The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Electrochemical Biosensors Based on Conducting Polymers: A Review
Abstract
Conducting polymers are an important class of functional materials that has been widely applied to fabricate electrochemical biosensors, because of their interesting and tunable chemical, electrical, and structural properties. Conducting polymers can also be designed through chemical grafting of functional groups, nanostructured, or associated with other functional materials such as nanoparticles to provide tremendous improvements in sensitivity, selectivity, stability and reproducibility of the biosensor’s response to a variety of bioanalytes. Such biosensors are expected to play a growing and significant role in delivering the diagnostic information and therapy monitoring since they have advantages including their low cost and low detection limit. Therefore, this article starts with the description of electroanalytical methods (potentiometry, amperometry, conductometry, voltammetry, impedometry) used in electrochemical biosensors, and continues with a review of the recent advances in the application of conducting polymers in the recognition of bioanalytes leading to the development of enzyme based biosensors, immunosensors, DNA biosensors, and whole-cell biosensors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Synthesis of electrically conducting organic polymers: halogen derivatives of polyacetylene, (CH) x
Shirakawa, H., Louis, E. J., MacDiarmid, A. G., Chiang, C. K., & Heeger, A. J. (1977) · Journal of the Chemical Society, Chemical Communications · doi:10.1039/c39770000578 · Cited by 3,867
Conducting polymers in biomedical engineering
Guimard, N. K., Gomez, N., & Schmidt, C. E. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.05.012 · Cited by 1,599
Moliton, A., & Hiorns, R. C. (2004) · Polymer International · doi:10.1002/pi.1587 · Cited by 409
Research works printed but not linked: 148
- Diaz, 1981, Electrochemical preparation and characterisation of conducting polymers, Chem. Scr., 17, 145
- Diaz, A.F., and Kanazawa, K.K. (1979). Electrochemical polymerisation of pyrrole. J. Chem. Soc. Chem. Commun., 635. · DOI
- Kanazawa, K.K., Diaz, A.F., Geiss, R.H., Gill, W.D., Kwak, J.F., and Logan, J.A. (1979). ‘Organic metals’: Polypyrrole a stable synthetic ‘metallic’ polymer. J. Chem. Soc. Chem. Commun., 854. · doi:10.1039/c39790000854
- Le, T.H., Kim, Y., and Yoon, H. (2017). Electrical and Electrochemical Properties of Conducting Polymers. Polymers, 9. · DOI · Paper page
- Tsukamoto, 1992, Recent advances in highly conductive polyacetylene, Adv. Phys., 41, 509, 10.1080/00018739200101543 · DOI
- Tsukamoto, 1990, Structure and electrical properties of polyacetylene yielding a conductivity of 105 S/cm, Jpn. J. Appl. Phys., 29, 125, 10.1143/JJAP.29.125 · doi:10.1143/jjap.29.125
- Patois, 2010, Effect of various parameters on the conductivity of free standing electrosynthesized polypyrrole films, Synth. Met., 160, 2180, 10.1016/j.synthmet.2010.08.005 · doi:10.1016/j.synthmet.2010.08.005
- Zhang, 2009, Controllable molecular doping and charge transport in solution-processed polymer semiconducting layers, Adv. Funct. Mater., 19, 1901, 10.1002/adfm.200801761 · doi:10.1002/adfm.200801761
- Ahlskog, 1997, The temperature dependence of the conductivity in the critical regime of the metal-insulator transition in conducting polymers, J. Phys. Condens. Matter, 9, 4145, 10.1088/0953-8984/9/20/014 · DOI
- Aleshin, 1997, Metallic conductivity at low temperatures in poly (3,4-ethylenedioxythiophene) doped with PF6, Phys. Rev. B, 56, 3659, 10.1103/PhysRevB.56.3659 · doi:10.1103/physrevb.56.3659
- Lee, 2006, Metallic transport in polyaniline, Nature, 441, 65, 10.1038/nature04705 · DOI · Paper page
- Wataru, 2002, Cyclic step-voltammetric analysis of cation-driven and anion-driven actuation in polypyrrole films, Jpn. J. Appl. Phys., 41, 7532, 10.1143/JJAP.41.7532 · doi:10.1143/jjap.41.7532
- Paul, 1985, Resistance of polyaniline films as a function of electrochemical potential and the fabrication of polyaniline-based microelectronic devices, J. Phys. Chem., 89, 1441, 10.1021/j100254a028 · DOI · Paper page
- Wan, M. (2008). Conducting Polymers with Micro or Nanometer Structure, Springer.
