CoChat

The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index; none of the 26 sources its claims cite is checked for support yet.

Biomineralization Process Inspired In Situ Growth of Calcium Carbonate Nanocrystals in Chitosan Hydrogels

Open access
Zeng, Xinyue, Zhu, Zheng, Chang, Wei, Wu, Bin, Huang, Wei · 2024 · Applied Sciences

Abstract

Biological composites such as bone, nacre, and teeth show excellent mechanical efficiency because of the incorporation of biominerals into the organic matrix at the nanoscale, leading to hierarchical composite structures. Adding a large volume of ceramic nanoparticles into an organic molecular network uniformly has been a challenge in engineering applications. However, in natural organisms, biominerals grow inside organic fibers, such as chitin and collagen, forming perfect ceramic/polymer composites spontaneously via biomineralization processes. Inspired from these processes, the in situ growth of calcium carbonate nanoparticles inside the chitosan network to form ceramic composites was proposed in the current work. The crystal growth of CaCO3 nanoparticles in the chitosan matrix as a function of time was investigated. A weight percentage of ~35 wt% CaCO3 composite was realized, resembling the high weight percentage of mineral phase in bones. Scanning and transmission electron microscopy indicated the integration of CaCO3 nanocrystals with chitosan macromolecules. By growing CaCO3 minerals inside the chitosan matrix, the elastic modulus and tensile strength increases by ~110% and ~90%, respectively. The in situ crystal growth strategy was also demonstrated in organic frameworks prepared via 3D printing, indicating the potential of fabricating ceramic/polymer composites with complicated structures, and further applications in tissue engineering.

Overview

CoChat Summary

TL;DR

The paper reports in situ growth of CaCO₃ nanocrystals inside 3D-printed chitosan hydrogels via sequential Ca²⁺ and CO₃²⁻ diffusion, mimicking biomineralization. Mineralization for 1 h gave the best tensile properties, with ~110% higher Young’s modulus and ~90% higher tensile strength than the unmineralized hydrogel.

Key findings

  • CaCO₃ formed as calcite within the chitosan matrix: XRD matched the calcite standard pattern, Raman showed a carbonate peak near 1084 cm⁻¹, FTIR showed carbonate peaks near 1373, 870, and 710 cm⁻¹, and WAXD showed diffraction rings consistent with CaCO₃.
  • Crystal size depended on location and time: after 12 h, surface microcrystals averaged 5–6 µm, while cross-section nanoparticles averaged ~100 nm; after 3 h, most nanoparticles were 80–100 nm even in center areas, and 6 h results were similar to 3 h, indicating diffusion was no longer the main limiting mechanism.
  • TGA of the 12 h mineralized sample gave a final CaCO₃ mass fraction of approximately 13%, although the abstract states a ~35 wt% CaCO₃ composite was realized.
  • The 1 h mineralized sample showed the best mechanical properties: Young’s modulus increased by ~110% and tensile strength by ~90% versus pre-mineralized hydrogel. Table 1 reports 0 min: E = 5.59 ± 0.34 MPa, σ = 4.64 ± 0.50 MPa, strain = 73.64 ± 6.68%; 1 h: E = 11.68 ± 1.38 MPa, σ = 8.72 ± 2.90 MPa, strain = 68.05 ± 19.15%; longer mineralization reduced properties, e.g., 12 h: E = 6.96 ± 0.21 MPa, σ = 2.42 ± 0.54 MPa.

Methods

  • Chitosan hydrogel preparation: 8 wt% chitosan in 0.5 M acetic acid, degassed, 3D printed with a self-assembled extrusion printer at 3 mm/s using a 400 µm needle and 800 µm pitch, then neutralized in 1 M NaOH for 6 h and rinsed.
  • In situ mineralization: hydrogel immersed in 0.1 M CaCl₂ for 24 h, then in 0.1 M NaHCO₃ for 5 min to 12 h at room temperature, followed by rinsing.
  • Characterization and testing: SEM, TEM, XRD, Raman, FTIR, WAXD, and TGA; wet-state uniaxial tensile tests; diffusion analyzed with Fick’s second law simplified to a one-dimensional semi-infinite solid model.

