Exploring the Economic Potential of Sodium-Ion Batteries
Open accessThe DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
Sodium-ion batteries (SIBs) are a recent development being promoted repeatedly as an economically promising alternative to lithium-ion batteries (LIBs). However, only one detailed study about material costs has yet been published for this battery type. This paper presents the first detailed economic assessment of 18,650-type SIB cells with a layered oxide cathode and a hard carbon anode, based on existing datasheets for pre-commercial battery cells. The results are compared with those of competing LIB cells, that is, with lithium-nickel-manganese-cobalt-oxide cathodes (NMC) and with lithium-iron-phosphate cathodes (LFP). A sensitivity analysis further evaluates the influence of varying raw material prices on the results. For the SIB, a cell price of 223 €/kWh is obtained, compared to 229 €/kWh for the LFP and 168 €/kWh for the NMC batteries. The main contributor to the price of the SIB cells are the material costs, above all the cathode and anode active materials. For this reason, the amount of cathode active material (e.g., coating thickness) in addition to potential fluctuations in the raw material prices have a considerable effect on the price per kWh of storage capacity. Regarding the anode, the precursor material costs have a significant influence on the hard carbon cost, and thus on the final price of the SIB cell. Organic wastes and fossil coke precursor materials have the potential of yielding hard carbon at very competitive costs. In addition, cost reductions in comparison with LIBs are achieved for the current collectors, since SIBs also allow the use of aluminum instead of copper on the anode side. For the electrolyte, the substitution of lithium with sodium leads to only a marginal cost decrease from 16.1 to 15.8 €/L, hardly noticeable in the final cell price. On the other hand, the achievable energy density is fundamental. While it seems difficult to achieve the same price per kWh as high energy density NMC LIBs, the SIB could be a promising substitute for LFP cells in stationary applications, if it also becomes competitive with LFP cells in terms of safety and cycle life.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A cost and resource analysis of sodium-ion batteries
Vaalma, C., Buchholz, D., Weil, M., & Passerini, S. (2018) · Nature Reviews Materials · doi:10.1038/natrevmats.2018.13 · Cited by 2,613 · cited 4×
“While cost aspects are repeatedly used as an argument for SIBs, only one tentative economic assessment of SIB cells has yet been published [8].”
BackgroundInfluentialSelf-citationLife cycle assessment of a lithium-ion battery vehicle pack
Ellingsen, L. A., Majeau‐Bettez, G., Singh, B., Srivastava, A. K., Valøen, L. O., & Strømman, A. H. (2014) · Journal of Industrial Ecology · doi:10.1111/jiec.12072 · Cited by 665 · cited 1×
“Component Sub-component Unit NMMT NMC LFP own [12] [13] own [8] [9] [14] own [8] [15] [14] Anode Active material g 8.”
BackgroundMajeau-Bettez, G., Hawkins, T. R., & Strømman, A. H. (2011) · Environmental Science & Technology · doi:10.1021/es103607c · Cited by 662 · cited 1×
“The NMC cell was dimensioned correspondingly based on literature data [48,49].”
MethodLife cycle assessment of lithium-ion batteries for plug-in hybrid electric vehicles–Critical issues
Zackrisson, M., Avellán, L., & Orlenius, J. (2010) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2010.06.004 · Cited by 551 · cited 1×
“Component Sub-component Unit NMMT NMC LFP own [12] [13] own [8] [9] [14] own [8] [15] [14] Anode Active material g 8.”
Background
Cited by
Tian, Y., Zeng, G., Rutt, A., Shi, T., Kim, H., Wang, J., Koettgen, J., Sun, Y., Ouyang, B., Chen, T., et al. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00767 · Cited by 1,614
From Li‐Ion Batteries toward Na‐Ion Chemistries: Challenges and Opportunities
Chayambuka, K., Mulder, G., Danilov, D. L., & Notten, P. H. L. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202001310 · Cited by 694
Na‐Ion Batteries—Approaching Old and New Challenges
Goikolea, E., Palomares, V., Wang, S., de Larramendi, I. R., Guo, X., Wang, G., & Rojo, T. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202002055 · Cited by 573
Anode‐Free Full Cells: A Pathway to High‐Energy Density Lithium‐Metal Batteries
Nanda, S., Gupta, A., & Manthiram, A. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000804 · Cited by 537
Engineering of Sodium-Ion Batteries: Opportunities and Challenges
Zhao, L., Zhang, T., Li, W., Li, T., Zhang, L., Zhang, X., & Wang, Z. (2023) · Engineering · doi:10.1016/j.eng.2021.08.032 · Cited by 451
High-Energy Batteries: Beyond Lithium-Ion and Their Long Road to Commercialisation
Gao, Y., Pan, Z., Sun, J., Liu, Z., & Wang, J. (2022) · Nano-Micro Letters · doi:10.1007/s40820-022-00844-2 · Cited by 378
Challenges of today for Na-based batteries of the future: From materials to cell metrics
Hasa, I., Mariyappan, S., Saurel, D., Adelhelm, P., Koposov, A. Y., Masquelier, C., Croguennec, L., & Casas-Cabanas, M. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228872 · Cited by 305
Commercialisation of high energy density sodium-ion batteries: Faradion's journey and outlook
Rudola, A., Rennie, A. J. R., Heap, R., Meysami, S. S., Lowbridge, A., Mazzali, F., Sayers, R., Wright, C. J., & Barker, J. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta00376c · Cited by 289
2021 roadmap for sodium-ion batteries
Tapia-Ruiz, N., Armstrong, A. R., Alptekin, H., Amores, M. A., Au, H., Barker, J., Boston, R., Brant, W. R., Brittain, J. M., Chen, Y., et al. (2021) · Journal of Physics: Energy · doi:10.1088/2515-7655/ac01ef · Cited by 273
Metadata
- Authors
- Peters, J. F., Peña Cruz, A., & Weil, M.
- Venue
- Batteries
- Publisher
- MDPI AG
- Published
- 2019-01-16
- Volume
- 5
- Issue
- 1
- Pages
- 10
- ISSN
- 2313-0105 (ISSN-L)
- OpenAlex
- W2909589327
- Cited by
- 229
- References
- 4
- FWCI
- 6.43
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.