The DOI matches its Crossref record.
Hybrid AI–Taguchi–ANOVA Approach for Thermographic Monitoring of Electronic Devices
Abstract
Defects in printed circuit boards (PCBs), if not detected promptly, may persist over time until they cause the failure of critical components. Traditional monitoring methods, which are limited to simulations or superficial measurements, obstruct predictive maintenance and real-time fault detection. To address these issues and enhance real-time diagnostics of thermal anomalies in PCBs, this work proposes an integrated system that combines infrared thermography (IRT), artificial intelligence (AI) algorithms, and Taguchi–ANOVA statistical techniques. IR thermography was employed to identify thermal stresses in the devices during normal operation. The IR acquisitions were used to build a dataset for specialized AI model’s training, which combines thermal anomalies segmentation using U-Net with a Multilayer Perceptron (MLP) classifier for heat distribution patterns. The Taguchi method determines the optimal configuration of the selected parameters, while Analysis of Variance (ANOVA) evaluates the effect of each factor on the F1-score response. These techniques statistically validated the AI performance, confirming the optimal set of selected hyperparameters and quantifying their contribution to F1-score. The novelty of the study lies in the integration of real-time infrared thermography with an interpretable AI pipeline and a Taguchi–ANOVA statistical framework, which enables both optimisation and rigorous validation of AI performance under real-time operating conditions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“We note that restricted engineering and electronic device testing paradigms face a similar challenge with underpowered statistics, and deal with this via constrained Taguchi–ANOVA optimizations that also focus on effect-size results [28].”
From A Low-Cost, Accurate, and Easily-Worn E-Skin and IMU Hand Kinematic Measurement System (2026) · cites this paper as [28]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
No references could be resolved yet.
Research works printed but not linked: 89
- Zhao, 2024, Skin-inspired soft bioelectronic materials, devices and systems, Nat. Rev. Bioeng., 2, 671, 10.1038/s44222-024-00194-1 · DOI · Paper page
- Folgado, F.J., Calderón, D., González, I., and Calderón, A.J. (2024). Review of Industry 4.0 from the Perspective of Automation and Supervision Systems: Definitions, Architectures and Recent Trends. Electronics, 13. · DOI · Paper page
- Bandara, R.M.P.N.S., Jayasignhe, A.B., and Retscher, G. (2025). The Integration of IoT (Internet of Things) Sensors and Location-Based Services for Water Quality Monitoring: A Systematic Literature Review. Sensors, 25. · DOI
- Laganà, F., Pellicanò, D., Arruzzo, M., Pratticò, D., Pullano, S.A., and Fiorillo, A.S. (2025). FEM-Based Modelling and AI-Enhanced Monitoring System for Upper Limb Rehabilitation. Electronics, 14. · DOI
- Rind, Y.M., Raza, M.H., Zubair, M., Mehmood, M.Q., and Massoud, Y. (2023). Smart Energy Meters for Smart Grids, an Internet of Things Perspective. Energies, 16. · DOI
- Witczak, D., and Szymoniak, S. (2024). Review of Monitoring and Control Systems Based on Internet of Things. Appl. Sci., 14. · DOI
