The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Microfabricated and 3-D Printed Soft Bioelectronic Constructs from PAn-PAAMPSA-Containing Hydrogels
Abstract
The formation of hybrid bioactive and inherently conductive constructs of composites formed from polyaniline-polyacrylamidomethylpropane sulfonic acid (PAn-PAAMPSA) nanomaterials (0.00–10.0 wt%) within poly(2-hydroxy ethyl methacrylate-co-N-{Tris(hydroxymethyl)methyl} acrylamide)-co-polyethyleneglycol methacrylate) p(HEMA-co-HMMA-co-PEGMA) hydrogels was made possible using microlithographic fabrication and 3-D printing. Hybrid constructs formed by combining a non-conductive base (0.00 wt% PAn-PAAMPSA) and electroconductive (ECH) (varying wt% PAn-PAAMPSA) hydrogels using these two production techniques were directly compared. Hydrogels were electrically characterized using two-point probe resistivity and electrochemical impedance spectroscopy. Results show that incorporation of >0.10 wt% PAn-PAAMPSA within the base hydrogel matrices was enough to achieve percolation and high conductivity with a membrane resistance (RM) of 2140 Ω and 87.9 Ω for base (0.00 wt%) and ECH (10.0 wt%), respectively. UV-vis spectroscopy of electroconductive hydrogels indicated a bandgap of 2.8 eV that was measurable at concentrations of >0.10 wt% PAn-PAAMPSA. Both base and electroconductive hydrogels supported the attachment and growth of NIH/3T3 fibroblast cells. When the base hydrogel was rendered bioactive by the inclusion of collagen (>200 µg/mL), it also supported the attachment, but not the differentiation, of PC-12 neural progenitor cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“This technology is now widely used in regenerative medicine, tissue engineering, and implantology [13,14].”
From 3D Printing of Thermoresponsive Hydrogel Laden with an Antimicrobial Agent towards Wound Healing Applications (2021) · cites this paper as [13]
In the citing paper
“Advances in 3D printing technology have enabled 3D fabricating of functional scaffolds for tissues from both natural and synthetic biocompatible materials, cells, and cell-support materials.”
From 3D Printing of Thermoresponsive Hydrogel Laden with an Antimicrobial Agent towards Wound Healing Applications (2021) · cites this paper as [13]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Billiet, T., Gevaert, E., De Schryver, T., Cornelissen, M., & Dubruel, P. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.09.078 · Cited by 1,015 · cited 1×
“To achieve this, improved understanding of the role of and interactions between biological agents, physicochemical properties, and engineering factors is required [6].”
Background
Research works printed but not linked: 25
- Li, 2018, All Inkjet-Printed Amperometric Multiplexed Biosensors Based on Nanostructured Conductive Hydrogel Electrodes, Nano Lett., 18, 3322, 10.1021/acs.nanolett.8b00003 · DOI · Paper page
- Tran, 2017, Lithography-based methods to manufacture biomaterials at small scales, J. Sci. Adv. Mater. Devices, 2, 1, 10.1016/j.jsamd.2016.12.001 · DOI
- Kyle, 2017, ‘Printability’ of Candidate Biomaterials for Extrusion Based 3D Printing: State-of-the-Art, Adv. Healthc. Mater., 6, 1700264, 10.1002/adhm.201700264 · DOI · Paper page
- Cullen, 2008, Developing a tissue-engineered neural-electrical relay using encapsulated neuronal constructs on conducting polymer fibers, J. Neural Eng., 5, 374, 10.1088/1741-2560/5/4/002 · DOI
- Trojaborg, 1970, Rate of recovery in motor and sensory fibres of the radial nerve: Clinical and electrophysiological aspects, J. Neurol. Neurosurg. Psychiatry, 33, 625, 10.1136/jnnp.33.5.625 · DOI
- Jeon, 2013, Charge storage in polymer acid-doped polyaniline-based layer-by-layer electrodes, ACS Appl. Mater. Interfaces, 5, 10127, 10.1021/am402809e · DOI
- Bieberich, 2004, Neuronal differentiation and synapse formation of PC12 and embryonic stem cells on interdigitated microelectrode arrays: Contact structures for neuron-to-electrode signal transmission (NEST), Biosens. Bioelectron., 19, 923, 10.1016/j.bios.2003.08.016 · doi:10.1016/j.bios.2003.08.016
- Gumuscu, 2015, Photopatterning of Hydrogel Microarrays in Closed Microchips, Biomacromolecules, 16, 3802, 10.1021/acs.biomac.5b01104 · doi:10.1021/acs.biomac.5b01104
