A Review of Early Fault Diagnosis Approaches and Their Applications in Rotating Machinery
Open accessThe DOI matches its Crossref record; 176 of the 176 references it cites were found in a registry or an index.
Abstract
Rotating machinery is widely applied in various types of industrial applications. As a promising field for reliability of modern industrial systems, early fault diagnosis (EFD) techniques have attracted increasing attention from both academia and industry. EFD is critical to provide appropriate information for taking necessary maintenance actions and thereby prevent severe failures and reduce financial losses. A massive amounts of research work has been conducted in last two decades to develop EFD techniques. This paper reviews and summarizes the research works on EFD of gears, rotors, and bearings. The main purpose of this paper is to serve as a guidemap for researchers in the field of early fault diagnosis. After a brief introduction of early fault diagnosis techniques, the applications of EFD of rotating machine are reviewed in two aspects: fault frequency-based methods and artificial intelligence-based methods. Finally, a summary and some new research prospects are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures







Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The check wasn’t confident either way, so it gives no verdict — never disputed.
In the citing paper
“WVD is not directly used by researchers to determine the time-frequency structures of signals because of the cross-term interference problem [93].”
From Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review (2021) · cites this paper as [93]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Huang, N. E., Shen, Z., Long, S. R., Wu, M. C., Shih, H. H., Zheng, Q., Yen, N.-C., Tung, C. C., & Liu, H. H. (1998) · Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rspa.1998.0193 · Cited by 23,564 · cited 2×
“EMD, proposed by Huang et al [34], can adaptively decompose a complicated multi-component signal into a series of intrinsic mode functions (IMFs), whose instantaneous frequencies have physical meaning.”
BackgroundNearest neighbor pattern classification
Cover, T., & Hart, P. (1967) · IEEE Transactions on Information Theory · doi:10.1109/tit.1967.1053964 · Cited by 16,936 · cited 1×
“In KNN classification methods, each training sample is described as an S-dimensional space according to the value of each of its S features [53].”
MethodVariational Mode Decomposition
Dragomiretskiy, K., & Zosso, D. (2014) · IEEE Transactions on Signal Processing · doi:10.1109/tsp.2013.2288675 · Cited by 9,184 · cited 3×
“(EEMD), and local mean decomposition (LMD), empirical wavelet transform (EWT) [32], and variational mode decomposition (VMD) [33].”
BackgroundMethodENSEMBLE EMPIRICAL MODE DECOMPOSITION: A NOISE-ASSISTED DATA ANALYSIS METHOD
WU, Z., & HUANG, N. E. (2009) · Advances in Adaptive Data Analysis · doi:10.1142/s1793536909000047 · Cited by 8,715 · cited 3×
“EEMD, proposed by Huang, is inspired by the dyadic filter bank nature of the EMD when applied to white noise [38].”
BackgroundMethodInfluentialThe wavelet transform, time-frequency localization and signal analysis
Daubechies, I. (1990) · IEEE Transactions on Information Theory · doi:10.1109/18.57199 · Cited by 6,483
The Nature of Statistical Learning Theory
Sain, S. R. (1996) · Technometrics · doi:10.1080/00401706.1996.10484565 · Cited by 5,434
Entropy-based algorithms for best basis selection
Coifman, R. R., & Wickerhauser, M. V. (1992) · IEEE Transactions on Information Theory · doi:10.1109/18.119732 · Cited by 3,188
Gilles, J. (2013) · IEEE Transactions on Signal Processing · doi:10.1109/tsp.2013.2265222 · Cited by 2,210 · cited 2×
“Empirical wavelet transform (EWT) is a novel adaptive decomposition method proposed by Gilles [40] in 2013.”
MethodArtificial intelligence for fault diagnosis of rotating machinery: A review
Liu, R., Yang, B., Zio, E., & Chen, X. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.02.016 · Cited by 2,188 · cited 1×
“As an emerging field in industrial applications and an effective solution for fault recognition, AI-based early fault diagnosis method has been receiving increasing attention from academia and industry [3].”
BackgroundLogistic regression and Artificial Neural Network Classification models: A methodology review
Dreiseitl, S., & Ohno-Machado, L. (2002) · Journal of Biomedical Informatics · doi:10.1016/s1532-0464(03)00034-0 · Cited by 2,177 · cited 1×
“The weights and threshold value of the network are constantly adjusted by back propagation, and they help make the network error sum of squares minimum [59].”