- Bibbò, L., Laganà, F., Bilotta, G., Meduri, G.M., Angiulli, G., and Cotroneo, F. (2025). AI-Enhanced Eco-Efficient UAV Design for Sustainable Urban Logistics: Integration of Embedded Intelligence and Renewable Energy Systems. Energies, 18. · doi:10.3390/en18195242
- Menniti, M., Oliva, G., Laganà, F., Bianco, M.G., Fiorillo, A.S., and Pullano, S.A. (2023, January 14–16). Portable Non-Invasive Ventilator for Homecare and Patients Monitoring System. Proceedings of the 2023 IEEE International Symposium on Medical Measurements and Applications (MeMeA), Jeju, Korea. · doi:10.1109/memea57477.2023.10171872
- Jagatheesaperumal, 2024, Deep learning for personalized health monitoring and prediction: A review, Comput. Intell., 40, e12682, 10.1111/coin.12682 · DOI
- Mila, 2025, IoT for Continuous Physiological Parameters Monitoring in Healthcare: A Review, IEEE Sens. J., 25, 34311, 10.1109/JSEN.2025.3597861 · DOI
- Zhang, 2024, Field effect transistor biosensors for healthcare monitoring, Interdiscip. Med., 2, e20240032, 10.1002/INMD.20240032 · DOI
- Almusaed, A., Yitmen, I., and Almssad, A. (2023). Reviewing and Integrating AEC Practices into Industry 6.0: Strategies for Smart and Sustainable Future-Built Environments. Sustainability, 15. · doi:10.20944/preprints202308.0860.v1
- Wang, 2024, From BIM to digital twin in BIPV: A review of current knowledge, Sustain. Energy Technol. Assess., 67, 103855
- 2023, Analysis of emotions in the use of augmented reality technologies in education: A systematic review, Comput. Appl. Eng. Educ., 31, 216, 10.1002/cae.22593 · DOI
- Dai, S., Shen, P., Deng, W., and Yu, Q. (2024). Hydrogen Energy in Electrical Power Systems: A Review and Future Outlook. Electronics, 13. · DOI
- Pratticò, D., Carlo, D.D., Silipo, G., and Laganà, F. (2025). Hybrid FEM-AI Approach for Thermographic Monitoring of Biomedical Electronic Devices. Computers, 14. · DOI
- Sankar, 2022, A review of various defects in PCB, J. Electron. Test., 38, 481, 10.1007/s10836-022-06026-7 · doi:10.1007/s10836-022-06026-7
- Abdollahi-Mamoudan, F., Ibarra-Castanedo, C., and Maldague, X.P.V. (2025). Non-Destructive Testing and Evaluation of Hybrid and Advanced Structures: A Comprehensive Review of Methods, Applications, and Emerging Trends. Sensors, 25. · doi:10.20944/preprints202505.0910.v1
- Molęda, M., Małysiak-Mrozek, B., Ding, W., Sunderam, V., and Mrozek, D. (2023). From Corrective to Predictive Maintenance—A Review of Maintenance Approaches for the Power Industry. Sensors, 23. · DOI · Paper page
- Laganà, F., Bibbò, L., Calcagno, S., De Carlo, D., Pullano, S.A., Pratticò, D., and Angiulli, G. (2025). Smart Electronic Device-Based Monitoring of SAR and Temperature Variations in Indoor Human Tissue Interaction. Appl. Sci., 15. · DOI
- Kumar, 2023, Machine learning techniques in additive manufacturing: A state of the art review on design, processes and production control, J. Intell. Manuf., 34, 21, 10.1007/s10845-022-02029-5 · DOI · Paper page
- Xie, 2024, Designing semiconductor materials and devices in the post-Moore era by tackling computational challenges with data-driven strategies, Nat. Comput. Sci., 4, 322, 10.1038/s43588-024-00632-5 · DOI
- Dalloo, 2024, Approximate computing: Concepts, architectures, challenges, applications, and future directions, IEEE Access, 12, 146022, 10.1109/ACCESS.2024.3467375 · DOI
