Fin Ray® Effect Inspired Soft Robotic Gripper: From the RoboSoft Grand Challenge toward Optimization
Open accessThe DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
A soft robotic gripper for a Tele-operable In-Home Robotic Assistant (TIHRA) for the mobility impaired is presented. This gripper is inspired by the Fin Ray\textsuperscript{\textregistered} Effect, which is derived from the physiology of fish fins. The gripper “fingers” are soft and triangular with hard crossbeams that buckle and deform in to conform around objects. The fingers of the TIHRA were altered from the original Fin Ray\textsuperscript{\textregistered} design in order to create a preferred bending direction, resulting in less force required to obtain a good grip on an object. The entire gripper can be 3D printed as part of a soft robotic hand made from hard and soft materials, and the motor-tendon actuation system attaches in a limited number of steps. Testing of the gripper included modeling the fingers and comparing grip strength them to the original Fin Ray\textsuperscript{\textregistered} to verify their optimization. Models show that the TIHRA fingers deform 15\% more than traditional fingers when subjected to the same force. The TIHRA gripper was capable of holding 560 g, approximately 40\% more than the gripper equipped with traditional fingers. This difference was statistically significant (p $\ll$ 0.001). The TIHRA hand was also tested at the 2016 RoboSoft Grand Challenge in Livorno, Italy. The gripper successfully completed some tasks, highlighting its conformability, deformability, and morphology, but performed poorly in others, demonstrating the need to increase the gripper strength to prevent out of plane twisting and bending and to increase the force that the gripper can exert. The gripper was attached to a Baxter robot to demonstrate its ability to interface with existing technology, and other versions of the gripper were designed and manufactured to show the scalability and versatility of the design.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Soft robotics: a bioinspired evolution in robotics
Kim, S., Laschi, C., & Trimmer, B. (2013) · Trends in Biotechnology · doi:10.1016/j.tibtech.2013.03.002 · Cited by 2,092
A compliant, underactuated hand for robust manipulation
Odhner, L. U., Jentoft, L. P., Claffee, M. R., Corson, N., Tenzer, Y., Ma, R. R., Buehler, M., Kohout, R., Howe, R. D., & Dollar, A. M. (2014) · The International Journal of Robotics Research · doi:10.1177/0278364913514466 · Cited by 598
An octopus-bioinspired solution to movement and manipulation for soft robots
Calisti, M., Giorelli, M., Levy, G., Mazzolai, B., Hochner, B., Laschi, C., & Dario, P. (2011) · Bioinspiration & Biomimetics · doi:10.1088/1748-3182/6/3/036002 · Cited by 465 · cited 1×
“, 2016), manipulators inspired by the octopus (Calisti et al., 2011; Cianchetti et al., 2011; Mazzolai et al., 2012), electroactive polymer grippers (Alici and Huynh, 2007), and granular jamming (Brown et al.”
BackgroundBiologically Inspired Soft Robot for Thumb Rehabilitation1
Maeder-York, P., Clites, T., Boggs, E., Neff, R., Polygerinos, P., Holland, D., Stirling, L., Galloway, K., Wee, C., & Walsh, C. (2014) · Journal of Medical Devices · doi:10.1115/1.4027031 · Cited by 110
Cited by
Intelligent robots for fruit harvesting: recent developments and future challenges
Zhou, H., Wang, X., Au, W., Kang, H., & Chen, C. (2022) · Precision Agriculture · doi:10.1007/s11119-022-09913-3 · Cited by 316
Metadata
- Authors
- Crooks, W., Vukasin, G., O’Sullivan, M., Messner, W., & Rogers, C.
- Venue
- Frontiers in Robotics and AI
- Publisher
- Frontiers Media SA
- Published
- 2016-11-10
- Volume
- 3
- ISSN
- 2296-9144 (ISSN-L)
- OpenAlex
- W2551680314
- Cited by
- 209
- References
- 4
- FWCI
- 3.19
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Fin Ray® Effect Inspired Soft Robotic Gripper: From the RoboSoft Grand Challenge toward Optimization. https://app.cochat.ai/papers/10.3389/frobt.2016.00070
- The paper
- Crooks, W., Vukasin, G., O’Sullivan, M., Messner, W., & Rogers, C. (2016). Fin Ray® Effect Inspired Soft Robotic Gripper: From the RoboSoft Grand Challenge toward Optimization. Frontiers in Robotics and AI. https://doi.org/10.3389/frobt.2016.00070
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.