Hydrothermal Conversion of Neutral Sulfite Semi-Chemical Red Liquor into Hydrochar
Open accessThe DOI matches its Crossref record; 34 of the 35 references it cites were found in a registry or an index; none of the 32 sources its claims cite is checked for support yet.
Abstract
Hydrochar was produced from neutral sulfite semi-chemical (NSSC) red liquor as a possible bio-based solid fuel for use in power generation facilities. Hydrothermal conversion (HTC) experiments were conducted using a fixed liquor-to-water volume ratio of 1:8 and reaction time of 3 h. Solutions were processed using different chemical additives, pH and temperature conditions to determine the optimum conditions required for producing a high energy content solid fuel. The hydrochar samples produced were analyzed by ultimate, thermogravimetric (TGA) and Fourier transform infrared spectroscopy (FTIR) analyses to determine physicochemical properties that are important for utilization as a fuel. The residual process liquids were also analyzed to better understand the effect of HTC process conditions on their properties. It was determined that the optimum conditions for producing a solid fuel was at a reaction temperature of 250 °C, in the presence of acetic acid at pH 3. The maximum energy content (HHV) of the hydrochar produced from red liquor at this condition was 29.87 MJ/kg, and its ash content was 1.12 wt.%.
Overview
CoChat Summary
TL;DR
This study used hydrothermal carbonization (HTC) to convert neutral sulfite semi-chemical red liquor into hydrochar and found that higher reaction severity produced a more coal-like fuel. The best reported condition was 250 °C with acetic acid at pH 3, yielding hydrochar with 29.87 MJ/kg HHV, 73.62 wt.% carbon, and 1.12 wt.% ash.
Key findings
- Carbon content increased with HTC severity, from 28.95 wt.% in raw red liquor to 73.62 wt.% in the best-performing hydrochar (sample 4 at 250 °C, acetic acid, pH 3).
- HHV also increased with HTC severity; the maximum reported HHV was 29.87 MJ/kg at 250 °C for samples 3 and 4, close to bituminous coal at 32.32 MJ/kg.
- Ash content dropped strongly with temperature; the lowest reported ash content was 1.12 wt.% (sample 4 at 250 °C), compared with 10.39 wt.% for raw red liquor.
- Mass yield decreased as temperature increased, with reported yields in the 45%–75% range; the maximum yield was 75% for sample 1 at 190 °C.
Methods
- Batch HTC experiments were run in a 1 L Parr reactor using NSSC red liquor and deionized water at a liquor-to-water ratio of 1:8, for 3 h, at 190 °C, 220 °C, and 250 °C.
- Four reaction media were tested: water only (pH 6.75), acetic acid to pH 4, ethanol plus acetic acid to pH 4, and acetic acid to pH 3.
- Hydrochars were characterized by ultimate analysis, TGA/thermal analysis, bomb calorimetry for HHV, FTIR, and inorganic metal analysis of the residual process liquid.
Limitations
- The paper does not report a full scale-up, combustion, or power-plant performance test; this is evident from the text because the conclusions are based on lab-scale characterization only.
- The study only varies a limited set of conditions and reports a small number of samples; this is evident from the text because only four media conditions and three temperatures are described.
- The text gives no explicit limitation section or quantitative uncertainty analysis beyond the reported measurement values; this is not stated in the paper.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures






![Figure 6 Atomic O/C -H/C Ratios of Raw Red Liquor and HTC Sample 4 Hydrochars (adapted from Trif -Tordai and Ionel via Wikimedia Commons [CC BY -SA 3.0]). Figure 6. Atomic O/C-H/C Ratios of Raw Red Liquor and HTC Sample 4 Hydrochars (adapted from Trif-Tordai and Ionel via Wikimedia Commons [CC BY-SA 3.0]).](https://figures.cochat.ai/paper-figures/a72c7d236e2648c1a1bcb3554dff7a78/hydrothermal-conversion-of-neutral-sulfite-semi-chemical-red-liquor-into-figure-6.png)
Verification
Claims the paper makes
0 Valid · 0 Not valid · 30 Not checked · 163 Own results and interpretations
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“hemicellulose and cellulose contents”
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The increase of HTC temperature significantly reduces the ash content of the hydrochar”
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The maximum energy content (HHV) of the hydrochar produced from red liquor at this condition was 29.87 MJ/kg”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“It was determined that the optimum conditions for producing a solid fuel was at a reaction temperature of 250 C, in the presence of acetic acid at pH 3.”
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“leads to a significant increase in the carbon content of the hydrochar”
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
122 more claims
Create a free account to see all 193 claims and to verify the 5 references still open.