- Liu, 2023, Materials and biomedical applications of implantable electronic devices, Adv. Mater. Technol., 8, 2200853, 10.1002/admt.202200853 · DOI
- Pullano, S.A., Oliva, G., Titirsha, T., Shuvo, M.M.H., Islam, S.K., Laganà, F., La Gatta, A., and Fiorillo, A.S. (2024). Design of an Electronic Interface for Single-Photon Avalanche Diodes. Sensors, 24. · doi:10.3390/s24175568
- Roy, 2022, Powering solutions for biomedical sensors and implants inside the human body: A comprehensive review on energy harvesting units, energy storage, and wireless power transfer techniques, IEEE Trans. Power Electron., 37, 12237, 10.1109/TPEL.2022.3164890 · DOI · Paper page
- Chen, 2023, A comprehensive review of deep learning-based PCB defect detection, IEEE Access, 11, 139017, 10.1109/ACCESS.2023.3339561 · DOI
- Khalili, 2025, A comprehensive review of failure modes in electrical submersible pumps: Diagnosis, predictive maintenance, and engineer’s guide, Arab. J. Sci. Eng., 50, 20445, 10.1007/s13369-025-10536-9 · DOI
- Balakrishnan, G.K., Yaw, C.T., Koh, S.P., Abedin, T., Raj, A.A., Tiong, S.K., and Chen, C.P. (2022). A Review of Infrared Thermography for Condition-Based Monitoring in Electrical Energy: Applications and Recommendations. Energies, 15. · DOI
- Kim, R.G., Abisado, M., Villaverde, J., and Sampedro, G.A. (2023). A Survey of Image-Based Fault Monitoring in Additive Manufacturing: Recent Developments and Future Directions. Sensors, 23. · DOI
- Zhang, 2024, YOLO-RRL: A Lightweight Algorithm for PCB Surface Defect Detection, Appl. Sci., 14, 7460, 10.3390/app14177460 · DOI
- Ural, 2024, Research on PCB defect detection using artificial intelligence: A systematic mapping study, Evol. Intell., 17, 3101, 10.1007/s12065-024-00930-x · DOI
- Eisentraut, 2025, Defect Detection in Industrial Soldering Processes Using Machine Learning: A Critical Literature Review, IEEE Access, 13, 41533, 10.1109/ACCESS.2025.3547847 · DOI
- Kalita, 2023, Finite element modelling, predictive modelling and optimization of metal inert gas, tungsten inert gas and friction stir welding processes: A comprehensive review, Arch. Comput. Methods Eng., 30, 271, 10.1007/s11831-022-09797-6 · doi:10.1007/s11831-022-09797-6
- Hassani, S., and Dackermann, U. (2023). A Systematic Review of Optimization Algorithms for Structural Health Monitoring and Optimal Sensor Placement. Sensors, 23. · DOI · Paper page
- Bibbò, L., Angiulli, G., Laganà, F., Pratticò, D., Cotroneo, F., La Foresta, F., and Versaci, M. (2025). MEMS and IoT in HAR: Effective Monitoring for the Health of Older People. Appl. Sci., 15. · DOI
- Alemaryeen, A., and Noghanian, S. (2023). A Survey of the Thermal Analysis of Implanted Antennas for Wireless Biomedical Devices. Micromachines, 14. · doi:10.3390/mi14101894
- Benelhaouare, A.Z., Mellal, I., Saydé, M., Nicolescu, G., and Lakhssassi, A. (2025). Thermal Side-Channel Threats in Densely Integrated Microarchitectures: A Comprehensive Review for Cyber–Physical System Security. Micromachines, 16. · doi:10.3390/mi16101152
- Seckin, M., Demircioglu, P., Seckin, A.C., Bogrekci, I., and Aksoy, S. (2025). Artificial Intelligence for Non-Destructive Imaging in Composite Materials. Eng, 6. · doi:10.3390/eng6030046
- De Carlo, D., Laganà, F., Pratticò, D., and Pullano, S.A. (2024, January 14–15). Development of an integrated system for remote monitoring of circuit integrity in biomedical devices. Proceedings of the 2024 E-Health and Bioengineering Conference (EHB), Iasi, Romania. · DOI