Background
Research works printed but not linked: 3
- Mallat, S.G. (2008). A wavelet Tour of Signal Processing: The Sparse Way, Elsevier Press. [3rd ed.].
- Fan, 2013, The design of a new sparsogram for fast bearing fault diagnosis: Parts 1 and 2, Mech. Syst. Signal Process., 40, 499
- Fu, 2016, Rolling bearing diagnosing method based on time domain analysis and adaptive fuzzy C-means clustering, Shock Vib., 2016, 9412787
Cited by
Zhao, Z., Li, T., Wu, J., Sun, C., Wang, S., Yan, R., & Chen, X. (2020) · ISA Transactions · doi:10.1016/j.isatra.2020.08.010 · Cited by 688
Brito, L. C., Susto, G. A., Brito, J. N., & Duarte, M. A. V. (2022) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2021.108105 · Cited by 343
Badihi, H., Zhang, Y., Jiang, B., Pillay, P., & Rakheja, S. (2022) · Proceedings of the IEEE · doi:10.1109/jproc.2022.3171691 · Cited by 319
Gawde, S., Patil, S., Kumar, S., Kamat, P., Kotecha, K., & Abraham, A. (2023) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2023.106139 · Cited by 306
Saufi, S. R., Ahmad, Z. A. B., Leong, M. S., & Lim, M. H. (2019) · IEEE Access · doi:10.1109/access.2019.2938227 · Cited by 312
“The difference of bearing signal characteristics based on fault size; a) Vibration signal with severe fault, b) Vibration signal with incipient fault [45].”
BackgroundLv, H., Chen, J., Pan, T., Zhang, T., Feng, Y., & Liu, S. (2022) · Measurement · doi:10.1016/j.measurement.2022.111594 · Cited by 261
Gearbox Fault Diagnosis Using a Deep Learning Model With Limited Data Sample
Saufi, S. R., Ahmad, Z. A. B., Leong, M. S., & Lim, M. H. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2020.2967822 · Cited by 273
“It is difficult to select the mother wavelet function for WT [38], while EMD methods suffer from mode mixing problems [39].”
MethodVibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review
Mohd Ghazali, M. H., & Rahiman, W. (2021) · Shock and Vibration · doi:10.1155/2021/9469318 · Cited by 249
“WVD is not directly used by researchers to determine the time-frequency structures of signals because of the cross-term interference problem [93].”
BackgroundInfluentialApplication of recurrent neural network to mechanical fault diagnosis: A review
Zhu, J., Jiang, Q., Shen, Y., Qian, C., Xu, F., & Zhu, Q. (2022) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-022-0102-1 · Cited by 200
“Many existing overviews [11-14] reviewed fault diagnosis from the view of deep learning or other angles, which could help fault diagnosis researchers to establish a clearer and systematic understanding of fault diagnosis.”
BackgroundRole of artificial intelligence in rotor fault diagnosis: a comprehensive review
Nath, A. G., Udmale, S. S., & Singh, S. K. (2021) · Artificial Intelligence Review · doi:10.1007/s10462-020-09910-w · Cited by 172
“1 3 of the research related to AI-based fault diagnosis of rotating machinery only focuses on the bearing or gear faults (Wei et al. 2019; Chen et al. 2018; Liu et al. 2018), with little attention paid to RFD.”
BackgroundVibration signal-based early fault prognosis: Status quo and applications
Lv, Y., Zhao, W., Zhao, Z., Li, W., & Ng, K. K. H. (2022) · Advanced Engineering Informatics · doi:10.1016/j.aei.2022.101609 · Cited by 135
Wang, J., Wang, D., Wang, S., Li, W., & Song, K. (2021) · IEEE Access · doi:10.1109/access.2021.3056767 · Cited by 125
“Tremendous research efforts have been dedicated to fault diagnosis of bearings [1]–[4].”
BackgroundKoizumi, Y., Kawaguchi, Y., Imoto, K., Nakamura, T., Nikaido, Y., Tanabe, R., Purohit, H., Suefusa, K., Endo, T., Yasuda, M., et al. (2020) · arXiv (Cornell University) · doi:10.48550/arxiv.2006.05822 · Cited by 154
“In early studies, acoustic features for detecting anomalies are designed based on the mechanical structure of the target machine [18–20].”
