Modeling electrolysis in reduced gravity: producing oxygen from in-situ resources at the moon and beyond
Open accessThe DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
Abstract
Molten Regolith Electrolysis, as an in situ resource utilization (ISRU) technology, has the potential to enable the production of oxygen and metallic alloys on the Lunar surface; opening new doors in Cis-Lunar, and eventually Martian space exploration. This research studies the fundamental physics which govern the formation, growth, detachment, and rise of electrolytic bubbles. To this end, computational fluid dynamic (CFD) models were developed and run, to simulate water electrolysis, molten salt electrolysis (MSE), and molten Lunar regolith (MRE) electrolysis across multiple reduced gravity levels. The results demonstrate that reduced gravity, electrode surface roughness (possibly due to surface degradation), fluid properties, and electrode orientation can all affect electrolytic efficiency and possibly even stall electrolysis by delaying bubble detachment. The findings of this research must be considered when designing and operating electrolysis systems at reduced gravity levels.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Volume of fluid (VOF) method for the dynamics of free boundaries
Hirt, C. W., & Nichols, B. D. (1981) · Journal of Computational Physics · doi:10.1016/0021-9991(81)90145-5 · Cited by 16,105
RESISTANCE OF SOLID SURFACES TO WETTING BY WATER
Wenzel, R. N. (1936) · Industrial & Engineering Chemistry · doi:10.1021/ie50320a024 · Cited by 13,316
A continuum method for modeling surface tension
Brackbill, J. U., Kothe, D. B., & Zemach, C. (1992) · Journal of Computational Physics · doi:10.1016/0021-9991(92)90240-y · Cited by 10,338
Bubble Formation and Bubble Rise Velocity in Gas−Liquid Systems: A Review
Kulkarni, A. A., & Joshi, J. B. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie049131p · Cited by 817
Bubble growth and departure modes on wettable/non-wettable porous foams in alkaline water splitting
Iwata, R., Zhang, L., Wilke, K. L., Gong, S., He, M., Gallant, B. M., & Wang, E. N. (2021) · Joule · doi:10.1016/j.joule.2021.02.015 · Cited by 408
Apparent contact angles on rough surfaces: the Wenzel equation revisited
Wolansky, G., & Marmur, A. (1999) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/s0927-7757(99)00098-9 · Cited by 400
Janz, G. J., Tomkins, R. P. T., Allen, C. B., Downey, J. R., Garner, G. L., Krebs, U., & Singer, S. K. (1975) · Journal of Physical and Chemical Reference Data · doi:10.1063/1.555527 · Cited by 307
A numerical solution to the effects of surface roughness on water–coal contact angle
Li, C., Zhang, J., Han, J., & Yao, B. (2021) · Scientific Reports · doi:10.1038/s41598-020-80729-9 · Cited by 217
Requirements for Mesh Resolution in 3D Computational Hemodynamics
Prakash, S., & Ethier, C. R. (2000) · Journal of Biomechanical Engineering · doi:10.1115/1.1351807 · Cited by 171
Pool boiling heat transfer on small heaters: effect of gravity and subcooling
Kim, J., Benton, J. F., & Wisniewski, D. (2002) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(02)00108-4 · Cited by 155
Direct simulation of vapor bubble growth
Welch, S. W. J. (1998) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(97)00285-8 · Cited by 109
Albadawi, A., Donoghue, D. B., Robinson, A. J., Murray, D. B., & Delauré, Y. (2013) · Chemical Engineering Science · doi:10.1016/j.ces.2012.12.004 · Cited by 101
Influence of buoyancy on bubble formation at submerged orifices
Pamperin, O., & Rath, H. J. (1995) · Chemical Engineering Science · doi:10.1016/0009-2509(95)00140-z · Cited by 81
Analysis of velocity data taken in Surface Tension Driven Convection Experiment in microgravity
Kamotani, Y., OSTRACH, S., & Pline, A. D. (1994) · Physics of Fluids · doi:10.1063/1.868432 · Cited by 76
Bubble Dynamics and Heat Transfer during Pool and Flow Boiling
Dhir, V. K., Abarajith, H. S., & Li, D. (2007) · Heat Transfer Engineering · doi:10.1080/01457630701266421 · Cited by 75