- Li, Y. (2015). Conducting polymer. Organic Optoelectronic Materials, Springer International Publishing. · DOI
- Bredas, 1981, Theoretical Studies of Charged Defect States in Doped Polyacetylene and Polyparaphenylene, Mol. Cryst. Liq. Cryst., 77, 319, 10.1080/00268948108075251 · doi:10.1080/00268948108075251
- Scrosati, 1988, Electrochemical Properties of Conducting Polymers, Prog. Solid State Chem., 18, 1, 10.1016/0079-6786(88)90007-6 · doi:10.1016/0079-6786(88)90007-6
- Beaujuge, 2010, Color Control in π—Conjugated Organic Polymers for Use in Electrochromic Devices, Chem. Rev., 110, 268, 10.1021/cr900129a · DOI · Paper page
- Bharti, 2018, Conductive Polymers for Thermoelectric Power Generation, Prog. Mater. Sci., 93, 270, 10.1016/j.pmatsci.2017.09.004 · DOI · Paper page
- Fan, 2019, Thermoelectric Properties of PEDOT: PSS, Adv. Electron. Mater., 5, 1800769, 10.1002/aelm.201800769 · DOI · Paper page
- Guerfi, 2014, High cycling stability of zinc-anode/conducting polymer rechargeable battery with non-aqueous electrolyte, J. Power Sources, 248, 1099, 10.1016/j.jpowsour.2013.09.082 · doi:10.1016/j.jpowsour.2013.09.082
- Katz, 2010, Batteries and Charge Storage Devices Based on Electronically Conducting Polymers, J. Mater. Res., 25, 1561, 10.1557/JMR.2010.0201 · doi:10.1557/jmr.2010.0201
- Ehsani, 2017, High performance electrochemical pseudocapacitors from ionic liquid assisted electrochemically synthesized p-type conductive polymer, J. Colloid Interface Sci., 490, 91, 10.1016/j.jcis.2016.11.024 · DOI
- Kao, 2011, Conducting-polymer-based supercapacitor devices and electrodes, J. Power Sources, 196, 1, 10.1016/j.jpowsour.2010.06.084 · DOI · Paper page
- Lee, 2016, Long-Term Stable Recombination Layer for Tandem Polymer Solar Cells Using Self-Doped Conducting Polymers, ACS Appl. Mater. Interfaces, 8, 6144, 10.1021/acsami.5b11742 · doi:10.1021/acsami.5b11742
- Mengistie, 2014, Highly conductive PEDOT: PSS treated with formic acid for ITO-free polymer solar cells, ACS Appl. Mater. Interfaces, 6, 2292, 10.1021/am405024d · DOI · Paper page
- Zhang, 2019, Electrochemically polymerized poly (3, 4-phenylenedioxythiophene) as efficient and transparent counter electrode for dye sensitized solar cells, Electrochim. Acta, 300, 482, 10.1016/j.electacta.2019.01.006 · DOI
- Boudreault, 2011, Processable Low-Bandgap Polymers for Photovoltaic Applications, Chem. Mater., 23, 456, 10.1021/cm1021855 · DOI · Paper page
- Kim, 2013, Achieving high efficiency and improved stability in ITO free transparent organic light-emitting diodes with conductive polymer electrodes, Adv. Funct. Mater., 23, 3763, 10.1002/adfm.201203449 · DOI
- Bhuvana, 2018, Polymer Light Emitting Diodes: Materials, Technology and Device, Polym. Plast. Technol. Eng., 57, 1784, 10.1080/03602559.2017.1422269 · doi:10.1080/03602559.2017.1422269
- Dutta, 2015, Enhancements of Catalyst Distribution and Functioning Upon Utilization of Conducting Polymers as Supporting Matrices in DMFCs: A Review, Polym. Rev., 55, 1, 10.1080/15583724.2014.958771 · DOI
- Baldissera, 2010, Electrochemical impedance spectroscopy investigation of chlorinated rubber-based coatings containing polyaniline as anticorrosion agent, Mater. Corros., 61, 790, 10.1002/maco.200905254 · doi:10.1002/maco.200905254
- Deshpande, 2014, Conducting polymers for corrosion protection: A review, J. Coat. Techn. Res., 11, 473, 10.1007/s11998-014-9586-7 · DOI · Paper page
- Soganci, 2018, Synthesis of highly branched conducting polymer architecture for electrochromic applications, Polymer, 134, 187, 10.1016/j.polymer.2017.11.067 · doi:10.1016/j.polymer.2017.11.067
- Topart, 2001, Wide band electrochromic displays based on thin conducting polymer films, Electrochim. Acta, 46, 2137, 10.1016/S0013-4686(01)00392-9 · doi:10.1016/s0013-4686(01)00392-9
