The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Review of Industry 4.0 from the Perspective of Automation and Supervision Systems: Definitions, Architectures and Recent Trends
Open accessAbstract
Industry 4.0 is a new paradigm that is transforming the industrial scenario. It has generated a large amount of scientific studies, commercial equipment and, above all, high expectations. Nevertheless, there is no single definition or general agreement on its implications, specifically in the field of automation and supervision systems. In this paper, a review of the Industry 4.0 concept, with equivalent terms, enabling technologies and reference architectures for its implementation, is presented. It will be shown that this paradigm results from the confluence and integration of both existing and disruptive technologies. Furthermore, the most relevant trends in industrial automation and supervision systems are covered, highlighting the convergence of traditional equipment and those characterized by the Internet of Things (IoT). This paper is intended to serve as a reference document as well as a guide for the design and deployment of automation and supervision systems framed in Industry 4.0.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Industry 4.0: A survey on technologies, applications and open research issues
Lu, Y. (2017) · Journal of Industrial Information Integration · doi:10.1016/j.jii.2017.04.005 · Cited by 3,012
Industry 5.0: A survey on enabling technologies and potential applications
Maddikunta, P. K. R., Pham, Q.-V., B, P., Deepa, N., Dev, K., Gadekallu, T. R., Ruby, R., & Liyanage, M. (2022) · Journal of Industrial Information Integration · doi:10.1016/j.jii.2021.100257 · Cited by 1,890
State of Industry 5.0—Analysis and Identification of Current Research Trends
Akundi, A., Euresti, D., Luna, S., Ankobiah, W., Lopes, A., & Edinbarough, I. (2022) · Applied System Innovation · doi:10.3390/asi5010027 · Cited by 482 · cited 2×
“that there is a shift in ,”
BackgroundMicrogrid Digital Twins: Concepts, Applications, and Future Trends
Bazmohammadi, N., Madary, A., Vasquez, J. C., Mohammadi, H. B., Khan, B., Wu, Y., & Guerrero, J. M. (2022) · IEEE Access · doi:10.1109/access.2021.3138990 · Cited by 233 · cited 1×
“Industry 4.0, including . paper aims to provide an overview of Industry 4.0 and IIoT by revisiting the essential researchers”
BackgroundInfluentialIndustry 4.0 reference architectures: State of the art and future trends
Nakagawa, E. Y., Antonino, P. O., Schnicke, F., Capilla, R., Kuhn, T., & Liggesmeyer, P. (2021) · Computers & Industrial Engineering · doi:10.1016/j.cie.2021.107241 · Cited by 167 · cited 3×
“Node-RED manages multiple communication protocols and facilitates data exchange with devices of different natures, such as PLCs using industrial protocols, like OPC, Modbus TCP, PROFINET, MQTT, among others.”
BackgroundMethodInfluentialA Review of Industry 4.0 Manufacturing Process Security Risks
Prinsloo, J., Sinha, S., & von Solms, B. (2019) · Applied Sciences · doi:10.3390/app9235105 · Cited by 140 · cited 4×
“Similarly, according to [31], Industry 4.0 involves the integration of various technologies, particularly IoT technologies, into existing technologies used in the production and industrial manufacturing sectors.”
BackgroundInfluentialThe PLC as a Smart Service in Industry 4.0 Production Systems
Langmann, R., & Stiller, M. (2019) · Applied Sciences · doi:10.3390/app9183815 · Cited by 77
Sverko, M., Grbac, T. G., & Mikuc, M. (2022) · IEEE Access · doi:10.1109/access.2022.3211288 · Cited by 71 · cited 8×
“Sending alarms or information about the monitored process via text messages (SMS) or emails has been an option available for years in monitoring systems.”
BackgroundMethodInfluentialCalderón Godoy, A. J., & González Pérez, I. (2018) · Journal of Sensor and Actuator Networks · doi:10.3390/jsan7020023 · Cited by 71
Supervisory control and data acquisition approach in node-RED: Application and discussions
Nițulescu, I.-V., & Korodi, A. (2020) · IoT · doi:10.3390/iot1010005 · Cited by 53 · cited 5×
“SCADA systems are not easily applicable to the IoT because those systems have always considered devices with very specific standards, a restricted range of manufacturers and lack mechanisms to ensure information security and confidentiality [76].”
BackgroundInfluentialTowards a lightweight protocol for Industry 4.0: An implementation based benchmark
Iglesias-Urkia, M., Orive, A., Barcelo, M., Moran, A., Bilbao, J., & Urbieta, A. (2017) · 2017 IEEE International Workshop of Electronics, Control, Measurement, Signals and their Application to Mechatronics (ECMSM) · doi:10.1109/ecmsm.2017.7945894 · Cited by 53 · cited 1×
“…from Manufacturing Execution Systems (MESs), Enterprise Resource Planning (ERP) and overall business management systems. which envisions future factories as intelligent environments where machines, sensors and actuators are interconnected, enabling collaboration monitoring and control [40].”
BackgroundIntegration of Sensors, Controllers and Instruments Using a Novel OPC Architecture
González, I., Calderón, A., Barragán, A., & Andújar, J. (2017) · Sensors · doi:10.3390/s17071512 · Cited by 52
Self-citationEnhanced Modbus/TCP Security Protocol: Authentication and Authorization Functions Supported
Martins, T., & Oliveira, S. V. G. (2022) · Sensors · doi:10.3390/s22208024 · Cited by 45 · cited 2×
“In these systems, open architectures are implemented and standardized communication protocols are used, implying better communication capabilities.”
BackgroundAn Approach to Industrial Automation Based on Low-Cost Embedded Platforms and Open Software
Minchala, L. I., Peralta, J., Mata-Quevedo, P., & Rojas, J. (2020) · Applied Sciences · doi:10.3390/app10144696 · Cited by 37 · cited 2×
“In these systems, open architectures are implemented and standardized communication protocols are used, implying better communication capabilities.”
BackgroundInfluentialToward a Practical Digital Twin Platform Tailored to the Requirements of Industrial Energy Systems
Kasper, L., Birkelbach, F., Schwarzmayr, P., Steindl, G., Ramsauer, D., & Hofmann, R. (2022) · Applied Sciences · doi:10.3390/app12146981 · Cited by 33 · cited 1×
“Industry 4.0, including . paper aims to provide an overview of Industry 4.0 and IIoT by revisiting the essential researchers”
BackgroundInfluential
Metadata
- Authors
- Folgado, F., Calderón, D., González, I., & Calderón, A.
- Venue
- Electronics
- Publisher
- MDPI AG
- Published
- 2024-02-16
- Volume
- 13
- Issue
- 4
- Pages
- 782
- ISSN
- 2079-9292 (ISSN-L)
- OpenAlex
- W4391971011
- Cited by
- 174
- References
- 15
- FWCI
- 36.43
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.