Double Low-Rank and Sparse Decomposition for Surface Defect Segmentation of Steel Sheet
Open accessThe DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Abstract
Surface defect segmentation supports real-time surface defect detection system of steel sheet by reducing redundant information and highlighting the critical defect regions for high-level image understanding. Existing defect segmentation methods usually lack adaptiveness to different shape, size and scale of the defect object. Based on the observation that the defective area can be regarded as the salient part of image, a saliency detection model using double low-rank and sparse decomposition (DLRSD) is proposed for surface defect segmentation. The proposed method adopts a low-rank assumption which characterizes the defective sub-regions and defect-free background sub-regions respectively. In addition, DLRSD model uses sparse constrains for background sub-regions so as to improve the robustness to noise and uneven illumination simultaneously. Then the Laplacian regularization among spatially adjacent sub-regions is incorporated into the DLRSD model in order to uniformly highlight the defect object. Our proposed DLRSD-based segmentation method consists of three steps: firstly, using DLRSD model to obtain the defect foreground image; then, enhancing the foreground image to establish the good foundation for segmentation; finally, the Otsu’s method is used to choose an optimal threshold automatically for segmentation. Experimental results demonstrate that the proposed method outperforms state-of-the-art approaches in terms of both subjective and objective tests. Meanwhile, the proposed method is applicable to industrial detection with limited computational resources.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“These approaches are reported to perform well.”
From Automated Visual Defect Detection for Flat Steel Surface: A Survey (2020) · cites this paper as [99]
The cited source says what the claim attributes to it.
In the citing paper
“Zhou et al. [99] presented a double low-rank and sparse decomposition (DLRSD) model to obtain the defective region of steel sheet surface.”
From Automated Visual Defect Detection for Flat Steel Surface: A Survey (2020) · cites this paper as [99]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
SLIC Superpixels Compared to State-of-the-Art Superpixel Methods
Achanta, R., Shaji, A., Smith, K., Lucchi, A., Fua, P., & Süsstrunk, S. (2012) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2012.120 · Cited by 9,201 · cited 2×
“Then, in order to improve the efficiency of defect detection and achieve the better structural information about defect image, we conduct superpixel segmentation for image by adaptive simple linear iterative clustering (ASLIC) algorithm [30].”
MethodRobust principal component analysis?
Candès, E. J., Li, X., Ma, Y., & Wright, J. (2011) · Journal of the ACM · doi:10.1145/1970392.1970395 · Cited by 6,921 · cited 6×
“It has been shown that nuclear norm-based models can obtain the optimal low-rank solution in many kinds of applications [27,28].”
BackgroundMethodInfluentialGraph Regularized Nonnegative Matrix Factorization for Data Representation
Cai, D., He, X., Han, J., & Huang, T. S. (2011) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2010.231 · Cited by 2,451 · cited 1×
“To separate the defect object from the background easily, spatially adjacent sub-regions with smaller spatial distance and more similar feature vector should be assigned to similar and higher weight values, the local invariance assumption [26] based Laplacian regularization Θ(S, L) [24] can be defined as follows:”
BackgroundFrom Sparse Solutions of Systems of Equations to Sparse Modeling of Signals and Images
Bruckstein, A. M., Donoho, D. L., & Elad, M. (2009) · SIAM Review · doi:10.1137/060657704 · Cited by 2,183 · cited 1×
“It has been shown that nuclear norm-based models can obtain the optimal low-rank solution in many kinds of applications [27,28].”
BackgroundSaliency filters: Contrast based filtering for salient region detection
Perazzi, F., Krahenbuhl, P., Pritch, Y., & Hornung, A. (2012) · 2012 IEEE Conference on Computer Vision and Pattern Recognition · doi:10.1109/cvpr.2012.6247743 · Cited by 2,110
Saliency Optimization from Robust Background Detection
Zhu, W., Liang, S., Wei, Y., & Sun, J. (2014) · 2014 IEEE Conference on Computer Vision and Pattern Recognition · doi:10.1109/cvpr.2014.360 · Cited by 1,330 · cited 4×
“Qualitative comparisons: (a) ground-truth; (b) RPCA; (c) IS; (d) ULR; (e) RBD; (f) SBD; (g) DSR; (h) RS; (i) SMF; (j) Ours.”