- Barnes, 1998, Towards a ‘smart window’ for microwave applications, Smart Mater. Struct., 7, 752, 10.1088/0964-1726/7/6/003 · doi:10.1088/0964-1726/7/6/003
- Barus, 2018, Effect of Chemical Treatment on Conducting Polymer for Flexible Smart Window Application, J. Phys. Conf. Ser., 1116, 032006, 10.1088/1742-6596/1116/3/032006 · doi:10.1088/1742-6596/1116/3/032006
- Wang, 2017, CVD Polymers for Devices and Device Fabrication, Adv. Mater., 29, 1604606, 10.1002/adma.201604606 · doi:10.1002/adma.201604606
- Park, C.S., Kim, D.H., Shin, B.J., and Tae, H.S. (2016). Synthesis and Characterization of Nanofibrous Polyaniline Thin Film Prepared by Novel Atmospheric Pressure Plasma Polymerization Technique. Materials, 9. · doi:10.3390/ma9010039
- Liu, 2017, Plasma polymerization of poly (3,4-ethylenedioxyethene) films: The influence of plasma gas phase chemistry, J. Vac. Sci. Technol. A, 35, 021302, 10.1116/1.4968017 · doi:10.1116/1.4968017
- Loewe, 2001, Regioregular, Head-to-Tail Coupled Poly(3-Alkylthiophenes) Made Easy by the GRIM Method: Investigation of the Reaction and the Origin of Regioselectivity, Macromolecules, 34, 4324, 10.1021/ma001677+ · DOI
- Tamba, 2013, Synthesis of High-Molecular-Weight Head-to-Tail-Type Poly(3-Substituted-Thiophene)s by Cross-Coupling Polycondensation with [CpNiCl(NHC)] as a Catalyst, Chem. Lett., 42, 281, 10.1246/cl.2013.281 · doi:10.1246/cl.2013.281
- Malinauskas, 2001, Chemical deposition of conducting polymers, Polymer, 42, 3957, 10.1016/S0032-3861(00)00800-4 · DOI · Paper page
- Erdem, 2004, The chemical synthesis of conductive polyaniline doped with dicarboxylic acids, Eur. Polym. J., 40, 785, 10.1016/j.eurpolymj.2003.12.007 · doi:10.1016/j.eurpolymj.2003.12.007
- Ramanavicius, 2005, Polypyrrole-coated glucose oxidase nanoparticles for biosensor design, Sens. Actuators B, 111, 532, 10.1016/j.snb.2005.03.038 · DOI
- Jha, 2011, Growth of Free-Standing Polypyrrole Nanosheets at Air/Liquid Interface Using J-Aggregate of Porphyrin Derivative as in-Situ Template, Macromolecules, 44, 4583, 10.1021/ma2002849 · doi:10.1021/ma2002849
- Heinze, 2010, Electrochemistry of Conducting Polymers—Persistent Models and New Concepts, Chem. Rev., 110, 4724, 10.1021/cr900226k · DOI · Paper page
- Park, Y., Jung, J., and Chang, M. (2019). Research Progress on Conducting Polymer-Based Biomedical Applications. Appl. Sci., 9. · DOI
- Nair, 2019, Recent progress in conductive polymeric materials for biomedical applications, Polym. Adv. Technol., 30, 2932, 10.1002/pat.4725 · DOI
- Geetha, 2006, Biosensing and drug delivery by polypyrrole, Anal. Chim. Acta, 568, 119, 10.1016/j.aca.2005.10.011 · doi:10.1016/j.aca.2005.10.011
- Boehler, 2019, Tuning drug delivery from conducting polymer films for accurately controlled release of charged molecules, J. Control. Release, 304, 173, 10.1016/j.jconrel.2019.05.017 · DOI
- Krukiewicz, 2016, EQCM verification of the concept of drug immobilization and release from conducting polymer matrix, Electrochim. Acta, 212, 694, 10.1016/j.electacta.2016.07.055 · DOI
- Guo, 2018, Conducting polymers for tissue engineering, Biomacromolecules, 19, 1764, 10.1021/acs.biomac.8b00276 · DOI · Paper page
- Dong, 2020, Conductive biomaterials for muscle tissue engineering, Biomaterials, 229, 119584, 10.1016/j.biomaterials.2019.119584 · DOI · Paper page
- Zarrintai, 2018, Oligoaniline-based conductive biomaterials for tissue engineering, Acta Biomater., 72, 16, 10.1016/j.actbio.2018.03.042 · DOI
- Inal, 2017, Conducting polymer scaffolds for hosting and monitoring 3D cell culture, Adv. Biosyst., 1, 1700052, 10.1002/adbi.201700052 · DOI
- Lakard, 2007, Synthesis of polymer materials for use as cell culture substrates, Electrochim. Acta, 53, 1114, 10.1016/j.electacta.2007.04.098 · DOI
