Semiconducting Metal Oxides: SrTiO3, BaTiO3 and BaSrTiO3 in Gas-Sensing Applications: A Review
Open accessThe DOI matches its Crossref record; 122 of the 122 references it cites were found in a registry or an index.
Abstract
In this work, a broad overview in the field of strontium titanate (ST, SrTiO3)-, barium titanate (BT, BaTiO3)- and barium strontium titanate (BST, BaSrTiO3)-based gas sensors is presented and discussed. The above-mentioned materials are characterized by a perovskite structure with long-term stability and therefore are very promising materials for commercial gas-sensing applications. Within the last 20 years, the number of papers where ST, BT and BST materials were tested as gas-sensitive materials has ten times increased and therefore an actual review about them in this field has been expected by readers, who are researchers involved in gas-sensing applications and novel materials investigations, as well as industry research and development center members, who are constantly searching for gas-sensing materials exhibiting high 3S parameters (sensitivity, selectivity and stability) that can be adapted for commercial realizations. Finally, the NO2-sensing characteristics of the BST-based gas sensors deposited by the authors with the utilization of magnetron sputtering technology are presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures
![Figure 1 Selected statistical data of the global gas sensor market: ( a ) share of major sectors of the economy in the gas detector market for Europe; ( b ) global market for gas sensors broken down into regions-prediction; APAC-Asia Pacific, RoW-rest of the world, 2019 e-estimation, 2024 p-prediction [7,8]. Various materials have been validated for gas-sensing applications; however, the Figure 1. Selected statistical data of the global gas sensor market: ( a ) share of major sectors of the economy in the gas detector market for Europe; ( b ) global market for gas sensors broken down into regions-prediction; APAC-Asia Pacific, RoW-rest of the world, 2019 e-estimation, 2024 p-prediction [7,8].](https://figures.cochat.ai/paper-figures/ed726596efbe47a1a45ff6e990e33522/semiconducting-metal-oxides-srtio3-batio3-and-basrtio3-in-gas-sensing-figure-1.png)




![Figure 6 Examples of BaSrTiO3 gas sensors: ( a ) The Ba0.5 Sr 0.5 TiO 3 film doped with RuO2 model (the result of the copper wire installation) of a sensor for bad breath gas analysis. ( b ) The physical appearance of a Ba0.5 Sr0.5 TiO3 film doped with a RuO2 probe of a sensor for bad breath gas analysis. ( c ) The gas-sensing response of the BaSrTiO3 gas sensor under exposure to NH3 (30-110 ppm) at various RH concentrations. Reprinted with permission from [69] Copyright 2021 Elsevier. ( d ) Sketch of the gas reaction model of BST-based gas sensors to various NH3 concentrations. This model showed the impact of RH capillary condensation towards NH3 detection. Reprinted with permission from [69] Copyright 2021 Elsevier.](https://figures.cochat.ai/paper-figures/96aef8e901a842448d5a5073b9d67e77/semiconducting-metal-oxides-srtio3-batio3-and-basrtio3-in-gas-sensing-figure-6.png)

Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Vacuum deposition methods, such as thermal evaporation and magnetron sputtering, are crucial techniques for fabricating perovskite sensors, which are conducted in a vacuum environment to ensure high-quality and pure thin films [109, 133].”
