Semiconducting Metal Oxides: SrTiO3, BaTiO3 and BaSrTiO3 in Gas-Sensing Applications: A Review
Open accessThe DOI matches its Crossref record; 122 of the 122 references it cites were found in a registry or an index.
Abstract
In this work, a broad overview in the field of strontium titanate (ST, SrTiO3)-, barium titanate (BT, BaTiO3)- and barium strontium titanate (BST, BaSrTiO3)-based gas sensors is presented and discussed. The above-mentioned materials are characterized by a perovskite structure with long-term stability and therefore are very promising materials for commercial gas-sensing applications. Within the last 20 years, the number of papers where ST, BT and BST materials were tested as gas-sensitive materials has ten times increased and therefore an actual review about them in this field has been expected by readers, who are researchers involved in gas-sensing applications and novel materials investigations, as well as industry research and development center members, who are constantly searching for gas-sensing materials exhibiting high 3S parameters (sensitivity, selectivity and stability) that can be adapted for commercial realizations. Finally, the NO2-sensing characteristics of the BST-based gas sensors deposited by the authors with the utilization of magnetron sputtering technology are presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures
![Figure 1 Selected statistical data of the global gas sensor market: ( a ) share of major sectors of the economy in the gas detector market for Europe; ( b ) global market for gas sensors broken down into regions-prediction; APAC-Asia Pacific, RoW-rest of the world, 2019 e-estimation, 2024 p-prediction [7,8]. Various materials have been validated for gas-sensing applications; however, the Figure 1. Selected statistical data of the global gas sensor market: ( a ) share of major sectors of the economy in the gas detector market for Europe; ( b ) global market for gas sensors broken down into regions-prediction; APAC-Asia Pacific, RoW-rest of the world, 2019 e-estimation, 2024 p-prediction [7,8].](https://figures.cochat.ai/paper-figures/ed726596efbe47a1a45ff6e990e33522/semiconducting-metal-oxides-srtio3-batio3-and-basrtio3-in-gas-sensing-figure-1.png)




![Figure 6 Examples of BaSrTiO3 gas sensors: ( a ) The Ba0.5 Sr 0.5 TiO 3 film doped with RuO2 model (the result of the copper wire installation) of a sensor for bad breath gas analysis. ( b ) The physical appearance of a Ba0.5 Sr0.5 TiO3 film doped with a RuO2 probe of a sensor for bad breath gas analysis. ( c ) The gas-sensing response of the BaSrTiO3 gas sensor under exposure to NH3 (30-110 ppm) at various RH concentrations. Reprinted with permission from [69] Copyright 2021 Elsevier. ( d ) Sketch of the gas reaction model of BST-based gas sensors to various NH3 concentrations. This model showed the impact of RH capillary condensation towards NH3 detection. Reprinted with permission from [69] Copyright 2021 Elsevier.](https://figures.cochat.ai/paper-figures/96aef8e901a842448d5a5073b9d67e77/semiconducting-metal-oxides-srtio3-batio3-and-basrtio3-in-gas-sensing-figure-6.png)

Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Vacuum deposition methods, such as thermal evaporation and magnetron sputtering, are crucial techniques for fabricating perovskite sensors, which are conducted in a vacuum environment to ensure high-quality and pure thin films [109, 133].”
From Design Strategies and Emerging Applications of Perovskite-Based Sensors (2025) · cites this paper as [133]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Detection of individual gas molecules adsorbed on graphene
Schedin, F., Geim, A. K., Morozov, S. V., Hill, E. W., Blake, P., Katsnelson, M. I., & Novoselov, K. S. (2007) · Nature Materials · doi:10.1038/nmat1967 · Cited by 8,028
Scott, J. F. (2000) · Springer Series in Advanced Microelectronics · doi:10.1007/978-3-662-04307-3 · Cited by 1,424
A review of piezoelectric polymers as functional materials for electromechanical transducers
Ramadan, K. S., Sameoto, D., & Evoy, S. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/3/033001 · Cited by 1,060 · cited 2×
“Application of the material - sensors - actuators - electro-optical devices - memory devices with random access - multilayer capacitors [27] - oxygen sensors [28] - temperature sensors [29] - cantilever base for various sensors [30] - ferroelectric memories [56] - electro-optical devices [57] - dielectric capacitors […”
BackgroundMoseley, P. T. (1997) · Measurement Science and Technology · doi:10.1088/0957-0233/8/3/003 · Cited by 726 · cited 2×
“and beverages [20], environmental protection [9,11,19], metals and chemicals [21,22], power stations [11], smart cities and building automation [10,11].”
BackgroundExhaust gas sensors for automotive emission control
Riegel, J. (2002) · Solid State Ionics · doi:10.1016/s0167-2738(02)00329-6 · Cited by 379 · cited 1×
“Nowadays, gas sensors are used in many applications [9–11], including mining [11,12], broadly understood industry [10,11], public safety [9–11], military [10], healthcare [10,11], consumer electronics [9,11,13], petrochemical [10,14], agriculture [10,11], water [11,14], medical [11,15–17], oil and gas [11,14], automot…”
BackgroundDai, J., Ogbeide, O., Macadam, N., Sun, Q., Yu, W., Li, Y., Su, B.-L., Hasan, T., Huang, X., & Huang, W. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00459a · Cited by 378
Lee, D.-D., & Lee, D.-S. (2001) · IEEE Sensors Journal · doi:10.1109/jsen.2001.954834 · Cited by 317 · cited 2×
“and beverages [20], environmental protection [9,11,19], metals and chemicals [21,22], power stations [11], smart cities and building automation [10,11].”
History and challenges of barium titanate: Part II
Vijatovic, M. M., Bobic, J. D., & Stojanovic, B. D. (2008) · Science of Sintering · doi:10.2298/sos0803235v · Cited by 272
Singh, M., Yadav, B. C., Ranjan, A., Kaur, M., & Gupta, S. K. (2017) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2016.10.018 · Cited by 244
High temperature oxygen sensors based on doped SrTiO3
Menesklou, W., Schreiner, H.-J., Härdtl, K. H., & Ivers-Tiffée, E. (1999) · Sensors and Actuators B: Chemical · doi:10.1016/s0925-4005(99)00218-x · Cited by 221 · cited 6×
“35O3 750–850 ◦C 2 5 O2 11 μm screen printing technique [77]”
BackgroundMethodInfluentialA Brief Overview on Automotive Exhaust Gas Sensors Based on Electroceramics
Moos, R. (2005) · International Journal of Applied Ceramic Technology · doi:10.1111/j.1744-7402.2005.02041.x · Cited by 210 · cited 2×
“and beverages [20], environmental protection [9,11,19], metals and chemicals [21,22], power stations [11], smart cities and building automation [10,11].”
BackgroundHumidity sensing properties of (Ba, Sr) TiO3 thin films grown by hydrothermal–electrochemical method
Agarwal, S., & Sharma, G. L. (2002) · Sensors and Actuators B: Chemical · doi:10.1016/s0925-4005(02)00109-0 · Cited by 209 · cited 2×
“Further work [104] focused on the influence of MgO doping (3% mol) on the structural and perceptible properties of BST0.”