- It may state two separate claims as one. 44
- Probably not a substantial claim. 29
- The quote only partly states this claim. 2
Citations
Cites
An overview of the chemical composition of biomass
Vassilev, S. V., Baxter, D., Andersen, L. K., & Vassileva, C. G. (2010) · Fuel · doi:10.1016/j.fuel.2009.10.022 · Cited by 2,519
The production of carbon materials by hydrothermal carbonization of cellulose
Sevilla, M., & Fuertes, A. B. (2009) · Carbon · doi:10.1016/j.carbon.2009.04.026 · Cited by 2,021
Libra, J. A., Ro, K. S., Kammann, C., Funke, A., Berge, N. D., Neubauer, Y., Titirici, M.-M., Fühner, C., Bens, O., Kern, J., et al. (2011) · Biofuels · doi:10.4155/bfs.10.81 · Cited by 1,756
Hydrothermal processing of lignocellulosic materials
Garrote, G., Domínguez, H., & Parajó, J. C. (1999) · Holz als Roh- und Werkstoff · doi:10.1007/s001070050039 · Cited by 880
Kumar, R., Mago, G., Balan, V., & Wyman, C. E. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2009.01.075 · Cited by 876
Hydrothermal Carbonization (HTC) of Lignocellulosic Biomass
Hoekman, S. K., Broch, A., & Robbins, C. (2011) · Energy & Fuels · doi:10.1021/ef101745n · Cited by 726
The behavior of inorganic material in biomass-fired power boilers: field and laboratory experiences
Baxter, L. L., Miles, T. R., Miles, T. R., Jenkins, B. M., Milne, T., Dayton, D., Bryers, R. W., & Oden, L. L. (1998) · Fuel Processing Technology · doi:10.1016/s0378-3820(97)00060-x · Cited by 669
Meyer, S., Glaser, B., & Quicker, P. (2011) · Environmental Science & Technology · doi:10.1021/es201792c · Cited by 660
Kabyemela, B. M., Adschiri, T., Malaluan, R. M., & Arai, K. (1999) · Industrial & Engineering Chemistry Research · doi:10.1021/ie9806390 · Cited by 592
Acid-Catalyzed Production of 5-Hydroxymethyl Furfural from d-Fructose in Subcritical Water
Salak Asghari, F., & Yoshida, H. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie051088y · Cited by 500
Research works printed but not linked: 2
- 4. Kappejan, J.; Van Loo, S. Biomass fuel properties and basic principles of biomass combustion. In The Handbook of Biomass Combustion and Co-Firing , 2nd ed.; Earthscan: London, UK, 2008; Volume 1, pp. 7-34.
- 27. Perry, R.H. Energy Resources, Conversation, and Utilization. In Chemical Engineering Handbook , 6th ed.; McGraw Hill: New York, NY, USA, 1984; Volume 1, pp. 3-21, 3-22, 3-38.
Cited by
Minireview of potential applications of hydrochar derived from hydrothermal carbonization of biomass
Fang, J., Zhan, L., Ok, Y. S., & Gao, B. (2018) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2017.08.026 · Cited by 600
Heidari, M., Dutta, A., Acharya, B., & Mahmud, S. (2019) · Journal of the Energy Institute · doi:10.1016/j.joei.2018.12.003 · Cited by 464
Self-citationLucian, M., & Fiori, L. (2017) · Energies · doi:10.3390/en10020211 · Cited by 316
Hydrothermal Carbonization of Fruit Wastes: A Promising Technique for Generating Hydrochar
Zhang, B., Heidari, M., Regmi, B., Salaudeen, S., Arku, P., Thimmannagari, M., & Dutta, A. (2018) · Energies · doi:10.3390/en11082022 · Cited by 131
Self-citationZhang, T., Wu, X., Shaheen, S. M., Zhao, Q. R., Liu, X., Rinklebe, J., & Ren, H. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122254 · Cited by 128
Díaz, B., Sommer-Márquez, A. E., Ordóñez, P. E., Bastardo-González, E., Ricaurte, M., & Navas-Cárdenas, C. A. (2024) · Resources · doi:10.3390/resources13010008 · Cited by 150
“Activation Moreover, carbon monoxide formation can increase the biochar surface area, improving its microporous structure and pore volume [27].”