MethodFault diagnosis of various rotating equipment using machine learning approaches – A review
Manikandan, S., & Duraivelu, K. (2020) · Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering · doi:10.1177/0954408920971976 · Cited by 107
“Among the components in hydraulic equipment, the bearings and gears are the essential elements in rotating machinery.(11,12) Data acquisition accumulates signals which replicate the position of bearings health from sensor systems.”
BackgroundAlharbi, F., Luo, S., Zhang, H., Shaukat, K., Yang, G., Wheeler, C., & Chen, Z. (2023) · Sensors · doi:10.3390/s23041902 · Cited by 123
“Since the wavelet transform can zoom and have adaptive windowing capabilities due to its variable time localization and frequency resolution, it is particularly suited to nonstationary signal analysis [15].”
BackgroundNassef, M. G. A., Hussein, T. M., & Mokhiamar, O. (2020) · Measurement · doi:10.1016/j.measurement.2020.108514 · Cited by 99
Bearing Fault Feature Extraction and Fault Diagnosis Method Based on Feature Fusion
Zhu, H., He, Z., Wei, J., Wang, J., & Zhou, H. (2021) · Sensors · doi:10.3390/s21072524 · Cited by 94
“Therefore, the fault diagnosis of bearing is of great significance for maintaining the safe operation of equipment [5].”
BackgroundHan, T., Ma, R., & Zheng, J. (2021) · Measurement · doi:10.1016/j.measurement.2021.109208 · Cited by 93
Acoustic Anomaly Detection of Mechanical Failures in Noisy Real-Life Factory Environments
Tagawa, Y., Maskeliūnas, R., & Damaševičius, R. (2021) · Electronics · doi:10.3390/electronics10192329 · Cited by 100
“More works on the analysis of vibration and acoustic data for early fault diagnostics of industrial machinery are discussed in the review paper [27,28].”
BackgroundNirwan, N. W., & Ramani, H. B. (2021) · Materials Today Proceedings · doi:10.1016/j.matpr.2021.05.447 · Cited by 89
Maurya, M., Panigrahi, I., Dash, D., & Malla, C. (2023) · Soft Computing · doi:10.1007/s00500-023-08255-0 · Cited by 91
“Wei et al. (2019) proposed an AI-based early fault detection methodology is achieving huge attention from academia and industry as a new area in industrial applications and an efficient way to identify faults (Xia et al. 2016).”
Skoczylas, A., Stefaniak, P., Anufriiev, S., & Jachnik, B. (2021) · Applied Sciences · doi:10.3390/app11052299 · Cited by 64
“The authors of [19] have presented a review of such methods for the more general problem of fault diagnostics in rotating machinery.”
BackgroundTechnology development and commercial applications of industrial fault diagnosis system: a review
Liu, C., Cichoń, A., Królczyk, G., & Li, Z. (2021) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-021-08047-6 · Cited by 70
Iunusova, E., Gonzalez, M. K., Szipka, K., & Archenti, A. (2023) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-023-02151-y · Cited by 62
Liu, Y., Zhou, Y. J., Liu, Y., Xu, Z., & He, Y. (2025) · Engineering · doi:10.1016/j.eng.2025.04.003 · Cited by 91
Bearing Fault Feature Selection Method Based on Weighted Multidimensional Feature Fusion
Li, Y., Dai, W., & Zhang, W. (2020) · IEEE Access · doi:10.1109/access.2020.2967537 · Cited by 59
“and maintaining the safe operation of the equipment are of great significance [6].”
BackgroundSelf-citationSynthetic Data Augmentation and Deep Learning for the Fault Diagnosis of Rotating Machines
Khan, A., Hwang, H., & Kim, H. S. (2021) · Mathematics · doi:10.3390/math9182336 · Cited by 66
“State of the art reviews of the use of machine learning and deep learning for the fault diagnosis of rotating machines can be found in recent articles [4,8,9].”