BackgroundMethodElectrically tunable materials for microwave applications
Ahmed, A., Goldthorpe, I. A., & Khandani, A. K. (2015) · Applied Physics Reviews · doi:10.1063/1.4906255 · Cited by 193
Metal Oxide Nanomaterials for Chemical Sensors
(2013) · Springer eBooks · doi:10.1007/978-1-4614-5395-6 · Cited by 188 · cited 1×
“The first gas-sensing properties of semiconductor materials were reported in the 1920s, and in 2020, we celebrated the 100th anniversary of the first gas-sensing investigations of the gas atmosphere [1].”
Tripathi, K. M., Kim, T., Losic, D., & Tung, T. T. (2016) · Carbon · doi:10.1016/j.carbon.2016.08.040 · Cited by 171
IoT-Enabled Gas Sensors: Technologies, Applications, and Opportunities
Gomes, J. B. A., Rodrigues, J. J. P. C., Rabêlo, R. A. L., Kumar, N., & Kozlov, S. A. (2019) · Journal of Sensor and Actuator Networks · doi:10.3390/jsan8040057 · Cited by 167 · cited 1×
“Nowadays, gas sensors are used in many applications [9–11], including mining [11,12], broadly understood industry [10,11], public safety [9–11], military [10], healthcare [10,11], consumer electronics [9,11,13], petrochemical [10,14], agriculture [10,11], water [11,14], medical [11,15–17], oil and gas [11,14], automot…”
BackgroundMaking environmental sensors on plastic foil
Briand, D., Oprea, A., Courbat, J., & Bârsan, N. (2011) · Materials Today · doi:10.1016/s1369-7021(11)70186-9 · Cited by 160 · cited 1×
“Nowadays, gas sensors are used in many applications [9–11], including mining [11,12], broadly understood industry [10,11], public safety [9–11], military [10], healthcare [10,11], consumer electronics [9,11,13], petrochemical [10,14], agriculture [10,11], water [11,14], medical [11,15–17], oil and gas [11,14], automot…”
BackgroundMetal Oxide Nanostructures as Gas Sensing Devices
Eranna, G. (2016) · CRC Press eBooks · doi:10.1201/b11367 · Cited by 160 · cited 2×
“Various materials have been validated for gas-sensing applications; however, the main commonality is gas sensors based metal oxides, for example, n-type including tin dioxide (SnO2), tungsten t i ide (W 3), indium oxide (In2O3), gallium oxide (Ga2O3), vanadium oxide (V2O5) and iron oxide (Fe2O3) and p-type meta oxi s…”
Ferroelectric properties of dense nanocrystalline BaTiO3ceramics
Buscaglia, M. T., Buscaglia, V., Viviani, M., Petzelt, J., Savinov, M., Mitoşeriu, L., Testino, A., Nanni, P., Harnagea, C., Zhe Zhao, B., et al. (2004) · Nanotechnology · doi:10.1088/0957-4484/15/9/001 · Cited by 149 · cited 2×
“Type of structure simple cubic perovskite structure [24] cubic perovskite-type structure [46] perovskite structure [65,66]”
BackgroundHumidity sensing properties of BaTiO3 nanofiber prepared via electrospinning
He, Y., Zhang, T., Zheng, W., Wang, R., Liu, X., Xia, Y. Z., & Zhao, J. (2010) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2010.02.030 · Cited by 147 · cited 1×
“BaTiO3 25 ◦C 70 12 humidity nanofiber electrospinning [127]”
Giant permittivity and low dielectric loss of SrTiO3 ceramics sintered in nitrogen atmosphere
Wang, Z., Cao, M., Yao, Z., Zhang, Q., Song, Z., Hu, W., Xu, Q. G., Hao, H., Liu, H., & Yu, Z. (2014) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2014.01.015 · Cited by 146 · cited 3×
“Dielectric constant E0 E0 = 300 [25,42] dielectric constant depends on the type of synthesis, temperature, frequency and dopants [47,48] At RT E0 = 2570 [134] E0 = 420 [135]”
BackgroundThickness Dependence of Ferroelectricity in Heteroepitaxial BaTiO3 Thin Film Capacitors
Yanase, N., Abe, K., Fukushima, N., & Kawakubo, T. (1999) · Japanese Journal of Applied Physics · doi:10.1143/jjap.38.5305 · Cited by 145 · cited 2×
“Application of the material - sensors - actuators - electro-optical devices - memory devices with random access - multilayer capacitors [27] - oxygen sensors [28] - temperature sensors [29] - cantilever base for various sensors [30] - ferroelectric memories [56] - electro-optical devices [57] - dielectric capacitors […”
BackgroundLee, S. W., Han, J. H., Han, S., Lee, W., Jang, J. H., Seo, M., Kim, S. K., Dussarrat, C., Gatineau, J., Min, Y., et al. (2011) · Chemistry of Materials · doi:10.1021/cm2002572 · Cited by 143 · cited 5×
“Deposition method - magnetron sputtering [32,33] - atomic layer deposition (ALD) [34,35] - pulsed laser deposition (PLD) [36,37] - metal-organic chemical vapor deposition (MOCVD) [38,39] - laser chemical vapor deposition (LCVD) [40,41], - sol–gel method [42,43] - solid-state reaction [50] - sol–gel method [51] - hydro…”
BackgroundMethodInfluentialLi, W., Zhou, D., Xu, R., Wang, D., Su, J., Pang, L., Liu, W., & Chen, G. (2019) · ACS Applied Energy Materials · doi:10.1021/acsaem.9b00664 · Cited by 136
Nanostructured Gas Sensors for Medical and Health Applications: Low to High Dimensional Materials
Nasiri, N., & Clarke, C. (2019) · Biosensors · doi:10.3390/bios9010043 · Cited by 130 · cited 1×
“, Arlington Heights, IL, USA), was launched on the market for methane detection TGS109 [3]; in the 1990s, when nanostructure gas sensors were presented, with zero-dimensional (0D) nanoparticles, one-dimensional (1D) nanorods and nanowires, two-dimensional (2D) nanosheets and films and three-dimensional (3D) polycrysta…”
BackgroundFast oxygen sensors based on sputtered strontium titanate
Gerblinger, J., & Meixner, H. (1991) · Sensors and Actuators B Chemical · doi:10.1016/0925-4005(91)80183-k · Cited by 122
Sol–gel BaTiO3 thin film for humidity sensors
Yuk, J.-H., & Troczynski, T. (2003) · Sensors and Actuators B Chemical · doi:10.1016/s0925-4005(03)00371-x · Cited by 121
Boulos, M., Guillemet‐Fritsch, S., MATHIEU, F., DURAND, B., Lebey, T., & Bley, V. (2005) · Solid State Ionics · doi:10.1016/j.ssi.2005.02.024 · Cited by 110 · cited 2×
“Deposition method - magnetron sputtering [32,33] - atomic layer deposition (ALD) [34,35] - pulsed laser deposition (PLD) [36,37] - metal-organic chemical vapor deposition (MOCVD) [38,39] - laser chemical vapor deposition (LCVD) [40,41], - sol–gel method [42,43] - solid-state reaction [50] - sol–gel method [51] - hydro…”
MethodOhsato, H., Ohhashi, T., Nishigaki, S., Okuda, T., Sumiya, K., & Suzuki, S. (1993) · Japanese Journal of Applied Physics · doi:10.1143/jjap.32.4323 · Cited by 106 · cited 4×
“Deposition method - magnetron sputtering [32,33] - atomic layer deposition (ALD) [34,35] - pulsed laser deposition (PLD) [36,37] - metal-organic chemical vapor deposition (MOCVD) [38,39] - laser chemical vapor deposition (LCVD) [40,41], - sol–gel method [42,43] - solid-state reaction [50] - sol–gel method [51] - hydro…”
BackgroundMethodInfluentialSurface modified BaTiO3 thick film resistors as H2S gas sensors
Jain, G. H., Patil, L. A., Wagh, M. S., Patil, D. R., Patil, S. A., & Amalnerkar, D. (2005) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2005.11.031 · Cited by 106 · cited 1×
“Modified BaTiO3 350 ◦C 1119 2 H2S 65–70 μm screen printing technique [118] Modified BaTiO3 350 ◦C 31 2 NH3 65–70 μm screen printing technique [118]”
Surface Barrier Effects in Adsorption, Illustrated by Zinc Oxide
Morrison, S. R. (1955) · Advances in catalysis · doi:10.1016/s0360-0564(08)60529-5 · Cited by 105 · cited 1×
“Since that time, semiconductor-based gas sensors reached a number of pivot moments including in 1955, when oxygen detection in gas changes in the conductivity of a semiconductor (ZnO) was reported [2]; in 1968, when the first commercially available gas sensor, TGS (Taguchi Gas Sensor from Figaro Engineering Inc.”
