A Review of Early Fault Diagnosis Approaches and Their Applications in Rotating Machinery
Open accessThe DOI matches its Crossref record; 176 of the 176 references it cites were found in a registry or an index.
Abstract
Rotating machinery is widely applied in various types of industrial applications. As a promising field for reliability of modern industrial systems, early fault diagnosis (EFD) techniques have attracted increasing attention from both academia and industry. EFD is critical to provide appropriate information for taking necessary maintenance actions and thereby prevent severe failures and reduce financial losses. A massive amounts of research work has been conducted in last two decades to develop EFD techniques. This paper reviews and summarizes the research works on EFD of gears, rotors, and bearings. The main purpose of this paper is to serve as a guidemap for researchers in the field of early fault diagnosis. After a brief introduction of early fault diagnosis techniques, the applications of EFD of rotating machine are reviewed in two aspects: fault frequency-based methods and artificial intelligence-based methods. Finally, a summary and some new research prospects are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures







Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The check wasn’t confident either way, so it gives no verdict — never disputed.
In the citing paper
“WVD is not directly used by researchers to determine the time-frequency structures of signals because of the cross-term interference problem [93].”
From Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review (2021) · cites this paper as [93]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Huang, N. E., Shen, Z., Long, S. R., Wu, M. C., Shih, H. H., Zheng, Q., Yen, N.-C., Tung, C. C., & Liu, H. H. (1998) · Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rspa.1998.0193 · Cited by 23,564
Nearest neighbor pattern classification
Cover, T., & Hart, P. (1967) · IEEE Transactions on Information Theory · doi:10.1109/tit.1967.1053964 · Cited by 16,936
Variational Mode Decomposition
Dragomiretskiy, K., & Zosso, D. (2014) · IEEE Transactions on Signal Processing · doi:10.1109/tsp.2013.2288675 · Cited by 9,184
ENSEMBLE EMPIRICAL MODE DECOMPOSITION: A NOISE-ASSISTED DATA ANALYSIS METHOD
WU, Z., & HUANG, N. E. (2009) · Advances in Adaptive Data Analysis · doi:10.1142/s1793536909000047 · Cited by 8,715
The wavelet transform, time-frequency localization and signal analysis
Daubechies, I. (1990) · IEEE Transactions on Information Theory · doi:10.1109/18.57199 · Cited by 6,483
The Nature of Statistical Learning Theory
Sain, S. R. (1996) · Technometrics · doi:10.1080/00401706.1996.10484565 · Cited by 5,434
Entropy-based algorithms for best basis selection
Coifman, R. R., & Wickerhauser, M. V. (1992) · IEEE Transactions on Information Theory · doi:10.1109/18.119732 · Cited by 3,188
Gilles, J. (2013) · IEEE Transactions on Signal Processing · doi:10.1109/tsp.2013.2265222 · Cited by 2,210
Artificial intelligence for fault diagnosis of rotating machinery: A review
Liu, R., Yang, B., Zio, E., & Chen, X. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.02.016 · Cited by 2,188 · cited 1×
“As an emerging field in industrial applications and an effective solution for fault recognition, AI-based early fault diagnosis method has been receiving increasing attention from academia and industry [3].”
BackgroundLogistic regression and Artificial Neural Network Classification models: A methodology review
Dreiseitl, S., & Ohno-Machado, L. (2002) · Journal of Biomedical Informatics · doi:10.1016/s1532-0464(03)00034-0 · Cited by 2,177 · cited 1×
“The weights and threshold value of the network are constantly adjusted by back propagation, and they help make the network error sum of squares minimum [59].”
BackgroundLarge Margin DAG's for Multiclass Classification
Platt, J. C., Cristianini, N., & Shawe-Taylor, J. S. (1999) · ePrints Soton (University of Southampton) · Cited by 1,889
A review on empirical mode decomposition in fault diagnosis of rotating machinery
Lei, Y., Lin, J., He, Z., & Zuo, M. J. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2012.09.015 · Cited by 1,886
Fast computation of the kurtogram for the detection of transient faults
Antoni, J. (2007) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2005.12.002 · Cited by 1,601
The spectral kurtosis: a useful tool for characterising non-stationary signals
Antoni, J. (2006) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2004.09.001 · Cited by 1,441
A confidence limit for the empirical mode decomposition and Hilbert spectral analysis
Huang, N. E., Wu, M.-L. C., Long, S. R., Shen, S. S. P., Qu, W., Gloersen, P., & Fan, K. L. (2003) · Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rspa.2003.1123 · Cited by 1,212
Feng, Z., Liang, M., & Chu, F. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.01.017 · Cited by 998 · cited 1×
“The wavelet transform (WT), which employs the wavelet basis function, was proposed by Morlet in 1974 [41].”
