Performance Evaluation of a Small-Scale Latent Heat Thermal Energy Storage Unit for Heating Applications Based on a Nanocomposite Organic PCM
Open accessThe DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Abstract
A small-scale latent heat thermal energy storage (LHTES) unit for heating applications was studied experimentally using an organic phase change material (PCM). The unit comprised of a tank filled with the PCM, a staggered heat exchanger (HE) for transferring heat from and to the PCM, and a water pump to circulate water as a heat transfer fluid (HTF). The performance of the unit using the commercial organic paraffin A44 was studied in order to understand the thermal behavior of the system and the main parameters that influence heat transfer during the PCM melting and solidification processes. The latter will assist the design of a large-scale unit. The effect of flow rate was studied given that it significantly affects charging (melting) and discharging (solidification) processes. In addition, as organic PCMs have low thermal conductivity, the possible improvement of the PCM’s thermal behavior by means of nanoparticle addition was investigated. The obtained results were promising and showed that the use of graphite-based nanoplatelets improves the PCM thermal behavior. Charging was clearly faster and more efficient, while with the appropriate tuning of the HTF flow rate, an efficient discharging was accomplished.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures













Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The NPs reduced time for both charging and discharging and made it more efficient.”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [81]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“An issue occurred during solidification where NePCM coated the heat pipes and impeded heat transfer; however, this was easily overcome by slowing the HTF initially and then speeding it up throughout solidification [81].”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [81]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“NPs reduced charging and discharging times”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [81]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“HTF flow rates of 30, 45, and 60 L/h were tested, with faster flow rates leading to faster melting.”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [81]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Describing the uncertainties in experimental results
Moffat, R. J. (1988) · Experimental Thermal and Fluid Science · doi:10.1016/0894-1777(88)90043-x · Cited by 9,860 · cited 2×
“The calculation of uncertainty δ for t mperature, T and volumetric HTF flow rate, V: was conducted according to the following equations [39,40]:”
MethodPereira da Cunha, J., & Eames, P. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.05.097 · Cited by 1,080
Lin, Y., Jia, Y., Alva, G., & Fang, G. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.10.002 · Cited by 910
Heat and cold storage with PCM: An up to date introduction into basics and applications
Mehling, H., & Cabeza, L. F. (2008) · Heat and Mass Transfer · doi:10.1007/978-3-540-68557-9 · Cited by 894
Study on paraffin/expanded graphite composite phase change thermal energy storage material
Zhang, Z., & Fang, X. (2006) · Energy Conversion and Management · doi:10.1016/j.enconman.2005.03.004 · Cited by 518 · cited 3×
“These results are in good agreement with previous reports [32,33].”
BackgroundResultZhang, Z., Zhang, N., Peng, J., Fang, X., Gao, X., & Fang, Y. (2012) · Applied Energy · doi:10.1016/j.apenergy.2011.10.014 · Cited by 454 · cited 3×
“These results are in good agreement with previous reports [32,33].”
BackgroundResultExperimental evaluation of commercial heat exchangers for use as PCM thermal storage systems
Medrano, M., Yilmaz, M. O., Nogués, M., Martorell, I., Roca, J., & Cabeza, L. F. (2009) · Applied Energy · doi:10.1016/j.apenergy.2009.01.014 · Cited by 448 · cited 2×
“using an organic PCM [22] and it was proved that a staggered finned tube HE used in air-conditioning units was by far the one with the highest average thermal power.”
BackgroundMethodThermal performance enhancement of shell and tube Latent Heat Storage Unit using longitudinal fins
Rathod, M. K., & Banerjee, J. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.10.074 · Cited by 427 · cited 1×
“Rathod and Banerjee [13] reported a reduction in process time, 24% for melting and 44% for solidification by the addition of only three longitudinal fins on a tube.”
BackgroundLeong, K. Y., Abdul Rahman, M. R., & Gurunathan, B. A. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2018.11.008 · Cited by 405
Shi, J.-N., Ger, M.-D., Liu, Y.-M., Fan, Y.-C., Wen, N.-T., Lin, C.-K., & Pu, N.-W. (2013) · Carbon · doi:10.1016/j.carbon.2012.08.068 · Cited by 328 · cited 1×
“[29] reported that thermal conductivity of paraffin was augmented by 10 times with the inclusion of 10 wt% of exfoliated graphite nanoplatelets.”