BackgroundLiu, Q., Zhang, N.-C., Liu, F., Wang, H., & Liu, Z. (2013) · Optical Materials · doi:10.1016/j.optmat.2013.07.034 · Cited by 100 · cited 2×
“Application of the material - sensors - actuators - electro-optical devices - memory devices with random access - multilayer capacitors [27] - oxygen sensors [28] - temperature sensors [29] - cantilever base for various sensors [30] - ferroelectric memories [56] - electro-optical devices [57] - dielectric capacitors […”
BackgroundStructural, optical, and dielectric properties of sol-gel derived SrTiO3 thin films
Kamalasanan, M. N., Kumar, N. D., & Chandra, S. (1993) · Journal of Applied Physics · doi:10.1063/1.355230 · Cited by 98 · cited 4×
“Dielectric constant E0 E0 = 300 [25,42] dielectric constant depends on the type of synthesis, temperature, frequency and dopants [47,48] At RT E0 = 2570 [134] E0 = 420 [135]”
BackgroundMethodInfluentialA New Form of Nanosized SrTiO3 Material for Near-Human-Body Temperature Oxygen Sensing Applications
Hu, Y., Tan, O. K., Pan, J., & Yao, X. J. (2004) · The Journal of Physical Chemistry B · doi:10.1021/jp048973z · Cited by 93 · cited 2×
“35 2 O2 thick film physical high-energy ball milling technique [74]”
ResultBaSrTiO/sub 3/ interdigitated capacitors for distributed phase shifter applications
York, R. A., Speck, J. S., Taylor, T. R., Periaswamy, P., Erker, E. G., Nagra, A. S., & Liu, Y. (2000) · IEEE Microwave and Guided Wave Letters · doi:10.1109/75.888828 · Cited by 93
Chan, N. Y., Zhao, M. K., Huang, J., Au, K., Wong, M. H., Yau, H. M., Lu, W. M., Chen, Y., Ong, C. W., Chan, H. L. W., et al. (2014) · Advanced Materials · doi:10.1002/adma.201401597 · Cited by 92 · cited 1×
“LaAlO3/SrTiO3 RT, 80 ◦C 650, 4000 4 H2 thin film laser molecular beam epitaxy [112]”
BackgroundHu, Y., Tan, O. K., Pan, J., Huang, H., & Cao, W. (2004) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2004.10.053 · Cited by 91
Effect of BaTiO3 on the sensing properties of PVDF composite-based capacitive humidity sensors
Mallick, S., Ahmad, Z., Qadir, K. W., Rehman, A., Shakoor, A., Touati, F., & Al‐Muhtaseb, S. A. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.09.291 · Cited by 90 · cited 1×
“2416 4 humidity 150 nm mixing nanoparticles [117]”
BackgroundRaman, EPR and ethanol sensing properties of oxygen-Vacancies SrTiO 3- δ compounds
Trabelsi, H., Bejar, M., Dhahri, E., Graça, M. P. F., Valente, M. A., Soares, M. J., & Sobolev, N. A. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.07.128 · Cited by 85
Meng, X., Xu, J., Zhu, J., Zhang, P., Rydosz, A. M., Reece, M. J., & Gao, F. (2021) · Scripta Materialia · doi:10.1016/j.scriptamat.2020.113714 · Cited by 79 · cited 1×
“4TiO3 homemade target, recently presented in [108], and then copper dopants were deposited.”
BackgroundSelf-citationChemical coprecipitation of mixed (Ba+Ti) oxalates precursor leading to BaTiO3 powders
Potdar, H. S., Deshpande, S. B., & Date, S. K. (1999) · Materials Chemistry and Physics · doi:10.1016/s0254-0584(98)00262-4 · Cited by 76
Wet routes of high purity BaTiO3 nanopowders
Wang, L., Liu, L., Xue, D., Kang, H., & Liu, C. (2006) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2006.09.023 · Cited by 72 · cited 2×
“Deposition method - magnetron sputtering [32,33] - atomic layer deposition (ALD) [34,35] - pulsed laser deposition (PLD) [36,37] - metal-organic chemical vapor deposition (MOCVD) [38,39] - laser chemical vapor deposition (LCVD) [40,41], - sol–gel method [42,43] - solid-state reaction [50] - sol–gel method [51] - hydro…”
MethodStudy on CuO–BaTiO3 semiconductor CO2 sensor
Liao, B., Wei, Q., Wang, K., & Liu, Y. (2001) · Sensors and Actuators B Chemical · doi:10.1016/s0925-4005(01)00892-9 · Cited by 69
Optical properties of SrTiO 3 thin films by pulsed laser deposition
Du, Y. L., Zhang, M.-S., Wu, J., Kang, L., Yang, S., Wu, P., & Yin, Z. (2003) · Applied Physics A · doi:10.1007/s00339-002-1998-z · Cited by 69
Significantly improved energy storage properties of sol-gel derived Mn-modified SrTiO3 thin films
Diao, C., Li, H., Yang, Y., Hao, H., Yao, Z., & Liu, H. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.03.056 · Cited by 66 · cited 2×
“Deposition method - magnetron sputtering [32,33] - atomic layer deposition (ALD) [34,35] - pulsed laser deposition (PLD) [36,37] - metal-organic chemical vapor deposition (MOCVD) [38,39] - laser chemical vapor deposition (LCVD) [40,41], - sol–gel method [42,43] - solid-state reaction [50] - sol–gel method [51] - hydro…”
MethodDetecting low concentration of H2S gas by BaTiO3 nanoparticle-based sensors
Huang, H.-M., Li, H., Wang, X., & Guo, X. (2016) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2016.06.172 · Cited by 63 · cited 5×
“91 5 H2S 500 nm coprecipitation method [97]”
MethodInfluentialGreen carbon nanostructured quantum resistive sensors to detect volatile biomarkers
Tripathi, K. M., Sachan, A., Castro, M., Choudhary, V., Sonkar, S. K., & Feller, J. (2018) · Sustainable materials and technologies · doi:10.1016/j.susmat.2018.01.001 · Cited by 62
Chen, X. F., Zhu, W., & Tan, O. K. (2000) · Materials Science and Engineering B · doi:10.1016/s0921-5107(00)00484-0 · Cited by 60 · cited 4×
“33TiO3 205 ◦C 34 5 H2 200 nm RF magnetron co-sputtering [99]”
BackgroundMethodInfluentialTemperature characteristics of electrical properties of (Ba,Sr)TiO3 thick film humidity sensors
Holc, J., Slunčko, J., & Hrovat, M. (1995) · Sensors and Actuators B Chemical · doi:10.1016/0925-4005(94)01566-z · Cited by 60
A new process for fabricating CO2-sensing layers based on BaTiO3 and additives
Lee, M.-S., & Meyer, J.-U. (2000) · Sensors and Actuators B Chemical · doi:10.1016/s0925-4005(00)00447-0 · Cited by 60 · cited 6×
“Reprinted with permission from [93] Copyright 2021 Elsevier.”