BackgroundMihajlović, M. L., Petrović, J. T., Maletić, S. P., Isakovski, M. K., Stojanović, M. D., Lopičić, Z. R., & Trifunović, S. S. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.01.003 · Cited by 102
Study of hydrochar and process water from hydrothermal carbonization of sea lettuce
Shrestha, A., Acharya, B., & Farooque, A. A. (2021) · Renewable Energy · doi:10.1016/j.renene.2020.08.133 · Cited by 91
Singh, A. K., Sofian, A. D. A. B. A., Chan, Y. J., Chakrabarty, A., Selvarajoo, A., Abakr, Y. A., & Show, P. L. (2024) · GCB Bioenergy · doi:10.1111/gcbb.13150 · Cited by 85
“Biocoal has numerous applications besides fuel (Gamgoum et al., 2016; Messineo et al., 2012) for established coal-using sectors, such as utilities, cement, and brick manufacturers (Kruse et al., 2013); it can also be utilized as a raw material for the production of activated carbon (Titirici, 2013;…”
BackgroundBio-carbon production by oxidation and hydrothermal carbonization of paper recycling black liquor
Al-Kaabi, Z., Pradhan, R. R., Thevathasan, N. V., Gordon, A. D., Chiang, Y. W., & Dutta, A. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.12.175 · Cited by 63
Self-citationComprehensive Characterization of Some Selected Biomass for Bioenergy Production
Yahya, A. M., Adeleke, A. A., Nzerem, P., Ikubanni, P. P., Ayuba, S., Rasheed, H. A., Gimba, A., Okafor, I. S., Okolie, J. A., & Paramasivam, P. (2023) · ACS Omega · doi:10.1021/acsomega.3c05656 · Cited by 71
Subcritical water extraction of bioactive phenolic compounds from distillery stillage
Mikucka, W., Zielińska, M., Bułkowska, K., & Witońska, I. (2022) · Journal of Environmental Management · doi:10.1016/j.jenvman.2022.115548 · Cited by 67
Zhao, Y., Tian, Y., Zhou, H., & Tian, Y. (2020) · Fuel · doi:10.1016/j.fuel.2020.118651 · Cited by 45
Hydrothermal Carbonization of Biosolids from Waste Water Treatment Plant
Bhatt, D., Shrestha, A., Dahal, R. K., Acharya, B., Basu, P., & MacEwen, R. (2018) · Energies · doi:10.3390/en11092286 · Cited by 43
Nguyen, V. D., Luu, T.-A., Chang‐Chien, G., & Le, V. G. (2025) · Materials Advances · doi:10.1039/d5ma00872g · Cited by 53
Heidari, M. A., Salaudeen, S. A., Arku, P., Acharya, B., Tasnim, S. H., & Dutta, A. (2020) · Energy · doi:10.1016/j.energy.2020.119020 · Cited by 42
Self-citationAl-Kaabi, Z., Pradhan, R. R., Thevathasan, N. V., Chiang, Y. W., Gordon, A. D., & Dutta, A. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.02.074 · Cited by 39
Self-citationWaste-to-Energy Model/Tool Presentation
Kumar, S., & Ankaram, S. R. (2019) · Elsevier eBooks · doi:10.1016/b978-0-444-64083-3.00012-9 · Cited by 66
Beneficiation of renewable industrial wastes from paper and pulp processing
Al-Kaabi, Z., Pradhan, R. R., Thevathasan, N. V., Arku, P., Gordon, A., & Dutta, A. (2018) · AIMS energy · doi:10.3934/energy.2018.5.880 · Cited by 38
Self-citationMusa, U., Castro‐Díaz, M., Uguna, C. N., & Snape, C. E. (2022) · Fuel · doi:10.1016/j.fuel.2022.124784 · Cited by 32
Fallah, S., Alavi, N., Tavakoli, O., Shahsavani, A., & Sadani, M. (2023) · Energy Conversion and Management · doi:10.1016/j.enconman.2023.117647 · Cited by 31
The roles of carbonaceous wastes for catalysis, energy, and environmental remediation
Ng, C. H., Mistoh, M. A., Teo, S. H., Galassi, A., Taufiq‐Yap, Y. H., Siambun, N. J., Foo, J., Sipaut, C. S., Seay, J. R., & Janaun, J. (2024) · Catalysis Communications · doi:10.1016/j.catcom.2024.106845 · Cited by 28
Youn, H. S., Kim, S., Kim, G. H., & Um, B. H. (2022) · Fuel · doi:10.1016/j.fuel.2022.125738 · Cited by 23
Mallick, D., Sharma, S. D., Kushwaha, A., Brahma, H. S., Nath, R., & Bhowmik, R. (2021) · Elsevier eBooks · doi:10.1016/b978-0-323-85387-3.00012-4 · Cited by 37
Khataee, A., Kalderis, D., Motlagh, P. Y., Binas, V. D., Stefa, S., & Konsolakis, M. (2020) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2020.12.006 · Cited by 19
