The DOI matches its Crossref record; 52 of the 52 references it cites were found in a registry or an index.
Nanocellulose Reinforced Thermoplastic Starch (TPS), Polylactic Acid (PLA), and Polybutylene Succinate (PBS) for Food Packaging Applications
Open accessAbstract
Synthetic plastics are severely detrimental to the environment because non-biodegradable plastics do not degrade for hundreds of years. Nowadays, these plastics are very commonly used for food packaging. To overcome this problem, food packaging materials should be substituted with "green" or environmentally friendly materials, normally in the form of natural fiber reinforced biopolymer composites. Thermoplastic starch (TPS), polylactic acid (PLA) and polybutylene succinate (PBS) were chosen for the substitution, because of their availability, biodegradability, and good food contact properties. Plasticizer (glycerol) was used to modify the starch, such as TPS under a heating condition, which improved its processability. TPS films are sensitive to moisture and their mechanical properties are generally not suitable for food packaging if used alone, while PLA and PBS have a low oxygen barrier but good mechanical properties and processability. In general, TPS, PLA, and PBS need to be modified for food packaging requirements. Natural fibers are often incorporated as reinforcements into TPS, PLA, and PBS to overcome their weaknesses. Natural fibers are normally used in the form of fibers, fillers, celluloses, and nanocelluloses, but the focus of this paper is on nanocellulose. Nanocellulose reinforced polymer composites demonstrate an improvement in mechanical, barrier, and thermal properties. The addition of compatibilizer as a coupling agent promotes a fine dispersion of nanocelluloses in polymer. Additionally, nanocellulose and TPS are also mixed with PLA and PBS because they are costly, despite having commendable properties. Starch and natural fibers are utilized as fillers because they are abundant, cheap and biodegradable.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biodegradation of bioplastics in natural environments
Emadian, S. M., Onay, T. T., & Demirel, B. (2017) · Waste Management · doi:10.1016/j.wasman.2016.10.006 · Cited by 1,168
Isolation and characterization of nanocrystalline cellulose from sugar palm fibres (Arenga Pinnata)
Ilyas, R. A., Sapuan, S. M., & Ishak, M. R. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.11.045 · Cited by 568
Self-citationKargarzadeh, H., Huang, J., Lin, N., Ahmad, I., Mariano, M., Dufresne, A., Thomas, S., & Gałęski, A. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.07.008 · Cited by 496
Ilyas, R. A., Sapuan, S. M., Ishak, M. R., & Zainudin, E. S. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.09.002 · Cited by 448
Self-citationCombination of Poly(lactic) Acid and Starch for Biodegradable Food Packaging
Muller, J., González-Martínez, C., & Chiralt, A. (2017) · Materials · doi:10.3390/ma10080952 · Cited by 447
Cassava bagasse cellulose nanofibrils reinforced thermoplastic cassava starch
Teixeira, E. D. M., Pasquini, D., Curvelo, A. A. S., Corradini, E., Belgacem, M. N., & Dufresne, A. (2009) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2009.04.034 · Cited by 403
Preparation, properties and applications of nanocellulosic materials
Mondal, S. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.12.050 · Cited by 387
Polylactide (PLA) and Its Blends with Poly(butylene succinate) (PBS): A Brief Review
Su, S., Kopitzky, R., Tolga, S., & Kabasci, S. (2019) · Polymers · doi:10.3390/polym11071193 · Cited by 380
Ilyas, R. A., Sapuan, S. M., Ishak, M. R., & Zainudin, E. S. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.11.124 · Cited by 257
Self-citationIlyas, R. A., Sapuan, S. M., Sanyang, M. L., Ishak, M. R., & Zainudin, E. S. (2018) · Current Analytical Chemistry · doi:10.2174/1573411013666171003155624 · Cited by 253
Self-citationIlyas, R. A., Sapuan, S. M., Ibrahim, R., Abral, H., Ishak, M. R., Zainudin, E. S., Atikah, M. S. N., Mohd Nurazzi, N., Atiqah, A., Ansari, M. N. M., et al. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.08.028 · Cited by 250
Self-citationA new approach in compatibilization of the poly(lactic acid)/thermoplastic starch (PLA/TPS) blends