Limitations

  • Stated: the next step is optimizing the mineralization process and adjusting conditions to more precisely regulate crystal growth; future work can explore materials beyond CaCO₃ and chitosan; the study was not applicable to humans or animals.
  • Evident: the abstract’s ~35 wt% CaCO₃ claim is not consistent with the TGA result of ~13% CaCO₃ mass fraction for the 12 h sample.
  • Evident: mechanical characterization is limited to wet-state uniaxial tensile tests, and no biological, cell, or in vivo validation is reported despite the tissue-engineering motivation; the diffusion analysis is simplified to a 1D semi-infinite model.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.3390/app14209193

Cites

42 of 42 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Figure 1 The design strategy, preparation process, and microstructural characteristics tosan/CaCO3 composites. ( a ) Schematic diagram illustrating the hierarchical structure of th skeleton. ( b ) Schematic representation of the compositional components of the mantis shri tyl club. ( c ) Preparation method of the chitosan/CaCO3 composite hydrogel and a schematic Figure 1. The design strategy, preparation process, and microstructural characteristics of chitosan/CaCO3 composites. ( a ) Schematic diagram illustrating the hierarchical structure of the natural skeleton. ( b ) Schematic representation of the compositional components of the mantis shrimp's dactyl club. ( c ) Preparation method of the chitosan/CaCO3 composite hydrogel and a schematic diagram of its structure.
Figure 1 The design strategy, preparation process, and microstructural characteristics tosan/CaCO3 composites. ( a ) Schematic diagram illustrating the hierarchical structure of th skeleton. ( b ) Schematic representation of the compositional components of the mantis shri tyl club. ( c ) Preparation method of the chitosan/CaCO3 composite hydrogel and a schematic Figure 1. The design strategy, preparation process, and microstructural characteristics of chitosan/CaCO3 composites. ( a ) Schematic diagram illustrating the hierarchical structure of the natural skeleton. ( b ) Schematic representation of the compositional components of the mantis shrimp's dactyl club. ( c ) Preparation method of the chitosan/CaCO3 composite hydrogel and a schematic diagram of its structure.CC-BY · From the PDF
Figure 2 Microstructures of chitosan hydrogel before and after mineralization. ( a ) Images printed pure chitosan hydrogel samples at their unmineralized state. ( b ) Images of chitosan/ composite hydrogel samples after 12 h of mineralization. ( c ) SEM images of the surface o chitosan hydrogel at its unmineralized state. ( d ) SEM image of the chitosan/CaCO3 compos drogel surface after 12 h of mineralization. ( e ) SEM images of the cross-section of unminer chitosan hydrogel. ( f ) SEM image of the cross-section of the chitosan/CaCO3 composite hy after 12 h of mineralization. Nanoparticles are noticed. Figure 2. Microstructures of chitosan hydrogel before and after mineralization. ( a ) Images of 3D printed pure chitosan hydrogel samples at their unmineralized state. ( b ) Images of chitosan/CaCO3 composite hydrogel samples after 12 h of mineralization. ( c ) SEM images of the surface of pure chitosan hydrogel at its unmineralized state. ( d ) SEM image of the chitosan/CaCO3 composite hydrogel surface after 12 h of mineralization. ( e ) SEM images of the cross-section of unmineralized chitosan hydrogel. ( f ) SEM image of the cross-section of the chitosan/CaCO3 composite hydrogel after 12 h of mineralization. Nanoparticles are noticed.
Figure 2 Microstructures of chitosan hydrogel before and after mineralization. ( a ) Images printed pure chitosan hydrogel samples at their unmineralized state. ( b ) Images of chitosan/ composite hydrogel samples after 12 h of mineralization. ( c ) SEM images of the surface o chitosan hydrogel at its unmineralized state. ( d ) SEM image of the chitosan/CaCO3 compos drogel surface after 12 h of mineralization. ( e ) SEM images of the cross-section of unminer chitosan hydrogel. ( f ) SEM image of the cross-section of the chitosan/CaCO3 composite hy after 12 h of mineralization. Nanoparticles are noticed. Figure 2. Microstructures of chitosan hydrogel before and after mineralization. ( a ) Images of 3D printed pure chitosan hydrogel samples at their unmineralized state. ( b ) Images of chitosan/CaCO3 composite hydrogel samples after 12 h of mineralization. ( c ) SEM images of the surface of pure chitosan hydrogel at its unmineralized state. ( d ) SEM image of the chitosan/CaCO3 composite hydrogel surface after 12 h of mineralization. ( e ) SEM images of the cross-section of unmineralized chitosan hydrogel. ( f ) SEM image of the cross-section of the chitosan/CaCO3 composite hydrogel after 12 h of mineralization. Nanoparticles are noticed.CC-BY · From the PDF
Figure 3 Cont .
Figure 3 Cont .CC-BY · From the PDF