Modes of bubble growth in the slow-formation regime of nucleate pool boiling
Chesters, A. K. (1978) · International Journal of Multiphase Flow · doi:10.1016/0301-9322(78)90003-4 · Cited by 57
A Thermocapillary Convection Experiment in Microgravity
Kamotani, Y., OSTRACH, S., & Pline, A. D. (1995) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.2822621 · Cited by 56
Chiaramonte, F. P., & Joshi, J. A. (2013) · NASA Technical Reports Server (NASA) · Cited by 51
Predicting the efficiency of oxygen-evolving electrolysis on the Moon and Mars
Lomax, B. A., Just, G. H., McHugh, P. J., Broadley, P. K., Hutchings, G. C., Burke, P. A., Roy, M. J., Smith, K. L., & Symes, M. D. (2022) · Nature Communications · doi:10.1038/s41467-022-28147-5 · Cited by 45
Self-citationA numerical study of quasi-static gas injected bubble growth: Some aspects of gravity
Bari, S. D., Lakehal, D., & Robinson, A. J. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.04.002 · Cited by 42
Sibille, L., Sadoway, D., Sirk, A., Tripathy, P., Melendez, O., Standish, E., Dominguez, J., Stefanescu, D., Curreri, P., & Poizeau, S. (2009) · 47th AIAA Aerospace Sciences Meeting including The New Horizons Forum and Aerospace Exposition · doi:10.2514/6.2009-659 · Cited by 42
Effects of Heating Mode on Steady Axisymmetric Thermocapillary Flows in Microgravity
Kamotani, Y., Chang, A., & OSTRACH, S. (1996) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.2824034 · Cited by 40
Fundamentals and future applications of electrochemical energy conversion in space
Brinkert, K., & Mandin, P. P. (2022) · npj Microgravity · doi:10.1038/s41526-022-00242-3 · Cited by 40
Mandin, P. P., Cense, J. M., Georges, B., Favre, V., Pauporté, T., Fukunaka, Y., & Lincot, D. (2007) · Electrochimica Acta · doi:10.1016/j.electacta.2007.01.044 · Cited by 38
Bubble formation at submerged nozzles for small gas flow rate under low gravity
Tsuge, H., Terasaka, K., Koshida, W., & Matsue, H. (1997) · Chemical Engineering Science · doi:10.1016/s0009-2509(97)00159-0 · Cited by 34
Akay, Ö., Poon, J., Robertson, C., Abdi, F. F., Cuenya, B. R., Giersig, M., & Brinkert, K. (2022) · Advanced Science · doi:10.1002/advs.202105380 · Cited by 26
Semi-Unstructured Grid Methods for Turbomachinery Applications
Contreras, J. O., Corral, R., ̃eda, J. F. ́.-C., Pastor, G., & Vasco, C. (2002) · ASME Turbo Expo: Turbomachinery Technical Conference and Exposition (GT) · doi:10.1115/gt2002-30572 · Cited by 23
Scaling two-phase flows to Mars and Moon gravity conditions
Hurlbert, K. M., Witte, L. C., Best, F. R., & Kurwitz, C. (2004) · International Journal of Multiphase Flow · doi:10.1016/j.ijmultiphaseflow.2004.01.004 · Cited by 23
Thermophysical property evolution during molten regolith electrolysis
Humbert, M. S., Brooks, G. A., Duffy, A. R., Hargrave, C. O., & Rhamdhani, M. A. (2022) · Planetary and Space Science · doi:10.1016/j.pss.2022.105527 · Cited by 18
Experimental investigation of two-phase electrolysis processes: comparison with or without gravity
Derhoumi, Z., Mandin, P. P., Roustan, H., & Wüthrich, R. (2013) · Journal of Applied Electrochemistry · doi:10.1007/s10800-013-0598-2 · Cited by 17
Gravity and Heater Size Effects on Pool Boiling Heat Transfer
Kim, J., & Raj, R. (2014) · NASA Technical Reports Server (NASA) · Cited by 16
Burke, P. A., & Dunbar, B. J. (2021) · AIAA SciTech Forum · doi:10.2514/6.2021-1838 · Cited by 9
Self-citationSome results from the Surface Tension Driven Convection Experiment aboard USML-1 Spacelab
Kamotani, Y., OSTRACH, S., & Pline, A. D. (1994) · 32nd Aerospace Sciences Meeting and Exhibit · doi:10.2514/6.1994-238 · Cited by 6
Growth and departure of individual bubbles at a wall
Cooper, M. G. (1982) · Flow Turbulence and Combustion · doi:10.1007/bf00385939 · Cited by 5
Hamdan, M., Sebastia‐Saez, D., Hamdan, M., & Arellano‐García, H. (2020) · Computer-aided chemical engineering/Computer aided chemical engineering · doi:10.1016/b978-0-12-823377-1.50059-8 · Cited by 5
One to two-phase electrolysis processes behavior under spatial conditions