MethodInfluentialImage Signature: Highlighting Sparse Salient Regions
Hou, X., Harel, J., & Koch, C. (2012) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2011.146 · Cited by 834 · cited 1×
“Our proposed method is compared with eight representative saliency detection methods quantitatively and qualitatively, such as RPCA [28], IS [13], ULR [23], RBD [31], SBD [32], DSR [33], RS [16] and SMF [24], where RPCA, IS, ULR, RBD, SBD, DSR, RS and SMF represent the method of robust principal component analysis, im…”
MethodA unified approach to salient object detection via low rank matrix recovery
Shen, X., & Wu, Y. (2012) · 2012 IEEE Conference on Computer Vision and Pattern Recognition · doi:10.1109/cvpr.2012.6247758 · Cited by 691 · cited 9×
“Our proposed method is compared with eight representative saliency detection methods quantitatively and qualitatively, such as RPCA [28], IS [13], ULR [23], RBD [31], SBD [32], DSR [33], RS [16] and SMF [24], where RPCA, IS, ULR, RBD, SBD, DSR, RS and SMF represent the method of robust principal component analysis, im…”
MethodInfluentialHierarchical Image Saliency Detection on Extended CSSD
Shi, J., Yan, Q., Xu, L., & Jia, J. (2016) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2015.2465960 · Cited by 574
ROBUST PRINCIPAL COMPONENT ANALYSIS
Alanzi, A. R. A. (2014) · OpenSIUC (Southern Illinois University Carbondale) · Cited by 419
Salient Object Detection via Structured Matrix Decomposition
Peng, H., Li, B., Ling, H., Hu, W., Xiong, W., & Maybank, S. J. (2017) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2016.2562626 · Cited by 378 · cited 12×
“[24] developed tree-structured sparsity-inducing regularization and Laplacian regularization to disentangle the salient objects and background precisely, and then obtained competitive results.”
BackgroundMethodInfluentialReview of vision-based steel surface inspection systems
Neogi, N., Mohanta, D. K., & Dutta, P. K. (2014) · EURASIP Journal on Image and Video Processing · doi:10.1186/1687-5281-2014-50 · Cited by 322
Fabric defect detection systems and methods—A systematic literature review
Hanbay, K., Talu, M. F., & Özgüven, Ö. F. (2016) · Optik · doi:10.1016/j.ijleo.2016.09.110 · Cited by 268
Visual Saliency Detection via Sparsity Pursuit
Yan, J., Zhu, M., Liu, H., & Liu, Y. (2010) · IEEE Signal Processing Letters · doi:10.1109/lsp.2010.2053200 · Cited by 171 · cited 1×
“[21] employed sparse coding as a feature representation vector of image.”
MethodSelf-citationTop-Down Visual Saliency via Joint CRF and Dictionary Learning
Yang, J., & Yang, M. (2016) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2016.2547384 · Cited by 168
Salient Object Detection: A Discriminative Regional Feature Integration Approach
Wang, J., Jiang, H., Yuan, Z., Cheng, M.-M., Hu, X., & Zheng, N. (2017) · International Journal of Computer Vision · doi:10.1007/s11263-016-0977-3 · Cited by 162
Steel Surface Defect Detection Using a New Haar–Weibull-Variance Model in Unsupervised Manner
Liu, K., Wang, H., Chen, H., Qu, E., Tian, Y., & Sun, H. (2017) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2017.2712838 · Cited by 161 · cited 2×
“transform [6], discrete Gabor transform [7] and discrete wavelet transform [8,9], apply a bank of filters to the image, in which the energies of the filters response are utilized as features to segment the defects.”
MethodZhang, L., Yang, C., Lu, H.-C., Ruan, X., & Yang, M.-H. (2017) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2016.2609426 · Cited by 111 · cited 1×
“Our proposed method is compared with eight representative saliency detection methods quantitatively and qualitatively, such as RPCA [28], IS [13], ULR [23], RBD [31], SBD [32], DSR [33], RS [16] and SMF [24], where RPCA, IS, ULR, RBD, SBD, DSR, RS and SMF represent the method of robust principal component analysis, im…”
MethodDense and Sparse Reconstruction Error Based Saliency Descriptor
Lu, H., Li, X., Zhang, L., Ruan, X., & Yang, M. (2016) · IEEE Transactions on Image Processing · doi:10.1109/tip.2016.2524198 · Cited by 103 · cited 6×
“Our proposed method is compared with eight representative saliency detection methods quantitatively and qualitatively, such as RPCA [28], IS [13], ULR [23], RBD [31], SBD [32], DSR [33], RS [16] and SMF [24], where RPCA, IS, ULR, RBD, SBD, DSR, RS and SMF represent the method of robust principal component analysis, im…”
MethodInfluentialThe phase only transform for unsupervised surface defect detection
Aiger, D., & Talbot, H. (2010) · 2010 IEEE Computer Society Conference on Computer Vision and Pattern Recognition · doi:10.1109/cvpr.2010.5540198 · Cited by 87 · cited 2×
“transform [6], discrete Gabor transform [7] and discrete wavelet transform [8,9], apply a bank of filters to the image, in which the energies of the filters response are utilized as features to segment the defects.”