BackgroundMethodInfluentialA low temperature nano-structured SrTiO3 thick film oxygen gas sensor
Hu, Y., Tan, O. K., Cao, W., & Zhu, W. (2004) · Ceramics International · doi:10.1016/j.ceramint.2003.12.068 · Cited by 60 · cited 3×
“Moreover, the experimental results showed that the sensing property of the synthesized SrTiO3 sensors with an annealing temperature of 400 ◦C is much better than the commercial SrTiO3 sensors (both milled and not milled materials) [73].”
BackgroundMethodResultInfluentialAraghi, M. E. A., Shaban, N., & Bahar, M. (2016) · Materials Science-Poland · doi:10.1515/msp-2016-0020 · Cited by 60 · cited 2×
“Application of the material - sensors - actuators - electro-optical devices - memory devices with random access - multilayer capacitors [27] - oxygen sensors [28] - temperature sensors [29] - cantilever base for various sensors [30] - ferroelectric memories [56] - electro-optical devices [57] - dielectric capacitors […”
BackgroundInfluentialBaTiO3 nanostructures for H2S gas sensor: Influence of band-gap, size and shape on sensing mechanism
Patil, R. S., More, P. V., Jain, G. H., Khanna, P. K., & Gaikwad, V. B. (2017) · Vacuum · doi:10.1016/j.vacuum.2017.08.008 · Cited by 60
Rydosz, A. M., & Szkudlarek, A. (2015) · Sensors · doi:10.3390/s150820069 · Cited by 58 · cited 1×
“The deposition system for co-sputtering was previously presented in [109].”
MethodSelf-citationRydosz, A. M., Brudnik, A., & Staszek, K. (2019) · Materials · doi:10.3390/ma12060877 · Cited by 58
Self-citationCho, W., & Hamada, E. (1998) · Journal of Alloys and Compounds · doi:10.1016/s0925-8388(97)00446-5 · Cited by 57 · cited 2×
“Deposition method - magnetron sputtering [32,33] - atomic layer deposition (ALD) [34,35] - pulsed laser deposition (PLD) [36,37] - metal-organic chemical vapor deposition (MOCVD) [38,39] - laser chemical vapor deposition (LCVD) [40,41], - sol–gel method [42,43] - solid-state reaction [50] - sol–gel method [51] - hydro…”
MethodRydosz, A. M., Szkudlarek, A., Ziąbka, M., Domanski, K., Maziarz, W., & Pisarkiewicz, T. (2015) · IEEE Sensors Journal · doi:10.1109/jsen.2015.2496212 · Cited by 57
Self-citationSchultz, A. M., Brown, T. D., Buric, M., Lee, S., Gerdes, K., & Ohodnicki, P. R. (2015) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2015.07.046 · Cited by 56 · cited 5×
“Other advantages low cost and strong stability in thermal and chemical atmospheres [26,42] fiber optic evanescent-wave hydrogen sensors [83] operating solid oxide fuel cell (SOFC) [83] microwave-based gas sensors [84] large electro-optic coefficients, positive coefficient of resistivity (PTCR) [49] high thermal and ch…”
BackgroundMethodInfluentialSelvarajan, S., Alluri, N. R., Chandrasekhar, A., & Kim, S. (2016) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2016.12.006 · Cited by 56 · cited 1×
“BT-NH2 NPs RT 5 6 cysteine 50 μm solid-state reaction method [120]”
MethodResistive donor-doped SrTiO3 sensors: I, basic model for a fast sensor response
Meyer, R., & Waser, R. M. (2004) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2004.04.004 · Cited by 55 · cited 1×
“Therefore, a limited point defect approach was used in this paper, only for electrons and strontium vacancies [72].”
MethodOzone gas sensor based on nanocrystalline SrTi1−Fe O3 thin films
Mastelaro, V. R., Zílio, S. C., da Silva, L. F., Pelissari, P. I. B. G. B., Bernardi, M. I. B., Guerin, J., & Aguir, K. (2013) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2013.02.068 · Cited by 51
Wang, Z., Kugler, V. M., Helmersson, U., Konofaos, N., Evangelou, E. K., Nakao, S., & Jin, P. (2001) · Applied Physics Letters · doi:10.1063/1.1398321 · Cited by 51 · cited 3×
“Among various possibilities to deposit SrTiO3 such as magnetron sputtering [32,33], Figure 1.”
BackgroundMethodOxygen sensitivity of SrTiO3 thin film prepared using atomic layer deposition
Hara, T., & Ishiguro, T. (2008) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2008.12.026 · Cited by 51 · cited 5×
“Deposition method - magnetron sputtering [32,33] - atomic layer deposition (ALD) [34,35] - pulsed laser deposition (PLD) [36,37] - metal-organic chemical vapor deposition (MOCVD) [38,39] - laser chemical vapor deposition (LCVD) [40,41], - sol–gel method [42,43] - solid-state reaction [50] - sol–gel method [51] - hydro…”
BackgroundMethodInfluentialFerroelectric Properties of Mechanically Synthesized Nanosized Barium Titanate
Stojanović, B. D., Jovalekić, Č., Vukotić, V., Simoes, A. Z., & Varela, J. A. (2005) · Ferroelectrics · doi:10.1080/00150190590965424 · Cited by 48 · cited 2×
“Deposition method - magnetron sputtering [32,33] - atomic layer deposition (ALD) [34,35] - pulsed laser deposition (PLD) [36,37] - metal-organic chemical vapor deposition (MOCVD) [38,39] - laser chemical vapor deposition (LCVD) [40,41], - sol–gel method [42,43] - solid-state reaction [50] - sol–gel method [51] - hydro…”
MethodNonlinear optical properties in SrTiO3 thin films by pulsed laser deposition
Deng, Y., Du, Y. L., Zhang, M. S., Han, J., & Yin, Z. (2005) · Solid State Communications · doi:10.1016/j.ssc.2005.04.031 · Cited by 46 · cited 9×
“5TiO3 330 ◦C 57.57 5 H2S thin film pulse laser deposition (PLD) technique [70] Ba0.”