Mandin, P. P., Matsushima, H., Fukunaka, Y., Wüthrich, R., Calderon, E. H., & Lincot, D. (2008) · HAL · Cited by 4
Burke, P. A., Nord, M. E., Berdis, J. R., & Hibbitts, C. A. (2023) · AIAA Accelerating Space Commerce, Exploration, and New Discovery Conference (ASCEND) · doi:10.2514/6.2023-4793 · Cited by 4
Self-citationBubble Formation and Coalescence Under the Influence of Electric Fields
Herman, Č. (2013) · ASME International Mechanical Engineering Congress and Exposition (IMECE) · doi:10.1115/imece2013-64991 · Cited by 2
Dynamics of bubble growth on a heated surface under low gravity conditions
Qiu, D., Dhir, V. K., Hasan, M. M., Chao, D. F., Neumann, E. S., Yee, G. F., Birchenough, A. G., & Withrow, J. (2000) · AIAA Aerospace Sciences Meeting and Exhibit · doi:10.2514/6.2000-852 · Cited by 2
Aurora 7: The Mercury Space Flight of M. Scott Carpenter
Burgess, C. (2015) · Springer eBooks · doi:10.1007/978-3-319-20439-0 · Cited by 1
Research works printed but not linked: 4
- Burke, 2021, Computational fluid dynamic (CFD) modeling and experimental study of the formation and buoyancy-driven detachment of bubbles in variable gravity environments (PhD)
- Fritz, 1936, Über den Verdampfungsvorgang nach kinematographischen Aufnahmen an Dampfblasen, Phys. Z, 37, 391
- Heyns, 2014, Modelling surface tension dominated multiphase flows using the VOF approach
- Lippmann, 1875, Relation entre les phénomènes électriques et capillaires, Ann. Chim. Phys., 5
Cited by
A comprehensive review of lunar-based manufacturing and construction
Azami, M., Kazemi, Z., Moazen, S., Dubé, M., Potvin, M.-J., & Skonieczny, K. (2024) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2024.101045 · Cited by 57
Critical Electrochemistry Technologies Applicable in Space Exploration
Xu, R., Lv, Z., Li, S., He, J., & Song, J. (2025) · Advanced Science · doi:10.1002/advs.202504447 · Cited by 16
Extraction of Aluminum from Lunar Regolith through Molten Salt Electrolysis
Ortega, J. N., Sander, T. P., Smith, J. D., Rezaei, F., Bayless, D. J., Schonberg, W., Stutts, D. S., & Han, F. D. (2025) · Acta Astronautica · doi:10.1016/j.actaastro.2025.04.064 · Cited by 13
Lomax, B. A., Selmeci, Á., Rützler, A., Schild, T., Symes, M. D., Bonsall, E., Schröder, C., Conti, M., Lindner, R., & Carpenter, J. D. (2025) · Acta Astronautica · doi:10.1016/j.actaastro.2025.04.049 · Cited by 8
“…compared to Earth ’ s environment is also important, for example particle behaviour in a fluidised bed reactor may be different [11] or gravity induced bubble retention on anodes in electrolytic processes may impact process efficiency in different ways depending on electrolyte composition [12,13].”
Improving molten regolith electrolysis with zirconia-based hollow anode technology
Yu, K., West, W. C., Stokes, J. L., Harder, B. J., Reidy, L. P., Dominguez, J. A., & Faber, K. T. (2025) · Acta Astronautica · doi:10.1016/j.actaastro.2025.06.028 · Cited by 8
Metadata
- Authors
- Burke, P. A., Nord, M. E., Hibbitts, C. A., & Berdis, J. R.
- Affiliations
- Johns Hopkins University (US)
- Corresponding author
- Burke, Paul A.
- Venue
- Frontiers in Space Technologies
- Publisher
- Frontiers Media SA
- Published
- 2024-04-02
- Volume
- 5
- ISSN
- 2673-5075 (ISSN-L)
- OpenAlex
- W4393409787
- Cited by
- 15
- References
- 40
- Citations by year
- 2026: 7 · 2025: 7 · 2024: 1
- FWCI
- 2.11
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Frontiers in Space Technologies (publishedVersion, cc-by)
- Topics
- Physical Sciences › Chemistry › Electrochemistry › Molten salt chemistry and electrochemical processes
- Physical Sciences › Materials Science › Metals and Alloys › Metallurgical Processes and Thermodynamics
- Physical Sciences › Engineering › Aerospace Engineering › Space Exploration and Technology
- Keywords
- in-situ resource utilization, lunar oxygen production, reduced gravity, bubble detachment, molten salt electrolysis, water electrolysis, electrode surface roughness, electrode orientation, electrolysis efficiency, lunar regolith, Mars exploration
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.