The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Catalytic Pyrolysis of Biomass and Polymer Wastes
Open accessAbstract
Oil produced by the pyrolysis of biomass and co-pyrolysis of biomass with waste synthetic polymers has significant potential as a substitute for fossil fuels. However, the relatively poor properties found in pyrolysis oil—such as high oxygen content, low caloric value, and physicochemical instability—hampers its practical utilization as a commercial petroleum fuel replacement or additive. This review focuses on pyrolysis catalyst design, impact of using real waste feedstocks, catalyst deactivation and regeneration, and optimization of product distributions to support the production of high value-added products. Co-pyrolysis of two or more feedstock materials is shown to increase oil yield, caloric value, and aromatic hydrocarbon content. In addition, the co-pyrolysis of biomass and polymer waste can contribute to a reduction in production costs, expand waste disposal options, and reduce environmental impacts. Several promising options for catalytic pyrolysis to become industrially viable are also discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review
Mohan, D., Pittman, C. U., & Steele, P. H. (2006) · Energy & Fuels · doi:10.1021/ef0502397 · Cited by 5,663 · cited 2×
“…involves a slow heating rates of 0.1–1 ◦ C/s, a residence time varying from minutes to hours and a temperature range of 400–600 ◦ C. Slow pyrolysis has been used to produce methanol, but also results in the formation of large amounts of side products—such as char, gas, and low-quality liquid [17].”
InfluentialReview of fast pyrolysis of biomass and product upgrading
Bridgwater, A. V. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.01.048 · Cited by 4,856
Bozell, J. J., & Petersen, G. R. (2010) · Green Chemistry · doi:10.1039/b922014c · Cited by 4,566
Kan, T., Strezov, V., & Evans, T. J. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.185 · Cited by 2,239
Application of biochar for the removal of pollutants from aqueous solutions
Tan, X., Liu, Y., Zeng, G., Wang, X., Hu, X., Gu, Y., & Yang, Z. (2015) · Chemosphere · doi:10.1016/j.chemosphere.2014.12.058 · Cited by 2,081 · cited 1×
“Regarding the interaction between the pollutants and biochar, physical adsorption, ion exchange, electrostatic attraction, surface complexation and precipitation, hydrogen bond, hydrophobic effect, and pore filling are proposed [25].”
The role of carbon materials in heterogeneous catalysis
Rodríguez-reinoso, F. (1998) · Carbon · doi:10.1016/s0008-6223(97)00173-5 · Cited by 1,760 · cited 1×
“Biochar is also considered as a precursor of activated carbon with further dehydrating treatment that can be used as catalyst support [27].”
Catalytic conversion of lignocellulosic biomass to fine chemicals and fuels
Zhou, C.-H., Xia, X., Lin, C.-X., Tong, D.-S., & Beltramini, J. (2011) · Chemical Society Reviews · doi:10.1039/c1cs15124j · Cited by 1,420 · cited 1×
“In practice, the H/C eff ratio is a parameter that is strongly related to the carbon yield of aromatics and the formation of byproducts such as coke and bio-char [76,77].”
