Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Sign Up
Cited by 77

The DOI matches its Crossref record.

Research on the Mechanical, Thermal, Induction Heating and Healing Properties of Steel Slag/Steel Fibers Composite Asphalt Mixture

Liu, Quantao, Li, Bin, Schlangen, Erik, Sun, Yihan, Wu, Shaopeng·2017·Applied Sciences
DOI 10.3390/app7101088
Open this paper in CoChat — free account

Abstract

In this paper, steel slag/steel fiber composite asphalt mixture were prepared. The effects of the addition of steel slag and/or steel fibers on the mechanical, thermal, induction heating and healing properties of asphalt mixture were investigated. The results showed that adding steel slag and/or steel fibers improves the water stability, particle loss resistance and fracture energy of asphalt mixtures. The addition of steel fibers increased the thermal conductivity and thermal diffusion of the asphalt mixture, and steel slag showed a reverse effect. Steel slag asphalt mixture cooled more slowly than steel fiber asphalt mixture, which is beneficial to crack healing of asphalt mixture. The composite of steel fibers and steel slag can enhance the induction heating speed, heating homogeneity and thus enhance the induction healing ratio of asphalt mixture. It is concluded that steel slag/steel fibers composite asphalt mixture achieves good mechanical and induction healing properties.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/app7101088

Cites

Statistics

Figures

Figure 1 Gradation curves of basalt asphalt (BA) and steel slag (SS) mixture. Figure 1. Gradation curves of basalt asphalt (BA) and steel slag (SS) mixture.
Figure 1 Gradation curves of basalt asphalt (BA) and steel slag (SS) mixture. Figure 1. Gradation curves of basalt asphalt (BA) and steel slag (SS) mixture.CC-BY · From the PDF
Figure 2 Thermal parameter test points of specimen. Figure 2. Thermal parameter test points of specimen.
Figure 2 Thermal parameter test points of specimen. Figure 2. Thermal parameter test points of specimen.CC-BY · From the PDF
Figure 3 Heating and cooling testing system Figure 3. Heating and cooling testing system.
Figure 3 Heating and cooling testing system Figure 3. Heating and cooling testing system.CC-BY · From the PDF
Figure 4 Marshall Stability and Marshall Stability Ratio (MSR) of different asphalt mixtures. SF: steel fibers. Figure 4. Marshall Stability and Marshall Stability Ratio (MSR) of different asphalt mixtures. SF: steel fibers.
Figure 4 Marshall Stability and Marshall Stability Ratio (MSR) of different asphalt mixtures. SF: steel fibers. Figure 4. Marshall Stability and Marshall Stability Ratio (MSR) of different asphalt mixtures. SF: steel fibers.CC-BY · From the PDF
Figure 5 Particle loss resistances of different asphalt mixtures. Figure 5. Particle loss resistances of different asphalt mixtures. due to the reinforcement of steel fibers and the strong adhesion between asphalt and steel slag.
Figure 5 Particle loss resistances of different asphalt mixtures. Figure 5. Particle loss resistances of different asphalt mixtures. due to the reinforcement of steel fibers and the strong adhesion between asphalt and steel slag.CC-BY · From the PDF
Figure 6 Fracture energy and post-cracking energy of different asphalt mixtures. Figure 6. Fracture energy and post-cracking energy of different asphalt mixtures.
Figure 6 Fracture energy and post-cracking energy of different asphalt mixtures. Figure 6. Fracture energy and post-cracking energy of different asphalt mixtures.CC-BY · From the PDF
Figure 7 Temperature-versus-time curves of asphalt mixtures with induction heating. ( a ) During heating; ( b ) During cooling. Figure 7. Temperature-versus-time curves of asphalt mixtures with induction heating. ( a ) During heating; ( b ) During cooling.
Figure 7 Temperature-versus-time curves of asphalt mixtures with induction heating. ( a ) During heating; ( b ) During cooling. Figure 7. Temperature-versus-time curves of asphalt mixtures with induction heating. ( a ) During heating; ( b ) During cooling.CC-BY · From the PDF
Figure 8 Healing ratio of asphalt mixture under different heating temperatures Figure 8. Healing ratio of asphalt mixture under different heating temperatures.
Figure 8 Healing ratio of asphalt mixture under different heating temperatures Figure 8. Healing ratio of asphalt mixture under different heating temperatures.CC-BY · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

No references could be resolved yet.