- Laganà, F., Pullano, S.A., Angiulli, G., and Versaci, M. (2024). Optimized Analytical–Numerical Procedure for Ultrasonic Sludge Treatment for Agricultural Use. Algorithms, 17. · DOI
- Ukiwe, 2023, Techniques of infrared thermography for condition monitoring of electrical power equipment, J. Electr. Syst. Inf. Technol., 10, 49, 10.1186/s43067-023-00115-z · DOI
- Wahlquist, S., and Ali, A. (2024). Roles of Modeling and Artificial Intelligence in LPBF Metal Print Defect Detection: Critical Review. Appl. Sci., 14. · doi:10.3390/app14188534
- Varvari, A.A., Pitilakis, A., Karatzidis, D.I., and Kantartzis, N.V. (2024). Thyroid Screening Techniques via Bioelectromagnetic Sensing: Imaging Models and Analytical and Computational Methods. Sensors, 24. · doi:10.3390/s24186104
- Dritsa, V., Orazi, N., Yao, Y., Paoloni, S., Koui, M., and Sfarra, S. (2022). Thermographic Imaging in Cultural Heritage: A Short Review. Sensors, 22. · doi:10.3390/s22239076
- Yang, 2024, Recent advances in fault diagnosis techniques for photovoltaic systems: A critical review, Prot. Control Mod. Power Syst., 9, 36, 10.23919/PCMP.2023.000583 · DOI
- Zhang, 2025, Biomimetic Intelligent Thermal Management Materials: From Nature-Inspired Design to Machine-Learning-Driven Discovery, Adv. Mater., 37, 2503140, 10.1002/adma.202503140 · DOI
- Zhao, X., Zhao, Y., Hu, S., Wang, H., Zhang, Y., and Ming, W. (2023). Progress in Active Infrared Imaging for Defect Detection in the Renewable and Electronic Industries. Sensors, 23. · DOI
- Barraz, Z., Sebari, I., Ait El Kadi, K., and Ait Abdelmoula, I. (2025). Towards a Holistic Approach for UAV-Based Large-Scale Photovoltaic Inspection: A Review on Deep Learning and Image Processing Techniques. Technologies, 13. · DOI
- Wilson, 2023, Recent advances in thermal imaging and its applications using machine learning: A review, IEEE Sens. J., 23, 3395, 10.1109/JSEN.2023.3234335 · DOI · Paper page
- Hu, S., Li, F., and Zuo, P. (2023). Numerical Simulation of Laser Transmission Welding—A Review on Temperature Field, Stress Field, Melt Flow Field, and Thermal Degradation. Polymers, 15. · doi:10.3390/polym15092125
- Raza, 2025, Integration of response surface methodology (RSM), machine learning (ML), and artificial intelligence (AI) for enhancing properties of polymeric nanocomposites-A review, Polym. Compos., 46, 13591, 10.1002/pc.30011 · DOI
- Panico, M., and Boccarusso, L. (2025). Smart Drilling: Integrating AI for Process Optimisation and Quality Enhancement in Manufacturing. J. Manuf. Mater. Process., 9. · DOI
- Morales Matamoros, O., Takeo Nava, J.G., Moreno Escobar, J.J., and Ceballos Chávez, B.A. (2025). Artificial Intelligence for Quality Defects in the Automotive Industry: A Systemic Review. Sensors, 25. · DOI
- Sasithradevi, 2025, Advanced thermal vision techniques for enhanced fault diagnosis in electrical equipment: A review, Int. J. Syst. Assur. Eng. Manag., 16, 1914, 10.1007/s13198-025-02782-9 · DOI
- Zhu, 2024, Enabling intelligent connectivity: A survey of secure ISAC in 6g networks, IEEE Commun. Surv. Tutor., 27, 748, 10.1109/COMST.2024.3432871 · DOI · Paper page
- Ruffolo, S.A., La Russa, M.F., Rovella, N., and Ricca, M. (2023). The Impact of Air Pollution on Stone Materials. Environments, 10. · DOI