Figure 3 Testing and analysis of chitosan/CaCO3 composite hydrogels. ( a ) XRD test cu chitosan/CaCO3 composite hydrogel. ( b ) TGA of chitosan/CaCO3 composite hydrogel. spectral profile of chitosan/CaCO3 composite hydrogels. ( d ) FTIR analysis of hydrogel b after mineralization. ( e ) WAXD diffractogram of unmineralized pure chitosan hydrogel. diffractogram of chitosan/CaCO3 composite hydrogel. Figure 3. Testing and analysis of chitosan/CaCO3 composite hydrogels. ( a ) XRD test curve of the chitosan/CaCO3 composite hydrogel. ( b ) TGA of chitosan/CaCO3 composite hydrogel. ( c ) Raman spectral profile of chitosan/CaCO3 composite hydrogels. ( d ) FTIR analysis of hydrogel before and after mineralization. ( e ) WAXD diffractogram of unmineralized pure chitosan hydrogel. ( f ) WAXD diffractogram of chitosan/CaCO3 composite hydrogel.
Figure 3 Testing and analysis of chitosan/CaCO3 composite hydrogels. ( a ) XRD test cu chitosan/CaCO3 composite hydrogel. ( b ) TGA of chitosan/CaCO3 composite hydrogel. spectral profile of chitosan/CaCO3 composite hydrogels. ( d ) FTIR analysis of hydrogel b after mineralization. ( e ) WAXD diffractogram of unmineralized pure chitosan hydrogel. diffractogram of chitosan/CaCO3 composite hydrogel. Figure 3. Testing and analysis of chitosan/CaCO3 composite hydrogels. ( a ) XRD test curve of the chitosan/CaCO3 composite hydrogel. ( b ) TGA of chitosan/CaCO3 composite hydrogel. ( c ) Raman spectral profile of chitosan/CaCO3 composite hydrogels. ( d ) FTIR analysis of hydrogel before and after mineralization. ( e ) WAXD diffractogram of unmineralized pure chitosan hydrogel. ( f ) WAXD diffractogram of chitosan/CaCO3 composite hydrogel.CC-BY · From the PDF
Figure 4 SEM images of chitosan/CaCO3 composite hydrogels after 5 min and 1 h mineralization. ( a -c ) show SEM images of the chitosan/CaCO3 composite hydrogel cross-sections after 5 min of mineralization, with ( b ) representing the area near the surface and ( c ) representing the area near the center. ( d -f ) show SEM images of the chitosan/CaCO3 composite hydrogel cross-sections after 1 h of mineralization, with ( e ) representing the area near the surface and ( f ) representing the area near Figure 4. SEM images of chitosan/CaCO3 composite hydrogels after 5 min and 1 h mineralization. ( a -c ) show SEM images of the chitosan/CaCO3 composite hydrogel cross-sections after 5 min of mineralization, with ( b ) representing the area near the surface and ( c ) representing the area near the center. ( d -f ) show SEM images of the chitosan/CaCO3 composite hydrogel cross-sections after 1 h of mineralization, with ( e ) representing the area near the surface and ( f ) representing the area near the center.
Figure 4 SEM images of chitosan/CaCO3 composite hydrogels after 5 min and 1 h mineralization. ( a -c ) show SEM images of the chitosan/CaCO3 composite hydrogel cross-sections after 5 min of mineralization, with ( b ) representing the area near the surface and ( c ) representing the area near the center. ( d -f ) show SEM images of the chitosan/CaCO3 composite hydrogel cross-sections after 1 h of mineralization, with ( e ) representing the area near the surface and ( f ) representing the area near Figure 4. SEM images of chitosan/CaCO3 composite hydrogels after 5 min and 1 h mineralization. ( a -c ) show SEM images of the chitosan/CaCO3 composite hydrogel cross-sections after 5 min of mineralization, with ( b ) representing the area near the surface and ( c ) representing the area near the center. ( d -f ) show SEM images of the chitosan/CaCO3 composite hydrogel cross-sections after 1 h of mineralization, with ( e ) representing the area near the surface and ( f ) representing the area near the center.CC-BY · From the PDF
Figure 5 SEM images of chitosan/CaCO3 composite hydrogel after 3 and 6 h mineralization. ( a -c ) depict the cross-sections after 3 h of mineralization, where ( b ) is near the surface and ( c ) is near the center. ( d -f ) present the cross-sections after 6 h of mineralization, with ( e ) representing the area near the surface and ( f ) representing the area near the center. Figure 5. SEM images of chitosan/CaCO3 composite hydrogel after 3 and 6 h mineralization. ( a -c ) depict the cross-sections after 3 h of mineralization, where ( b ) is near the surface and ( c ) is near the center. ( d -f ) present the cross-sections after 6 h of mineralization, with ( e ) representing the area near the surface and ( f ) representing the area near the center.
Figure 5 SEM images of chitosan/CaCO3 composite hydrogel after 3 and 6 h mineralization. ( a -c ) depict the cross-sections after 3 h of mineralization, where ( b ) is near the surface and ( c ) is near the center. ( d -f ) present the cross-sections after 6 h of mineralization, with ( e ) representing the area near the surface and ( f ) representing the area near the center. Figure 5. SEM images of chitosan/CaCO3 composite hydrogel after 3 and 6 h mineralization. ( a -c ) depict the cross-sections after 3 h of mineralization, where ( b ) is near the surface and ( c ) is near the center. ( d -f ) present the cross-sections after 6 h of mineralization, with ( e ) representing the area near the surface and ( f ) representing the area near the center.CC-BY · From the PDF
