., Liu, X., Li, Z., Gao, R., Wu, N., Guo, Y., Li, H., & Zhang, L. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.07.003 · Cited by 58
Self-citation
Effects of the microstructure of solid-electrolyte-coated LiCoO 2 on its discharge properties in all-solid-state lithium batteries
Ito, Y., Yamakawa, S., Hayashi, A., & Tatsumisago, M. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01227f · Cited by 53
Free Mesogen Assisted Assembly of the Star-shaped Liquid-crystalline Copolymer/Polyethylene Oxide Solid Electrolytes for Lithium Ion Batteries
Tong, Y., Chen, L., He, X., & Chen, Y. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.11.072 · Cited by 40
Self-citation
Amorphous LiCoO 2 Li 2 SO 4 active materials: Potential positive electrodes for bulk-type all-oxide solid-state lithium batteries with high energy density
Nagao, K., Hayashi, A., Deguchi, M., Tsukasaki, H., Mori, S., & Tatsumisago, M. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.02.038 · Cited by 35
Fabrication of all-solid-state lithium secondary batteries with amorphous TiS4 positive electrodes and Li7La3Zr2O12 solid electrolytes
Matsuyama, T., Takano, R., Tadanaga, K., Hayashi, A., & Tatsumisago, M. (2015) · Solid State Ionics · doi:10.1016/j.ssi.2015.05.025 · Cited by 34
A novel polymer electrolyte membrane for application in solid state lithium metal battery
Zewde, B. W., Carbone, L., Greenbaum, S., & Hassoun, J. (2018) · Solid State Ionics · doi:10.1016/j.ssi.2017.12.039 · Cited by 34
All-solid-state Lithium Secondary Batteries Using Li2S–P2S5 Solid Electrolytes and LiFePO4 Electrode Particles with Amorphous Surface Layer
Sakuda, A., Kitaura, H., Hayashi, A., Tatsumisago, M., Hosoda, Y., Nagakane, T., & Sakamoto, A. (2012) · Chemistry Letters · doi:10.1246/cl.2012.260 · Cited by 33
Electrochemical stability of lithium bis(oxatlato) borate containing solid polymer electrolyte for l
Zhang, D., Yan, H., Zhu, Z., Zhang, H.-H., Wang, J., & Qilu (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.07.056 · Cited by 18
LITHIUM IONIC CONDUCTIVITY OF LISICON SINGLE CRYSTALS
Chen, L., Chang-qing, W., Wang, L., CHAO-LIANG, X., Bi, J., & 中国科学院物理研究所 (1980) · Acta Physica Sinica · doi:10.7498/aps.29.661 · Cited by 4
Self-citation
Research progress on interfaces of all solid state lithium batteries
Zhang, Q., Yao, X., Zhang, H., Zhang, L., & Xu, X. (2016) · Energy Storage Science and Technology · doi:10.12028/2095-4239.2016.0036 · Cited by 4
Progress in the study of solid/solid interface between lithium electrode and polymer electrolytes in lithium polymer batteries
Hu, C., 程琥, Li, T., Li, T., Yang, Y., & Yang, Y. (2006) · Huaxue jinzhan · Cited by 3
Research progress on solid-state lithium metal batteries
Duan, H., Ya-Xia, Y., Guo, Y., & Li-jun, W. (2017) · Energy Storage Science and Technology · doi:10.12028/j.issn.2095-4239.2017.0087 · Cited by 3
Progress on solid state polymer electrolyte for rechargeable Li battery
Fan, L., Dang, Z., Shi, Z., Nan, C., & 施展 (2002) · Cited by 1
Terminology of lithium battery（Draft）
Lin, C., Chuanhao, S., Yuan, Z., Zhang, R., Su, Y., Zhang, S., Zhang, X., Yu, H., Jieyun, Z., & Hong, L. W. (2018) · Energy Storage Science and Technology · doi:10.12028/j.issn.2095-4239.2017.0172 · Cited by 1

Flagged first, then by citations

Sorted by citations

High-energy long-cycling all-solid-state lithium metal batteries enabled by silver–carbon composite anodes
Lee, Y.-G., Fujiki, S., Jung, C., Suzuki, N., Yashiro, N., Omoda, R., Ko, D., Shiratsuchi, T., Sugimoto, T., Ryu, S., et al. (2020) · Nature Energy · doi:10.1038/s41560-020-0575-z · Cited by 1,752
Approaching Practically Accessible Solid-State Batteries: Stability Issues Related to Solid Electrolytes and Interfaces
Chen, R., Li, Q., Yu, X., Chen, L., & Li, H. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00268 · Cited by 1,700
Self-citation
Intermolecular Chemistry in Solid Polymer Electrolytes for High‐Energy‐Density Lithium Batteries
Zhou, Q., Ma, J., Dong, S., Li, X., & Cui, G. (2019) · Advanced Materials · doi:10.1002/adma.201902029 · Cited by 986
Lithium/Sulfide All‐Solid‐State Batteries using Sulfide Electrolytes
Wu, J., Liu, S., Han, F., Yao, X., & Wang, C. (2020) · Advanced Materials · doi:10.1002/adma.202000751 · Cited by 823
Interface Issues and Challenges in All‐Solid‐State Batteries: Lithium, Sodium, and Beyond
Lou, S., Zhang, F., Fu, C., Chen, M., Ma, Y., Yin, G., & Wang, J. (2020) · Advanced Materials · doi:10.1002/adma.202000721 · Cited by 560

See all 278

Authors: Nie, K., Hong, Y., Qiu, J., Li, Q., Yu, X., Li, H., & Chen, L.
Affiliations: Chinese Academy of Sciences (CN)
Corresponding author: Li, Qinghao
Yu, Xiqian
ORCID: Li, Qinghao
Yu, Xiqian
Li, Hong
Chen, Liquan
Venue: Frontiers in Chemistry
Publisher: Frontiers Media SA
Published: 2018-12-12
Volume: 6
Pages: 616-616
ISSN: 2296-2646 (ISSN-L)
DOI: 10.3389/fchem.2018.00616
PMC: PMC6299818
OpenAlex: W2903697882
Cited by: 278
References: 119
Citations by year: 2026: 32 · 2025: 39 · 2024: 33 · 2023: 42 · 2022: 42 · 2021: 42 · 2020: 34 · 2019: 14
FWCI: 1.25
Type: journal article
Language: en
Open access: gold
doi.org
Licence: cc-by
creativecommons.org/licenses/by/4.0/ (unspecified)
Locations: Frontiers in Chemistry (publishedVersion, cc-by)
Europe PMC (PubMed Central) (publishedVersion, cc-by)
PubMed Central (publishedVersion, cc-by)
PubMed (publishedVersion)
DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
Funders: National Natural Science Foundation of China (51822211)
eijing Municipal Science & Technology (Z171100000917021)
Topics: Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Battery Materials and Technologies
Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
Keywords: solid-state lithium batteries, cathode-electrolyte interface, solid-solid contact, solid polymer electrolytes, solid oxide electrolytes, composite electrolytes, interfacial instability

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Interfaces Between Cathode and Electrolyte in Solid State Lithium Batteries: Challenges and Perspectives

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Self-check

Citations

Cites

Cited by

Related

Metadata

Record

About these checks