Research works printed but not linked: 24

  1. Tabaković, A., Schuyffel, L., Karač, A., and Schlangen, E. (2017). An evaluation of the efficiency of compartmented alginate fibres encapsulating a rejuvenator as an asphalt pavement healing system. Appl. Sci., 7. · DOI
  2. Little, D., and Bhasin, A. (2007). Exploring mechanisms of healing in asphalt mixtures and quantifying its impact. Self Healing Materials an Alternative Approach to 20 Centuries of Materials Science, Springer. · DOI
  3. 2012, Self-healing of open cracks in asphalt mastic, Fuel, 93, 264, 10.1016/j.fuel.2011.09.009 · DOI
  4. Schlangen, 2009, Electrical conductivity of asphalt mortar containing conductive fibers and fillers, Constr, Build. Mater., 23, 3175, 10.1016/j.conbuildmat.2009.06.014 · DOI
  5. Ajam, 2016, Effect of air voids content on asphalt self-healing via induction and infrared heating, Constr. Build. Mater., 126, 957, 10.1016/j.conbuildmat.2016.09.115 · DOI
  6. Liu, 2010, Induction heating of electrically conductive porous asphalt concrete, Constr. Build. Mater., 24, 1207, 10.1016/j.conbuildmat.2009.12.019 · DOI
  7. Liu, 2013, Induction heating of asphalt mastic for crack control, Constr. Build. Mater., 41, 345, 10.1016/j.conbuildmat.2012.11.075 · DOI
  8. Yang, 2016, Effects of amorphous metallic fibers on the properties of asphalt concrete, Constr. Build. Mater., 128, 176, 10.1016/j.conbuildmat.2016.10.082 · DOI
  9. Pamulapati, 2017, Evaluation of self-healing of asphalt concrete through induction heating and metallic fibers, Constr. Build. Mater., 146, 66, 10.1016/j.conbuildmat.2017.04.064 · DOI
  10. Schlangen, 2011, Induction heating of mastic containing conductive fibers and fillers, Mater Struct., 44, 499, 10.1617/s11527-010-9644-2 · DOI
  11. Sun, 2017, Self-healing performance of asphalt mixtures through heating fibers or aggregate, Constr. Build. Mater., 150, 673, 10.1016/j.conbuildmat.2017.06.007 · DOI
  12. Liu, 2012, Evaluation of the induction healing effect of porous asphalt concrete through four point bending fatigue test, Constr. Build. Mater., 29, 403, 10.1016/j.conbuildmat.2011.10.058 · DOI
  13. Dai, 2013, Investigation of induction healing effects on electrically conductive asphalt mastic and asphalt concrete beams through fracture-healing tests, Constr. Build. Mater., 49, 729, 10.1016/j.conbuildmat.2013.08.089 · DOI
  14. Menozzi, 2015, Induction healing of fatigue damage in asphalt test samples, Constr. Build. Mater., 74, 162, 10.1016/j.conbuildmat.2014.10.034 · DOI
  15. He, 2017, Research on induction heating activated self-healing of cracks in dense graded asphalt mixture, China J. Highw. Transp., 30, 17
  16. Liu, Q. (2012). Induction Healing of Porous Asphalt Concrete. [Ph.D. Thesis, Delft University of Technology].
  17. 2016, Self-healing of asphalt mixture by microwave and induction heating, Master. Des., 106, 404
  18. Partl, 2013, Experimental evaluation of dense asphalt concrete properties for induction heating purposes, Constr. Build. Mater., 46, 48, 10.1016/j.conbuildmat.2013.04.030 · DOI
  19. Bueno, 2013, Induction healing of dense asphalt concrete, Constr. Build. Mater., 49, 1, 10.1016/j.conbuildmat.2013.07.105 · DOI
  20. Li, 2010, Using Semi Circular Bending Test to Evaluate Low Temperature Fracture Resistance for Asphalt Concrete, Exp. Mech., 5, 867, 10.1007/s11340-009-9303-0 · DOI
  21. RILEM TV-50 FMC (1985). Determination of the fracture energy of mortar and concrete by means of three-point bend tests on notched beams. Mater. Struct., 18, 285–290. · DOI
  22. Rossi, C., Teltayev, B., and Angelico, R. (2017). Adhesion Promoters in Bituminous Road Materials: A Review. Appl. Sci., 7. · DOI
  23. Sheng, Y., Li, H., Guo, P., Zhao, G., Chen, H., and Xiong, R. (2017). Effect of Fibers on Mixture Design of Stone Matrix Asphalt. Appl. Sci., 7. · DOI
  24. Xie, 2012, Recycling of basic oxygen furnace slag in asphalt mixture: Material characterization & moisture damage investigation, Constr. Build. Mater., 36, 467, 10.1016/j.conbuildmat.2012.06.023 · DOI

Cited by

See all 77

Metadata

Authors
Liu, Q., Li, B., Schlangen, E., Sun, Y., & Wu, S.
Venue
Applied Sciences
Publisher
MDPI AG
Published
2017-10-20
Volume
7
Issue
10
Pages
1088
ISSN
2076-3417
DOI
10.3390/app7101088
Cited by
77
References
0
Language
en
Licence
creativecommons.org/licenses/by/4.0/ (vor)

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Research on the Mechanical, Thermal, Induction Heating and Healing Properties of Steel Slag/Steel Fibers Composite Asphalt Mixture. https://app.cochat.ai/papers/10.3390/app7101088
The paper
Liu, Q., Li, B., Schlangen, E., Sun, Y., & Wu, S. (2017). Research on the Mechanical, Thermal, Induction Heating and Healing Properties of Steel Slag/Steel Fibers Composite Asphalt Mixture. Applied Sciences. https://doi.org/10.3390/app7101088

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.