From Design Strategies and Emerging Applications of Perovskite-Based Sensors (2025) · cites this paper as [133]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Detection of individual gas molecules adsorbed on graphene
Schedin, F., Geim, A. K., Morozov, S. V., Hill, E. W., Blake, P., Katsnelson, M. I., & Novoselov, K. S. (2007) · Nature Materials · doi:10.1038/nmat1967 · Cited by 8,028
Scott, J. F. (2000) · Springer Series in Advanced Microelectronics · doi:10.1007/978-3-662-04307-3 · Cited by 1,424
A review of piezoelectric polymers as functional materials for electromechanical transducers
Ramadan, K. S., Sameoto, D., & Evoy, S. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/3/033001 · Cited by 1,060
Moseley, P. T. (1997) · Measurement Science and Technology · doi:10.1088/0957-0233/8/3/003 · Cited by 726
Exhaust gas sensors for automotive emission control
Riegel, J. (2002) · Solid State Ionics · doi:10.1016/s0167-2738(02)00329-6 · Cited by 379
Dai, J., Ogbeide, O., Macadam, N., Sun, Q., Yu, W., Li, Y., Su, B.-L., Hasan, T., Huang, X., & Huang, W. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00459a · Cited by 378
Lee, D.-D., & Lee, D.-S. (2001) · IEEE Sensors Journal · doi:10.1109/jsen.2001.954834 · Cited by 317
History and challenges of barium titanate: Part II
Vijatovic, M. M., Bobic, J. D., & Stojanovic, B. D. (2008) · Science of Sintering · doi:10.2298/sos0803235v · Cited by 272
Singh, M., Yadav, B. C., Ranjan, A., Kaur, M., & Gupta, S. K. (2017) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2016.10.018 · Cited by 244
High temperature oxygen sensors based on doped SrTiO3
Menesklou, W., Schreiner, H.-J., Härdtl, K. H., & Ivers-Tiffée, E. (1999) · Sensors and Actuators B: Chemical · doi:10.1016/s0925-4005(99)00218-x · Cited by 221
Research works printed but not linked: 9
- 11. Kumar, A.; Kingson, T.M.; Verma, R.P.; Mandal, R.; Dutta, S.; Chaulya, S.K.; Prasad, G. Application of Gas Monitoring Sensors in Underground Coal Mines and Hazardous Areas. Int. J. Comput. Technol. Electron. Eng. 2013, 3, 9-23.
- 46. Hsiao-Lin, W. Structure and Dielectric Properties of Perovskite-Barium Titanate (BaTiO 3 ); Submitted in Partial Fulfillment of Course Requirement for MatE 115; San Jose State University: San Jose, CA, USA, 2002; pp. 3-9.
- 48. Ertu g, B. The overview of the electrical properties of barium titanate. Am. J. Eng. Res. 2013, 2, 1-7.
- 70. Siskandar, R.; Yuliarto, B.; Zakki Fahmi, M. Application of Ba 0. 5 Sr 0. 5 TiO 3 (BST) Film Doped with 0%, 2%, 4% and 6% Con- centrations of RuO 2 as an Arduino Nano-Based Bad Breath Sensor. Chemosensors 2020, 8, 3.
- 78. Kajale, D.D.; Gaikwad, V.B.; Jain, G.H.; Khanna, P.K. Gas sensing performance of pure and modified SrTiO 3 thick film resistors. In Proceedings of the 3rd International Conference on Sensing Technology, Tainan, Taiwan, 30 November-3 December 2008; IEEE: Piscataway, NJ, USA, 2008; pp. 422-425.
- Le Pennec, F., Bernardini, S., Hijazi, M., Perrin-Pellegrino, C., Aguir, K., and Bendahan, M. (2020, January 21–25). Screen Printed BaTiO3 for CO2 Gas Sensor. Proceedings of the 5th International Conference on Advances in Sensors, Actuators, Metering and Sensing, Valencia, Spain.
- 100. Rudraswamy, S.B.; Basu, P.K.; Bhat, N.; Bhat, N. BaTiO 3 based Carbon-dioxide gas sensor. In Proceedings of the 2012 International Conference on Emerging Electronics, Mumbai, India, 15-17 December 2012; IEEE: Piscataway, NJ, USA, 2012; pp. 1-4. 123.