- Tai, J.L., Sultan, M.T.H., Łukaszewicz, A., Józwik, J., Oksiuta, Z., and Shahar, F.S. (2025). Recent Trends in Non-Destructive Testing Approaches for Composite Materials: A Review of Successful Implementations. Materials, 18. · DOI
- Poncetti, B.L., Ruiz, D.V., Assis, L.S.d., Machado, L.B., Silva, T.B.d., Akinlalu, A.A., and Futai, M.M. (2025). Tunnel Inspection Review: Normative Practices and Non-Destructive Method Advancements for Tunnels with Concrete Cover. Appl. Mech., 6. · DOI
- Boldrin, 2024, Review of Ground Penetrating Radar Applications for Bridge Infrastructures, NDT, 2, 53, 10.3390/ndt2010004 · doi:10.3390/ndt2010004
- Shen, X., Lu, X., Guo, J., Liu, Y., Qi, J., and Lv, Z. (2024). Nondestructive Testing of Metal Cracks: Contemporary Methods and Emerging Challenges. Crystals, 14. · DOI
- Abhisheka, 2024, Recent trend in medical imaging modalities and their applications in disease diagnosis: A review, Multimed. Tools Appl., 83, 43035, 10.1007/s11042-023-17326-1 · DOI · Paper page
- Potentas-Policewicz, M., and Fijolek, J. (2024). Granulomatosis with polyangiitis: Clinical characteristics and updates in diagnosis. Front. Med., 11. · DOI
- Li, 2023, 3D LiDAR and multi-technology collaboration for preservation of built heritage in China: A review, Int. J. Appl. Earth Obs. Geoinf., 116, 103156
- Galantucci, 2023, Condition Assessment of Heritage Buildings via Photogrammetry: A Scoping Review from the Perspective of Decision Makers, Heritage, 6, 7031, 10.3390/heritage6110367 · DOI
- Ye, 2025, Application of spectroscopy technique in cultural heritage: Systematic review and bibliometric analysis, npj Herit. Sci., 13, 169, 10.1038/s40494-025-01622-0 · DOI
- Sutherland, N., Marsh, S., Priestnall, G., Bryan, P., and Mills, J. (2023). InfraRed Thermography and 3D-Data Fusion for Architectural Heritage: A Scoping Review. Remote Sens., 15. · DOI
- Rossi, M., and Bournas, D. (2023). Structural Health Monitoring and Management of Cultural Heritage Structures: A State-of-the-Art Review. Appl. Sci., 13. · DOI
- Yogurtcu, B., Cebi, N., Koçer, A.T., and Erarslan, A. (2024). A Review of Non-Destructive Raman Spectroscopy and Chemometric Techniques in the Analysis of Cultural Heritage. Molecules, 29. · DOI
- Sadaf, M., Bragaglia, M., Slemenik Perše, L., and Nanni, F. (2024). Advancements in Metal Additive Manufacturing: A Comprehensive Review of Material Extrusion with Highly Filled Polymers. J. Manuf. Mater. Process., 8. · DOI
- Wang, W., Chen, J., Han, G., Shi, X., and Qian, G. (2024). Application of Object Detection Algorithms in Non-Destructive Testing of Pressure Equipment: A Review. Sensors, 24. · DOI
- Grujić, K. (2023). A Review of Thermal Spectral Imaging Methods for Monitoring High-Temperature Molten Material Streams. Sensors, 23. · DOI
- Wang, 2023, Recent research progress on the passivation and selective oxidation for the 3d-transition-metal and refractory multi-principal element alloys, npj Mater. Degrad., 7, 86, 10.1038/s41529-023-00410-0 · DOI
- Mohsin, M., Rovetta, S., Masulli, F., and Cabri, A. (2025). Artificial Intelligence Approach for Waste-Printed Circuit Board Recycling: A Systematic Review. Computers, 14. · DOI
- Khonina, S.N., Kazanskiy, N.L., Oseledets, I.V., Khabibullin, R.M., and Nikonorov, A.V. (2025). Eyes of the Future: Decoding the World Through Machine Vision. Technologies, 13. · DOI