MethodThe local mean decomposition and its application to EEG perception data
Smith, J. S. (2005) · Journal of The Royal Society Interface · doi:10.1098/rsif.2005.0058 · Cited by 983
Single-layer learning revisited: a stepwise procedure for building and training a neural network
Knerr, S., Personnaz, L., & Dreyfus, G. (1990) · Neurocomputing · doi:10.1007/978-3-642-76153-9_5 · Cited by 828
Dynamic modeling of gearbox faults: A review
Liang, X., Zuo, M. J., & Feng, Z. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.05.024 · Cited by 534
A review of vibration-based techniques for helicopter transmission diagnostics
Samuel, P. D., & Pines, D. J. (2005) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2004.02.058 · Cited by 518
Bin, G. F., Gao, J. J., Li, X. J., & Dhillon, B. S. (2012) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2011.08.002 · Cited by 499
Fast computation of the spectral correlation
Antoni, J., Xin, G., & Hamzaoui, N. (2017) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.01.011 · Cited by 432
Enhanced broadband piezoelectric energy harvesting using rotatable magnets
Zhou, S., Cao, J., Erturk, A., & Lin, J. (2013) · Applied Physics Letters · doi:10.1063/1.4803445 · Cited by 365
Chen, J., Pan, J., Li, Z., Zi, Y., & Chen, X. (2016) · Renewable Energy · doi:10.1016/j.renene.2015.12.010 · Cited by 361
The Entropy Algorithm and Its Variants in the Fault Diagnosis of Rotating Machinery: A Review
Li, Y., Wang, X., Liu, Z., Liang, X., & Si, S. (2018) · IEEE Access · doi:10.1109/access.2018.2873782 · Cited by 318
Self-citationZhao, M., & Jia, X. (2017) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.02.036 · Cited by 304
Kedadouche, M., Thomas, M., & Tahan, A. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2016.02.049 · Cited by 295
An improved EEMD with multiwavelet packet for rotating machinery multi-fault diagnosis
Jiang, H., Li, C., & Li, H. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2012.12.010 · Cited by 275
Li, Y., Yang, Y., Li, G., Xu, M., & Huang, W. (2017) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2016.12.040 · Cited by 273
Self-citationMultivariate empirical mode decomposition and its application to fault diagnosis of rolling bearing
Lv, Y., Yuan, R., & Song, G. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2016.03.010 · Cited by 254
Saidi, L., Ben Ali, J., Bechhoefer, E., & Benbouzid, M. (2017) · Applied Acoustics · doi:10.1016/j.apacoust.2017.01.005 · Cited by 252
Bearing fault detection by one-dimensional convolutional neural networks
Eren, L. (2017) · Mathematical Problems in Engineering · doi:10.1155/2017/8617315 · Cited by 250 · cited 2×
“[169] put the raw vibration signals into a 1D convolutional neural network for a fast and accurate bearing fault detection.”
BackgroundWang, H., Chen, J., & Dong, G. (2014) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2014.04.006 · Cited by 246
Tse, P. W., & Wang, D. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.05.024 · Cited by 243
Li, Y., Xu, M., Liang, X., & Huang, W. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2650873 · Cited by 237
Self-citationLu, K., Jin, Y., Chen, Y., Yang, Y., Hou, L., Zhang, Z., Li, Z., & Fu, C. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.01.018 · Cited by 235
Rolling bearing diagnosing method based on Empirical Mode Decomposition of machine vibration signal
Dybała, J., & Zimroz, R. (2014) · Applied Acoustics · doi:10.1016/j.apacoust.2013.09.001 · Cited by 224
Cui, L., Huang, J., & Zhang, F. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2698359 · Cited by 223
Online sequential prediction of bearings imbalanced fault diagnosis by extreme learning machine
Mao, W., He, L., Yan, Y., & Wang, J. (2017) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2016.06.024 · Cited by 216
Wavelets and time-frequency analysis
Hess-Nielsen, N., & Wickerhauser, M. V. (1996) · Proceedings of the IEEE · doi:10.1109/5.488698 · Cited by 211
A New Feature Extraction Method Based on EEMD and Multi-Scale Fuzzy Entropy for Motor Bearing
