The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Effect of Pyrolysis Temperature on Biochar Microstructural Evolution, Physicochemical Characteristics, and Its Influence on Biochar/Polypropylene Composites
Open accessAbstract
Environmental management through effective utilization of biowastes has been a topic of intensive research in recent years. This study examines the effect of pyrolysis temperature on the physical and morphological characteristic of biochar (BC) derived from lignocellulosic wastes. The biochar was prepared by pyrolysing date palm biomass at various temperatures, i.e., 300, 400, 500, 600, and 700 °C. These pyrolysed biochars were then characterized for their carbon content, mineral compositions, chemical functionalities, and morphological structures, for understanding their physicochemical characteristics and microstructural evolution. It was revealed that the pyrolytic condition plays a key role in the formation of biochar microstructure. These biochar samples were then utilized without any further treatments/purifications for their practical application as reinforcement materials for polymer composites. They were blended with a polypropylene matrix by a melt mixing technique followed by injection molding process. The type of biochar was found to significantly affect the composites properties. Differences in microstructure, surface chemistry, and chemical compositions of BCs were observed to be determining factors affecting the compatibility and thermomechanical properties of resulted composites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Polymer nanotechnology: Nanocomposites
Paul, D. R., & Robeson, L. M. (2008) · Polymer · doi:10.1016/j.polymer.2008.04.017 · Cited by 3,317
Compositions and sorptive properties of crop residue-derived chars
Chun, Y., Sheng, G., Chiou, C. T., & Xing, B. (2004) · Environmental Science & Technology · doi:10.1021/es035034w · Cited by 1,079
Influence of Pyrolysis Temperature on Biochar Property and Function as a Heavy Metal Sorbent in Soil
Uchimiya, M., Wartelle, L. H., Klasson, K. T., Fortier, C. A., & Lima, I. M. (2011) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf104206c · Cited by 854
Effect of pyrolysis temperature, heating rate, and residence time on rapeseed stem derived biochar
Zhao, B., O'Connor, D., Zhang, J., Peng, T., Shen, Z., Tsang, D. C. W., & Hou, D. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.11.013 · Cited by 843
Calculation of higher heating values of biomass fuels
Demirbaş, A. (1997) · Fuel · doi:10.1016/s0016-2361(97)85520-2 · Cited by 817
Xiong, X., Yu, I. K. M., Cao, L., Tsang, D. C. W., Zhang, S., & Ok, Y. S. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.06.163 · Cited by 532
Recent advances in engineered biochar productions and applications
Wang, B., Gao, B., & Fang, J. (2017) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643389.2017.1418580 · Cited by 501
Biomass-based pyrolytic polygeneration system on cotton stalk pyrolysis: Influence of temperature
Chen, Y., Yang, H., Wang, X., Zhang, S., & Chen, H. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2011.10.074 · Cited by 446
Biochar as a sustainable electrode material for electricity production in microbial fuel cells
Huggins, T., Wang, H., Kearns, J., Jenkins, P., & Ren, Z. J. (2014) · Bioresource Technology · doi:10.1016/j.biortech.2014.01.058 · Cited by 405
Rafiq, M. K., Bachmann, R. T., Rafiq, M. T., Shang, Z., Joseph, S., & Long, R. (2016) · PLOS ONE · doi:10.1371/journal.pone.0156894 · Cited by 376
Usman, A. R. A., Abduljabbar, A., Vithanage, M., Ok, Y. S., Ahmad, M., Ahmad, M., Elfaki, J., Abdulazeem, S. S., & Al-Wabel, M. I. (2015) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2015.08.016 · Cited by 354
Self-citationXiao, X., Chen, Z., & Chen, B. (2016) · Scientific Reports · doi:10.1038/srep22644 · Cited by 309 · cited 1×
“Also, the decrease in the ((O+N)/C) ratio, which is known as the polarity index, indicates a reduction of the biochars surface polar functional groups with increased pyrolytic temperatures [26].”