- Patil, 2018, Surface modified strontium doped barium titanate nanostructures H2S sensor, J. Emerg. Technol. Innov. Res., 5, 357
- 104. Patil, R.P.; Jain, G.H.; Gaikwad, V.B.; Kankrej, S.R.; Kulkarni, M.S. Surface modified strontium doped barium titanate nanostruc- tures H 2 S sensor. J. Emerg. Technol. Innov. Res. 2018, 5, 357-365. 134. Greenstein, M. IEEE Translations on Ultrasonics Ferroelectrics and Frequency Control; IEEE: Piscataway, NJ, USA, 1996; Volume 43. 135. Xu, Z.; Yan, D.; Xiao, D.; Yu, P.; Zhu, J. Dielectric enhancement of BaSrTi 1. 1 O 3 /BaSrTi 1 05 O 3 /BaSrTiO 3
Cited by
Review on Sol-Gel Synthesis of Perovskite and Oxide Nanomaterials
Navas, D., Fuentes, S., Castro-Alvarez, A., & Chavez-Angel, E. (2021) · Gels · doi:10.3390/gels7040275 · Cited by 421
Optical investigation and computational modelling of BaTiO3 for optoelectronic devices applications
Elmahgary, M. G., Mahran, A. M., Ganoub, M., & Abdellatif, S. O. (2023) · Scientific Reports · doi:10.1038/s41598-023-31652-2 · Cited by 118
Li, W., Sunarso, J., Yang, Y. Z., Chen, Y., Ge, C., Wang, W., Guo, Y., Ran, R., & Zhou, W. (2024) · Energy Reviews · doi:10.1016/j.enrev.2024.100085 · Cited by 91
A systematic review on 2D MoS2 for nitrogen dioxide (NO2) sensing at room temperature
Kumar, S., Meng, G., Mishra, P., Tripathi, N., & Bannov, A. G. (2022) · Materials Today Communications · doi:10.1016/j.mtcomm.2022.105045 · Cited by 57
Behera, D., Boudjelal, M., Batouche, M., Seddik, T., Hemidi, D., & Mukherjee, S. K. (2024) · International Journal of Quantum Chemistry · doi:10.1002/qua.27342 · Cited by 51
Metadata
- Authors
- Szafraniak, B., Fuśnik, Ł., Xu, J., Gao, F., Brudnik, A., & Rydosz, A.
- Affiliations
- AGH University of Krakow (PL)
- Northwestern Polytechnical University (CN)
- Corresponding author
- Fuśnik, Łukasz
- Venue
- Coatings
- Publisher
- MDPI AG
- Published
- 2021-02-04
- Volume
- 11
- Issue
- 2
- Pages
- 185
- ISSN
- 2079-6412 (ISSN-L)
- OpenAlex
- W3128451283
- Cited by
- 102
- References
- 122
- Citations by year
- 2026: 18 · 2025: 19 · 2024: 19 · 2023: 22 · 2022: 11 · 2021: 13
- FWCI
- 4.78
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Coatings (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- Funders
- Narodowe Centrum Badań i Rozwoju (Norway Grants 2014-2021 via the National Centre for Research and Development.)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Gas Sensing Nanomaterials and Sensors
- Physical Sciences › Materials Science › Materials Chemistry › Catalytic Processes in Materials Science
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electrical and Thermal Properties of Materials
- Keywords
- SrTiO3, barium titanate, barium strontium titanate, perovskite oxides, metal oxide semiconductors, gas sensors, NO2 gas sensing, magnetron sputtering, gas sensitivity, gas selectivity, gas stability
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Semiconducting Metal Oxides: SrTiO3, BaTiO3 and BaSrTiO3 in Gas-Sensing Applications: A Review. https://app.cochat.ai/papers/10.3390/coatings11020185
- The paper
- Szafraniak, B., Fuśnik, Ł., Xu, J., Gao, F., Brudnik, A., & Rydosz, A. (2021). Semiconducting Metal Oxides: SrTiO3, BaTiO3 and BaSrTiO3 in Gas-Sensing Applications: A Review. Coatings. https://doi.org/10.3390/coatings11020185
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.