Zhao, H., Sun, M., Deng, W., & Yang, X. (2016) · Entropy · doi:10.3390/e19010014 · Cited by 209
Li, Y., Li, G., Yang, Y., Liang, X., & Xu, M. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.12.008 · Cited by 193
Self-citationAutomatic bearing fault diagnosis based on one-class ν-SVM
Fernández-Francos, D., Martínez-Rego, D., Fontenla-Romero, O., & Alonso-Betanzos, A. (2013) · Computers & Industrial Engineering · doi:10.1016/j.cie.2012.10.013 · Cited by 185
EEMD-based multiscale ICA method for slewing bearing fault detection and diagnosis
Žvokelj, M., Zupan, S., & Prebil, I. (2016) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2016.01.046 · Cited by 184
Matching pursuit of an adaptive impulse dictionary for bearing fault diagnosis
Cui, L., Wang, J., & Lee, S. (2014) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2013.12.029 · Cited by 179
Early chatter identification based on an optimized variational mode decomposition
Yang, K., Wang, G., Dong, Y., Zhang, Q., & Sang, L. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.05.052 · Cited by 178
Igba, J., Alemzadeh, K., Durugbo, C., & Eiriksson, E. T. (2016) · Renewable Energy · doi:10.1016/j.renene.2016.01.006 · Cited by 177
Li, Y., Yang, Y., Wang, X., Liu, B., & Liang, X. (2018) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2018.04.036 · Cited by 177
Self-citationTime-frequency atoms-driven support vector machine method for bearings incipient fault diagnosis
Liu, R., Yang, B., Zhang, X., Wang, S., & Chen, X. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2015.12.020 · Cited by 176
Zhao, S., Liang, L., Xu, G., Wang, J., & Zhang, W. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.04.006 · Cited by 174
Entropy Based Fault Classification Using the Case Western Reserve University Data: A Benchmark Study
Li, Y., Wang, X., Si, S., & Huang, S. (2020) · IEEE Transactions on Reliability · doi:10.1109/tr.2019.2896240 · Cited by 173
Self-citationDu, Z., Chen, X., Zhang, H., & Yan, R. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2464297 · Cited by 170
Fault feature extraction of rolling element bearings using sparse representation
He, G., Ding, K., & Lin, H. (2016) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2015.12.020 · Cited by 167
Statistical Spectral Analysis for Fault Diagnosis of Rotating Machines
Ciabattoni, L., Ferracuti, F., Freddi, A., & Monteriu, A. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2762623 · Cited by 160
Hemmati, F., Orfali, W., & Gadala, M. S. (2016) · Applied Acoustics · doi:10.1016/j.apacoust.2015.11.003 · Cited by 159
Early Classification of Bearing Faults Using Morphological Operators and Fuzzy Inference
Raj, A., & Murali, N. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2188259 · Cited by 158
FAULT DIAGNOSIS OF ROTATING MACHINERY THROUGH VISUALISATION OF SOUND SIGNALS
Shibata, K., TAKAHASHI, A., & Shirai, T. (2000) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.1999.1255 · Cited by 152
A hierarchical method for multi-class support vector machines
Vural, V., & Dy, J. (2004) · doi:10.1145/1015330.1015427 · Cited by 149
A new wind turbine fault diagnosis method based on the local mean decomposition
Liu, W. Y., Zhang, W., Han, J., & Wang, G. F. (2012) · Renewable Energy · doi:10.1016/j.renene.2012.05.018 · Cited by 147
Fault detection analysis in rolling element bearing: A review
Gupta, P., & Pradhan, M. K. (2017) · Materials Today Proceedings · doi:10.1016/j.matpr.2017.02.054 · Cited by 147
Feng, Z., Zhou, Y., Zuo, M. J., Chu, F., & Chen, X. (2017) · Measurement · doi:10.1016/j.measurement.2017.02.031 · Cited by 146
Imaouchen, Y., Kedadouche, M., Alkama, R., & Thomas, M. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2016.05.009 · Cited by 145
Cheng, J., Yu, D., & Yang, Y. (2005) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2005.09.005 · Cited by 143
Li, Y., Feng, K., Liang, X., & Zuo, M. J. (2018) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2018.09.054 · Cited by 141
