The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Recent Advances in 3D Printing of Aliphatic Polyesters
Open accessAbstract
3D printing represents a valuable alternative to traditional processing methods, clearly demonstrated by the promising results obtained in the manufacture of various products, such as scaffolds for regenerative medicine, artificial tissues and organs, electronics, components for the automotive industry, art objects and so on. This revolutionary technique showed unique capabilities for fabricating complex structures, with precisely controlled physical characteristics, facile tunable mechanical properties, biological functionality and easily customizable architecture. In this paper, we provide an overview of the main 3D-printing technologies currently employed in the case of poly (lactic acid) (PLA) and polyhydroxyalkanoates (PHA), two of the most important classes of thermoplastic aliphatic polyesters. Moreover, a short presentation of the main 3D-printing methods is briefly discussed. Both PLA and PHA, in the form of filaments or powder, proved to be suitable for the fabrication of artificial tissue or scaffolds for bone regeneration. The processability of PLA and PHB blends and composites fabricated through different 3D-printing techniques, their final characteristics and targeted applications in bioengineering are thoroughly reviewed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443 · cited 2×
“Generally, amorphous grades have better processability and wid r processing window than the crystalline grades [25] but much low r mechanical properties (Table 1).”
BackgroundAlmeida, C. R., Serra, T., Oliveira, M. I., Planell, J. A., Barbosa, M. A., & Navarro, M. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.10.035 · Cited by 290
Kamei, K.-I., Mashimo, Y., Koyama, Y., Fockenberg, C., Nakashima, M., Nakajima, M., Li, J., & Chen, Y. (2015) · Biomedical Microdevices · doi:10.1007/s10544-015-9928-y · Cited by 196
Cited by
Additive Manufacturing of Polymer Materials: Progress, Promise and Challenges
Saleh Alghamdi, S., John, S., Roy Choudhury, N., & Dutta, N. K. (2021) · Polymers · doi:10.3390/polym13050753 · Cited by 469
Poly(butylene succinate) (PBS): Materials, processing, and industrial applications
Barletta, M., Aversa, C., Ayyoob, M., Gisario, A., Hamad, K., Mehrpouya, M., & Vahabi, H. (2022) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2022.101579 · Cited by 443
Alizadeh-Osgouei, M., Li, Y., & Wen, C. (2019) · Bioactive Materials · doi:10.1016/j.bioactmat.2018.11.003 · Cited by 356
Domínguez-Robles, J., Martin, N. K., Fong, M. L., Stewart, S. A., Irwin, N. J., Rial-Hermida, M. I., Donnelly, R. F., & Larrañeta, E. (2019) · Pharmaceutics · doi:10.3390/pharmaceutics11040165 · Cited by 281
Melčová, V., Svoradová, K., Menčík, P., Kontárová, S., Rampichová, M., Hedvičáková, V., Sovková, V., Přikryl, R., & Vojtová, L. (2020) · Polymers · doi:10.3390/polym12122806 · Cited by 50
Metadata
- Authors
- Chiulan, I., Frone, A., Brandabur, C., & Panaitescu, D.
- Venue
- Bioengineering
- Publisher
- MDPI AG
- Published
- 2017-12-24
- Volume
- 5
- Issue
- 1
- Pages
- 2
- ISSN
- 2306-5354 (ISSN-L)
- OpenAlex
- W2779703805
- Cited by
- 189
- References
- 3
- FWCI
- 4.84
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Recent Advances in 3D Printing of Aliphatic Polyesters. https://app.cochat.ai/papers/10.3390/bioengineering5010002
- The paper
- Chiulan, I., Frone, A., Brandabur, C., & Panaitescu, D. (2017). Recent Advances in 3D Printing of Aliphatic Polyesters. Bioengineering. https://doi.org/10.3390/bioengineering5010002
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.