CoChat

3D printing of soft lithography mold for rapid production of polydimethylsiloxane-based microfluidic devices for cell stimulation with concentration gradients

The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.

Abstract

Three-dimensional (3D) printing is advantageous over conventional technologies for the fabrication of sophisticated structures such as 3D micro-channels for future applications in tissue engineering and drug screening. We aimed to apply this technology to cell-based assays using polydimethylsiloxane (PDMS), the most commonly used material for fabrication of micro-channels used for cell culture experiments. Useful properties of PDMS include biocompatibility, gas permeability and transparency. We developed a simple and robust protocol to generate PDMS-based devices using a soft lithography mold produced by 3D printing. 3D chemical gradients were then generated to stimulate cells confined to a micro-channel. We demonstrate that concentration gradients of growth factors, important regulators of cell/tissue functions in vivo, influence the survival and growth of human embryonic stem cells. Thus, this approach for generation of 3D concentration gradients could have strong implications for tissue engineering and drug screening.

Overview

Integrity signals

Registry

Crossref · 10.1007/s10544-015-9928-y

Cites

33 of 33 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Show all 33 references

Research works printed but not linked: 6

  1. E. Cukierman, K.E. Sung, X. Su, E. Berthier, C. Pehlke, A. Friedl, D.J. Beebe, PLoS One 10, e76373 (2013)
  2. D.S. Eom, S. Amarnath, J.L. Fogel, S. Agarwala, Development 138, 15 (2011)
  3. B.J. Kim, M. Wu, Ann. Biomed. Eng. 40, 6 (2012)
  4. D.B. Kolesky, R.L. Truby, A.S. Gladman, T.A. Busbee, K.A. Homan, J.A. Lewis, Adv. Mater. 26, 19 (2014)
  5. T. Ludwig, V. Bergendahl, M. Levenstein, J. Yu, M.D. Probasco, J. Thomson, Nat. Meth. 3, 8 (2006a)
  6. J. Yu, M.A. Vodyanik, K. Smuga-Otto, J. Antosiewicz-Bourget, J.L. Frane, S. Tian, J. Nie, G.A. Jonsdottir, V. Ruotti, R. Stewart, I.I. Slukvin, J.A. Thomson, Science 318, 5858 (2007)

Cited by

See all 197

Metadata

Authors
Kamei, K.-I., Mashimo, Y., Koyama, Y., Fockenberg, C., Nakashima, M., Nakajima, M., Li, J., & Chen, Y.
Affiliations
  • Kyoto University (JP)
  • Tokyo Institute of Technology (JP)
  • Centre National de la Recherche Scientifique (FR)
Corresponding author
  • Kamei, Ken-ichiro
  • Chen, Yong
Venue
Biomedical Microdevices
Published
2015-02-17
Volume
17
Issue
2
Pages
36-36
ISSN
  • 1387-2176 (ISSN-L)
  • 1572-8781
OpenAlex
W2048971561
Cited by
196
References
31
Citations by year
2026: 7 · 2025: 12 · 2024: 13 · 2023: 23 · 2022: 21 · 2021: 20 · 2020: 17 · 2019: 19 · 2018: 27 · 2017: 13 · 2016: 17 · 2015: 7
FWCI
10.60
Type
journal article
Language
en
Open access
closed
Licence
www.springer.com/tdm (tdm)
Locations
  • Biomedical Microdevices (publishedVersion)
  • PubMed (publishedVersion)
  • Institutional Repositories DataBase (IRDB) (submittedVersion)
Funders
Japan Society for the Promotion of Science (14F04046)
Topics
  • Physical Sciences › Engineering › Biomedical Engineering › Microfluidic and Capillary Electrophoresis Applications
  • Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
  • Life Sciences › Biochemistry, Genetics and Molecular Biology › Cell Biology › Cellular Mechanics and Interactions
Keywords
3D printing, polydimethylsiloxane, microfluidics, concentration gradient, growth factor gradients, human embryonic stem cells, cell stimulation, microchannels, tissue engineering, drug screening
MeSH terms
Animals, Dimethylpolysiloxanes, Equipment Design, Female, Fibroblasts, Humans, Mice, Inbred ICR, Pregnancy, Cell Culture Techniques, Hydrogels, Intercellular Signaling Peptides and Proteins, Embryonic Stem Cells, Lab-On-A-Chip Devices, Printing, Three-Dimensional

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: 3D printing of soft lithography mold for rapid production of polydimethylsiloxane-based microfluidic devices for cell stimulation with concentration gradients. https://app.cochat.ai/papers/10.1007/s10544-015-9928-y
The paper
Kamei, K.-I., Mashimo, Y., Koyama, Y., Fockenberg, C., Nakashima, M., Nakajima, M., Li, J., & Chen, Y. (2015). 3D printing of soft lithography mold for rapid production of polydimethylsiloxane-based microfluidic devices for cell stimulation with concentration gradients. Biomedical Microdevices. https://doi.org/10.1007/s10544-015-9928-y

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.