Figure 6 TEM images of chitosan/CaCO3 composite hydrogel. ( a , b ) TEM image of nanoparticles formed via in situ growth. ( c -f ) TEM images and diffraction pa tt erns of chitosan/CaCO3 composite hydrogel. Nanoparticles shows single crystal-like diffraction pa tt ern. Amorphous regions are noticed inside and on the edge of the calcite nanoparticles. ( g , h ) TEM images of the nanocomposite coating in mantis shrimp dactyl clubs, showing the combination of chitin macromolecules and hyFigure 6. TEM images of chitosan/CaCO3 composite hydrogel. ( a , b ) TEM image of nanoparticles formed via in situ growth. ( c -f ) TEM images and diffraction patterns of chitosan/CaCO3 composite hydrogel. Nanoparticles shows single crystal-like diffraction pattern. Amorphous regions are noticed inside and on the edge of the calcite nanoparticles. ( g , h ) TEM images of the nanocomposite coating in mantis shrimp dactyl clubs, showing the combination of chitin macromolecules and hydroxyapatite nanocrystals. Images are taken from [16] with permission.
Figure 6 TEM images of chitosan/CaCO3 composite hydrogel. ( a , b ) TEM image of nanoparticles formed via in situ growth. ( c -f ) TEM images and diffraction pa tt erns of chitosan/CaCO3 composite hydrogel. Nanoparticles shows single crystal-like diffraction pa tt ern. Amorphous regions are noticed inside and on the edge of the calcite nanoparticles. ( g , h ) TEM images of the nanocomposite coating in mantis shrimp dactyl clubs, showing the combination of chitin macromolecules and hyFigure 6. TEM images of chitosan/CaCO3 composite hydrogel. ( a , b ) TEM image of nanoparticles formed via in situ growth. ( c -f ) TEM images and diffraction patterns of chitosan/CaCO3 composite hydrogel. Nanoparticles shows single crystal-like diffraction pattern. Amorphous regions are noticed inside and on the edge of the calcite nanoparticles. ( g , h ) TEM images of the nanocomposite coating in mantis shrimp dactyl clubs, showing the combination of chitin macromolecules and hydroxyapatite nanocrystals. Images are taken from [16] with permission.CC-BY · From the PDF
Figure 7 Schematic of in situ growth of CaCO3 nanocrystals inside chitosan hydrogels via ble diffusion method. Calcium ions are diffused into the 3D-printed chitosan hydrogel first equilibrium is reached. Samples are then immersed in NaHCO3 solution. As the CO3 2 -is int calcite crystals start growing at the surface first. Microcrystals are formed on the surface, w Figure 7. Schematic of in situ growth of CaCO3 nanocrystals inside chitosan hydrogels via the double diffusion method. Calcium ions are diffused into the 3D-printed chitosan hydrogel first, until an equilibrium is reached. Samples are then immersed in NaHCO3 solution. As the CO3 2 -is introduced, calcite crystals start growing at the surface first. Microcrystals are formed on the surface, while crystal sizes are limited to ~100 nm inside the hydrogel due to the confinement of the chitosan molecular network.
Figure 7 Schematic of in situ growth of CaCO3 nanocrystals inside chitosan hydrogels via ble diffusion method. Calcium ions are diffused into the 3D-printed chitosan hydrogel first equilibrium is reached. Samples are then immersed in NaHCO3 solution. As the CO3 2 -is int calcite crystals start growing at the surface first. Microcrystals are formed on the surface, w Figure 7. Schematic of in situ growth of CaCO3 nanocrystals inside chitosan hydrogels via the double diffusion method. Calcium ions are diffused into the 3D-printed chitosan hydrogel first, until an equilibrium is reached. Samples are then immersed in NaHCO3 solution. As the CO3 2 -is introduced, calcite crystals start growing at the surface first. Microcrystals are formed on the surface, while crystal sizes are limited to ~100 nm inside the hydrogel due to the confinement of the chitosan molecular network.CC-BY · From the PDF
Figure 8 Stress-strain curve of chitosan/CaCO3 composite hydrogel at different mineralization times. Compared to the unmineralized chitosan films, mineralized films show an increase in both stiffness and tensile strength. Figure 8. Stress-strain curve of chitosan/CaCO3 composite hydrogel at different mineralization times. Compared to the unmineralized chitosan films, mineralized films show an increase in both stiffness and tensile strength.
Figure 8 Stress-strain curve of chitosan/CaCO3 composite hydrogel at different mineralization times. Compared to the unmineralized chitosan films, mineralized films show an increase in both stiffness and tensile strength. Figure 8. Stress-strain curve of chitosan/CaCO3 composite hydrogel at different mineralization times. Compared to the unmineralized chitosan films, mineralized films show an increase in both stiffness and tensile strength.CC-BY · From the PDF