MethodTHE PHASE ONLY TRANSFORM FOR UNSUPERVISED SURFACE DEFECT DETECTION
Aiger, D., & Talbot, H. (2011) · Series in Computer Vision · doi:10.1142/9789814343008_0011 · Cited by 73
Zhao, Y. J., Yan, Y. H., & Song, K. C. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-9489-0 · Cited by 59 · cited 3×
“In order to verify and evaluate the effectiveness and robustness of the proposed method, we have adopted the NEU surface defect database established by Kechen Song [12] in our experiments.”
BackgroundMethodInfluentialTextile fabric defect detection based on low-rank representation
Li, P., Liang, J., Xu-bang, S., Zhao, M., & Sui, L. (2017) · Multimedia Tools and Applications · doi:10.1007/s11042-017-5263-z · Cited by 59
Defect detection for corner cracks in steel billets using a wavelet reconstruction method
Jeon, Y.-J., Choi, D.-C., Lee, S. J., Yun, J. P., & Kim, S. W. (2014) · Journal of the Optical Society of America A · doi:10.1364/josaa.31.000227 · Cited by 58 · cited 2×
“transform [6], discrete Gabor transform [7] and discrete wavelet transform [8,9], apply a bank of filters to the image, in which the energies of the filters response are utilized as features to segment the defects.”
MethodDetection of Pinholes in Steel Slabs Using Gabor Filter Combination and Morphological Features
Choi, D.-C., Jeon, Y.-J., Kim, S. H., Moon, S., Yun, J. P., & Kim, S. W. (2017) · ISIJ International · doi:10.2355/isijinternational.isijint-2016-160 · Cited by 54 · cited 2×
“transform [6], discrete Gabor transform [7] and discrete wavelet transform [8,9], apply a bank of filters to the image, in which the energies of the filters response are utilized as features to segment the defects.”
MethodVision-based surface defect inspection for thick steel plates
Yun, J. P., Kim, D., Kim, K., Lee, S. J., Park, C. H., & Kim, S. W. (2017) · Optical Engineering · doi:10.1117/1.oe.56.5.053108 · Cited by 47
A Method for Automatic Surface Inspection Using a Model-Based 3D Descriptor
Madrigal, C. A., Branch, J. W., Restrepo-Martínez, A., & Mery, D. (2017) · Sensors · doi:10.3390/s17102262 · Cited by 45
Unsupervised Joint Salient Region Detection and Object Segmentation
Zou, W., Liu, Z., Kpalma, K., Ronsin, J., Zhao, Y. H., & Nikos Komodakis, A. (2015) · IEEE Transactions on Image Processing · doi:10.1109/tip.2015.2456497 · Cited by 39 · cited 1×
“[22] designed multi-scale superpixel segmentation to construct the feature matrix and prior matrix.”
MethodA Hybrid of Local and Global Saliencies for Detecting Image Salient Region and Appearance
Peng, Q., Cheung, Y., You, X., & Tang, Y. Y. (2016) · IEEE Transactions on Systems Man and Cybernetics Systems · doi:10.1109/tsmc.2016.2564922 · Cited by 36 · cited 1×
“The quality and effectiveness of segmentation are decided by the quality of saliency map [20].”
BackgroundA surface defects inspection method based on multidirectional gray-level fluctuation
Ma, Y., Li, Q., Zhou, Y., He, F., & Xi, S. (2017) · International Journal of Advanced Robotic Systems · doi:10.1177/1729881417703114 · Cited by 26 · cited 1×
“Statistical-based methods, such as Otsu’s method [5], gray level co-occurrence matrix, local binary pattern, maximum entropy, region growing and morphological watersheds, are used to evaluate the spatial distribution of pixel intensities for segmentation.”
MethodStrip Steel Defect Detection Based on Saliency Map Construction Using Gaussian Pyramid Decomposition
Guan, S. (2015) · ISIJ International · doi:10.2355/isijinternational.isijint-2015-041 · Cited by 24 · cited 1×
“[10] proposed saliency map construction method using Gaussian pyramid decomposition.”