Preparation and Application of Biochar-Based Catalysts for Biofuel Production
Cheng, F., & Li, X. (2018) · Catalysts · doi:10.3390/catal8090346 · Cited by 293
Li, S., & Chen, G. (2018) · Waste Management · doi:10.1016/j.wasman.2018.05.048 · Cited by 279
Application of biochar-based catalysts in biomass upgrading: A review
Cao, X., Sun, S., & Sun, R. (2017) · RSC Adv. · doi:10.1039/c7ra09307a · Cited by 249
A review on production and characterization of biochars for application in direct carbon fuel cells
Jafri, N., Wong, W. Y., Doshi, V., Yoon, L. W., & Cheah, K. H. (2018) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2018.06.036 · Cited by 236
Das, O., Sarmah, A. K., & Bhattacharyya, D. (2015) · Waste Management · doi:10.1016/j.wasman.2015.01.015 · Cited by 219
Recent developments of post-modification of biochar for electrochemical energy storage
Cheng, B.-H., Zeng, R. J., & Jiang, H. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.07.060 · Cited by 216
Das, O., Sarmah, A. K., & Bhattacharyya, D. (2016) · Waste Management · doi:10.1016/j.wasman.2015.12.007 · Cited by 200
Srinivasan, P., Sarmah, A. K., Smernik, R., Das, O., Farid, M., & Gao, W. (2015) · Science of The Total Environment · doi:10.1016/j.scitotenv.2015.01.068 · Cited by 193
Structure–mechanics property relationship of waste derived biochars
Das, O., Sarmah, A. K., & Bhattacharyya, D. (2015) · Science of The Total Environment · doi:10.1016/j.scitotenv.2015.08.073 · Cited by 163
Agricultural Biomass Based Potential Materials
(2015) · Springer eBooks · doi:10.1007/978-3-319-13847-3 · Cited by 161
Graphitic biochar as a cathode electrocatalyst support for microbial fuel cells
Huggins, T. M., Pietron, J. J., Wang, H., Ren, Z. J., & Biffinger, J. C. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2015.06.012 · Cited by 160
Behazin, E., Ogunsona, E., Rodriguez-Uribe, A., Mohanty, A. K., Misra, M., & Anyia, A. O. (2015) · BioResources · doi:10.15376/biores.11.1.1334-1348 · Cited by 142
Poulose, A. M., Elnour, A. Y., Anis, A., Shaikh, H., Al-Zahrani, S. M., George, J., Al-Wabel, M. I., Usman, A. R. A., Ok, Y. S., Tsang, D. C. W., et al. (2017) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2017.11.076 · Cited by 141
Self-citationDas, O., Bhattacharyya, D., & Sarmah, A. K. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.04.088 · Cited by 128
Behazin, E., Misra, M., & Mohanty, A. K. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2017.03.003 · Cited by 123
Nagarajan, V., Mohanty, A. K., & Misra, M. (2016) · ACS Omega · doi:10.1021/acsomega.6b00175 · Cited by 117
Carbon stability and mitigation of fertilizer induced N2O emissions in soil amended with biochar
Grutzmacher, P., Puga, A. P., Bibar, M. P. S., Coscione, A. R., Packer, A. P., & de Andrade, C. A. (2018) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2017.12.196 · Cited by 115
Ikram, S., Das, O., & Bhattacharyya, D. (2016) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.10.010 · Cited by 111
An Attempt to Find a Suitable Biomass for Biochar-Based Polypropylene Biocomposites
Das, O., Kim, N. K., Hedenqvist, M. S., Lin, R., Sarmah, A. K., & Bhattacharyya, D. (2018) · Environmental Management · doi:10.1007/s00267-018-1033-6 · Cited by 82
Nanoindentation assisted analysis of biochar added biocomposites
Das, O., Sarmah, A. K., & Bhattacharyya, D. (2016) · Composites Part B Engineering · doi:10.1016/j.compositesb.2016.01.057 · Cited by 72
Characterization, Modification and Application of Biochar for Energy Storage and Catalysis: A Review
Xiu, S., Shahbazi, A., & Li, R. (2017) · Trends in Renewable Energy · doi:10.17737/tre.2017.3.1.0033 · Cited by 70
Snowdon, M. R., Mohanty, A. K., & Misra, M. (2017) · ACS Omega · doi:10.1021/acsomega.7b00983 · Cited by 59
Thermal and flame retardancy properties of thermoplastics/natural fiber biocomposites
Fu, S., Song, P., & Liu, X. (2016) · Elsevier eBooks · doi:10.1016/b978-0-08-100411-1.00019-4 · Cited by 52
Effect of Wood-derived Charcoal Content on Properties of Wood Plastic Composites
Ayrılmış, N., Kwon, J. H., Han, T. H., & Durmuş, A. (2015) · Materials Research · doi:10.1590/1516-1439.001515 · Cited by 32
Crystallization Behavior of Polypropylene Filled with Modified Carbon Black
Chen, J., Li, X., & Wu, C. (2007) · Polymer Journal · doi:10.1295/polymj.pj2006084 · Cited by 29
Cited by
Al-Rumaihi, A., Shahbaz, M., Mckay, G., Mackey, H., & Al-Ansari, T. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112715 · Cited by 650
Khalid, M. Y., Arif, Z. U., Ahmed, W., & Arshad, H. (2022) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2021.e00382 · Cited by 314
Biochar for soil applications-sustainability aspects, challenges and future prospects
Kamali, M., Sweygers, N., Al-Salem, S., Appels, L., Aminabhavi, T. M., & Dewil, R. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.131189 · Cited by 304
Ganie, Z. A., Khandelwal, N., Tiwari, E., Singh, N., & Darbha, G. K. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2021.126096 · Cited by 261
Incorporation of biochar in cementitious materials: A roadmap of biochar selection
Maljaee, H., Madadi, R., Paiva, H., Tarelho, L., & Ferreira, V. M. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.122757 · Cited by 250
Metadata
- Authors
- Elnour, A. Y., Alghyamah, A. A., Shaikh, H. M., Poulose, A. M., Al-Zahrani, S. M., Anis, A., & Al-Wabel, M. I.
- Venue
- Applied Sciences
- Publisher
- MDPI AG
- Published
- 2019-03-18
- Volume
- 9
- Issue
- 6
- Pages
- 1149
- ISSN
- 2076-3417 (ISSN-L)
- OpenAlex
- W2921856664
- Cited by
- 360
- References
- 37
- FWCI
- 7.63
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.