BackgroundHybrid Multimodal Feature Fusion with Multi-Sensor for Bearing Fault Diagnosis
Xu, Z., Chen, X., Li, Y., & Xu, J. (2024) · Sensors · doi:10.3390/s24061792 · Cited by 73
Self-citationSilva, A., Zarzo, A., González, J. M. M., & Muñoz-Guijosa, J. M. (2020) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2020.115628 · Cited by 58
The Feature Extraction and Diagnosis of Rolling Bearing Based on CEEMD and LDWPSO-PNN
Liu, F., Gao, J., & Liu, H. (2020) · IEEE Access · doi:10.1109/access.2020.2968843 · Cited by 54
“With data showing, almost all the faults in rotating machines are caused by rolling bearing problems [1]–[3].”
BackgroundWang, S., Wang, Q., Xiao, Y., Liu, W., & Shang, M. (2022) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2022.106424 · Cited by 53
Muneer, A., Taib, S. M., Naseer, S., Ali, R. F., & Aziz, I. A. (2021) · Electronics · doi:10.3390/electronics10202453 · Cited by 57
A Critical Overview of the “Filterbank-Feature-Decision” Methodology in Machine Condition Monitoring
Antoni, J. (2021) · Acoustics Australia · doi:10.1007/s40857-021-00232-7 · Cited by 47
Fault diagnosis of rotor based on Local-Global Balanced Orthogonal Discriminant Projection
Shi, M., Zhao, R., Wu, Y., & He, T. (2020) · Measurement · doi:10.1016/j.measurement.2020.108320 · Cited by 47
Yao, D., Zhao, H., Chen, Z., & Liu, H. (2022) · Fuel · doi:10.1016/j.fuel.2022.123461 · Cited by 45
State of the art on vibration signal processing towards data‐driven gear fault diagnosis
Zhang, S., Zhou, J., Wang, E., Zhang, H., Gu, M., & Pirttikangas, S. (2022) · IET Collaborative Intelligent Manufacturing · doi:10.1049/cim2.12064 · Cited by 50
Hou, L., Jiang, R., Tan, Y., & Zhang, J. (2020) · IEEE Access · doi:10.1109/access.2020.3028465 · Cited by 43
“ManyML algorithms have been used for REB fault diagnosis, and achieved considerable success [4]–[12].”
MethodSahu, P. K., & Nandan, R. (2022) · Journal of Vibration Engineering & Technologies · doi:10.1007/s42417-022-00591-z · Cited by 43
“A defect in bearing, if remain undetected can lead to catastrophic failure of the machinery [1].”
BackgroundSignal-to-Image: Rolling Bearing Fault Diagnosis Using ResNet Family Deep-Learning Models
Wu, G., Ji, X., Yang, G., Jia, Y., & Cao, C. (2023) · Processes · doi:10.3390/pr11051527 · Cited by 47
RED: RFID-Based Eccentricity Detection for High-Speed Rotating Machinery
He, Y., Zheng, Y., Jin, M., Yang, S., Zheng, X., & Liu, Y. (2019) · IEEE Transactions on Mobile Computing · doi:10.1109/tmc.2019.2962770 · Cited by 40
“To avoid catastrophic accidents, it is necessary and significant to detect faults early before the severe failure stage of the machinery [10], so many researchers are committed to developing time-efficient detection systems.”
BackgroundKarabacak, Y. E., & Özmen, N. G. (2021) · Measurement · doi:10.1016/j.measurement.2021.110366 · Cited by 38
Yang, B., Wang, T., Xie, J., & Yang, J. N. (2023) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2023.3276007 · Cited by 37
“In recent years, intelligent feature extraction and pattern recognition technologies have been applied to fault diagnosis, which can directly get rid of the limitation of manual data processing and prior knowledge [2], [3], [4].”
BackgroundA review of SCADA-based condition monitoring for wind turbines via artificial neural networks
Sheng, L., Li, C., Gao, M., Xi, X., & Zhou, D. (2025) · Neurocomputing · doi:10.1016/j.neucom.2025.129830 · Cited by 51
Brito, L. C., Susto, G. A., Brito, J. N., & Duarte, M. A. V. (2021) · Informatics · doi:10.3390/informatics8040085 · Cited by 45
“Monitoring through the vibration signal is one of the non-invasive techniques that provide the greatest amount of information about the dynamic behavior of the asset, and, for this reason, it is of growing interest [6,7].”
