State-of-the-Art and Advancement Paths for Inductive Pulsed Plasma Thrusters
Open accessThe DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
An inductive pulsed plasma thruster (IPPT) operates by pulsing high current through an inductor, typically a coil of some type, producing an electromagnetic field that drives current in a plasma, accelerating it to high speed. The IPPT is electrodeless, with no direct electrical connection between the externally applied pulsed high-current circuit and the current conducted in the plasma. Several different configurations were proposed and tested, including those that produce a plasma consisting of an accelerating current sheet and those that use closed magnetic flux lines to help confine the plasma during acceleration. Specific impulses up to 7000 s and thrust efficiencies over 50% have been measured. The present state-of-the-art for IPPTs is reviewed, focusing on the operation, modeling techniques, and major subsystems found in various configurations. Following that review is documentation of IPPT technology advancement paths that were proposed or considered.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Survey of Wide Bandgap Power Semiconductor Devices
Millán, J., Godignon, P., Perpiñà, X., Pérez-Tomás, A., & Rebollo, J. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2268900 · Cited by 2,685
Condition Monitoring for Device Reliability in Power Electronic Converters: A Review
Yang, S., Xiang, D., Bryant, A., Mawby, P., Ran, L., & Tavner, P. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2049377 · Cited by 1,278
Patel, M. R. (2004) · doi:10.1201/9781420038217 · Cited by 292
Cited by
Electric propulsion methods for small satellites: A review
O’Reilly, D., Herdrich, G., & Kavanagh, D. F. (2021) · Aerospace · doi:10.3390/aerospace8010022 · Cited by 177
“Some recent works have focused on the implementation of solid state switching devices for the discharge capacitors which is expected to improve lifetime of PPTs. Eliminating the voltage reversal on the energy storage capacitors by using alternative circuit topologies opposed to Resistor, Inductor, Capacitor (RLC) as w…”
BackgroundInfluentialReview of High-Power Electrostatic and Electrothermal Electric Propulsion
Jovel, D. R., Walker, M. L. R., & Herman, D. (2022) · Journal of Propulsion and Power · doi:10.2514/1.b38594 · Cited by 38
Plasma propulsion modeling with particle-based algorithms
Taccogna, F., Cichocki, F., Eremin, D., Fubiani, G., & Garrigues, L. (2023) · Journal of Applied Physics · doi:10.1063/5.0153862 · Cited by 29
Numerical aspects of particle-in-cell simulations for plasma-motion modeling of electric thrusters
Gallo, G., Isoldi, A., Del Gatto, D., Savino, R., Capozzoli, A., Curcio, C., & Liseno, A. (2021) · Aerospace · doi:10.3390/aerospace8050138 · Cited by 8
Metadata
- Authors
- Polzin, K., Martin, A., Little, J., Promislow, C., Jorns, B., & Woods, J.
- Venue
- Aerospace
- Publisher
- MDPI AG
- Published
- 2020-07-24
- Volume
- 7
- Issue
- 8
- Pages
- 105
- ISSN
- 2226-4310 (ISSN-L)
- OpenAlex
- W3045413514
- Cited by
- 44
- References
- 3
- FWCI
- 1.69
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.