MethodSaliency Detection With Spaces of Background-Based Distribution
Zhao, T., Li, L., Ding, X.-H., Huang, Y., & Zeng, D.-L. (2016) · IEEE Signal Processing Letters · doi:10.1109/lsp.2016.2544781 · Cited by 23 · cited 5×
“Our proposed method is compared with eight representative saliency detection methods quantitatively and qualitatively, such as RPCA [28], IS [13], ULR [23], RBD [31], SBD [32], DSR [33], RS [16] and SMF [24], where RPCA, IS, ULR, RBD, SBD, DSR, RS and SMF represent the method of robust principal component analysis, im…”
MethodInfluentialDiversity induced matrix decomposition model for salient object detection
Sun, X., He, Z., Xu, C., Zhang, X., Zou, W., & Baciu, G. (2017) · Pattern Recognition · doi:10.1016/j.patcog.2017.01.012 · Cited by 14 · cited 1×
“[25] presented diversity-induced regularization based on Hilbert–Schmidt independence criterion, which make the background much cleaner in the saliency map and boost the saliency detection performance.”
MethodSalient object detection using coarse-to-fine processing
Zhou, Q., Zhang, L., Zhao, W., Liu, X., Chen, Y., & Wang, Z. (2017) · Journal of the Optical Society of America A · doi:10.1364/josaa.34.000370 · Cited by 2
Cited by
Automated Visual Defect Detection for Flat Steel Surface: A Survey
Luo, Q., Fang, X., Liu, L., Yang, C., & Sun, Y. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2963555 · Cited by 559
“[99] presented a double low-rank and sparse decomposition (DLRSD) model to obtain the defective region of steel sheet surface.”
BackgroundVisual-Based Defect Detection and Classification Approaches for Industrial Applications—A SURVEY
Czimmermann, T., Ciuti, G., Milazzo, M., Chiurazzi, M., Roccella, S., Oddo, C. M., & Dario, P. (2020) · Sensors · doi:10.3390/s20051459 · Cited by 441
EDRNet: Encoder–Decoder Residual Network for Salient Object Detection of Strip Steel Surface Defects
Song, G., Song, K., & Yan, Y. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2020.3002277 · Cited by 309
“As a fast image preprocessing operation, it has been widely used in various computer vision tasks including image segmentation [3], defect classification [4]–[6], defect inspection [7]–[12], and object tracking [13].”
MethodSteel Surface Defect Recognition: A Survey
Wen, X., Shan, J., He, Y., & Song, K. (2022) · Coatings · doi:10.3390/coatings13010017 · Cited by 210
Research Progress of Automated Visual Surface Defect Detection for Industrial Metal Planar Materials
Fang, X., Luo, Q., Zhou, B., Li, C., & Tian, L. (2020) · Sensors · doi:10.3390/s20185136 · Cited by 160
“Visual saliency model [83] Double low-rank and sparse decomposition Multi-type defects Mixed pattern information and pseudo-noise interference Robust to noise and uneven illumination Limitations on gradient strength or low contrast defects”
BackgroundInfluential
Metadata
- Authors
- Zhou, S., Wu, S., Liu, H., Lu, Y., & Hu, N.
- Affiliations
- Wuhan University of Science and Technology (CN)
- Corresponding author
- Wu, Shiqian
- Venue
- Applied Sciences
- Publisher
- MDPI AG
- Published
- 2018-09-12
- Volume
- 8
- Issue
- 9
- Pages
- 1628
- ISSN
- 2076-3417 (ISSN-L)
- OpenAlex
- W2890391196
- Semantic Scholar
- bdb53422adafc2d7f947f7512ff8c246aada9d5b
- Cited by
- 28
- References
- 34
- Citations by year
- 2026: 1 · 2025: 1 · 2024: 7 · 2023: 3 · 2022: 4 · 2021: 3 · 2020: 6 · 2019: 3
- FWCI
- 2.49
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Applied Sciences (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- National Natural Science Foundation of China (51805386, 61775172)
- Natural Science Foundation of Hubei Province
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Industrial Vision Systems and Defect Detection
- Physical Sciences › Engineering › Civil and Structural Engineering › Infrastructure Maintenance and Monitoring
- Physical Sciences › Engineering › Mechanical Engineering › Non-Destructive Testing Techniques
- Keywords
- surface defect segmentation, steel sheet, low-rank and sparse decomposition, saliency detection, Laplacian regularization, foreground segmentation, Otsu thresholding, industrial defect detection
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.