Zhang, S., Xu, F., Hu, M., Zhang, L., Liu, H., & Li, M. (2021) · Measurement · doi:10.1016/j.measurement.2021.109337 · Cited by 35
Smart machine fault diagnostics based on fault specified discrete wavelet transform
Daş, O., & DAŞ, D. B. (2023) · Journal of the Brazilian Society of Mechanical Sciences and Engineering · doi:10.1007/s40430-022-03975-0 · Cited by 39
“The most common supervised ML algorithms that are employed in this field are Artificial Neural Networks (ANN), Support Vector Machines (SVM), and k-Nearest Neighbors (kNN) [30–36].”
MethodDiagnosis of Multiple Faults in Rotating Machinery Using Ensemble Learning
Inyang, U. I., Petrunin, I. V., & Jennions, I. K. (2023) · Sensors · doi:10.3390/s23021005 · Cited by 38
“suitable for analysing transient signals and it uses the basis function to match a specific fault condition [27].”
BackgroundXue, S., Tan, J., Shi, L., & Deng, J. (2020) · Entropy · doi:10.3390/e22020209 · Cited by 34
Karnavas, Y. L., Plakias, S., & Chasiotis, I. D. (2021) · IET Electric Power Applications · doi:10.1049/elp2.12063 · Cited by 33
“Vibration, acoustic, current and temperature measurements have been widely used in fault diagnosis techniques, preventing the losses of bearing element failures [2, 3].”
BackgroundZhu, S., Liao, B. Y., Hua, Y., Zhang, C., Wan, F., & Qing, X. (2022) · ISA Transactions · doi:10.1016/j.isatra.2022.07.016 · Cited by 34
Zhi, S., Niu, Y., Ma, L., Wu, H., Shen, H., & Wang, T. (2025) · Eksploatacja i Niezawodnosc - Maintenance and Reliability · doi:10.17531/ein/205977 · Cited by 32
“The accuracy and precision of these analyses are crucial for assessing the health status and detecting faults in rotating machinery, directly impacting the system’s reliability and performance [1-3].”
Related Entropy Theories Application in Condition Monitoring of Rotating Machineries
Liu, L., Zhi, Z., Zhang, H., Guo, Q., Peng, Y., & Liu, D. (2019) · Entropy · doi:10.3390/e21111061 · Cited by 32
“Stage I, stage II, and stage III are normal operation, early fault, and failure, respectively [30].”
BackgroundProbabilistic bearing fault diagnosis using Gaussian process with tailored feature extraction
Liang, M., & Zhou, K. (2021) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-021-08392-6 · Cited by 31
Li, Z., Cui, Y., Li, L., Chen, R., Dong, L., & Du, J. (2022) · Entropy · doi:10.3390/e24030310 · Cited by 28
“These abnormal shocks may result in an unexpected failure of large-scale equipment if without timely inspection and maintenance [3,4].”
BackgroundSahu, P. K., & Nandan, R. (2024) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-024-0402-8 · Cited by 26
“It constantly runs under hostile environments, varying loads and temperatures leading to catastrophic failures of the components/ systems if the faults remain undetected [4].”
Wang, Z., Xia, H., Yin, W., & Yang, B. R. (2022) · Annals of Nuclear Energy · doi:10.1016/j.anucene.2022.109434 · Cited by 27
Zhang, C., Kong, L., Xu, Q., Zhou, K., & Pan, H. (2020) · Measurement Science and Technology · doi:10.1088/1361-6501/aba93b · Cited by 26
“However, its primary components are likely to be damaged during use due to the complex and harsh working environment, which severely influences the production safety of modern industrial systems [4, 5].”
BackgroundIntelligent fault diagnosis using an unsupervised sparse feature learning method
Cheng, C., Wang, W., Liu, H., & PECHT, M. G. (2020) · Measurement Science and Technology · doi:10.1088/1361-6501/ab8c0e · Cited by 24
“Efficient fault diagnose is an ongoing research subject [1].”