Verification

Claims the paper makes

0 Valid · 0 Not valid · 14 Not checked · 97 Own results and interpretations

74 more claims

Create a free account to see all 111 claims and to verify the 26 references still open.

See all claims — free account
  • The quote only partly states this claim. 2
  • It may state two separate claims as one. 16
  • Probably not a substantial claim. 16

Create a free account to see these claims.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

1 of 1

Citations

Cites

Show all 42 references

Cited by

See all 11

Metadata

Authors
Zeng, X., Zhu, Z., Chang, W., Wu, B., & Huang, W.
Affiliations
State Key Laboratory of Materials Processing and Die & Mould Technology (CN)
Corresponding author
Huang, Wei
Venue
Applied Sciences
Publisher
MDPI AG
Published
2024-10-10
Volume
14
Issue
20
Pages
9193
ISSN
2076-3417 (ISSN-L)
OpenAlex
W4403301534
Cited by
11
References
42
Citations by year
2026: 8 · 2025: 3
FWCI
0.81
Type
journal article
Language
en
Open access
Locations
  • Applied Sciences (publishedVersion, cc-by)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • Rare & Special e-Zone (The Hong Kong University of Science and Technology) (submittedVersion)
Funders
  • National Natural Science Foundation Council of China (52305359, 2023AFB141)
  • Hubei Provincial Natural Science Foundation of China (52305359, 2023AFB141)
  • Huazhong University of Science and Technology (52305359, 2023AFB141)
Topics
  • Physical Sciences › Materials Science › Biomaterials › Calcium Carbonate Crystallization and Inhibition
  • Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
  • Physical Sciences › Environmental Science › Environmental Engineering › Microbial Applications in Construction Materials
Keywords
biomineralization, chitosan hydrogel, in situ crystal growth, polymer-ceramic composites, hierarchical composites, elastic modulus, tensile strength, tissue engineering, biomimetic materials

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

A language model drew the claims from the paper on 2026-11-18, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-11-18 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.