Self-citationChen, X.-H., Cheng, G., Shan, X.-L., Hu, X., Guo, Q., & Liu, H.-G. (2015) · Measurement · doi:10.1016/j.measurement.2015.05.007 · Cited by 140
Health Assessment of Rotating Machinery Using a Rotary Encoder
Zhao, M. J., & Lin, J. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2739689 · Cited by 140
Cui, L., Huang, J., Zhang, F., & Chu, F. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.09.043 · Cited by 129
Cui, L., Wu, N., Ma, C., & Wang, H. (2015) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2015.05.032 · Cited by 126
Dual serial vortex-induced energy harvesting system for enhanced energy harvesting
Zhou, S., & Wang, J. (2018) · AIP Advances · doi:10.1063/1.5038884 · Cited by 126
Wang, Y., Xue, C., Jia, X., & Peng, X. (2014) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2014.11.002 · Cited by 125
Jedliński, Ł., & Jonak, J. (2015) · Applied Soft Computing · doi:10.1016/j.asoc.2015.02.015 · Cited by 123
Li, Y., Liang, X., Xu, M., & Huang, W. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2016.10.013 · Cited by 123
Self-citationTabrizi, A. A., Garibaldi, L., Fasana, A., & Marchesiello, S. (2014) · Meccanica · doi:10.1007/s11012-014-9968-z · Cited by 119
Neighborhood size selection in the k-nearest-neighbor rule using statistical confidence
Wang, J., Neskovic, P., & Cooper, L. N. (2005) · Pattern Recognition · doi:10.1016/j.patcog.2005.08.009 · Cited by 118
Feng, Z., Zuo, M. J., Qu, J., Tian, T., & Liu, Z. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.05.016 · Cited by 115
Sparse representation based latent components analysis for machinery weak fault detection
Tang, H., Chen, J., & Dong, G. (2014) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2014.01.011 · Cited by 105
Jiang, F., Zhu, Z., & Li, W. (2018) · IEEE Access · doi:10.1109/access.2018.2851374 · Cited by 105
Jia, F., Lei, Y., Shan, H., & Lin, J. (2015) · Sensors · doi:10.3390/s151129363 · Cited by 103
Incipient fault feature extraction of rolling bearings based on the MVMD and Teager energy operator
Ma, J., Wu, J., & Wang, X. (2018) · ISA Transactions · doi:10.1016/j.isatra.2018.05.017 · Cited by 103
Yu, J., & Lv, J. (2017) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2017.2751878 · Cited by 98
Soleimani, A., & Khadem, S. E. (2015) · Chaos Solitons & Fractals · doi:10.1016/j.chaos.2015.06.018 · Cited by 97
A windowing and mapping strategy for gear tooth fault detection of a planetary gearbox
Liang, X., Zuo, M. J., & Liu, L. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2016.04.034 · Cited by 88
Dong, G., & Chen, J. (2012) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2012.06.008 · Cited by 87
Jin, X., & Chow, T. W. S. (2013) · Expert Systems with Applications · doi:10.1016/j.eswa.2013.04.024 · Cited by 86
Early fault detection and diagnosis in bearings for more efficient operation of rotating machinery
Brković, A., Gajic, D. G., Gligorijevic, J., Savić, I., Georgieva, O., & Gennaro, S. D. (2016) · Energy · doi:10.1016/j.energy.2016.08.039 · Cited by 86
Fan, W., Zhou, Q., Li, J., & Zhu, Z. (2018) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2017.2720177 · Cited by 86
Rahman, M. M., & Uddin, M. N. (2017) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2017.2691736 · Cited by 85
Multi-layer neural network with deep belief network for gearbox fault diagnosis
Chen, Z., Li, C., & Sánchez, R. (2015) · Journal of Vibroengineering · doi:10.21595/jve.2015.16039 · Cited by 83
Current Noise Cancellation for Bearing Fault Diagnosis Using Time Shifting
Dalvand, F., Dalvand, S., Sharafi, F., & PECHT, M. G. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2694397 · Cited by 83
Zhang, X., Wang, J., Liu, Z., & Wang, J. (2018) · ISA Transactions · doi:10.1016/j.isatra.2018.09.022 · Cited by 83
Siegel, D., Atat, H. A., Shauche, V., Liao, L., Snyder, J., & Lee, J. (2012) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2012.01.003 · Cited by 73
Early fault detection in automotive ball bearings using the minimum variance cepstrum
Park, C.-S., Choi, Y., & Kim, Y. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.02.017 · Cited by 73