BackgroundMethodInfluentialSorocki, J., Rydosz, A. M., & Staszek, K. (2020) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2020.128710 · Cited by 45
Self-citationStudy on the Characteristics of Ag Doped CuO-BaTiO3 CO2 Sensors
Jiao, Z., Chen, F., Su, R. Z., Huang, X., Liu, W., & Liu, J. (2002) · Sensors · doi:10.3390/s20900366 · Cited by 44 · cited 1×
“59 7 CO2 thick film conventional sintering method [124]”
MethodBaTiO3–CuO sputtered thin film for carbon dioxide detection
Mandayo, G. G., González, F., Rivas, I., Ayerdi, I., & Herrán, J. (2006) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2006.04.056 · Cited by 41 · cited 14×
“Deposition method - magnetron sputtering [32,33] - atomic layer deposition (ALD) [34,35] - pulsed laser deposition (PLD) [36,37] - metal-organic chemical vapor deposition (MOCVD) [38,39] - laser chemical vapor deposition (LCVD) [40,41], - sol–gel method [42,43] - solid-state reaction [50] - sol–gel method [51] - hydro…”
BackgroundMethodInfluentialPatil, R. S., Hiragond, C. B., Jain, G. H., Khanna, P. K., Gaikwad, V. B., & More, P. V. (2019) · Vacuum · doi:10.1016/j.vacuum.2019.04.047 · Cited by 41 · cited 1×
“Sensitivity effect to propane [76] propen [76] NO [76] O2 [77] O3 [78] CO [79] H2S [80] CO2 [81] volatile organic compounds (VOC), such as ethanol [82] CO [90] CO2 [94] NO2 [95] NH3 [95] LPG [96] H2 [96] H2S [96,97] Humidity [98] NOx [123] NH3 [68,69,101,102] H2S [68,70,100] H2 [99] Humidity [104–106] NO2 [100,107] LP…”
Xu, Z., Yan, D., Xiao, D., Yu, P., & Zhu, J. (2012) · Ceramics International · doi:10.1016/j.ceramint.2012.08.006 · Cited by 39 · cited 1×
“Dielectric constant E0 E0 = 300 [25,42] dielectric constant depends on the type of synthesis, temperature, frequency and dopants [47,48] At RT E0 = 2570 [134] E0 = 420 [135]”
BackgroundStructural and gas sensing behavior of nanocrystalline BaTiO3 based liquid petroleum gas sensors
Chaudhari, G. N., Bambole, D. R., & Bodade, A. B. (2006) · Vacuum · doi:10.1016/j.vacuum.2006.03.026 · Cited by 38 · cited 2×
“Sensitivity effect to propane [76] propen [76] NO [76] O2 [77] O3 [78] CO [79] H2S [80] CO2 [81] volatile organic compounds (VOC), such as ethanol [82] CO [90] CO2 [94] NO2 [95] NH3 [95] LPG [96] H2 [96] H2S [96,97] Humidity [98] NOx [123] NH3 [68,69,101,102] H2S [68,70,100] H2 [99] Humidity [104–106] NO2 [100,107] LP…”
BackgroundStaszek, K., Szkudlarek, A., Kawa, M., & Rydosz, A. M. (2019) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2019.126699 · Cited by 37
Self-citationMixed Oxide Capacitor of BaTiO3–PbO as a New Type CO2 Gas Sensor
Ishihara, T., Kometani, K., Hashida, M., & Takita, Y. (1990) · Chemistry Letters · doi:10.1246/cl.1990.1163 · Cited by 36 · cited 1×
“The gas-sensing behavior for CO2 with the utilization of BST-based gas sensors has been studied as well, for example, by the utilization of BST and CuO [91], PbO [92] and LaCl3 [93].”
MethodPatil, L. A., Suryawanshi, D. N., Pathan, I. G., & Patil, D. G. (2014) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2013.12.048 · Cited by 36 · cited 1×
“BaTiO3 350 ◦C 303 2 LPG thin film spray pyrolysis techniques [119]”
MethodGas sensing characteristics of BaTiO3-based ceramics
Park, K., & Seo, D.-H. (2004) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2003.11.031 · Cited by 35 · cited 3×
“001TiO3 400 ◦C 15 7 CO 1 mm adding graphite powders [90] BaTiO3 25 ◦C 3.”
BackgroundDesign of Low Cost Gas Sensor Based on SrTiO3 and BaTiO3 Films
Hodak, S. K., Supasai, T., Wisitsoraat, A., & Hodak, J. H. (2010) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2010.2800 · Cited by 34 · cited 2×
“BaTiO3/ SrTiO3 250–350 ◦C 10–100 1 C2H5OH 400 nm sol–gel method [111] Cu mol.”
Patil, R. S., Gaikwad, S. S., Karanjekar, A. N., Khanna, P. K., Jain, G. H., Gaikwad, V. B., More, P. V., & Bisht, N. (2020) · Materials Today Chemistry · doi:10.1016/j.mtchem.2019.100240 · Cited by 34
GLAD Magnetron Sputtered Ultra-Thin Copper Oxide Films for Gas-Sensing Application
Rydosz, A. M., Dyndał, K., Andrysiewicz, W., Grochala, D., & Marszalek, K. W. (2020) · Coatings · doi:10.3390/coatings10040378 · Cited by 34
Self-citationModeling of hydrocarbon sensors based on p-type semiconducting perovskites
Sahner, K., & Moos, R. (2006) · Physical Chemistry Chemical Physics · doi:10.1039/b612965j · Cited by 33 · cited 2×
“Hydrocarbon sensing results were presented by the same group in 2007 [76] with utilization of a nanoscaled SrTi1−xFexO3−δ-based sensor, where two novel synthesis methods, at that time, were validated, i.”
MethodNovel ammonia-sensing phenomena in sol–gel derived Ba0.5Sr0.5TiO3 thin films
Roy, S. C., Sharma, G., Bhatnagar, M. C., & Samanta, S. B. (2005) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2005.02.030 · Cited by 31 · cited 1×
“5TiO3 270 ◦C 60 1 40 1 30 1 NH3 150 nm 320 nm 480 nm sol–gel method [103]”
Electronic Noses Application to Food Analysis Using Metal Oxide Sensors: A Review
Zohora, S. E., & Hundewale, N. (2013) · Cited by 31
Oxygen-vacancy-related giant permittivity and ethanol sensing response in SrTiO3- ceramics
Trabelsi, H., Bejar, M., Dhahri, E., Valente, M. A., & Graça, M. P. F. (2018) · Physica E Low-dimensional Systems and Nanostructures · doi:10.1016/j.physe.2018.12.025 · Cited by 31 · cited 4×
“[82] presented the ethanol-sensing response of a SrTiO3−g-based gas sensor fabricated by a solid-state reaction enhanced in a thermally activated process.”