BackgroundTime‐frequency synchroextracting transform
Zhang, R., Liu, X., Zheng, Y., Lv, H., Li, B., Yang, S., & Tan, Y. (2021) · IET Signal Processing · doi:10.1049/sil2.12073 · Cited by 23
Adaptive singular value decomposition for bearing fault diagnosis under strong noise interference
Cui, L., Liu, Y., & Zhao, D. (2022) · Measurement Science and Technology · doi:10.1088/1361-6501/ac672b · Cited by 23
“The bearing signal in its early failure stage, i.e. stage (II) is selected for analysis [27].”
Shin, J., & Lee, S. (2023) · Electronics · doi:10.3390/electronics12020409 · Cited by 23
Wang, X., Lu, Z., Wei, J., & Zhang, Y. (2019) · Entropy · doi:10.3390/e21090865 · Cited by 23
Signal Denoising Method Using AIC–SVD and Its Application to Micro-Vibration in Reaction Wheels
Yin, X., Yang, X., Sheng, X., & Shen, Y. (2019) · Sensors · doi:10.3390/s19225032 · Cited by 22
“Simultaneously, in the fault diagnosis of rotating machinery, the corresponding signal processing technologies have been a part of the most useful approaches [2].”
BackgroundCalabrese, F., Regattieri, A., Bortolini, M., Galizia, F. G., & Visentini, L. (2021) · Applied Sciences · doi:10.3390/app11209580 · Cited by 23
“In most ML methods, feature selection before fault diagnosis helps to improve the final classification accuracy [39].”
MethodCaldero, P., & Zoeke, D. (2019) · Sensors · doi:10.3390/s19245398 · Cited by 23
“To better understand the nature of the measured vibration signals and to allow the investigation of trends [13], a post-processing is proposed not exclusively based on frequency domain.”
BackgroundWang, J., Wang, D., & Wang, X. (2020) · Chinese Control Conference (CCC) · doi:10.23919/ccc50068.2020.9189568 · Cited by 22
Machine Learning for Inverter-Fed Motors Monitoring and Fault Detection: An Overview
García-Pérez, D., Saeed, M., Díaz, I., Enguita, J. M., Guerrero, J. M., & Briz, F. (2024) · IEEE Access · doi:10.1109/access.2024.3366810 · Cited by 22
“The use of ML classifiers for fault diagnosis of induction motors can be found in [24] and [25].”
MethodMachine learning based mechanical fault diagnosis and detection methods: a systematic review
Xin, Y., Zhu, J., Cai, M., Zhao, P., & Zuo, Q. (2024) · Measurement Science and Technology · doi:10.1088/1361-6501/ad8cf6 · Cited by 28
Wu, T., Zhang, W., Zhang, B., & Luo, H. (2022) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2022.109792 · Cited by 21
Dynamic modelling strategy of a shaft-disk-blade coupling system integrating beam and shell theories
Zeng, J., Yang, Y., Ma, H., Yang, Y., & Fan, C. (2023) · International Journal of Mechanics and Materials in Design · doi:10.1007/s10999-023-09664-7 · Cited by 21
“Such a model is conducive to fault diagnosis of mechanical equipment and equipment maintenance in advance, extending mechanical lifetime, and avoiding unnecessary losses (Wei et al. 2019).”
Feng, Y., Zheng, C., Chen, J., Pan, T., Xie, J., He, S., & Wang, H. (2024) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2024.112057 · Cited by 21
VSC-ACGAN: bearing fault diagnosis model applied to imbalanced samples
Yang, Z. Y., Mao, R., Ye, L., Liu, Y., Hu, X., & Li, Y. (2025) · Measurement Science and Technology · doi:10.1088/1361-6501/adb872 · Cited by 19
“Traditional bearing fault diagnosis methods usually rely on manual extraction of features to determine the fault state [11, 12].”
Self-citationReview on engine vibration fault analysis based on data mining
Zhu, J., & Sharma, A. (2021) · Journal of Vibroengineering · doi:10.21595/jve.2021.21928 · Cited by 20
“Authors describe the data mining methods for steam turbine fault diagnostics which is based on continuous data measurements [25].”
BackgroundHou, Y., Yang, A., Guo, W., En-rang, Z., Xiao, Q., Guo, Z., & Huang, Z. (2022) · IEEE Access · doi:10.1109/access.2022.3151240 · Cited by 20
Additive fault diagnosis techniques in rotor systems: a state-of-the-art review
Kumar, P., & Tiwari, R. (2024) · Sadhana · doi:10.1007/s12046-024-02543-7 · Cited by 20
“Later, Wei et al [216] presented a review paper which describes about the two aspects of early fault diagnosis techniques i.e., fault frequency-based detection (FFD) method and artificial intelligence (AI) based method in gears, rotors and bearings.”