- Ateh, 2006, Polypyrrole-based conducting polymers and interactions with biological tissues, J. R. Soc. Interface, 3, 741, 10.1098/rsif.2006.0141 · DOI · Paper page
- He, 2019, Biocompatible conductive polymers with high conductivity and high stretchability, ACS Appl. Mater. Interfaces, 11, 26185, 10.1021/acsami.9b07325 · DOI · Paper page
- Humpolicek, 2018, The biocompatibility of polyaniline and polypyrrole: A comparative study of their cytotoxicity, embryotoxicity and impurity profile, Mat. Sci. Eng. C, 91, 303, 10.1016/j.msec.2018.05.037 · DOI
- Humpolicek, 2012, Biocompatibility of polyaniline, Synth. Met., 162, 722, 10.1016/j.synthmet.2012.02.024 · DOI · Paper page
- George, 2005, Fabrication and biocompatibility of polypyrrole implants suitable for neural prosthetics, Biomaterials, 26, 3511, 10.1016/j.biomaterials.2004.09.037 · DOI · Paper page
- Kim, 2016, Disposable all-solid-state pH and glucose sensors based on conductivepolymer covered hierarchical AuZn oxide, Biosens. Bioelectron., 79, 165, 10.1016/j.bios.2015.12.002 · DOI
- Tuncagil, 2011, Gold nanoparticle modified conducting polymer of 4-(2,5-di(thiophen-2-yl)-1H-pyrrole-1-l) benzenamine for potential use as a biosensing material, Food Chem., 127, 1317, 10.1016/j.foodchem.2011.01.089 · doi:10.1016/j.foodchem.2011.01.089
- Glumbokaite, 2018, An Amperometric Glucose Biosensor Based on Poly (Pyrrole-2-Carboxylic Acid)/Glucose Oxidase Biocomposite, Electroanalysis, 30, 1642, 10.1002/elan.201800044 · DOI
- Gaikwad, 2006, Immobilization of GOD on electrochemically synthesized PANI film by cross-linking via glutaraldehyde for determination of glucose, Int. J. Electrochem. Sci., 1, 425, 10.1016/S1452-3981(23)17170-7 · doi:10.1016/s1452-3981(23)17170-7
- Lakard, 2004, Urea potentiometric biosensor based on modified electrodes with urease immobilized on polyethylenimine films, Biosens. Bioelectron., 19, 1641, 10.1016/j.bios.2003.12.035 · DOI
- Magnin, 2008, Functionalization of Magnetic Nanowires by Charged Biopolymers, Biomacromolecules, 9, 2517, 10.1021/bm8005402 · doi:10.1021/bm8005402
- Xue, 2001, Polyaniline-polyisoprene composite film based glucose biosensor with high permselectivity, Synth. Met., 124, 345, 10.1016/S0379-6779(01)00381-2 · doi:10.1016/s0379-6779(01)00381-2
- Molino, 2012, Fibronectin and bovine serum albumin adsorption and conformational dynamics on inherently conducting polymers: A QCM-D study, Langmuir, 28, 8433, 10.1021/la300692y · DOI · Paper page
- Lakard, 2011, Urea potentiometric enzymatic biosensor based on charged biopolymers and electrodeposited polyaniline, Biosens. Bioelectron., 26, 4139, 10.1016/j.bios.2011.04.009 · doi:10.1016/j.bios.2011.04.009
- Yang, 2014, High performance conducting polymer nanofiber biosensors for detection of biomolecules, Adv. Mater., 26, 4954, 10.1002/adma.201400753 · DOI
- Soares, 2012, Amperometric urea biosensors based on the entrapment of urease in polypyrrole films, React. Funct. Polym., 72, 148, 10.1016/j.reactfunctpolym.2011.12.002 · doi:10.1016/j.reactfunctpolym.2011.12.002
- Minett, 2002, Immobilisation of anti-Listeria in a polypyrrole film, React. Funct. Polym., 53, 217, 10.1016/S1381-5148(02)00175-X · DOI
- Mandli, 2018, Impedimetric genosensor for miRNA-34a detection in cell lysates using polypyrrole, J. Solid State Electrochem., 22, 1007, 10.1007/s10008-017-3819-5 · DOI
- Ramanavicius, 2006, Electrochemical sensors based on conducting polymer- polypyrrole, Electrochim. Acta, 51, 6025, 10.1016/j.electacta.2005.11.052 · doi:10.1016/j.electacta.2005.11.052
- Adeloju, 2001, Fabrication of ultra-thin polypyrrole–glucose oxidase film from supporting electrolyte-free monomer solution for potentiometric biosensing of glucose, Biosens. Bioelectron., 16, 133, 10.1016/S0956-5663(00)00117-2 · DOI
