The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Digital Twin and Virtual Reality Based Methodology for Multi-Robot Manufacturing Cell Commissioning
Open accessAbstract
Intelligent automation, including robotics, is one of the current trends in the manufacturing industry in the context of “Industry 4.0”, where cyber-physical systems control the production at automated or semi-automated factories. Robots are perfect substitutes for a skilled workforce for some repeatable, general, and strategically-important tasks. However, this transformation is not always feasible and immediate, since certain technologies do not provide the required degree of flexibility. The introduction of collaborative robots in the industry permits the combination of the advantages of manual and automated production. In some processes, it is necessary to incorporate robots from different manufacturers, thus the design of these multi-robot systems is crucial to guarantee the maximum quality and efficiency. In this context, this paper presents a novel methodology for process automation design, enhanced implementation, and real-time monitoring in operation based on creating a digital twin of the manufacturing process with an immersive virtual reality interface to be used as a virtual testbed before the physical implementation. Moreover, it can be efficiently used for operator training, real-time monitoring, and feasibility studies of future optimizations. It has been validated in a use case which provides a solution for an assembly manufacturing process.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Cyber-Physical Systems architecture for Industry 4.0-based manufacturing systems
Lee, J., Bagheri, B., & Kao, H.-A. (2015) · Manufacturing Letters · doi:10.1016/j.mfglet.2014.12.001 · Cited by 5,113
Digital Twin: Mitigating Unpredictable, Undesirable Emergent Behavior in Complex Systems
Grieves, M., & Vickers, J. (2017) · Transdisciplinary Perspectives on Complex Systems · doi:10.1007/978-3-319-38756-7_4 · Cited by 3,727
Digital twin-driven product design, manufacturing and service with big data
Tao, F., Cheng, J., Qi, Q., Zhang, M., Zhang, H., & Sui, F. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-0233-1 · Cited by 2,920
About The Importance of Autonomy and Digital Twins for the Future of Manufacturing
Rosen, R., von Wichert, G., Lo, G., & Bettenhausen, K. D. (2015) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2015.06.141 · Cited by 1,474 · cited 2×
“The use of model-based simulation is necessary not only during design and planning, but also during the production phases for such purposes as diagnosis, control, and optimization [10].”
BackgroundMethodDigital Twin—The Simulation Aspect
Boschert, S., & Rosen, R. (2016) · Mechatronic Futures · doi:10.1007/978-3-319-32156-1_5 · Cited by 1,158 · cited 1×
“Digital data and artificial intelligence allow the dematerialization and the coexistence of the real factory with digital twins [8], where manufacturing processes are virtually simulated, monitored, and controlled.”
BackgroundReview of digital twin applications in manufacturing
Cimino, C., Negri, E., & Fumagalli, L. (2019) · Computers in Industry · doi:10.1016/j.compind.2019.103130 · Cited by 874 · cited 1×
“A digital twin not only allows a static perspective at design stage, but also a real-time synchronization and optimization of the virtual object [13].”
BackgroundPérez, L., Rodríguez-Jiménez, S., Rodríguez, N., Usamentiaga, R., García, D. F., & Wang, L. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-04638-6 · Cited by 80 · cited 2×
“Robots are perfect substitutes for a skilled workforce for some repeatable, general, and strategically-important tasks, but this substitution is not straightforward [5].”
BackgroundSelf-citation
Cited by
Digital twins-based smart manufacturing system design in Industry 4.0: A review
Leng, J., Wang, D., Shen, W., Li, X., Liu, Q., & Chen, X. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2021.05.011 · Cited by 766
Digital Twin applications toward Industry 4.0: A Review
Javaid, M., Haleem, A., & Suman, R. (2023) · Cognitive Robotics · doi:10.1016/j.cogr.2023.04.003 · Cited by 421
A survey on AI-driven digital twins in Industry 4.0: smart manufacturing and advanced robotics
Huang, Z., Shen, Y., Li, J., Fey, M., & Brecher, C. (2021) · Sensors · doi:10.3390/s21196340 · Cited by 418
Shen, B., Tan, W., Guo, J., Zhao, L., & Qin, P. (2021) · Applied Sciences · doi:10.3390/app112311087 · Cited by 368
Lv, Z. (2023) · Research · doi:10.34133/research.0071 · Cited by 108
Metadata
- Authors
- Pérez, L., Rodríguez-Jiménez, S., Rodríguez, N., Usamentiaga, R., & García, D. F.
- Venue
- Applied Sciences
- Publisher
- MDPI AG
- Published
- 2020-05-24
- Volume
- 10
- Issue
- 10
- Pages
- 3633
- ISSN
- 2076-3417 (ISSN-L)
- OpenAlex
- W3031534555
- Cited by
- 190
- References
- 7
- FWCI
- 15.82
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Digital Twin and Virtual Reality Based Methodology for Multi-Robot Manufacturing Cell Commissioning. https://app.cochat.ai/papers/10.3390/app10103633
- The paper
- Pérez, L., Rodríguez-Jiménez, S., Rodríguez, N., Usamentiaga, R., & García, D. F. (2020). Digital Twin and Virtual Reality Based Methodology for Multi-Robot Manufacturing Cell Commissioning. Applied Sciences. https://doi.org/10.3390/app10103633
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.