The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Biomass Torrefaction Process, Product Properties, Reactor Types, and Moving Bed Reactor Design Concepts
Open accessAbstract
Torrefaction, a thermal pretreatment process, is gaining attention as it improves the physical properties and chemical composition of biomass for recycling. During torrefaction, biomass is heated slowly in an inert or oxygen-deficit environment to a maximum temperature of 300°C. The torrefaction process creates a solid uniform product with lower moisture and higher energy content than the raw biomass. During torrefaction, moisture and some volatile organic compounds volatilize from the biomass. Depending on stoichiometry and other conditions, non-condensable gas species, including CO and CO 2, are formed. The specific objectives of this research are to: 1) understand the impact of torrefaction on product quality in terms of the physical properties, chemical composition, and storage behavior of the biomass; 2) discuss the various reactors used for biomass torrefaction; and 3) develop a model for designing a moving bed torrefier, considering fundamental heat and mass transfer calculations. Torrefaction improves the physical properties, chemical composition, and energy and storage properties of biomass. Torrefaction of biomass at 300°C increases the energy content by about 30% as compared to the raw biomass. For example, when torrefied, the calorific value of the biomass increases from about 18–19 MJ/kg to about 20–24 MJ/kg. The torrefied material has a moisture content of about 1–3% wet basis (w.b.). The loss of the hydroxyl group during torrefaction makes the biomass hydrophobic. The brittle nature of the torrefied biomass makes it easier to grind. The devolatilization and carbonization reactions change the proximate and ultimate composition. The carbon content increases, whereas the hydrogen, oxygen, and nitrogen content of the biomass decreases. Despite its superior properties, the commercialization of torrefaction technology is slow due to challenges associated with reactor design and final product quality. The different types of reactors that are typically used for biomass torrefaction are the fixed bed, rotary drum, microwave, fluidized bed, and horizontal and vertical moving bed. The moving bed reactor has gained popularity among the different torrefaction reactor designs as it is easy to operate and scale. In addition, it helps produce a uniform torrefied product. In this paper, different moving bed torrefaction and gas recycle concepts are conceptualized to assess the features, advantages, and disadvantages of various design and operating concepts. These designs include example concepts for: 1) vertical and horizontal torrefaction reactors; 2) recycle of all or a portion of the torrefier off-gas; 3) counter and co-flowing gas and biomass in the torrefier; 4) controls for the system temperatures, pressures, flow rates, and gas compositions; and 5) the ability to sample the biomass feed, torrefied product, and gas streams for analysis as needed to investigate the thermal decomposition, physical behavior, and operational performance of the torrefaction system. The article also briefly describes the solid feed system, gas supply and recycle system, solid product management, torrefier gas monitoring, control system, and fugitive dust emissions control. The model presented in this paper includes a set of equations for basic calculations to configure the torrefaction reactor dimensions, such as diameter and height of the moving bed torrefier for different capacities based on target and calculated solids and gas velocities, residence times, and temperatures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Combustion and gasification characteristics of chars from raw and torrefied biomass
Fisher, E. M., Dupont, C., Darvell, L. I., Commandré, J.-M., Saddawi, A., Jones, J. M., Grateau, M., Nocquet, T., & Salvador, S. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.05.109 · Cited by 171
Combustion properties of torrefied willow compared with bituminous coals
Jones, J. M., Bridgeman, T. G., Darvell, L. I., Gudka, B., Saddawi, A., & Williams, A. (2012) · Fuel Processing Technology · doi:10.1016/j.fuproc.2012.03.010 · Cited by 81
Cited by
Thermochemical conversion of biomass: Potential future prospects
Wang, Y., & Wu, J. J. (2023) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2023.113754 · Cited by 259
Yadav, N., Yadav, G., Bakthavachalam, V., Potturaja, L., Roy, J. K., & Elumalai, S. (2025) · Bioresource Technology · doi:10.1016/j.biortech.2024.131948 · Cited by 20
Rashwan, S. S., Adelusi, O., Boulet, M., & Moreau, S. (2025) · Energy Conversion and Management · doi:10.1016/j.enconman.2025.119516 · Cited by 10
Metadata
- Authors
- Tumuluru, J. S., Ghiasi, B., Soelberg, N. R., & Sokhansanj, S.
- Venue
- Frontiers in Energy Research
- Publisher
- Frontiers Media SA
- Published
- 2021-09-17
- Volume
- 9
- ISSN
- 2296-598X (ISSN-L)
- OpenAlex
- W3199147880
- Cited by
- 214
- References
- 2
- FWCI
- 7.21
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Biomass Torrefaction Process, Product Properties, Reactor Types, and Moving Bed Reactor Design Concepts. https://app.cochat.ai/papers/10.3389/fenrg.2021.728140
- The paper
- Tumuluru, J. S., Ghiasi, B., Soelberg, N. R., & Sokhansanj, S. (2021). Biomass Torrefaction Process, Product Properties, Reactor Types, and Moving Bed Reactor Design Concepts. Frontiers in Energy Research. https://doi.org/10.3389/fenrg.2021.728140
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.