An Overview on Corrosion-Resistant Coating Technologies in Biomass/Waste-to-Energy Plants in Recent Decades
Open accessThe DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Abstract
Highly efficient electric power generation from biomass/waste fuels becomes an important worldwide issue to prevent global warming. In these plants, severe high-temperature corrosion and erosion-corrosion damage occur in boiler tubes influenced by HCl, SOx gases, and chlorides as contaminants in fuels. Coating technologies become important as a countermeasure for such damage, because of the easy maintenance, cost performance, and ease of application on various materials. In severe corrosive conditions of boilers, formation of dense, homogenous, and tough coating layers, as well as protective oxide layers of corrosion-resistant materials, are important. In the last 30 years, materials and coating processes applied in shop and on site have progressed based on many field observations and the consideration of deterioration mechanisms in order to maintain long lifetimes in the plants. Furthermore, new innovative coatings are now being developed by using advanced precise control, nanotechnologies, etc. This paper introduces recent trends of advanced coating developments and applications, such as weld-overlay, cladding, thermal spray coating, and slurry coating for biomass/waste boilers. Furthermore, the evaluation results of deterioration mechanisms and lifetime of coatings, and the future issue for innovative coatings, are presented.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Practical estimation of erosion damage caused by solid particle impact
Oka, Y. I., Okamura, K., & Yoshida, T. (2005) · Wear · doi:10.1016/j.wear.2005.01.039 · Cited by 900 · cited 3×
“Impact angle dependence of erosion rates relating erosion mechanisms in materials having various hardness and toughness [34].”
BackgroundInfluentialKawahara, Y. (2002) · Corrosion Science · doi:10.1016/s0010-938x(01)00058-0 · Cited by 184 · cited 3×
“The addition of alloying elements such as Mo, Nb(Cb), Si to Ni–Cr–Fe alloys is considered to be effective in reducing the corrosion rate, as based on field corrosion tests [22].”
BackgroundInfluentialSelf-citationZahs, A., Spiegel, M., & Grabke, H. (1999) · Materials and Corrosion · doi:10.1002/(sici)1521-4176(199910)50:10<561::aid-maco561>3.0.co;2-l · Cited by 131 · cited 2×
“This type of corrosion is referred to as “molten salt induced corrosion,” because the gaseous corrosion reaction becomes active, when the amount of deposits increases and a part of the deposits melts [32].”
BackgroundKawahara, Y. (2007) · Journal of Thermal Spray Technology · doi:10.1007/s11666-006-9012-5 · Cited by 102 · cited 5×
“Deterioration mechanisms of thermal spray coating layer in severe corrosive environment [6].”
BackgroundMethodInfluentialSelf-citationThe role of combustion synthesis in the formation of slurry aluminization
Galetz, M. C., Montero, X., Mollard, M., Günthner, M., Pedraza, F., & Schütze, M. (2013) · Intermetallics · doi:10.1016/j.intermet.2013.08.002 · Cited by 79 · cited 1×
“The good results have been reported [17].”
Kawahara, Y., & Kira, M. (1997) · CORROSION · doi:10.5006/1.3280466 · Cited by 46
Self-citationKawahara, Y. (2006) · Materials and Corrosion · doi:10.1002/maco.200503895 · Cited by 39 · cited 4×
“Schematic illustration of corrosion mechanisms in Ni–Cr–Mo–(Nb, Fe) alloy [33].”
BackgroundMethodInfluentialSelf-citationProduction of Nanocrystalline Ni-20Cr Coatings for High-Temperature Applications
Kumar, M., Singh, H., & Singh, N. (2014) · Journal of Thermal Spray Technology · doi:10.1007/s11666-014-0055-8 · Cited by 31
Advanced Coatings on Furnace Wall Tubes
MATSUBARA, Y., Sochi, Y., Tanabe, M., & TAKEYA, A. (2007) · Journal of Thermal Spray Technology · doi:10.1007/s11666-007-9030-y · Cited by 27
Evaluation of New Corrosion-Resistant Superheater Tubing in High-Efficiency Waste-to-Energy Plants
Kawahara, Y., Nakamura, M., Tsuboi, H., & Yukawa, K.-I. (1998) · CORROSION · doi:10.5006/1.3284886 · Cited by 27 · cited 2×
“9 MPa boilers for corrosion resistance and cost performance, because the corrosion resistance between Ni–Cr–Fe alloys and Ni base alloys is not so different under the steam conditions below 450 °C, as shown in Figure 13 [23].”