- Leite, 2017, Use of sinusoidal voltages with fixed frequency in the preparation of tyrosinase based electrochemical biosensors for dopamineelectroanalysis, Sens. Actuators B, 240, 801, 10.1016/j.snb.2016.09.045 · DOI
- Clark, 1956, Monitor and control of blood and tissue oxygen tensions, Trans. Am. Soc. Artif. Intern. Organs, 2, 41
- Forzani, 2004, A Conducting Polymer Nanojunction Sensor for Glucose Detection, Nano Lett., 4, 1785, 10.1021/nl049080l · DOI · Paper page
- Chauhan, 2017, An electrochemical sensor for detection of neurotransmitter-acetylcholine using metal nanoparticles, 2D material and conducting polymer modified electrode, Biosens. Bioelectron., 89, 377, 10.1016/j.bios.2016.06.047 · DOI · Paper page
- Uwaya, 2020, Electrochemical detection of serotonin in banana at green mediated PPy/Fe3O4 NPs nanocomposites modified electrodes, Sens. Bio Sens. Res., 28, 100338, 10.1016/j.sbsr.2020.100338 · DOI
- Hamid, 2018, Electrochemical Preparation and Electrical Characterization of Polyaniline as a Sensitive Biosensor, Microsyst. Technol., 24, 1775, 10.1007/s00542-018-3793-6 · doi:10.1007/s00542-018-3793-6
- Bahadir, 2016, A review on impedimetric biosensors, Artif. Cells Nanomed Biotechn., 44, 248, 10.3109/21691401.2014.942456 · DOI · Paper page
- He, S., Yuan, Y., Nag, A., Feng, S., Afsarimanesh, N., Han, T., Mukhopadhyay, S.C., and Organ, D.R. (2020). A Review on the Use of Impedimetric Sensors for the Inspection of Food Quality. Int. J. Environ. Res. Public Health, 17. · DOI
- Peyman, 2020, A review on impedimetric immunosensors for pathogen and biomarker detection, Med. Microbiol. Immunol., 209, 343, 10.1007/s00430-020-00668-0 · DOI · Paper page
- Grant, 2005, Label-free and reversible immunosensor based upon an ac impedance interrogation protocol, Anal. Chim. Acta, 537, 163, 10.1016/j.aca.2005.01.003 · DOI
- Aydin, 2018, Highly sensitive electrochemical immunosensor based on polythiophene polymer with densely populated carboxyl groups as immobilization matrix for detection of interleukin 1β in human serum and saliva, Sens. Actuators B, 270, 18, 10.1016/j.snb.2018.05.014 · DOI
- Taleat, 2013, CA 125 Immunosensor Based on Poly-Anthranilic Acid Modified Screen-Printed Electrodes, Electroanalysis, 25, 269, 10.1002/elan.201200425 · DOI
- Jugovic, 2016, Polypyrrole-based Enzyme Electrode with Immobilized Glucose Oxidase for Electrochemical Determination of Glucose, Int. J. Electrochem. Sci., 11, 1152, 10.1016/S1452-3981(23)15912-8 · DOI
- Gvozdenovic, 2011, Electrochemical determination of glucose using polyaniline electrode modified by glucose oxidase, Food Chem., 124, 396, 10.1016/j.foodchem.2010.06.046 · doi:10.1016/j.foodchem.2010.06.046
- Lai, 2016, Polyaniline-based glucose biosensor: A review, J. Electroanal. Chem., 782, 138, 10.1016/j.jelechem.2016.10.033 · DOI · Paper page
- Singh, 2009, Polypyrrole based amperometric glucose biosensors, Sens. Actuators B, 143, 430, 10.1016/j.snb.2009.09.005 · doi:10.1016/j.snb.2009.09.005
- Lau, 2003, Disposable glucose sensors for flow injection analysis using substituted 1,4-benzoquinonemediators, Electroanalysis, 15, 975, 10.1002/elan.200390118 · doi:10.1002/elan.200390118
- Qiu, 2009, Amperometric sensor based on ferrocene-modified multiwalled carbon nanotube nanocomposites as electron mediator for the determination of glucose, Anal. Biochem., 385, 264, 10.1016/j.ab.2008.12.002 · doi:10.1016/j.ab.2008.12.002
- Jian, 2011, An amperometric glucose biosensor based on a screen-printed electrode and Os-complex mediator for flow injection analysis, Measurement, 44, 1878, 10.1016/j.measurement.2011.09.001 · doi:10.1016/j.measurement.2011.09.001
- Shrestha, 2016, High-performance glucose biosensor based on chitosane-glucose oxidase immobilized polypyrrole/Nafion/functionalized multi-walled carbon nanotubes bio-nanohybrid film, J. Colloid Interf. Sci., 482, 39, 10.1016/j.jcis.2016.07.067 · DOI