A Patent Analysis of Prognostics and Health Management (PHM) Innovations for Electrical Systems
Liu, Z., Jia, Z. Y., Vong, C., Han, J., Yan, C. C., & PECHT, M. G. (2018) · IEEE Access · doi:10.1109/access.2018.2818114 · Cited by 73
Rolling element bearings diagnostics using the Symbolic Aggregate approXimation
Georgoulas, G., Karvelis, P. S., Λούτας, Θ., & Stylios, C. D. (2015) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2015.01.033 · Cited by 71
Detection of faults in rotating machinery using periodic time-frequency sparsity
Ding, Y., He, W., Chen, B., Zi, Y., & Selesnick, I. (2016) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2016.07.004 · Cited by 68
Application of the horizontal slice of cyclic bispectrum in rolling element bearings diagnosis
Zhou, Y., Chen, J., Dong, G., Xiao, W., & Wang, Z. Y. (2011) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2011.07.006 · Cited by 67
Kang, M., & Kim, J.-M. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.08.002 · Cited by 67
Sparse classification of rotating machinery faults based on compressive sensing strategy
Tang, G., Yang, Q., Wang, H., Luo, G., & Ma, J. (2015) · Mechatronics · doi:10.1016/j.mechatronics.2015.04.006 · Cited by 67
Li, Y., Xu, M., Yu, W., & Huang, W. (2016) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2016.2564078 · Cited by 66
Self-citationYang, D., Li, H., Hu, Y., Zhao, J., Xiao, H., & Lan, Y. (2016) · Renewable Energy · doi:10.1016/j.renene.2016.01.099 · Cited by 64
Health monitoring of cooling fan bearings based on wavelet filter
He, W. P., Miao, Q., Azarian, M. H., & PECHT, M. G. (2015) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2015.04.002 · Cited by 63
Periodically correlated random processes: Application in early diagnostics of mechanical systems
Javorskyj, I. M., Кравец, И. Б., Matsko, I., & Юзефович, Р. М. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2016.06.022 · Cited by 62
Merainani, B., Benazzouz, D., & Rahmoune, C. (2015) · Journal of Vibration and Control · doi:10.1177/1077546315597820 · Cited by 59
Wang, Y., He, Z., Xiang, J., & Zi, Y. (2011) · Mechanism and Machine Theory · doi:10.1016/j.mechmachtheory.2011.08.007 · Cited by 58
Shen, C., He, Q., Kong, F., & Tse, P. W.-T. (2012) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1177/0954406212460628 · Cited by 56
Sharma, V., & Parey, A. (2016) · Measurement · doi:10.1016/j.measurement.2016.04.076 · Cited by 55
Li, Y., Liang, X., Yang, Y., Xu, M., & Huang, W. (2017) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2017.2664599 · Cited by 55
Self-citationSpectral kurtosis based on AR model for fault diagnosis and condition monitoring of rolling bearing
Cong, F., Chen, J., & Dong, G. (2012) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-011-1029-0 · Cited by 54
Li, K., Chen, P., & Wang, H. (2012) · IEEE Sensors Journal · doi:10.1109/jsen.2012.2191402 · Cited by 51
An Improved Method Based on CEEMD for Fault Diagnosis of Rolling Bearing
Li, M., Wang, H., Tang, G., Yuan, H., & Yang, Y. (2014) · Advances in Mechanical Engineering · doi:10.1155/2014/676205 · Cited by 51
Rangel-Magdaleno, J., Peregrina-Barreto, H., Ramirez-Cortes, J., Morales-Caporal, R., & Cruz-Vega, I. (2016) · Shock and Vibration · doi:10.1155/2016/3530464 · Cited by 48
Wang, L., Cai, G., You, W., Huang, W., & Zhu, Z. (2017) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2017.2734198 · Cited by 48
Self-citationOnline feature learning for condition monitoring of rotating machinery
Martin-del-Campo, S., & Sandin, F. (2017) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2017.06.012 · Cited by 47
Wang, D., Guo, W. J., & Wang, X. (2013) · Applied Soft Computing · doi:10.1016/j.asoc.2013.05.015 · Cited by 46
Wu, C., Chen, T., Jiang, R., Ning, L., & Jiang, Z. (2017) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-015-1070-4 · Cited by 45 · cited 2×
“[163] used CWT to decompose the signal, then put wavelet coefficients into a tree kernel-based SVM to identify bearing faults.”