Lubura, J., Kočková, O., Strachota, B., Bera, O. J., Pavlová, E., Pavličević, J., Ikonić, B., Kojić, P. S., & Strachota, A. (2023) · Polymers · doi:10.3390/polym15102397 · Cited by 13
Fantucci, H., Aguirre, M., & Santos, R. M. (2021) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.1c01813 · Cited by 12
Self-citationLotfy, V. F., & Basta, A. H. (2019) · Royal Society Open Science · doi:10.1098/rsos.190173 · Cited by 11
Activated Carbon from Winemaking Waste: Thermoeconomic Analysis for Large-Scale Production
Lorero, I., Vizcaíno, A. J., Alguacil, F. J., & López, F. A. (2020) · Energies · doi:10.3390/en13236462 · Cited by 10
Miscanthus to Biocarbon for Canadian Iron and Steel Industries: An Innovative Approach
Abhi, T. D., Norouzi, O., MacDermid-Watts, K., Heidari, M. A., Tasnim, S. H., & Dutta, A. (2021) · Energies · doi:10.3390/en14154493 · Cited by 9
Self-citationKaradirek, Ş. (2025) · Diamond and Related Materials · doi:10.1016/j.diamond.2025.112139 · Cited by 5
Degradation of toxic components in kitchen waste during hydrothermal carbonization process
Zhang, X., Liu, H., Yang, G., & Yao, H. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.155746 · Cited by 5
Rasoulnia, P., Kokko, M. E., Kinnunen, V., & He, C. H. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.154061 · Cited by 4
Gajera, Z. R., Mungray, A. A., Rene, E. R., & Mungray, A. K. (2024) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-024-05863-0 · Cited by 4
“It is only because of the hydrolysis of cow dung, and it is converted from complex nitrogen compounds to amine compounds in process water during the hydrothermal process [86].”
Uji Kapasitas Adsorpsi Ion Logam Cu2+ Menggunakan Hidrochar Eichhornia Crassipes Termodifikasi H2o2
Khanifa, L. N., Mulyatun, M., & Suryandari, E. T. (2019) · Walisongo Journal of Chemistry · doi:10.21580/wjc.v2i2.6026 · Cited by 5
Iyer, A. V. (2019) · The Atrium (University of Guelph)
Fantucci, H. (2021) · The Atrium (University of Guelph) · doi:10.3390/su11154156 · Cited by 1
Kilonzi, F., Jagau, R., Hashemi, P., Jean‐Fulcrand, A., & Garnweitner, G. (2026) · Frontiers in Energy Research · doi:10.3389/fenrg.2026.1757714
Development of functional materials for the microplastics removal and treatment in surface water
Febrian, F., Purwaningsih, H., & Khotib, M. (2026) · Pure and Applied Chemistry · doi:10.1515/pac-2025-0650
Shin, M. C., Kim, Y. J., Youn, H. S., Lee, J. K., Hong, J., & Hwang, J. (2026) · Fuel · doi:10.1016/j.fuel.2026.141465
Metadata
- Authors
- Gamgoum, R., Dutta, A., Santos, R., & Chiang, Y.
- Affiliations
- University of Guelph (CA)
- School of Applied Chemical and Environmental Sciences, Sheridan Institute of Technology, 7899 McLaughlin Road, Brampton, ON L6Y 5H9, Canada
- Corresponding author
- Chiang, Yi
- Venue
- Energies
- Publisher
- MDPI AG
- Published
- 2016-06-03
- Volume
- 9
- Issue
- 6
- Pages
- 435
- ISSN
- 1996-1073 (ISSN-L)
- OpenAlex
- W2409245633
- Cited by
- 41
- References
- 35
- Citations by year
- 2026: 4 · 2025: 2 · 2024: 6 · 2023: 3 · 2022: 3 · 2021: 4 · 2020: 5 · 2019: 5 · 2018: 6 · 2017: 3
- FWCI
- 2.25
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Energies (publishedVersion, cc-by)
- TSpace (University of Toronto) (submittedVersion, cc-by)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- SOURCE Sheridan's Institutional Repository (Sheridan College) (submittedVersion, cc-by-nc-nd)
- Funders
- University of Guelph
- Topics
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Physical Sciences › Engineering › Mechanical Engineering › Coal Combustion and Slurry Processing
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Anaerobic Digestion and Biogas Production
- Keywords
- hydrochar, hydrothermal conversion, pulp mill effluent, chemical additives, acetic acid, reaction temperature, ash content, higher heating value, lignin, hemicellulose, cellulose, adsorbed water
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.