BackgroundInfluentialGas sensing properties of Cu and Cr activated BST thick films
Jain, G. H., & Patil, L. A. (2006) · Bulletin of Materials Science · doi:10.1007/bf02704143 · Cited by 30 · cited 4×
“4 4 H2S 65–70 μm screen printing technique [132]”
MethodInfluentialJoshi, S. S., Antolasic, F., Manorama, S. V., Bhargava, S. K., & Ippolito, S. J. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b04453 · Cited by 30
Fiber Bragg grating temperature sensor of cladding with SrTiO 3 thin film by pulsed laser deposition
Cheng, P., Wang, L., Pan, Y., Yan, H., Gao, D., Wang, J., & Zhang, H. (2019) · Laser Physics · doi:10.1088/1555-6611/aaf635 · Cited by 30
Ma, J. H., Huang, Z., Meng, X., Liu, S., Zhang, X., Sun, J., Xue, J., Chu, J., & Li, J. (2006) · Journal of Applied Physics · doi:10.1063/1.2168029 · Cited by 25 · cited 3×
“Among various possibilities to deposit SrTiO3 such as magnetron sputtering [32,33], Figure 1.”
BackgroundMethodElectrodeposited and Sol-gel Precipitated p-type SrTi1-xFexO3-δ Semiconductors for Gas Sensing
Sahner, K., Gouma, P., & Moos, R. (2007) · Sensors · doi:10.3390/s7091871 · Cited by 25 · cited 8×
“In 2006, the authors fabricated a hydrocarbons sensor for exhaust gases based on semiconducting doped SrTiO3 for on-board diagnosis [75].”
BackgroundMethodInfluentialpH dependent coprecipitated oxalate precursors – a thermal study of barium titanate
Prasadarao, A. V., Suresh, M., & Komarneni, S. (1999) · Materials Letters · doi:10.1016/s0167-577x(99)00035-x · Cited by 24 · cited 2×
“Deposition method - magnetron sputtering [32,33] - atomic layer deposition (ALD) [34,35] - pulsed laser deposition (PLD) [36,37] - metal-organic chemical vapor deposition (MOCVD) [38,39] - laser chemical vapor deposition (LCVD) [40,41], - sol–gel method [42,43] - solid-state reaction [50] - sol–gel method [51] - hydro…”
MethodElectro-optical properties of barium titanate films epitaxially grown on silicon
Abel, S., Caimi, D., Sousa, M., Stöferle, T., Rossel, C., Marchiori, C., Chelnokov, A., & Fompeyrine, J. (2012) · SPIE Proceedings · doi:10.1117/12.908772 · Cited by 24
Electroless deposition of BaTiO3 nanocubes for electrochemical sensing
He, X., Hu, C., Xi, Y., Wan, B., & Xia, C. (2008) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2008.11.002 · Cited by 21 · cited 1×
“BaTiO3 RT 116 3 H2O2 1 μm electroless deposition method [116]”
MethodOxygen Sensing Properties of SrTiO3 Thin Films
Hara, T., Ishiguro, T., Wakiya, N., & Shinozaki, K. (2008) · Japanese Journal of Applied Physics · doi:10.1143/jjap.47.7486 · Cited by 20 · cited 11×
“SrTiO3 RT 41 6 O2 50 nm pulsed laser deposition (PLD) [28]”
BackgroundMethodInfluentialŽagar, K., Hernández-Ramírez, F., Prades, J. D., Morante, J. R., Rečnik, A., & Čeh, M. (2011) · Nanotechnology · doi:10.1088/0957-4484/22/38/385501 · Cited by 19 · cited 1×
“8 10 humidity nanorods sol–gel electrophoretic deposition [126]”
BackgroundMultilayer Structure of Reduced Graphene Oxide and Copper Oxide as a Gas Sensor
Pisarkiewicz, T., Maziarz, W., Małolepszy, A., Stobiński, L., Michon, D., & Rydosz, A. M. (2020) · Coatings · doi:10.3390/coatings10111015 · Cited by 19 · cited 1×
“The gas-sensing measurement setup was previously presented in [110].”
MethodSelf-citationHC-sensor for exhaust gases based on semiconducting doped SrTiO3 for On-Board Diagnosis
Sahner, K., Fleischer, M., Mágori, E., Meixner, H., Deerberg, J., & Moos, R. (2005) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2005.08.005 · Cited by 17 · cited 2×
“Reprinted with permission from [89] Copyright 2021 Elsevier.”
BackgroundMethodJouhannaud, J., Rossignol, J., & Stuerga, D. (2007) · Journal of Physics Conference Series · doi:10.1088/1742-6596/76/1/012043 · Cited by 17 · cited 2×
“Other advantages low cost and strong stability in thermal and chemical atmospheres [26,42] fiber optic evanescent-wave hydrogen sensors [83] operating solid oxide fuel cell (SOFC) [83] microwave-based gas sensors [84] large electro-optic coefficients, positive coefficient of resistivity (PTCR) [49] high thermal and ch…”
BackgroundLow-temperature capacitive sensor based on perovskite oxides
Zaza, F., Orio, G., Serra, E., Caprioli, F., & Pasquali, M. (2015) · AIP conference proceedings · doi:10.1063/1.4922560 · Cited by 16 · cited 10×
“Sensitivity effect to propane [76] propen [76] NO [76] O2 [77] O3 [78] CO [79] H2S [80] CO2 [81] volatile organic compounds (VOC), such as ethanol [82] CO [90] CO2 [94] NO2 [95] NH3 [95] LPG [96] H2 [96] H2S [96,97] Humidity [98] NOx [123] NH3 [68,69,101,102] H2S [68,70,100] H2 [99] Humidity [104–106] NO2 [100,107] LP…”
BackgroundMethodInfluentialRoom temperature ammonia sensing with barium strontium titanate under humid air background
Simion, C. E., Sackmann, A., Teodorescu, V. S., Ciobota, C. F., & Stănoiu, A. (2015) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2015.07.045 · Cited by 15 · cited 4×
“NH3-sensing characteristics were measured at room temperature as well [69].”