Furfural—A Promising Platform for Lignocellulosic Biofuels
Lange, J., van der Heide, E., van Buijtenen, J., & Price, R. (2012) · ChemSusChem · doi:10.1002/cssc.201100648 · Cited by 1,323
Influence of inorganic salts on the primary pyrolysis products of cellulose
Patwardhan, P. R., Satrio, J. A., Brown, R. C., & Shanks, B. H. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.01.112 · Cited by 799
A review of the chemical and physical mechanisms of the storage stability of fast pyrolysis bio-oils
Diebold, J. P. (1999) · doi:10.2172/753818 · Cited by 549
Catalytic co-pyrolysis of lignocellulosic biomass with polymers: a critical review
Zhang, X., Lei, H., Chen, S., & Wu, J. (2016) · Green Chemistry · doi:10.1039/c6gc00911e · Cited by 497
Controlling the selectivity to chemicals from lignin via catalytic fast pyrolysis
Ma, Z., Troussard, E., & van Bokhoven, J. A. (2012) · Applied Catalysis A: General · doi:10.1016/j.apcata.2012.02.027 · Cited by 363
Bio-oil from fast pyrolysis of lignin: Effects of process and upgrading parameters
Fan, L., Zhang, Y., Liu, S., Zhou, N., Chen, P., Cheng, Y., Addy, M., Lu, Q., Omar, M. M., Liu, Y., et al. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.05.129 · Cited by 265
Kawamoto, H., Murayama, M., & Saka, S. (2003) · Journal of Wood Science · doi:10.1007/s10086-002-0487-5 · Cited by 229
Comparison of in-situ and ex-situ catalytic pyrolysis in a micro-reactor system
Wang, K., Johnston, P. A., & Brown, R. C. (2014) · Bioresource Technology · doi:10.1016/j.biortech.2014.09.097 · Cited by 227
Jaiswal, A. K., Elad, Y., Paudel, I., Graber, E. R., Cytryn, E., & Frenkel, O. (2017) · Scientific Reports · doi:10.1038/srep44382 · Cited by 217 · cited 1×
“Besides pollution removal, the benefits of biochar also include depressing soil disease microbial growth and increasing soil enzymes activities [26].”
Screening heterogeneous catalysts for the pyrolysis of lignin
Jackson, M. A., Compton, D. L., & Boateng, A. A. (2009) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2008.09.016 · Cited by 187
Product quality and catalyst deactivation in a four day catalytic fast pyrolysis production run
Paasikallio, V., Lindfors, C., Kuoppala, E., Solantausta, Y., Oasmaa, A., Lehto, J., & Lehtonen, J. (2014) · Green Chemistry · doi:10.1039/c4gc00571f · Cited by 154 · cited 1×
“Paasikallio et al. [261] carried out a four-day pilot-scale CFP of pine sawdust using HZSM-5 catalyst a spray drying process.”
Effect of molecular weight on the pyrolysis characteristics of alkali lignin
Guo, D., Wu, S., Lyu, G., & Guo, H. (2017) · Fuel · doi:10.1016/j.fuel.2016.12.042 · Cited by 85
A comparison of the pyrolysis behavior of selected β-O-4 type lignin model compounds
Jiang, W., Wu, S., Lucia, L. A., & Chu, J. (2017) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2017.04.003 · Cited by 53 · cited 1×
“Four typical β -O-4 lignin dimer [42] compounds with different substituents at the C α and C β positions (Figure 2) were synthesized and used to investigate the effect of the substituent group on chemical reactions during lignin pyrolysis.”
Cited by
The future of hydrogen: Challenges on production, storage and applications
Rasul, M. G., Hazrat, M. A., Sattar, M. A., Jahirul, M. I., & Shearer, M. J. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.116326 · Cited by 856
Kumar, M., Sun, Y., Rathour, R., Pandey, A., Thakur, I. S., & Tsang, D. C. W. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.137116 · Cited by 472
Waste tyre valorization by catalytic pyrolysis – A review
Arabiourrutia, M., Lopez, G., Artetxe, M., Alvarez, J., Bilbao, J., & Olazar, M. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.109932 · Cited by 284
Wu, Y., Wang, H., Li, H., Han, X., Zhang, M., Sun, Y., Fan, X., Tu, R., Zeng, Y., Xu, C. C., et al. (2022) · Renewable Energy · doi:10.1016/j.renene.2022.07.031 · Cited by 274
Lahijani, P., Mohammadi, M., Mohamed, A. R., Ismail, F., Lee, K. T., & Amini, G. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.115956 · Cited by 269
Metadata
- Authors
- Zhang, L., Bao, Z., Xia, S., Lu, Q., & Walters, K. B.
- Venue
- Catalysts
- Publisher
- MDPI AG
- Published
- 2018-12-13
- Volume
- 8
- Issue
- 12
- Pages
- 659
- ISSN
- 2073-4344 (ISSN-L)
- OpenAlex
- W2905355935
- Cited by
- 186
- References
- 20
- FWCI
- 5.57
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.