BackgroundSelf-citation
Research works printed but not linked: 8
- Kawahara, 2006, Formation and Break-down of Protective Oxides Layer in High Temperature Corrosion Resistant Materials Used in Environmental and Energy Equipment, Semin. Text Jpn. Inst. Met., 99, 46
- Lai, G., and Hulsizer, P. (1999, January 15–17). Performance of corrosion-resistant weld overlays in power boilers & kraft recovery boilers. Proceedings of the Stainless Steel World/99 Conference, Den Haag, The Netherlands.
- Wilson, A., Forsberg, U., Lunderg, M., and Nylöf, L. (1999, January 15–17). Composite Tubes in Waste Incineration Boilers. Proceedings of the Stainless Steel World/99, Den Haag, The Netherlands.
- Kawahara, 2009, Improvement of Durability and Evaluation Technologies for Refractories in Waste Incinerator and Industrial Boiler, TAIKABUTU, 61, 320
- Lea, 1949, The oxidation of silicon-carbide refractory materials, J. Soc. Glass Technol., 33, 27
- Iemura, 1979, Refractory materials for refuse incinerator, Shinagawa Giho, 23, 73
- Somiya, S. (2013). Handbook of Advanced Ceramics, Academic Press/Elsevier. [2nd ed.].
- Ohoba, 2008, Application and Life-time Evaluation of Metal Spray Coatings for Fire-Side Corrosion of Boiler Waterwall, J. Jpn. Boiler Assoc., 348, 14
Cited by
Sadeghi, E., Markocsan, N., & Joshi, S. V. (2019) · Journal of Thermal Spray Technology · doi:10.1007/s11666-019-00938-1 · Cited by 164
Errington, E., Guo, M., & Heng, J. Y. Y. (2022) · Green Chemistry · doi:10.1039/d2gc01433e · Cited by 46
Wang, G., Liu, H., Chen, T., Zhang, X., Li, H., Yu, Y., & Yao, H. (2021) · Corrosion Science · doi:10.1016/j.corsci.2021.109592 · Cited by 36
High Temperature Corrosion Resistant and Anti-slagging Coatings for Boilers: A Review
Khantisopon, K., Singh, S., Jitputti, J., Berndt, C. C., & Ang, A. S. M. (2024) · High Temperature Corrosion of Materials · doi:10.1007/s11085-024-10251-0 · Cited by 30
Qu, Z., & Tian, X. (2024) · Coatings · doi:10.3390/coatings14111391 · Cited by 24
Metadata
- Authors
- Kawahara, Y.
- Affiliations
- DAI-ICHI HIGH Frequency Co., Ltd. (Japan) (JP)
- Corresponding author
- Kawahara, Yuuzou
- ORCID
- Kawahara, Yuuzou
- Venue
- Coatings
- Publisher
- MDPI AG
- Published
- 2016-08-05
- Volume
- 6
- Issue
- 3
- Pages
- 34
- ISSN
- 2079-6412 (ISSN-L)
- OpenAlex
- W2476770397
- Cited by
- 62
- References
- 20
- Citations by year
- 2026: 12 · 2025: 8 · 2024: 11 · 2023: 5 · 2022: 10 · 2021: 5 · 2020: 5 · 2019: 3 · 2017: 3
- FWCI
- 2.44
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Coatings (publishedVersion, cc-by)
- Topics
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › High-Temperature Coating Behaviors
- Physical Sciences › Engineering › Mechanical Engineering › Surface Treatment and Coatings
- Physical Sciences › Materials Science › Materials Chemistry › Corrosion Behavior and Inhibition
- Keywords
- corrosion protection coatings, biomass boiler, waste-to-energy plants, high-temperature corrosion, erosion-corrosion, boiler tubes, overlay welding, cladding, thermal spray coatings, slurry coating, coating lifetime
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: An Overview on Corrosion-Resistant Coating Technologies in Biomass/Waste-to-Energy Plants in Recent Decades. https://app.cochat.ai/papers/10.3390/coatings6030034
- The paper
- Kawahara, Y. (2016). An Overview on Corrosion-Resistant Coating Technologies in Biomass/Waste-to-Energy Plants in Recent Decades. Coatings. https://doi.org/10.3390/coatings6030034
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.