CoChat

An Intelligent Framework for Implementing AIAG–VDA FMEA and Action Priority (AP) Assessment

Open access
Oancea, Alexandru-Vasile, Ionescu, Laurențiu-Mihai, Rontescu, Corneliu, Ionescu, Nadia, Misztal, Agnieszka, Bogatu, Ana-Maria, Știrbu, Cosmin, Cicic, Dumitru-Titi, Stanciu, Elena-Manuela · 2026 · Applied Sciences

The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index; 6 of the 18 sources its claims cite were checked for support.

Abstract

The paper presents the Failure Mode and Effects Analysis (FMEA) method applied to a process-based case study, together with an approach for implementing the AIAG & VDA harmonized FMEA standard by using modern digital tools. While classical FMEA is widely used in the industry, risk assessment based on the Risk Priority Number (RPN) often leads to the inconsistent ranking of failures and unclear prioritization of corrective actions. This paper explores the shift from the traditional Risk Priority Number (RPN) approach to the Action Priority (AP) concept introduced in the AIAG & VDA FMEA Handbook and explains why this change leads to clearer, more consistent risk-based decisions. Rather than focusing only on the methodological differences, the paper also outlines a practical framework for full implementation, showing how Industry 4.0 technologies can strengthen traceability, improve response time, and ensure greater consistency in PFMEA development. It also examines how Artificial Intelligence (AI) and Large Language Models (LLMs) can support engineers in everyday practice—for example, by helping identify potential failure modes, standardizing documentation, and guiding the definition of prevention and detection controls. In parallel, IoT-based monitoring and real-time data collection can provide valuable feedback to validate occurrence and detection ratings. Over time, this data-driven feedback loop can improve the accuracy and reliability of risk assessments. The proposed framework contributes to improved responsiveness in process optimization activities, reduces the probability of recurring failures, and supports continuous quality improvement in manufacturing organizations. The solution is discussed in relation to classical FMEA practices and recent trends in the digital transformation of quality management systems.

Overview

CoChat Summary

TL;DR

The paper presents an AI/LLM-based framework for automating AIAG–VDA FMEA and Action Priority assessment, piloted on a 3D laser cutting process using a Prima Power Laser Next LN1530. Initial risk assessment classified 67% Low, 29% Medium, and 4% High risks; after corrective and preventive actions, all failure modes were reclassified as Low (100%).

Key findings

  • The most significant failure modes were missing holes and unsatisfactory cutting edge surface quality, with direct impact on assembly capability and customer acceptance.
  • Initial risk distribution was Low 67%, Medium 29%, and High 4%; High-priority cases were primarily associated with improper cutting parameter settings and inadequate base material conditions.
  • After optimization, all identified failure modes were classified as Low risk (L-100%), attributed to standardized cutting parameters, automated controls/poka-yoke, updated maintenance plans, and reinforced inspections.
  • The pilot automated solution handled 319 requests over 6 months: 98 Low (31%), 172 Medium (54%), and 49 High (15%); response time was max ~30 s versus previous ~5–10 min data collection, ~1–3 h analysis, and up to 24 h response generation. Cumulated total response time was 9570 s for full AI LLM pilot versus 4199 s with automated FMEA (AI LLM) pre-analysis.

Methods

  • Case study on 3D laser cutting of S235JRH steel rectangular hollow tube (60 × 40 × 4 mm) using a Prima Power Laser Next LN1530, following the AIAG & VDA FMEA (2019) seven-step framework.
  • A web-based pilot platform was developed with HTML/CSS/JS/Jinja frontend, Python 3.12 backend, JSON knowledge base, and ChatGPT/GPT-5.1 via OpenAI API; non-AI threshold pre-analysis classified Low risks, while Medium/High risks triggered LLM analysis.
  • S-O-D ratings were assigned per AIAG & VDA grids; AP thresholds used monthly internal nonconformities (0–5 parts/month ≤500 ppm Low; 6–20 parts/month 600–2000 ppm Medium; >20 parts/month >2000 ppm High), external nonconformities, customer complaints, and defect trend.