- Shrestha, 2017, Globular Shaped Polypyrrole Doped Well-Dispersed Functionalized Multiwall Carbon Nanotubes/Nafion Composite for Enzymatic Glucose Biosensor Application, Sci. Rep., 7, 16191, 10.1038/s41598-017-16541-9 · DOI
- Chen, 2012, Glucose biosensor based on three dimensional ordered macroporous self-doped polyaniline/Prussian blue bicomponent film, Anal. Chim. Acta, 723, 94, 10.1016/j.aca.2012.02.032 · DOI
- Chowdhury, 2014, Highly sensitive electrochemical biosensor for glucose, DNA and protein using gold-polyaniline nanocomposites as a common matrix, Sens. Actuators B, 190, 348, 10.1016/j.snb.2013.08.071 · DOI
- Mazeiko, 2013, Gold Nanoparticle and Conducting Polymer—Polyaniline—Based Nanocomposites for Glucose Biosensor Design, Sens. Actuators B, 189, 187, 10.1016/j.snb.2013.03.140 · DOI
- Zhai, 2013, Highly sensitive glucose sensor based on Pt nanoparticle/polyaniline hydrogel heterostructures, ACS Nano, 7, 3540, 10.1021/nn400482d · DOI · Paper page
- Zhong, 2011, In situ chemo-synthesized multi-wall carbon nanotube-conductive polyaniline nanocomposites: Characterization and application for a glucose amperometric biosensor, Talanta, 85, 104, 10.1016/j.talanta.2011.03.040 · DOI
- Jimenez-Fierrez, F., Gonzalez-Sanchez, M.I., Jimenez-Perez, R., Iniesta, J., and Valero, E. (2020). Glucose Biosensor Based on Disposable Activated Carbon Electrodes Modified with Platinum Nanoparticles Electrodeposited on Poly(Azure A). Sensors, 20. · DOI
- Djaalab, E., El Hadi Samar, M., Zougar, S., and Kherrat, R. (2018). Electrochemical Biosensor for the Determination of Amlodipine Besylate Based on Gelatin-Polyaniline Iron Oxide Biocomposite Film. Catalysts, 8. · doi:10.3390/catal8060233
- Zhuang, 2016, One-step electrochemical fabrication of a nickel oxide nanoparticle/polyaniline nanowire/graphene oxide hybrid on a glassy carbon electrode for use as a non-enzymatic glucose biosensor, RSC Adv., 6, 92541, 10.1039/C6RA14970G · doi:10.1039/c6ra14970g
- Wang, 2009, Detection of Glucose Based on Direct Electron Transfer Reaction of Glucose Oxidase Immobilized on Highly Ordered Polyaniline Nanotubes, Anal. Chem., 81, 1638, 10.1021/ac802421h · DOI · Paper page
- Xu, 2012, Modification of polypyrrole nanowires array with platinum nanoparticles and glucose oxidase for fabrication of a novel glucose biosensor, Anal. Chim. Acta, 755, 100, 10.1016/j.aca.2012.09.037 · doi:10.1016/j.aca.2012.09.037
- Komathi, 2017, Polyaniline nanoflowers grafted onto nanodiamonds via a soft template-guided secondary nucleation process for high-performance glucose sensing, RSC Adv., 7, 15342, 10.1039/C6RA24760A · DOI
- Ramanavicius, 1999, Polypyrrole-Entrapped Quinohemoprotein Alcohol Dehydrogenase. Evidence for Direct Electron Transfer via Conducting-Polymer Chains, Anal. Chem., 71, 3581, 10.1021/ac981201c · DOI
- Bollela, P., Gorton, L., and Antiochia, R. (2018). Direct Electron Transfer of Dehydrogenases for Development of 3rd Generation Biosensors and Enzymatic Fuel Cells. Sensors, 18. · DOI
- Oztekin, 2011, Direct electron transfer from glucose oxidase immobilized on polyphenanthroline-modified glassy carbon electrode, Biosens. Bioelectron., 26, 2541, 10.1016/j.bios.2010.11.001 · doi:10.1016/j.bios.2010.11.001
- Bagdziunas, G., and Palinauskas, D. (2020). Poly (9H-carbazole) as a Organic Semiconductor for Enzymatic and Non-Enzymatic Glucose Sensors. Biosensors, 10. · doi:10.3390/bios10090104
- Grennan, 2003, Atrazine analysis using an amperometric immunosensor based on single-chain antibody fragments and regeneration-free multi-calibrant measurement, Anal. Chim. Acta, 500, 287, 10.1016/S0003-2670(03)00942-5 · DOI