Overview of Diagnostic Methods for Rotating Electrical Machines
Djagarov, N. F., Enchev, G., Grozdev, Z., & Djagarova, J. (2020) · International Conference on Energy Efficiency and Agricultural Engineering (EE&AE) · doi:10.1109/eeae49144.2020.9279018 · Cited by 20
Fault‐tolerant control of inverter for the integration of solar PV under abnormal conditions
Moradmand, A., Dorostian, M., Ramezani, A., Sajadi, A., & Shafai, B. (2020) · The Journal of Engineering · doi:10.1049/joe.2019.1280 · Cited by 18
Hierarchical dispersion Lempel–Ziv complexity for fault diagnosis of rolling bearing
Li, Y., Li, T., Xiao, M., & Xiong, Q. (2022) · Measurement Science and Technology · doi:10.1088/1361-6501/aca81b · Cited by 17
“Traditional fault feature extraction methods include blind source separation [10], wavelet-based [11], and adaptive decomposition methods [12].”
Self-citationXie, F., Li, G., Song, C., & Song, M. (2023) · Fractal and Fractional · doi:10.3390/fractalfract7120875 · Cited by 18
Motor rolling bearing fault diagnosis based on MVMD energy entropy and GWO-SVM
Tang, J. X., & Zhao, Q. (2023) · Journal of Vibroengineering · doi:10.21595/jve.2023.23046 · Cited by 16
“Therefore, it is the key of fault diagnosis to extract the sensitive feature information from the complex signals of rolling bearings [2].”
BackgroundInduction Machine Fault Diagnosis With Quadratic Time–Frequency Distributions: State of the Art
Vitor, A. L. O., Goedtel, A., Castoldi, M. F., de Souza, W. A., & Bazan, G. H. (2023) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2023.3323999 · Cited by 19
Guo, R., Zhang, G., Zhang, Q., Zhou, L., Yu, H., Lei, M., & Lv, Y. (2021) · Energies · doi:10.3390/en14164787 · Cited by 16
A Multi-Scale and Lightweight Bearing Fault Diagnosis Model with Small Samples
Gao, S., He, J., Pan, H., & Gong, T. (2022) · Symmetry · doi:10.3390/sym14050909 · Cited by 16
“The research on the bearing fault diagnosis algorithm is of great significance to the safety of equipment [1,2].”
BackgroundMedina, R., Sánchez, R., Cabrera, D. R., Cerrada, M., Estupiñán, E., Ao, W., & Vásquez, R. E. (2024) · Sensors · doi:10.3390/s24020461 · Cited by 16
Kiakojouri, A., Lu, Z., Mirring, P., Powrie, H. E. G., & Wang, L. (2023) · Sensors · doi:10.3390/s23229048 · Cited by 15
“Also, it is often required to pre-determine the number of sub-signals to enable the selection of the most useful sub-signal for the envelope and hence, bearing fault detection [10,11].”
BackgroundMethodDeep Learning for Data-Driven Predictive Maintenance
Sohaib, M., Mushtaq, S., & Uddin, J. (2021) · Intelligent systems reference library · doi:10.1007/978-3-030-75490-7_3 · Cited by 22
Imbalance domain adaptation network with adversarial learning for fault diagnosis of rolling bearing
Zhu, H., Huang, Z., Lu, B., Cheng, F., & Zhou, C. (2022) · Signal Image and Video Processing · doi:10.1007/s11760-022-02190-7 · Cited by 16
“As a rotating part of mechanical equipment, rolling bearing is widely used in various industrial fields [1].”