BackgroundMethodInfluentialStructure, ferroelectric and gas sensing properties of sol–gel derived (Ba,Sr)(Ti,Zr)O3 thin films
Kumar, M., Rani, S., Bhatnagar, M. C., & Roy, S. C. (2007) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2007.08.010 · Cited by 15 · cited 1×
“Sensitivity effect to propane [76] propen [76] NO [76] O2 [77] O3 [78] CO [79] H2S [80] CO2 [81] volatile organic compounds (VOC), such as ethanol [82] CO [90] CO2 [94] NO2 [95] NH3 [95] LPG [96] H2 [96] H2S [96,97] Humidity [98] NOx [123] NH3 [68,69,101,102] H2S [68,70,100] H2 [99] Humidity [104–106] NO2 [100,107] LP…”
Annealing Effects on Sensitivity of Atomic-Layer-Deposited SrTiO3-Based Oxygen Sensors
Hara, T., Ishiguro, T., & Shinozaki, K. (2010) · Japanese Journal of Applied Physics · doi:10.1143/jjap.49.09ma15 · Cited by 15
NOx Sensing Properties of Barium Titanate Thin Films
Sharma, S., Sharma, A., Tomar, M., Puri, N. K., & Gupta, V. (2014) · Procedia Engineering · doi:10.1016/j.proeng.2014.11.347 · Cited by 14
Stănoiu, A., Piticescu, R. M., Simion, C. E., Ciobota, C. F., Florea, O. G., Teodorescu, V. S., Osiceanu, P., Sobeţkii, A., & Badilita, V. (2018) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2018.03.013 · Cited by 14
Nanostructured Cobalt Doped Barium Strontium Titanate Thin Films with Potential in CO2 Detection
Ciobota, C. F., Piticescu, R. M., Neagoe, C., Tudor, I. A., Matei, A., Drăguț, D. V., Sobeţkii, A., Anghel, E. M., Stănoiu, A., Simion, C. E., et al. (2020) · Materials · doi:10.3390/ma13214797 · Cited by 14 · cited 1×
“Co-doped BaSrTiO3 RT 35 3 CO2 thin film RF sputtering technique [130]”
MethodIrzaman, I., Siskandar, R., Yuliarto, B., Fahmi, M. Z., & Ferdiansjah (2019) · Chemosensors · doi:10.3390/chemosensors8010003 · Cited by 13
Synthesis of SrTiO 3 Nanopowder by Sol-Gel-Hydrothemal Method for Gas Sensing Application
Kajale, D. D., Patil, G. E., Gaikwad, V. B., Shinde, S. D., Chavan, D. N., Pawar, N. K., Shirsath, S. R., & Jain, G. H. (2012) · International Journal on Smart Sensing and Intelligent Systems · doi:10.21307/ijssis-2017-487 · Cited by 12
BaTiO3 Based Nanostructures for Humidity Sensing Applications
Soderžnik, K. Ž., Fàbrega, C., Hernández-Ramírez, F., Prades, J. D., & Čeh, M. (2019) · International Symposium on Sensor Science (I3S) · doi:10.3390/proceedings2019015009 · Cited by 12 · cited 4×
“In [98], the authors presented results on BaTiO3 nanoframes and TiO2-BaTiO3 nanotubes tested under various humidity concentrations (the samples were tested at RH from 15% to 95% at room temperature).”
BackgroundMethodInfluentialX-Band Phased Array Antenna Using Ferroelectric (Ba,Sr)TiO3 Coplanar Waveguide Phase Shifter
Moon, S. E., Ryu, H. C., Kwak, M. H., Kim, Y. T., Lee, S., & Kang, K. (2005) · ETRI Journal · doi:10.4218/etrij.05.0105.0024 · Cited by 11 · cited 2×
“Type of structure simple cubic perovskite structure [24] cubic perovskite-type structure [46] perovskite structure [65,66]”
BackgroundFarahani, H., Wagiran, R., Yurchenko, O., & Urban, G. A. (2018) · EUROSENSORS Conference (EUROSENSORS) · doi:10.3390/proceedings2131007 · Cited by 10
A novel creation of thread-based ammonia gas sensors for wearable wireless security system
Seesaard, T., Seaon, S., Khunarak, C., Lorwongtragool, P., & Kerdcharoen, T. (2014) · International Conference on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology (ECTI-CON) · doi:10.1109/ecticon.2014.6839727 · Cited by 9 · cited 2×
“and beverages [20], environmental protection [9,11,19], metals and chemicals [21,22], power stations [11], smart cities and building automation [10,11].”
SrTiO3-Based Microfabricated Oxygen Sensors
Hara, T., & Ishiguro, T. (2009) · Japanese Journal of Applied Physics · doi:10.1143/jjap.48.09ka17 · Cited by 9
Fabrication and electromechanical actuation of epitaxial SrTiO3(0 0 1) microcantilevers
Biasotti, M., Pellegrino, L., Buzio, R., Bellingeri, E., Bernini, C., Siri, A. S., & Marré, D. (2013) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/23/3/035031 · Cited by 9 · cited 2×
“Application of the material - sensors - actuators - electro-optical devices - memory devices with random access - multilayer capacitors [27] - oxygen sensors [28] - temperature sensors [29] - cantilever base for various sensors [30] - ferroelectric memories [56] - electro-optical devices [57] - dielectric capacitors […”
BackgroundHigh-speed epitaxial growth of SrTiO 3 films on MgO substrates by laser chemical vapor deposition
Chen, J., Ito, A., & Goto, T. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.03.100 · Cited by 9
Tin Dioxide Thin Film with UV-enhanced Acetone Detection in Microwave Frequency Range
Rydosz, A. M., Staszek, K., Brudnik, A., & Gruszczyński, S. (2019) · Micromachines · doi:10.3390/mi10090574 · Cited by 9
Self-citationGas sensing performance of barium strontium titanate thick film resistors
Jain, G. H., & Patil, L. A. (2007) · Journal of Physics Conference Series · doi:10.1088/1742-6596/76/1/012049 · Cited by 8 · cited 4×
“[101] proposed novel ammonia-sensing phenomena of Ba0.”
InfluentialDielectric properties of SrTiO3 ceramics synthesis by hybrid method
Pongthippitak, B., Wongtha, P., Reabroy, P., Kunsuwan, P., & Thountom, S. (2018) · Journal of Physics Conference Series · doi:10.1088/1742-6596/1144/1/012162 · Cited by 8 · cited 2×
“Application of the material - sensors - actuators - electro-optical devices - memory devices with random access - multilayer capacitors [27] - oxygen sensors [28] - temperature sensors [29] - cantilever base for various sensors [30] - ferroelectric memories [56] - electro-optical devices [57] - dielectric capacitors […”
BackgroundShreiber, D., Cole, M. W., Enriquez, E., Hirsch, S., Ngo, E., Hubbard, C., Ivill, M. P., & Chen, C. (2014) · Journal of Applied Physics · doi:10.1063/1.4894811 · Cited by 7 · cited 4×
“Deposition method - magnetron sputtering [32,33] - atomic layer deposition (ALD) [34,35] - pulsed laser deposition (PLD) [36,37] - metal-organic chemical vapor deposition (MOCVD) [38,39] - laser chemical vapor deposition (LCVD) [40,41], - sol–gel method [42,43] - solid-state reaction [50] - sol–gel method [51] - hydro…”
BackgroundMethodInfluentialMarques, A. (2009) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT) · Cited by 6
Chen, J., Ito, A., & Goto, T. (2020) · Vacuum · doi:10.1016/j.vacuum.2020.109424 · Cited by 6 · cited 4×
“Deposition method - magnetron sputtering [32,33] - atomic layer deposition (ALD) [34,35] - pulsed laser deposition (PLD) [36,37] - metal-organic chemical vapor deposition (MOCVD) [38,39] - laser chemical vapor deposition (LCVD) [40,41], - sol–gel method [42,43] - solid-state reaction [50] - sol–gel method [51] - hydro…”
BackgroundMethodInfluentialGas Sensing Performance of Pure and Modified BST Thick Film Resistor
Jain, G. H., GAIKWAD, V. B., Kajale, D. D., CHAUDHARI, R. M., PATIL, R. L., PAWAR, N. K., Deore, M. K., Shinde, S. D., & Patil, L. A. (2008) · DOAJ (DOAJ: Directory of Open Access Journals) · Cited by 6
Elaboration and characterization of doped barium titanate films for gas sensing
Romh, M. A. E., Fasquelle, D., Députier, S., & Mascot, M. (2014) · AIP conference proceedings · doi:10.1063/1.4901652 · Cited by 4 · cited 3×
“Application of the material - sensors - actuators - electro-optical devices - memory devices with random access - multilayer capacitors [27] - oxygen sensors [28] - temperature sensors [29] - cantilever base for various sensors [30] - ferroelectric memories [56] - electro-optical devices [57] - dielectric capacitors […”
BackgroundMethodShastri, N. M., Raval, A. V., & Joshi, V. G. (2020) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/814/1/012036 · Cited by 4
Tuned sensitivity towards H2S and NH3 with Cu doped barium strontium titanate materials
Simion, C. E., Sackmann, A., Teodorescu, V. S., Ruşti, C. F., Piticescu, R. M., & Stănoiu, A. (2014) · AIP conference proceedings · doi:10.1063/1.4901664 · Cited by 3 · cited 5×
“5%-doped BaSrTiO3 200 ◦C 15 2 H2S thick film hydrothermal method [68]”
BackgroundInfluentialMattina, F. L. (2008) · Zurich Open Repository and Archive (University of Zurich) · doi:10.5167/uzh-15890 · Cited by 1
Research works printed but not linked: 9
- 11. Kumar, A.; Kingson, T.M.; Verma, R.P.; Mandal, R.; Dutta, S.; Chaulya, S.K.; Prasad, G. Application of Gas Monitoring Sensors in Underground Coal Mines and Hazardous Areas. Int. J. Comput. Technol. Electron. Eng. 2013, 3, 9-23.