- Darain, 2004, Development of an immunosensor for the detection of vitellogenin using impedance spectroscopy, Biosens. Bioelectron., 19, 1245, 10.1016/j.bios.2003.11.014 · doi:10.1016/j.bios.2003.11.014
- Wang, 2018, A cascade reaction signal-amplified amperometric immunosensor platform for ultrasensitive detection of tumour marker, Sens. Actuators B, 254, 642, 10.1016/j.snb.2017.07.135 · DOI
- Zhao, 2018, Facile Synthesis of Polyaniline-Polythionine Redox Hydrogel: Conductive, Antifouling and Enzyme-Linked Material for Ultrasensitive Label-Free Amperometric Immunosensor toward Carcinoma Antigen-125, Anal. Chim. Acta, 997, 60, 10.1016/j.aca.2017.10.017 · DOI
- Shaikh, M.O., Srikanth, B., Zhu, P.Y., and Chuang, C.H. (2019). Impedimetric Immunosensor Utilizing Polyaniline/Gold Nanocomposite-Modified Screen-Printed Electrodes for Early Detection of Chronic Kidney Disease. Sensors, 19. · DOI
- Liu, 2018, Enhanced Electrochemical Biosensing of Alpha-Fetoprotein Based on Three-Dimensional Macroporous Conducting Polymer Polyaniline, Sens. Actuators B, 255, 2568, 10.1016/j.snb.2017.09.062 · doi:10.1016/j.snb.2017.09.062
- Dutta, 2018, Development of an effective electrochemical platform for highly sensitive DNA detection using MoS2—polyaniline nanocomposites, Biochem. Eng. J., 140, 130, 10.1016/j.bej.2018.09.016 · DOI
- Eguiluz, 2009, Sequence-specific electrochemical detection of Alicyclobacillus acidoterrestris DNA using electroconductive polymer-modified fluorine tin oxide electrodes, Analyst, 134, 314, 10.1039/B809080G · doi:10.1039/b809080g
- Tlili, 2008, Direct electrochemical probing of DNA hybridization on oligonucleotide-functionalized polypyrrole, Mater. Sci. Eng. C, 28, 848, 10.1016/j.msec.2007.10.061 · doi:10.1016/j.msec.2007.10.061
- Wilson, 2012, Polypyrrole-polyaniline-Au (PPy-PANi-Au) nano composite films for label-free electrochemical DNA sensing, Sens. Actuators B, 171, 216, 10.1016/j.snb.2012.03.019 · doi:10.1016/j.snb.2012.03.019
- Radhakrishnan, 2013, Polypyrrole-poly (3,4-ethylenedioxythiophene)-Ag (PPy-PEDOT-Ag) nanocomposite films for label-free electrochemical DNA sensing, Biosens. Bioelectron., 47, 133, 10.1016/j.bios.2013.02.049 · doi:10.1016/j.bios.2013.02.049
- Xu, 2006, Impedance DNA biosensor using electropolymerized polypyrrole/multiwalled carbon nanotubes modified electrode, Electroanalysis, 18, 1471, 10.1002/elan.200603544 · DOI
- Chang, 2007, Electrochemical DNA biosensor based on conducting polyaniline nanotube Array, Anal. Chem., 79, 5111, 10.1021/ac070639m · doi:10.1021/ac070639m
- Zhu, 2006, Electrochemically fabricated polyaniline nanowire-modified electrode for voltammetric detection of DNA hybridization, Electrochim. Acta, 51, 3758, 10.1016/j.electacta.2005.10.038 · DOI
- Du, 2012, Fabrication of DNA/graphene/polyaniline nanocomplex for label-free voltammetric detection of DNA hybridization, Talanta, 88, 439, 10.1016/j.talanta.2011.10.054 · DOI
- Mohamad, F.S., Zaid, M.H.M., Abdullah, J., Zawawi, R.M., Lim, H.N., Sulaiman, Y., and Rahman, N.A. (2017). Synthesis and Characterization of Polyaniline/Graphene Composite Nanofiber and Its Application as an Electrochemical DNA Biosensor for the Detection of Mycobacterium tuberculosis. Sensors, 17. · doi:10.3390/s17122789
- Ding, 2008, Trends in Cell-Based Electrochemical Biosensors, Curr. Med. Chem., 15, 3160, 10.2174/092986708786848514 · DOI
- Wei, 2017, Directing Stem Cell Differentiation via Electrochemical Reversible Switching between Nanotubes and Nanotips of Polypyrrole Array, ACS Nano, 11, 5915, 10.1021/acsnano.7b01661 · DOI
- Lakard, 2009, Effect of ultrasounds on the electrochemical synthesis of polypyrrole. Application to the adhesion and growth of biological cells, Bioelectrochemistry, 75, 148, 10.1016/j.bioelechem.2009.03.010 · DOI