BackgroundHassan, A. A., & Dao, P. B. (2025) · Energies · doi:10.3390/en18195166 · Cited by 14
Jyothi, R. L., Holla, T., Uma Rao, K., & Jayapal, R. (2021) · International Journal of Power Electronics and Drive Systems/International Journal of Electrical and Computer Engineering · doi:10.11591/ijpeds.v12.i2.pp1205-1215 · Cited by 15
Lu, H., Zhang, W., Chen, Z., Li, Z.-J., Zhang, Y.-Q., Yang, M., & Zou, C. (2024) · Measurement science and technology · doi:10.1088/1361-6501/ad7a1f · Cited by 8
“According to the literature [50], the full life cycle of the bearing is divided into three stages: the stage of normal operation (I), the early stage of potential failure (II), and the terminal stage of outright failure (III).”
Gandhi, C. P., Xiang, J., Kumar, A., Vashishtha, G., & Kant, R. (2022) · Measurement · doi:10.1016/j.measurement.2022.111577 · Cited by 11
An Intelligent Diagnostic Method for Multisource Coupling Faults of Complex Mechanical Systems
Sun, X., Wang, M., Zhan, B., Xiong, Y., & Yu, W. (2023) · Shock and Vibration · doi:10.1155/2023/6928871 · Cited by 14
“However, there are still insufcient research studies on early failures, composite failures, and multiple types of failures of these components [5, 6].”
BackgroundA deep condition feature learning approach for rotating machinery based on MMSDE and optimized SAEs
Ge, M., Ge, Z.-Y., Pan, H., Liu, Y., Xu, Y., & Liu, J. (2020) · Measurement Science and Technology · doi:10.1088/1361-6501/ab89e3 · Cited by 12
Rodrigues, C. E., Nascimento, C. L., & Rade, D. A. (2021) · Journal of Control Automation and Electrical Systems · doi:10.1007/s40313-021-00805-x · Cited by 11
Latent Dimensions of Auto-Encoder as Robust Features for Inter-Conditional Bearing Fault Diagnosis
Kancharla, C. R., Vankeirsbilck, J., Vanoost, D., Boydens, J., & Hallez, H. (2022) · Applied Sciences · doi:10.3390/app12030965 · Cited by 12
Adamou, A. A., & Alaoui, C. (2024) · Machines · doi:10.3390/machines12090604 · Cited by 10
Thermoelectric Energy Harvesting on Rotation Machines for Wireless Sensor Network in Industry 4.0
dos Santos, A. D., de Brito, S. C., Martins, A. V., Silva, F. F., & Morais, F. J. D. O. (2021) · IEEE International Conference on Industry Applications · doi:10.1109/induscon51756.2021.9529630 · Cited by 10
Dubaish, A. A., & Jaber, A. A. (2023) · Engineering and Technology Journal · doi:10.30684/etj.2023.142462.1535 · Cited by 14
Zhang, R., Liu, X., Zheng, Y., Lv, H., Li, B., Yang, S., & Tan, Y. (2021) · Journal of Vibration Engineering & Technologies · doi:10.1007/s42417-021-00368-w · Cited by 10
Novel features for the detection of bearing faults in railway vehicles
Kreuzer, M., Schmidt, A., & Kellermann, W. (2021) · NOISE-CON proceedings · doi:10.3397/in-2021-2537 · Cited by 10
“In order to separate the fault-related components from the environmental noise, several signal decomposition techniques, e.g., the Empirical Mode Decomposition [2] and Wavelet Transforms [3], and adaptive filtering techniques [4] have been applied to this problem.”
BackgroundMethod
Metadata
- Authors
- Wei, Y., Li, Y., Xu, M., & Huang, W.
- Affiliations
- Harbin Institute of Technology (CN)
- Corresponding author
- Li, Yuqing
- Venue
- Entropy
- Publisher
- MDPI AG
- Published
- 2019-04-17
- Volume
- 21
- Issue
- 4
- Pages
- 409
- ISSN
- 1099-4300 (ISSN-L)
- PMC
- PMC7514898
- OpenAlex
- W2939978363
- Cited by
- 232
- References
- 176
- Citations by year
- 2026: 17 · 2025: 34 · 2024: 34 · 2023: 32 · 2022: 36 · 2021: 48 · 2020: 23 · 2019: 8
- FWCI
- 4.53
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Entropy (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- National Natural Science Foundation of China (51805434)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Physical Sciences › Engineering › Mechanical Engineering › Gear and Bearing Dynamics Analysis
- Keywords
- early fault diagnosis, rotating machinery, gears, rotor, bearings, predictive maintenance, condition monitoring
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.