Numerical and Experimental Investigation on the Abrasive Flow Machining of Artificial Knee Joint Surface
Open accessThe DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
The titanium alloy artificial knee joint is used extensively in the current medical industry due to its distinct characteristics and properties that are like the real human knee joint, but it does need to be polished to improve its performance and service life before it can be used. Due to the complicated surface profile, the traditional abrasive flow machining technique cannot achieve a good surface finish offering uniformity and quality. Thus, in this paper, a proper constrained flow channel is designed to conduct the abrasive flow machining of the titanium alloy artificial knee joint surface to overcome these issues. A numerical study is first conducted to explore the distribution of abrasive flow velocity and pressure near the target surface in the constrained flow channel by using the COMSOL Multiphysics software, and it is found from the distribution of the dimensionless material removal rate on the target surface that the exchange of the abrasive flow inlet and outlet during the machining process is recommended to improve the surface finish uniformity. Then, the corresponding experiments are conducted to analyze the surface morphology before and after the abrasive flow machining process. It is found that the surface roughness of the target surface decreases from approximately 394 nm to 171 nm with good uniformity as well. Therefore, the proposed abrasive flow machining method with a properly designed constrained flow channel is useful for the rough polishing and fine finishing of the titanium alloy artificial joint.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Xie, X., Zhang, L., Zhu, L., Li, Y., Hong, T., Yang, W., & Shan, X. (2023) · Coatings · doi:10.3390/coatings13050859 · Cited by 49
Self-citationQian, H., Chen, M., Qi, Z., Teng, Q., Qi, H., Zhang, L., & Shan, X. (2023) · Crystals · doi:10.3390/cryst13030428 · Cited by 33
Self-citationWang, Y., Wang, Z., Ni, P., Wang, D., Lu, Y., Lu, H., Guo, S., & Chen, Z. (2023) · Coatings · doi:10.3390/coatings13040758 · Cited by 13
Cited by
Xie, X., Zhang, L., Zhu, L., Li, Y., Hong, T., Yang, W., & Shan, X. (2023) · Coatings · doi:10.3390/coatings13050859 · Cited by 49
“The machinery industry has seen rapid development in recent years, leading to increased demands for improved performance in mechanical parts in various industries such as defense, transportation, power energy, and engineering machinery [1–5].”
BackgroundSelf-citationQian, H., Chen, M., Qi, Z., Teng, Q., Qi, H., Zhang, L., & Shan, X. (2023) · Crystals · doi:10.3390/cryst13030428 · Cited by 33
Self-citationWang, Y., Wang, Z., Ni, P., Wang, D., Lu, Y., Lu, H., Guo, S., & Chen, Z. (2023) · Coatings · doi:10.3390/coatings13040758 · Cited by 13
Yuan, H., Yang, W., Zhang, L., & Hong, T. (2023) · Coatings · doi:10.3390/coatings13030581 · Cited by 12
Self-citation
Metadata
- Authors
- Ji, R., Qi, Z., Chen, J., Zhang, L., Lin, K., Lu, S., & Li, Y.
- Venue
- Crystals
- Publisher
- MDPI AG
- Published
- 2023-03-02
- Volume
- 13
- Issue
- 3
- Pages
- 430
- ISSN
- 2073-4352 (ISSN-L)
- OpenAlex
- W4322770460
- Cited by
- 32
- References
- 3
- FWCI
- 2.35
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Numerical and Experimental Investigation on the Abrasive Flow Machining of Artificial Knee Joint Surface. https://app.cochat.ai/papers/10.3390/cryst13030430
- The paper
- Ji, R., Qi, Z., Chen, J., Zhang, L., Lin, K., Lu, S., & Li, Y. (2023). Numerical and Experimental Investigation on the Abrasive Flow Machining of Artificial Knee Joint Surface. Crystals. https://doi.org/10.3390/cryst13030430
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.