Background
Cited by
Okogeri, O., & Stathopoulos, V. N. (2021) · International Journal of Thermofluids · doi:10.1016/j.ijft.2021.100081 · Cited by 180
Self-citationPhase change materials in solar domestic hot water systems: A review
Douvi, E., Pagkalos, C., Dogkas, G., Koukou, M. K., Stathopoulos, V. N., Caouris, Y., & Vrachopoulos, M. G. (2021) · International Journal of Thermofluids · doi:10.1016/j.ijft.2021.100075 · Cited by 161
Self-citationNano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review
Tofani, K., & Tiari, S. (2021) · Energies · doi:10.3390/en14133821 · Cited by 114
“(2019) [81] Paraffin (A44) (44 ◦C) Low Graphite nano-platelets and finned heat pipes Melting and solidification Experimental NPs reduced charging and discharging times”
BackgroundJunaid, M. F., Rehman, Z. U., Ijaz, N., Čekon, M., Čurpek, J., & Elhag, A. B. (2022) · Energy and Buildings · doi:10.1016/j.enbuild.2022.112280 · Cited by 68
Dogkas, G., Koukou, M. K., Konstantaras, J., Pagkalos, C., Lymperis, K., Stathopoulos, V. N., Coelho, L., Rebola, A., & Vrachopoulos, M. G. (2020) · International Journal of Thermofluids · doi:10.1016/j.ijft.2020.100027 · Cited by 51
Self-citationA review of phase change materials and heat enhancement methodologies
Saqib, M., & Andrzejczyk, R. (2022) · Wiley Interdisciplinary Reviews Energy and Environment · doi:10.1002/wene.467 · Cited by 54
Murthy, B. V. R., Thanaiah, K., & Gumtapure, V. (2021) · Solar Energy · doi:10.1016/j.solener.2021.12.019 · Cited by 27
Pandis, P. K., Papaioannou, S., Siaperas, V., Terzopoulos, A., & Stathopoulos, V. N. (2020) · International Journal of Thermofluids · doi:10.1016/j.ijft.2020.100025 · Cited by 26
Self-citationHonrubia, J. L. D. A., de la Puerta, J. G., Cortés, F., Aguirre, U., Goti, A., & Retolaza, J. (2021) · Mathematics · doi:10.3390/math9101120 · Cited by 12
“This analysis has ranged from more traditional and simple forms [1], to much more complex ones [2].”
BackgroundPatil, R., & Desai, A. D. (2021) · International Journal of Ambient Energy · doi:10.1080/01430750.2021.1997805 · Cited by 2
“As stated in Figure 4, two sample references (Koukou et al. 2019; Wang et al. 2016) are considered to compare the melting rates of the PCM with the present study.”
Anticorrosive AlN coatings for heat exchangers in thermal energy storage systems
Panagiotopoulos, N. T., Lekatou, A. G., Agrafioti, K. A., Prouskas, C., Koukou, M. K., Konstantaras, J., Lymperis, K., Vrachopoulos, M. G., & Evangelakis, G. A. (2023) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2023.102014 · Cited by 2
Self-citationThe structural and key technological analysis of phase-change cooling garments
Wang, S., Gui, X., Huang, Y., Shang, M., & Ding, L. (2025) · International Journal of Occupational Safety and Ergonomics · doi:10.1080/10803548.2025.2468155 · Cited by 1
“These materials offer a balanced combination of flexibility and heat retention, with a latent heat storage capacity comparable to paraffin but with increased stability and reusability under repeated thermal cycles [100].”
Ojike, O., Clausel, T. T. B., Anyanwu, C., Eke, M., & Abam, F. I. (2025) · Results in Engineering · doi:10.1016/j.rineng.2025.106706
Huarza, A. H., Quiñonez-Choquecota, J., CONDORI, A. F., & Salinas, V. R. (2025) · LACCEI International Multi-Conference for Engineering, Education and Technology (LACCEI) · doi:10.18687/laccei2025.1.1.946
Metadata
- Authors
- Koukou, M. K., Dogkas, G., Vrachopoulos, M. G., Konstantaras, J., Pagkalos, C., Lymperis, K., Stathopoulos, V., Evangelakis, G., Prouskas, C., Coelho, L., & Rebola, A.
- Affiliations
- National and Kapodistrian University of Athens (GR)
- Z&X Mechanical Installations Ltd., 12 Agapinoros Street, 8049 Paphos, Cyprus
- University of Ioannina (GR)
- Polytechnic Institute of Setubal-IPS, 2910-761 Setúbal, Portugal
- Corresponding author
- Koukou, Maria K.
- ORCID
- Venue
- ChemEngineering
- Publisher
- MDPI AG
- Published
- 2019-11-01
- Volume
- 3
- Issue
- 4
- Pages
- 88
- ISSN
- 2305-7084 (ISSN-L)
- OpenAlex
- W2989153716
- Cited by
- 13
- References
- 38
- Citations by year
- 2025: 2 · 2023: 1 · 2022: 2 · 2021: 6 · 2020: 2
- FWCI
- 1.41
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- ChemEngineering (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- TESSE2B PROJECT HORIZON (680555)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Phase Change Materials Research
- Physical Sciences › Engineering › Mechanical Engineering › Adsorption and Cooling Systems
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Solar Thermal and Photovoltaic Systems
- Keywords
- latent heat storage, organic phase change materials, graphite nanoplatelets, heating applications, heat transfer fluid flow rate, PCM melting and solidification, thermal conductivity enhancement
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.