Limitations

  • Stated: the solution was implemented as a pilot for one specific production process (3D laser cutting) and can be extended to other manufacturing processes; future work includes completing the knowledge base and expanding the industrial domain.
  • Stated: the solution does not replace specialists or modify the risk evaluation methodology itself; AI responses are restricted to an expert-created knowledge base to reduce hallucinations.
  • Evident: the study is a single-case pilot with a small user group (six plus one receptionist), no control group or statistical validation, and results rely on expert review and operational implementation rather than independent replication.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.3390/app16052591

Cites

28 of 28 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Verification

Claims the paper makes

6 Valid · 10 Not valid · 7 Not checked · 73 Own results and interpretations

24 more claims

Create a free account to see all 96 claims and to verify the 1 reference still open.

See all claims — free account
  • Probably not a substantial claim. 47
  • It may state two separate claims as one. 40
  • The quote only partly states this claim. 3

Create a free account to see these claims.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

1 of 1

Citations

Cites

Show all 28 references

Research works printed but not linked: 4

  1. Barsalou, M. (2020, January 21–22). DFMEAs with the New AIAG/VDA FMEA Handbook. Proceedings of the 4th ICQEM Conference, Braga, Portugal.
  2. Anackovski, 2021, Action priority in new FMEA as factor for resources management in risk reduction, Int. J. Sci. Eng. Res., 12, 921
  3. 2018, Sensitivity analysis of FMEA as possible ranking method in risk prioritization, UPB Sci. Bull. Ser. D, 80, 55
  4. Pietreanu, 2018, Qualitative and Quantitative Assessment of Risks Associated to HELIOS HP 03-2 Unmanned Aerial Vehicle Developed by NASA, UPB Sci. Bull. Ser. D, 80, 39

Cited by

See all 1

Metadata

Authors
Oancea, A.-V., Ionescu, L.-M., Rontescu, C., Ionescu, N., Misztal, A., Bogatu, A.-M., Știrbu, C., Cicic, D.-T., & Stanciu, E.-M.
Affiliations
  • Universitatea Națională de Știință și Tehnologie Politehnica București (RO)
  • Faculty of Electronics, Communications and Computers, Pitești University Centre, National University of Science and Technology Politehnica Bucharest, 313 Spl. Independenței, 060042 Bucharest, Romania
  • Doctoral School, Faculty of Industrial Engineering and Robotic, National University of Science and Technology Politehnica Bucharest, 313 Spl. Independenței, 060042 Bucharest, Romania
  • Poznań University of Technology (PL)
  • Transilvania University of Brașov (RO)
Venue
Applied Sciences
Publisher
MDPI AG
Published
2026-03-09
Volume
16
Issue
5
Pages
2591
ISSN
2076-3417 (ISSN-L)
OpenAlex
W7134242580
Cited by
1
References
20
Citations by year
2026: 1
FWCI
5.98
Type
journal article
Language
en
Open access
Locations
  • Applied Sciences (publishedVersion, cc-by)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Topics
  • Social Sciences › Business, Management and Accounting › Strategy and Management › Management Systems and Quality Improvement
  • Social Sciences › Business, Management and Accounting › Strategy and Management › Management and Optimization Techniques
  • Physical Sciences › Engineering › Safety, Risk, Reliability and Quality › Reliability and Maintenance Optimization
Keywords
failure mode and effects analysis, action priorities, risk priority number, risk-based decision making, corrective action prioritization, Industry 4.0, large language models, artificial intelligence in engineering, IoT monitoring, real-time data acquisition, quality management systems, production process optimization, digital transformation

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: An Intelligent Framework for Implementing AIAG–VDA FMEA and Action Priority (AP) Assessment. https://app.cochat.ai/papers/10.3390/app16052591
The paper
Oancea, A.-V., Ionescu, L.-M., Rontescu, C., Ionescu, N., Misztal, A., Bogatu, A.-M., Știrbu, C., Cicic, D.-T., & Stanciu, E.-M. (2026). An Intelligent Framework for Implementing AIAG–VDA FMEA and Action Priority (AP) Assessment. Applied Sciences. https://doi.org/10.3390/app16052591

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.