- Kim, H., Lamichhane, N., Kim, C., and Shrestha, R. (2023). Innovations in Building Diagnostics and Condition Monitoring: A Comprehensive Review of Infrared Thermography Applications. Buildings, 13. · DOI
- Pratticò, D., and Laganà, F. (2025). Infrared Thermographic Signal Analysis of Bioactive Edible Oils Using CNNs for Quality Assessment. Signals, 6. · DOI
- Liu, 2024, Topological thermal transport, Nat. Rev. Phys., 6, 554, 10.1038/s42254-024-00745-w · DOI
- Harrison, 2023, Physics of gases, Anaesth. Intensive Care Med., 24, 772, 10.1016/j.mpaic.2023.09.005 · doi:10.1016/j.mpaic.2023.09.005
- Verzicco, 2023, Immersed boundary methods: Historical perspective and future outlook, Annu. Rev. Fluid Mech., 55, 129, 10.1146/annurev-fluid-120720-022129 · DOI · Paper page
- Lei, 2023, Recent advances in thermoregulatory clothing: Materials, mechanisms, and perspectives, ACS Nano, 17, 1803, 10.1021/acsnano.2c10279 · DOI · Paper page
- Hisam, 2024, The versatility of the Taguchi method: Optimizing experiments across diverse disciplines, J. Stat. Theory Appl., 23, 365, 10.1007/s44199-024-00093-9 · doi:10.1007/s44199-024-00093-9
- 2025, Parametric optimisation of a pulmonary ventilator using the Taguchi method, J. Electr. Eng., 76, 265, 10.2478/jee-2025-0027 · DOI
- Vrbin, 2022, Parametric or nonparametric statistical tests: Considerations when choosing the most appropriate option for your data, Cytopathology, 33, 663, 10.1111/cyt.13174 · DOI
- Oviedo, 2024, ISO/IEC quality standards for AI engineering, Comput. Sci. Rev., 54, 100681, 10.1016/j.cosrev.2024.100681 · DOI
- Jahanbani, 2024, Data-driven artificial intelligence-based streamflow forecasting, a review of methods, applications, and tools, JAWRA J. Am. Water Resour. Assoc., 60, 1095, 10.1111/1752-1688.13229 · DOI
- Khuat, T.T., Bassett, R., Otte, E., Grevis-James, A., and Gabrys, B. (2023). Applications of machine learning in biopharmaceutical process development and manufacturing: Current trends, challenges, and opportunities. arXiv. · DOI
- Ulusoy, U. (2023). A Review of Particle Shape Effects on Material Properties for Various Engineering Applications: From Macro to Nanoscale. Minerals, 13. · DOI · Paper page
- Maltoni, D., Maio, D., Jain, A.K., and Feng, J. (2022). Fingerprint sensing. Handbook of Fingerprint Recognition, Springer. · doi:10.1007/978-3-030-83624-5
Cited by
A Low-Cost, Accurate, and Easily-Worn E-Skin and IMU Hand Kinematic Measurement System
Oppenheim, T., Schlegel, H., Xie, P. Y., Khokhar, Z., & Khanna, P. (2026) · Sensors · doi:10.3390/s26154795
Metadata
- Authors
- Laganà, F., Pratticò, D., Quattrone, M. F., Pullano, S. A., & Calcagno, S.
- Venue
- Eng
- Publisher
- MDPI AG
- Published
- 2026-01-06
- Volume
- 7
- Issue
- 1
- Pages
- 28
- ISSN
- 2673-4117
- Cited by
- 33
- References
- 0
- Language
- en
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Hybrid AI–Taguchi–ANOVA Approach for Thermographic Monitoring of Electronic Devices. https://app.cochat.ai/papers/10.3390/eng7010028
- The paper
- Laganà, F., Pratticò, D., Quattrone, M. F., Pullano, S. A., & Calcagno, S. (2026). Hybrid AI–Taguchi–ANOVA Approach for Thermographic Monitoring of Electronic Devices. Eng. https://doi.org/10.3390/eng7010028
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.