Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 36 of the 37 references it cites were found in a registry or an index; none of the 16 sources its claims cite is checked for support yet.

CubeSat Mission: From Design to Operation

Open access
Nieto-Peroy, Cristóbal, Emami, M. Reza · 2019 · Applied Sciences

Abstract

The current success rate of CubeSat missions, particularly for first-time developers, may discourage non-profit organizations to start new projects. CubeSat development teams may not be able to dedicate the resources that are necessary to maintain Quality Assurance as it is performed for the reliable conventional satellite projects. This paper discusses the structured life-cycle of a CubeSat project, using as a reference the authors’ recent experience of developing and operating a 2U CubeSat, called qbee50-LTU-OC, as part of the QB50 mission. This paper also provides a critique of some of the current poor practices and methodologies while carrying out CubeSat projects.

Overview

CoChat Summary

TL;DR

This paper presents a structured life-cycle account of a 2U CubeSat mission, qbee50-LTU-OC (SE01), from project initiation through fabrication, testing, delivery, and operations as part of the QB50 mission. It uses that experience to critique common CubeSat practices and highlight quality-assurance, testing, and operational lessons for prospective developers.

Key findings

  • University-led CubeSats have an early failure rate around 48%, and CubeSats in LEO at 400 km typically decay to reentry within one to two years.
  • The SE01 2U CubeSat had a total mass of 1900 g, below the QB50 limit of 2000 g and the 2U CubeSat Specification limit of 2660 g; it carried the FIPEX primary payload and the OC-OBC secondary payload.
  • SE01 launched on 18 April 2017 with 27 other QB50 satellites on an Atlas-V to the ISS, was deployed on 17 May, operated for nearly one year, and reentered on 26 February 2019.
  • Thermal-vacuum bake-out at 50 °C and 1 × 10⁻⁵ mbar for 3 h caused only 2 g mass loss, less than 1% of total mass; random vibration applied 8.03 g RMS for 120 s per axis, with 9.30 g RMS actually experienced.

Methods

  • The paper is an experience-based case study and critique, using the authors’ development and operation of the SE01 CubeSat as a reference mission within the QB50 constellation.
  • It follows the project life cycle across initiation, contracts and timeline, registration and frequency allocation, QA and documentation, facilities, fabrication and integration, verification and validation, delivery, and operations.
  • Reported data include mission budgets, test conditions and results, link-budget values, power-budget values, and operational timelines from the SE01 mission.

Limitations

  • The paper states that ESA’s QA standard is mainly tailored to conventional space missions and that even partial implementation can improve CubeSat success rates, but applying it can create notable documentation burdens for small teams.
  • The paper notes that some tests or conditions were constrained, e.g., the shock test was waived because SE01 was a proto-flight model, and thermal-vacuum cycling included long constant-temperature periods at 25 °C due to operator unavailability overnight.
  • Evident from the text: the findings are drawn from a single 2U CubeSat mission and are presented as a reference and critique rather than a comparative or statistically generalizable study.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.3390/app9153110

Cites

36 of 36 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Verification

Claims the paper makes

0 Valid · 8 Not valid · 14 Not checked · 55 Own results and interpretations

21 more claims

Create a free account to see all 77 claims and to verify the 9 references still open.

See all claims — free account
  • It may state two separate claims as one. 16
  • Probably not a substantial claim. 46

Create a free account to see these claims.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

1 of 1

Citations

Cites

Show all 37 references

Research works printed but not linked: 2

  1. Bach, C., Pellegrino, A., Di Battista, R., and Toson, E. (2016, January 26–30). Importance and challenges of hands-on experience in astronautical education. Proceedings of the International Astronautical Congress, Guadalajara, Mexico.
  2. Verma, A., Duann, Y., and Boyajian, S. (2018, January 4–9). INSPIRESat-1 Nanosat Mission. Proceedings of the AIAA/USU Conference on Small Satellites, Logan, UT, USA.

Cited by

See all 103

Metadata

Authors
Nieto-Peroy, C., & Emami, M. R.
Affiliations
  • Onboard Space Systems Group, Department of Computer Science, Electrical and Space Engineering, Luleå University of Technology, Space Campus, 981 92 Kiruna, Sweden
  • University of Toronto (CA)
Corresponding author
Emami, M. Reza
Venue
Applied Sciences
Publisher
MDPI AG
Published
2019-08-01
Volume
9
Issue
15
Pages
3110
ISSN
2076-3417 (ISSN-L)
OpenAlex
W2965366524
Cited by
103
References
37
Citations by year
2026: 11 · 2025: 9 · 2024: 15 · 2023: 19 · 2022: 19 · 2021: 18 · 2020: 12
FWCI
9.01
Type
journal article
Language
en
Open access
Locations
  • Applied Sciences (publishedVersion, cc-by)
  • TSpace (University of Toronto) (submittedVersion, other-oa)
  • Diva portal (Dalarna University Library) (submittedVersion, other-oa)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Topics
  • Physical Sciences › Engineering › Aerospace Engineering › Spacecraft Design and Technology
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Space Technology and Applications
  • Physical Sciences › Engineering › Aerospace Engineering › Space Satellite Systems and Control
Keywords
CubeSat, quality assurance, mission operations

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: CubeSat Mission: From Design to Operation. https://app.cochat.ai/papers/10.3390/app9153110
The paper
Nieto-Peroy, C., & Emami, M. R. (2019). CubeSat Mission: From Design to Operation. Applied Sciences. https://doi.org/10.3390/app9153110

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.