- Khan, 2011, Patterning collagen/poloxamine-methacrylate hydrogels for tissue-engineering-inspired microfluidic and laser lithography applications, J. Biomater. Sci. Polym. Ed., 22, 2499, 10.1163/092050610X540693 · doi:10.1163/092050610x540693
- Hahn, 2006, Photolithographic patterning of polyethylene glycol hydrogels, Biomaterials, 27, 2519, 10.1016/j.biomaterials.2005.11.045 · DOI · Paper page
- Khetan, 2011, Patterning hydrogels in three dimensions towards controlling cellular interactions, Soft Matter, 7, 830, 10.1039/C0SM00852D · DOI · Paper page
- He, 2016, Research on the printability of hydrogels in 3D bioprinting, Sci. Rep., 6, 29977, 10.1038/srep29977 · DOI · Paper page
- Malda, 2013, 25th anniversary article: Engineering hydrogels for biofabrication, Adv. Mater., 25, 5011, 10.1002/adma.201302042 · DOI · Paper page
- Sarker, M.D., Naghieh, S., McInnes, A.D., Schreyer, D.J., and Chen, X. (2018). Regeneration of peripheral nerves by nerve guidance conduits: Influence of design, biopolymers, cells, growth factors, and physical stimuli. Prog. Neurobiol. · DOI · Paper page
- Simon, 2016, Organic Bioelectronics: Bridging the Signaling Gap between Biology and Technology, Chem. Rev., 116, 13009, 10.1021/acs.chemrev.6b00146 · DOI · Paper page
- Gleissle, 2003, Validity of the Cox–Merz rule for concentrated suspensions, J. Rheol., 47, 897, 10.1122/1.1574020 · DOI
- Habib, A., Sathish, V., Mallik, S., and Khoda, B. (2018). 3D Printability of Alginate-Carboxymethyl Cellulose Hydrogel. Materials, 11. · DOI · Paper page
- Huang, 1999, Polyaniline doped with different sulfonic acids by in situ doping polymerization, J. Polym. Sci. Part A Poly. Chem., 37, 1277, 10.1002/(SICI)1099-0518(19990501)37:9<1277::AID-POLA7>3.0.CO;2-A · doi:10.1002/(sici)1099-0518(19990501)37:9<1277::aid-pola7>3.0.co;2-a
- Padmapriya, 2018, Storage and evolution of hydrogen in acidic medium by polyaniline, Int. J. Energy Res., 42, 1196, 10.1002/er.3920 · doi:10.1002/er.3920
- Rana, 2011, Impedance spectra analysis to characterize interdigitated electrodes as electrochemical sensors, Electrochim. Acta, 56, 8559, 10.1016/j.electacta.2011.07.055 · doi:10.1016/j.electacta.2011.07.055
- Huang, 2014, Conducting Hydrogels of Tetraaniline-g-poly(vinyl alcohol) in Situ Reinforced by Supramolecular Nanofibers, ACS Appl. Mater. Interfaces, 6, 1595, 10.1021/am4043799 · doi:10.1021/am4043799
- Kerry, B.L. (2018). Conductive Polymer-Based Functional Structures for Neural Therapeutic Applications. Conjugated Polymers for Biological and Biomedical Applications, John Wiley & Sons. · DOI
- Bhana, 2010, Influence of substrate stiffness on the phenotype of heart cells, Biotechnol. Bioeng., 105, 1148, 10.1002/bit.22647 · DOI · Paper page
- Carter, 1990, The role of integrins alpha 2 beta 1 and alpha 3 beta 1 in cell-cell and cell-substrate adhesion of human epidermal cells, J. Cell Biol., 110, 1387, 10.1083/jcb.110.4.1387 · DOI · Paper page
- Justin, 2010, Electroconductive blends of poly (HEMA-co-PEGMA-co-HMMAco-SPMA) and poly (Py-co-PyBA): In vitro biocompatibility, J. Bioact. Compat. Polym., 25, 121, 10.1177/0883911509350660 · DOI
Cited by
Seoane-Viaño, I., Januskaite, P., Alvarez-Lorenzo, C., Basit, A. W., & Goyanes, A. (2021) · Journal of Controlled Release · doi:10.1016/j.jconrel.2021.02.027 · Cited by 357
Nizioł, M., Paleczny, J., Junka, A., Shavandi, A., Dawiec-Liśniewska, A., & Podstawczyk, D. (2021) · Bioengineering · doi:10.3390/bioengineering8060079 · Cited by 85
Metadata
- Authors
- Aggas, J. R., Abasi, S., Smith, B., Zimmerman, M., Deprest, M., & Guiseppi-Elie, A.
- Venue
- Bioengineering
- Publisher
- MDPI AG
- Published
- 2018-10-17
- Volume
- 5
- Issue
- 4
- Pages
- 87
- ISSN
- 2306-5354
- Cited by
- 15
- References
- 1
- Language
- en
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Microfabricated and 3-D Printed Soft Bioelectronic Constructs from PAn-PAAMPSA-Containing Hydrogels. https://app.cochat.ai/papers/10.3390/bioengineering5040087
- The paper
- Aggas, J. R., Abasi, S., Smith, B., Zimmerman, M., Deprest, M., & Guiseppi-Elie, A. (2018). Microfabricated and 3-D Printed Soft Bioelectronic Constructs from PAn-PAAMPSA-Containing Hydrogels. Bioengineering. https://doi.org/10.3390/bioengineering5040087
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.