MethodWind Turbine Gearbox Fault Diagnosis Based on Improved EEMD and Hilbert Square Demodulation
Chen, H., Chen, P., Chen, W., Wu, C., Li, J., & Wu, J. (2017) · Applied Sciences · doi:10.3390/app7020128 · Cited by 43
Low Complexity Motor Current Signature Analysis Using Sub-Nyquist Strategy With Reduced Data Length
Naha, A., Samanta, A. K., Routray, A., & Deb, A. K. (2017) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2017.2737879 · Cited by 43
Novel detection of local tooth damage in gears by the wavelet bicoherence
Combet, F., Gelman, L., & LaPayne, G. (2011) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2011.07.002 · Cited by 42
Variable cosine windowing of intrinsic mode functions: Application to gear fault diagnosis
Parey, A., & Pachori, R. B. (2011) · Measurement · doi:10.1016/j.measurement.2011.11.001 · Cited by 42
Condition-based monitoring system for rolling element bearing using a generic multi-layer perceptron
de Almeida, L. F., Bizarria, J. W. P., Bizarria, F. C. P., & Mathias, M. H. (2014) · Journal of Vibration and Control · doi:10.1177/1077546314524260 · Cited by 42
Li, Q. '., Ji, X., & Liang, S. Y. (2017) · Entropy · doi:10.3390/e19070317 · Cited by 41
Cui, H., Qiao, Y., Yin, Y., & Hong, M. (2016) · Neurocomputing · doi:10.1016/j.neucom.2016.08.021 · Cited by 40
Rolling Bearing Diagnosing Method Based on Time Domain Analysis and Adaptive FuzzyC-Means Clustering
Fu, S., Liu, K., Xu, Y., & Liu, Y. (2016) · Shock and Vibration · doi:10.1155/2016/9412787 · Cited by 38
A frequency-shifted bispectrum for rolling element bearing diagnosis
Dong, G., Chen, J., & Zhao, F. (2014) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2014.11.015 · Cited by 37
Shen, C., Wang, D., Liu, Y., Kong, F., & Tse, P. W.-T. (2014) · Smart Structures and Systems · doi:10.12989/sss.2014.13.3.453 · Cited by 35
Geramifard, O., Xu, J., & Panda, S. K. (2013) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2013.06.005 · Cited by 33
Knowledge extraction using data mining for multi-class fault diagnosis of induction motor
Konar, P., Sil, J., & Chattopadhyay, P. (2015) · Neurocomputing · doi:10.1016/j.neucom.2015.04.040 · Cited by 33
Liao, Z., Song, L., Chen, P., & Zuo, S. (2017) · IEEE Sensors Journal · doi:10.1109/jsen.2017.2738152 · Cited by 33
Wang, H., Chen, J., & Dong, G. (2014) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1177/0954406214564692 · Cited by 31
Li, H., Xu, F., Liu, H., & Zhang, X. (2014) · Measurement · doi:10.1016/j.measurement.2014.12.032 · Cited by 30
A new fault diagnosis algorithm for helical gears rotating at low speed using an optical encoder
Shao, Y., Su, D., Al‐Habaibeh, A., & Yu, W. (2016) · Measurement · doi:10.1016/j.measurement.2016.07.013 · Cited by 30
Han, C.-F., He, H.-Q., Wei, C.-C., Horng, J., Chiu, Y.-L., Hwang, Y.-C., & Lin, J. F. (2018) · Measurement · doi:10.1016/j.measurement.2018.05.059 · Cited by 30
Chen, J., Zi, Y., He, Z., & Wang, X. (2012) · Science China Technological Sciences · doi:10.1007/s11431-012-4846-1 · Cited by 29
Kedadouche, M., Thomas, M., Tahan, A. S., & Guilbault, R. (2015) · Shock and Vibration · doi:10.1155/2015/959380 · Cited by 29
Cui, H., Qiao, Y., Yin, Y., & Hong, M. (2016) · Structural Health Monitoring · doi:10.1177/1475921716661310 · Cited by 28
Wang, D., Shen, C., & Tse, P. W.-T. (2013) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2013.07.021 · Cited by 26
Mei, J., Jia, J., Zeng, R., Zhou, B., & Zhao, H. (2016) · Measurement · doi:10.1016/j.measurement.2016.05.092 · Cited by 26
Industrial drive fault diagnosis through vibration analysis using wavelet transform
Jayakumar, K., & Thangavel, S. (2015) · Journal of Vibration and Control · doi:10.1177/1077546315606602 · Cited by 26
An Analysis of Deviations of Cylindrical Surfaces with the Use of Wavelet Transform
Stepien, K. S., & Makieła, W. (2013) · Metrology and Measurement Systems · doi:10.2478/mms-2013-0013 · Cited by 25
Fuzzy determination of informative frequency band for bearing fault detection
Li, C., de Oliveira, J. V., Sánchez, R., Cerrada, M., Zurita, G., & Cabrera, D. R. (2016) · Journal of Intelligent & Fuzzy Systems · doi:10.3233/ifs-162097 · Cited by 25