Akrami, M., Ghasemi, I., Azizi, H., Karrabi, M., & Seyedabadi, M. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.02.035 · Cited by 242
Abral, H., Basri, A., Muhammad, F., Fernando, Y., Hafizulhaq, F., Mahardika, M., Sugiarti, E., Sapuan, S. M., Ilyas, R. A., & Stephane, I. (2019) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2019.02.012 · Cited by 239
Self-citationComprehensive review on electrospinning of starch polymer for biomedical applications
Hemamalini, T., & Giri Dev, V. R. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.08.079 · Cited by 236
Teixeira, E. D. M., Curvelo, A. A. S., Corrêa, A. C., Marconcini, J. M., Glenn, G. M., & Mattoso, L. H. C. (2012) · Industrial Crops and Products · doi:10.1016/j.indcrop.2011.11.036 · Cited by 222
Influence of formamide and water on the properties of thermoplastic starch/poly(lactic acid) blends
Wang, N., Yu, J., Chang, P. R., & Ma, X. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.025 · Cited by 221
Ilyas, R. A., Sapuan, S. M., Ishak, M. R., & Zainudin, E. S. (2017) · BioResources · doi:10.15376/biores.12.4.8734-8754 · Cited by 218
Self-citationSanyang, M. L., Sapuan, S. M., Jawaid, M., Ishak, M. R., & Sahari, J. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.10.037 · Cited by 217
Self-citationDevelopment and characterization of sugar palm starch and poly(lactic acid) bilayer films
Sanyang, M. L., Sapuan, S. M., Jawaid, M., Ishak, M. R., & Sahari, J. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.03.051 · Cited by 197
Self-citationRecent progress in selected bio-nanomaterials and their engineering applications: An overview
Mishra, R. K., Ha, S. K., Verma, K., & Tiwari, S. K. (2018) · Journal of Science: Advanced Materials and Devices · doi:10.1016/j.jsamd.2018.05.003 · Cited by 190
Montero, B., Rico, M., Rodríguez-Llamazares, S., Barral, L., & Bouza, R. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.10.073 · Cited by 187
Syafri, E., Sudirman, Mashadi, Yulianti, E., Deswita, Asrofi, M., Abral, H., Sapuan, S. M., Ilyas, R. A., & Fudholi, A. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.10.016 · Cited by 175
Self-citationSugar Palm Starch-Based Composites for Packaging Applications
Sanyang, M. L., Ilyas, R. A., Sapuan, S. M., & Jumaidin, R. (2017) · Springer eBooks · doi:10.1007/978-3-319-67319-6_7 · Cited by 167
Self-citationZeng, J.-B., Jiao, L., Li, Y.-D., Srinivasan, M., Li, T., & Wang, Y.-Z. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.08.051 · Cited by 165
Cellulose-Nanofiber-Reinforced Poly(lactic acid) Composites Prepared by a Water-Based Approach
Wang, T., & Drzal, L. T. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am301438g · Cited by 165
B., A., Suin, S., & Khatua, B. B. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.04.024 · Cited by 163
Highly transparent and antimicrobial PVA based bionanocomposites reinforced by ginger nanofiber
Abral, H., Ariksa, J., Mahardika, M., Handayani, D., Aminah, I., Sandrawati, N., Sapuan, S. M., & Ilyas, R. A. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2019.106186 · Cited by 160
Self-citationThermal and Morphological Properties of Poly (Lactic Acid)/Nanocellulose Nanocomposites
Khoo, R. Z., Ismail, H., & Chow, W. S. (2016) · Procedia Chemistry · doi:10.1016/j.proche.2016.03.086 · Cited by 152
Trifol, J., Plackett, D., Sillard, C., Szabó, P., Bras, J., & Daugaard, A. E. (2016) · Polymer International · doi:10.1002/pi.5154 · Cited by 139
Enzymatic degradation of PLA/cellulose nanocrystal composites
Hegyesi, N., Zhang, Y., Kohári, A., Polyák, P., Sui, X., & Pukánszky, B. (2019) · Industrial Crops and Products · doi:10.1016/j.indcrop.2019.111799 · Cited by 134
Xiong, Z., Li, C., Ma, S., Feng, J., Yang, Y., Zhang, R., & Zhu, J. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.02.054 · Cited by 130
Processing and Characterization of Cellulose Nanocrystals/Polylactic Acid Nanocomposite Films
Sullivan, E. M., Moon, R. J., & Kalaitzidou, K. (2015) · Materials · doi:10.3390/ma8125447 · Cited by 127
Wang, N., Yu, J., Chang, P. R., & Ma, X. (2007) · Starch - Stärke · doi:10.1002/star.200700617 · Cited by 121
Ilyas, R. A., Sapuan, S. M., Ishak, M. R., & Zainudin, E. S. (2018) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/368/1/012006 · Cited by 113