- 46. Hsiao-Lin, W. Structure and Dielectric Properties of Perovskite-Barium Titanate (BaTiO 3 ); Submitted in Partial Fulfillment of Course Requirement for MatE 115; San Jose State University: San Jose, CA, USA, 2002; pp. 3-9.
- 48. Ertu g, B. The overview of the electrical properties of barium titanate. Am. J. Eng. Res. 2013, 2, 1-7.
- 70. Siskandar, R.; Yuliarto, B.; Zakki Fahmi, M. Application of Ba 0. 5 Sr 0. 5 TiO 3 (BST) Film Doped with 0%, 2%, 4% and 6% Con- centrations of RuO 2 as an Arduino Nano-Based Bad Breath Sensor. Chemosensors 2020, 8, 3.
- 78. Kajale, D.D.; Gaikwad, V.B.; Jain, G.H.; Khanna, P.K. Gas sensing performance of pure and modified SrTiO 3 thick film resistors. In Proceedings of the 3rd International Conference on Sensing Technology, Tainan, Taiwan, 30 November-3 December 2008; IEEE: Piscataway, NJ, USA, 2008; pp. 422-425.
- Le Pennec, F., Bernardini, S., Hijazi, M., Perrin-Pellegrino, C., Aguir, K., and Bendahan, M. (2020, January 21–25). Screen Printed BaTiO3 for CO2 Gas Sensor. Proceedings of the 5th International Conference on Advances in Sensors, Actuators, Metering and Sensing, Valencia, Spain.
- 100. Rudraswamy, S.B.; Basu, P.K.; Bhat, N.; Bhat, N. BaTiO 3 based Carbon-dioxide gas sensor. In Proceedings of the 2012 International Conference on Emerging Electronics, Mumbai, India, 15-17 December 2012; IEEE: Piscataway, NJ, USA, 2012; pp. 1-4. 123.
- Patil, 2018, Surface modified strontium doped barium titanate nanostructures H2S sensor, J. Emerg. Technol. Innov. Res., 5, 357
- 104. Patil, R.P.; Jain, G.H.; Gaikwad, V.B.; Kankrej, S.R.; Kulkarni, M.S. Surface modified strontium doped barium titanate nanostruc- tures H 2 S sensor. J. Emerg. Technol. Innov. Res. 2018, 5, 357-365. 134. Greenstein, M. IEEE Translations on Ultrasonics Ferroelectrics and Frequency Control; IEEE: Piscataway, NJ, USA, 1996; Volume 43. 135. Xu, Z.; Yan, D.; Xiao, D.; Yu, P.; Zhu, J. Dielectric enhancement of BaSrTi 1. 1 O 3 /BaSrTi 1 05 O 3 /BaSrTiO 3
Cited by
Review on Sol-Gel Synthesis of Perovskite and Oxide Nanomaterials
Navas, D., Fuentes, S., Castro-Alvarez, A., & Chavez-Angel, E. (2021) · Gels · doi:10.3390/gels7040275 · Cited by 421
Optical investigation and computational modelling of BaTiO3 for optoelectronic devices applications
Elmahgary, M. G., Mahran, A. M., Ganoub, M., & Abdellatif, S. O. (2023) · Scientific Reports · doi:10.1038/s41598-023-31652-2 · Cited by 118
Li, W., Sunarso, J., Yang, Y. Z., Chen, Y., Ge, C., Wang, W., Guo, Y., Ran, R., & Zhou, W. (2024) · Energy Reviews · doi:10.1016/j.enrev.2024.100085 · Cited by 91
A systematic review on 2D MoS2 for nitrogen dioxide (NO2) sensing at room temperature
Kumar, S., Meng, G., Mishra, P., Tripathi, N., & Bannov, A. G. (2022) · Materials Today Communications · doi:10.1016/j.mtcomm.2022.105045 · Cited by 57
Behera, D., Boudjelal, M., Batouche, M., Seddik, T., Hemidi, D., & Mukherjee, S. K. (2024) · International Journal of Quantum Chemistry · doi:10.1002/qua.27342 · Cited by 51
Metadata
- Authors
- Szafraniak, B., Fuśnik, Ł., Xu, J., Gao, F., Brudnik, A., & Rydosz, A.
- Affiliations
- AGH University of Krakow (PL)
- Northwestern Polytechnical University (CN)
- Corresponding author
- Fuśnik, Łukasz
- Venue
- Coatings
- Publisher
- MDPI AG
- Published
- 2021-02-04
- Volume
- 11
- Issue
- 2
- Pages
- 185
- ISSN
- 2079-6412 (ISSN-L)
- OpenAlex
- W3128451283
- Cited by
- 102
- References
- 122
- Citations by year
- 2026: 18 · 2025: 19 · 2024: 19 · 2023: 22 · 2022: 11 · 2021: 13
- FWCI
- 4.78
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Coatings (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- Funders
- Narodowe Centrum Badań i Rozwoju (Norway Grants 2014-2021 via the National Centre for Research and Development.)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Gas Sensing Nanomaterials and Sensors
- Physical Sciences › Materials Science › Materials Chemistry › Catalytic Processes in Materials Science
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electrical and Thermal Properties of Materials
- Keywords
- SrTiO3, barium titanate, barium strontium titanate, perovskite oxides, metal oxide semiconductors, gas sensors, NO2 gas sensing, magnetron sputtering, gas sensitivity, gas selectivity, gas stability
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.