Fault detection via recurrence time statistics and one-class classification
Martínez‐Rego, D., Fontenla-Romero, Ó., Alonso‐Betanzos, A., & Príncipe, J. C. (2016) · Pattern Recognition Letters · doi:10.1016/j.patrec.2016.07.019 · Cited by 24
Ibrahim, G. R., Albarbar, A., Abouhnik, A., & Shnibha, R. (2013) · Measurement · doi:10.1016/j.measurement.2013.02.019 · Cited by 23
Moumene, I., & Ouelaa, N. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7436-0 · Cited by 22
Guo, Y., Zhang, Z., Cao, J., Gong, T., & Yang, W. (2017) · Measurement Science and Technology · doi:10.1088/1361-6501/aa9ef0 · Cited by 21
Cruz-Vega, I., Rangel‐Magdaleno, J., Ramírez-Cortés, J. M., & Barreto, H. P. (2017) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-017-0508-3 · Cited by 19
Detection of weak fault using sparse empirical wavelet transform for cyclic fault
Lu, Y., Xie, R., & Liang, S. Y. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-2553-1 · Cited by 19
Zhu, K., Xi-geng, S., & Xue, D. (2013) · Journal of Vibroengineering · doi:10.21595/jve.2013.14557 · Cited by 18
Romero, A., Lage, Y., Soua, S., Wang, B.-Q., & Gan, T. (2016) · Shock and Vibration · doi:10.1155/2016/6423587 · Cited by 17
Han, D., Su, X. M., & Shi, P. (2018) · Shock and Vibration · doi:10.1155/2018/4252438 · Cited by 17
Londoño, M. H., Cardona-Morales, O., Sierra-Alonso, E. F., Mejia-Henao, J. D., Orozco, A. A., & Castellanos-Dominguez, G. (2016) · Mathematical Problems in Engineering · doi:10.1155/2016/7906834 · Cited by 16
Dong, G., Chen, J., & Zhao, F. (2017) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4037419 · Cited by 16
Single point bearing fault diagnosis using simplified frequency model
Masmoudi, M. L., Etien, E., Moreau, S., & Sakout, A. (2016) · Electrical Engineering · doi:10.1007/s00202-016-0441-y · Cited by 14
Wu, Z., Zhang, Q., Wang, L., Cheng, L., & Zhou, J. (2018) · Entropy · doi:10.3390/e20110873 · Cited by 14
Tabrizi, A. A., Garibaldi, L., Fasana, A., & Marchesiello, S. (2015) · Shock and Vibration · doi:10.1155/2015/964805 · Cited by 13
Study on Fault Diagnosis of Rolling Bearing Based on Time-Frequency Generalized Dimension
Yuan, Y., Zhao, X. W., Fei, J., Zhao, Y., & Wang, J. (2015) · Shock and Vibration · doi:10.1155/2015/808457 · Cited by 13
Liu, H., Han, S., Yang, J., & Liu, S. (2017) · Journal of Vibroengineering · doi:10.21595/jve.2017.17727 · Cited by 13
Rajeswari, C., Balasubramaniam, S., Devendiran, S., & Manivannan, K. (2015) · Journal of Vibroengineering · doi:10.21595/jve.2015.15774 · Cited by 12
Gear damage diagnosis and classification based on support vector machines
Fan, Q., IKEJO, K., Nagamura, K., KAWADA, M., & Hashimoto, M. (2014) · Journal of Advanced Mechanical Design Systems and Manufacturing · doi:10.1299/jamdsm.2014jamdsm0021 · Cited by 11
Application of Optimal Morlet Wavelet Filter for Bearing Fault Diagnosis
Morsy, M. E., & Achtenová, G. (2015) · SAE International Journal of Passenger Cars - Mechanical Systems · doi:10.4271/2015-01-2178 · Cited by 10
Jeong, I.-K., Kang, M., Kim, J., Kim, J.-M., Ha, J.-M., & Choi, B.-K. (2015) · Shock and Vibration · doi:10.1155/2015/814650 · Cited by 10
Improving the performance of univariate control charts for abnormal detection and classification
Yiakopoulos, C. T., Koutsoudaki, M., Gryllias, K., & Antoniadis, I. A. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2016.09.036 · Cited by 10
Application of statistical parameters and discrete wavelet transform to gear damage diagnosis
Fan, Q., IKEJO, K., Nagamura, K., KAWADA, M., & Hashimoto, M. (2014) · Journal of Advanced Mechanical Design Systems and Manufacturing · doi:10.1299/jamdsm.2014jamdsm0013 · Cited by 8
A Novel Approach of Impulsive Signal Extraction for Early Fault Detection of Rolling Element Bearing
Hu, A., Jianfeng, L., Shangfei, S., & Ling, X. (2017) · Shock and Vibration · doi:10.1155/2017/9375491 · Cited by 8
Elasha, F., Mba, D., & Carcel, C. R. (2014) · Mechanisms and machine science · doi:10.1007/978-3-319-09918-7_19 · Cited by 7
A heterogeneous fault diagnosis method for bearings in gearbox