- Yea, 2009, Ultrathin polyaniline film coated on an indium-tin oxide cell-based chip for study of anticancer effect, Thin Solid Film, 518, 661, 10.1016/j.tsf.2009.07.062 · doi:10.1016/j.tsf.2009.07.062
- Lee, 2009, Neuroactive conducting scaffolds: Nerve growth factor conjugation on active ester-functionalized polypyrrole, J. R. Soc. Interface, 6, 801, 10.1098/rsif.2008.0403 · DOI
- Chen, 2006, Vertically Aligned Carbon Nanofiber Arrays: An Advance toward Electrical-Neural Interfaces, Small, 2, 89, 10.1002/smll.200500175 · DOI · Paper page
- Yea, 2010, Analysis of effect of nanoporous alumina substrate coated with polypyrrole nanowire on cell morphology based on AFM topography, Ultramicroscopy, 110, 676, 10.1016/j.ultramic.2010.02.031 · doi:10.1016/j.ultramic.2010.02.031
- Apetrei, 2017, Glucose biosensor based on whole cells of Aspergillus niger MIUG 34 coated with polypyrrole, J. Biotechnol., 256, S55, 10.1016/j.jbiotec.2017.06.987 · doi:10.1016/j.jbiotec.2017.06.987
- Cevik, 2019, Electrochemical Glucose Biosensors: Whole Cell Microbial and Enzymatic Determination based on 10-(4H-dithiyeno [3,2-b:2′,3′-d]pyroll-4-il) decan-1-amine Interfaces Glassy Carbon Electrodes, Anal. Lett., 52, 1138, 10.1080/00032719.2018.1521828 · DOI
- Baskurt, 2012, A conducting polymer with benzothiadiazole unit: Cell based biosensing applications and adhesion properties, Colloids Surf. B, 97, 13, 10.1016/j.colsurfb.2012.04.005 · doi:10.1016/j.colsurfb.2012.04.005
- Guler, 2014, A novel functional conducting polymer as an immobilization platform, Mat. Sci. Eng. C, 40, 148, 10.1016/j.msec.2014.03.063 · doi:10.1016/j.msec.2014.03.063
- Tuncagil, 2009, Design of a microbial sensor using conducting polymer of 4-(2,5-di(thiophen-2-yl)-1H-pyrrole-1-l) benzenamine, Sens. Actuators B, 137, 42, 10.1016/j.snb.2008.10.067 · doi:10.1016/j.snb.2008.10.067
- Jha, 2009, Entrapment of live microbial cells in electropolymerized polyaniline and their use as urea biosensor, Biosens. Bioelectron., 24, 2637, 10.1016/j.bios.2009.01.024 · DOI
- Ratautaite, 2015, Characterization of caffeine-imprinted polypyrrole by a quartz crystalmicrobalance and electrochemical impedance spectroscopy, Sens. Actuators B, 212, 63, 10.1016/j.snb.2015.01.109 · doi:10.1016/j.snb.2015.01.109
- Xing, 2012, Electrochemical sensor based on molecularly imprinted film at polypyrrole-sulfonated graphene/hyaluronic acid-multiwalled carbon nanotubes modified electrode for determination of tryptamine, Biosens. Bioelectron., 31, 277, 10.1016/j.bios.2011.10.032 · DOI · Paper page
- Zhou, 2012, A multiporous electrochemical sensor for epinephrine recognition and detection based on molecularly imprinted polypyrrole, RSC Advances, 2, 7803, 10.1039/c2ra20787g · DOI
- Radi, 2014, Determination of coccidiostat clopidol on an electropolymerized-molecularly imprinted polypyrrole polymer modified screen printed carbon electrode, Anal. Methods, 6, 7967, 10.1039/C4AY01320D · doi:10.1039/c4ay01320d
- Lai, 2019, A novel alpha-fetoprotein-MIP immunosensor based on AuNPs/PTh modified glass carbon electrode, Chin. Chem. Lett., 30, 160, 10.1016/j.cclet.2018.07.011 · DOI
- Karami, 2019, Dual-modality impedimetric immunosensor for early detection of prostate-specific antigen and myoglobin markers based on antibody-molecularly imprinted polymer, Talanta, 202, 111, 10.1016/j.talanta.2019.04.061 · doi:10.1016/j.talanta.2019.04.061
Cited by
Tajik, S., Beitollahi, H., Nejad, F. G., Dourandish, Z., Khalilzadeh, M. A., Jang, H. W., Venditti, R. A., Varma, R. S., & Shokouhimehr, M. (2021) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c04952 · Cited by 294
Metadata
- Authors
- Lakard, B.
- Venue
- Applied Sciences
- Publisher
- MDPI AG
- Published
- 2020-09-22
- Volume
- 10
- Issue
- 18
- Pages
- 6614
- ISSN
- 2076-3417
- Cited by
- 203
- References
- 3
- Language
- en
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.