Self-citationBagde, P., & Vigneshwaran, N. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.115021 · Cited by 104
Thermal degradation and physical aging of poly(lactic acid) and its blends with starch
Acioli‐Moura, R., & Sun, X. S. (2008) · Polymer Engineering and Science · doi:10.1002/pen.21019 · Cited by 99
Xiong, Z., Zhang, L., Ma, S., Yang, Y., Zhang, C., Tang, Z., & Zhu, J. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.01.038 · Cited by 97
Silane modified starch for compatible reactive blend with poly(lactic acid)
Jariyasakoolroj, P., & Chirachanchai, S. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.02.018 · Cited by 97
Xiong, Z., Ma, S., Fan, L., Tang, Z., Zhang, R., Na, H., & Zhu, J. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.01.007 · Cited by 94
Li, J., Luo, X., Lin, X., & Zhou, Y. (2013) · Starch - Stärke · doi:10.1002/star.201200260 · Cited by 92
Zhang, Y., Cui, L., Xu, H. Y., Feng, X., Wang, B., Pukánszky, B., Mao, Z., & Sui, X. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.06.204 · Cited by 90
Garalde, R. A., Thipmanee, R., Jariyasakoolroj, P., & Sane, A. (2019) · Heliyon · doi:10.1016/j.heliyon.2019.e01251 · Cited by 88
Yu, Z., Dhital, R., Wang, W., Sun, L., Zeng, W., Mustapha, A., & Lin, M. (2019) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2019.100366 · Cited by 82
Li, Y., Fu, Q.-Q., Wang, M., & Zeng, J. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.01.089 · Cited by 76
Xu, J., Manepalli, P. H., Zhu, L., Narayan-Sarathy, S., & Alavi, S. (2019) · Journal of Polymer Research · doi:10.1007/s10965-019-1783-8 · Cited by 76
Preparation and characterization of dry method esterified starch/polylactic acid composite materials
Zuo, Y., Gu, J., Yang, L., Qiao, Z., Tan, H., & Zhang, Y. (2013) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2013.11.026 · Cited by 71
Thermoplastic starch/poly(lactic acid) sheets coated with cross-linked chitosan
Soares, F. C., Yamashita, F., Müller, C. M. O., & Pires, A. T. N. (2012) · Polymer Testing · doi:10.1016/j.polymertesting.2012.09.005 · Cited by 70
Liu, D., Qi, Z., Zhang, Y., Xu, J., & Guo, B. (2015) · Starch - Stärke · doi:10.1002/star.201500060 · Cited by 57
Zhang, X., & Zhang, Y. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.07.078 · Cited by 42
Zhou, M., Fan, M., Zhao, Y., Jin, T., & Fu, Q. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.12.040 · Cited by 41
Nanocellulose in Food Packaging
Criado, P., Hossain, F., Salmieri, S., & Lacroix, M. (2018) · Wiley eBooks · doi:10.1002/9781119160243.ch10 · Cited by 24
(2001) · doi:10.1002/1521-3900(200110)175:1<55::aid-masy55>3.0.co;2-k
Cited by
Asgher, M., Qamar, S. A., Bilal, M., & Iqbal, H. M. N. (2020) · Food Research International · doi:10.1016/j.foodres.2020.109625 · Cited by 721
Tarique, J., Sapuan, S. M., & Khalina, A. (2021) · Scientific Reports · doi:10.1038/s41598-021-93094-y · Cited by 522
Self-citationPolylactic Acid (PLA) Biocomposite: Processing, Additive Manufacturing and Advanced Applications
Ilyas, R. A., Sapuan, S. M., Harussani, M. M., Hakimi, M. Y. A. Y., Haziq, M. Z. M., Atikah, M. S. N., Asyraf, M. R. M., Ishak, M. R., Razman, M. R., Nurazzi, N. M., et al. (2021) · Polymers · doi:10.3390/polym13081326 · Cited by 513
Self-citationPoly(butylene succinate) (PBS): Materials, processing, and industrial applications
Barletta, M., Aversa, C., Ayyoob, M., Gisario, A., Hamad, K., Mehrpouya, M., & Vahabi, H. (2022) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2022.101579 · Cited by 443
Micro- and Nanocellulose in Polymer Composite Materials: A Review
Omran, A. A. B., Mohammed, A. A. B. A., Sapuan, S. M., Ilyas, R. A., Asyraf, M. R. M., Rahimian Koloor, S. S., & Petrů, M. (2021) · Polymers · doi:10.3390/polym13020231 · Cited by 398
Self-citation
Metadata
- Authors
- Nazrin, A., Sapuan, S. M., Zuhri, M. Y. M., Ilyas, R. A., Syafiq, R., & Sherwani, S. F. K.
- Venue
- Frontiers in Chemistry
- Publisher
- Frontiers Media SA
- Published
- 2020-04-15
- Volume
- 8
- Pages
- 213-213
- ISSN
- 2296-2646 (ISSN-L)
- OpenAlex
- W3017040401
- Cited by
- 294
- References
- 52
- FWCI
- 10.87
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.