Chen, X., Xiao, L., Zhang, X., & Liu, Z. (2014) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1177/0954406214544727 · Cited by 7
Lv, Y., Luo, J., & Yi, C. (2017) · Shock and Vibration · doi:10.1155/2017/4896056 · Cited by 7
Gao, J., Wang, R., Zhang, R., & Li, Y. (2015) · Journal of the Brazilian Society of Mechanical Sciences and Engineering · doi:10.1007/s40430-015-0474-6 · Cited by 6
Self-citationDiagnosis for gear tooth surface damage by empirical mode decomposition in cyclic fatigue test
Fan, Q., IKEJO, K., Nagamura, K., KAWADA, M., & Hashimoto, M. (2014) · Journal of Advanced Mechanical Design Systems and Manufacturing · doi:10.1299/jamdsm.2014jamdsm0039 · Cited by 5
Study on a Novel Fault Diagnosis Method of Rolling Bearing in Motor
Xiu-mei, L., Deng, W., Zhao, H., & Zheng, G. (2016) · Recent Patents on Mechanical Engineering · doi:10.2174/2212797609666160408154213 · Cited by 5
Applying the fuzzy lattice neurocomputing (FLN) classifier model to gear fault diagnosis
Li, B., Zhang, P., Mi, S.-S., Liu, P., & Liu, D. (2011) · Neural Computing and Applications · doi:10.1007/s00521-011-0719-y · Cited by 4
A Novel Method of Gearbox Health Vibration Monitoring Using Empirical Mode Decomposition
Dybała, J., & Gałęzia, A. (2013) · Lecture notes in mechanical engineering · doi:10.1007/978-3-642-39348-8_19 · Cited by 4
He, S., Zi, Y., Zhao, C., Chen, B., Wang, X., & He, Z. (2013) · Science China Technological Sciences · doi:10.1007/s11431-013-5382-3 · Cited by 3
Li, H. K., Ren, Y. J., & Yang, R. (2016) · IEEE International Instrumentation and Measurement Technology Conference · doi:10.1109/i2mtc.2016.7520450 · Cited by 2
Mo, D., Cui, L. L., Wang, J., & Xu, Y. (2013) · Advanced materials research · doi:10.4028/www.scientific.net/amr.819.292 · Cited by 1
Value of Optimal Wavelet Function in Gear Fault Diagnosis
Morsy, M. E., & Achtenová, G. (2017) · SAE International journal of vehicle dynamics, stability, and NVH · doi:10.4271/2017-01-1771 · Cited by 1
Research works printed but not linked: 3
- Mallat, S.G. (2008). A wavelet Tour of Signal Processing: The Sparse Way, Elsevier Press. [3rd ed.].
- Fan, 2013, The design of a new sparsogram for fast bearing fault diagnosis: Parts 1 and 2, Mech. Syst. Signal Process., 40, 499
- Fu, 2016, Rolling bearing diagnosing method based on time domain analysis and adaptive fuzzy C-means clustering, Shock Vib., 2016, 9412787
Cited by
Zhao, Z., Li, T., Wu, J., Sun, C., Wang, S., Yan, R., & Chen, X. (2020) · ISA Transactions · doi:10.1016/j.isatra.2020.08.010 · Cited by 688
Brito, L. C., Susto, G. A., Brito, J. N., & Duarte, M. A. V. (2022) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2021.108105 · Cited by 343
Badihi, H., Zhang, Y., Jiang, B., Pillay, P., & Rakheja, S. (2022) · Proceedings of the IEEE · doi:10.1109/jproc.2022.3171691 · Cited by 319
Gawde, S., Patil, S., Kumar, S., Kamat, P., Kotecha, K., & Abraham, A. (2023) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2023.106139 · Cited by 306
Saufi, S. R., Ahmad, Z. A. B., Leong, M. S., & Lim, M. H. (2019) · IEEE Access · doi:10.1109/access.2019.2938227 · Cited by 312
Metadata
- Authors
- Wei, Y., Li, Y., Xu, M., & Huang, W.
- Affiliations
- Harbin Institute of Technology (CN)
- Corresponding author
- Li, Yuqing
- Venue
- Entropy
- Publisher
- MDPI AG
- Published
- 2019-04-17
- Volume
- 21
- Issue
- 4
- Pages
- 409
- ISSN
- 1099-4300 (ISSN-L)
- PMC
- PMC7514898
- OpenAlex
- W2939978363
- Cited by
- 232
- References
- 176
- Citations by year
- 2026: 17 · 2025: 34 · 2024: 34 · 2023: 32 · 2022: 36 · 2021: 48 · 2020: 23 · 2019: 8
- FWCI
- 4.53
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Entropy (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- National Natural Science Foundation of China (51805434)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Physical Sciences › Engineering › Mechanical Engineering › Gear and Bearing Dynamics Analysis
- Keywords
- early fault diagnosis, rotating machinery, gears, rotor, bearings, predictive maintenance, condition monitoring
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.