Methacrylated Silk Fibroin Additive Manufacturing of Shape Memory Constructs with Possible Application in Bone Regeneration
Open accessThe DOI matches its Crossref record; 51 of the 53 references it cites were found in a registry or an index.
Abstract
Methacrylated silk (Sil-MA) is a chemically modified silk fibroin specifically designed to be crosslinkable under UV light, which makes this material applicable in additive manufacturing techniques and allows the prototyping and development of patient-specific 2D or 3D constructs. In this study, we produced a thin grid structure based on crosslinked Sil-MA that can be withdrawn and ejected and that can recover its shape after rehydration. A complete chemical and physical characterization of Sil-MA was first conducted. Additionally, we tested Sil-MA biocompatibility according to the International Standard Organization protocols (ISO 10993) ensuring the possibility of using it in future trials. Sil-MA was also tested to verify its ability to support osteogenesis. Overall, Sil-MA was shown to be biocompatible and osteoconductive. Finally, two different additive manufacturing technologies, a Digital Light Processing (DLP) UV projector and a pneumatic extrusion technique, were used to develop a Sil-MA grid construct. A proof-of-concept of its shape-memory property was provided. Together, our data support the hypothesis that Sil-MA grid constructs can be injectable and applicable in bone regeneration applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures







Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“In particular, methacrylated silk fibroin (SFMA) has been used to enhance crosslinking density and modulate mechanical behavior in composite hydrogels [19,20,21].”
From Montmorillonite-reinforced methacrylated collagen/methacrylated silk fibroin hydrogel-based inks: rheological and physicochemical characterization for bone scaffold applications (2026) · cites this paper as [20]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The FTIR of pure GMA shows bands at 1265 cm⁻¹, corresponding to C-OH stretching of the alcohol formed after epoxide ring opening, and at 1165 and 951 cm⁻¹, representing CH₂ stretching and rocking vibrations of the methacrylate vinyl group (Figure 1D) [19,20].”
From Montmorillonite-reinforced methacrylated collagen/methacrylated silk fibroin hydrogel-based inks: rheological and physicochemical characterization for bone scaffold applications (2026) · cites this paper as [20]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The lower concentration of free primary amine groups observed for both SF and SilMA compared with collagen is consistent with the intrinsic amino acid composition of silk fibroin, which is predominantly composed of glycine, alanine, and serine, while containing relatively few lysine residues [20], [21].”
From Montmorillonite-reinforced methacrylated collagen/methacrylated silk fibroin hydrogel-based inks: rheological and physicochemical characterization for bone scaffold applications (2026) · cites this paper as [20]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Matrix elasticity directs stem cell lineage specification
Engler, A. J., Sen, S., Sweeney, H. L., & Discher, D. E. (2006) · Cell · doi:10.1016/j.cell.2006.06.044 · Cited by 13,915 · cited 1×
“In particular, Sil-MA gels were reported having compressive and elastic moduli increasing with Sil-MA concentration, achieving 130 kPA in compression and 15 kPa in tension for gels produced with a 30% Sil-MA solution [27]; these values are close to the elasticity modulus of the normal bone extracellular matrix (ECM),…”
BackgroundHydrogel: Preparation, characterization, and applications: A review
Ahmed, E. M. (2015) · Journal of Advanced Research · doi:10.1016/j.jare.2013.07.006 · Cited by 5,800
Biomedical applications of hydrogels: A review of patents and commercial products
Caló, E., & Khutoryanskiy, V. V. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2014.11.024 · Cited by 2,634
Vepari, C., & Kaplan, D. L. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.05.013 · Cited by 2,561 · cited 1×
“SF is biocompatible [14,15], bioresorbable [16,17], and, when used in the form of gel and film, it is transparent [18–20].”
BackgroundAlginate Hydrogels as Biomaterials
Augst, A. D., Kong, H. J., & Mooney, D. J. (2006) · Macromolecular Bioscience · doi:10.1002/mabi.200600069 · Cited by 1,839 · cited 1×
“, chitosan [6], keratin [7], alginate [8], agarose [9], cellulose [10]), silk”
BackgroundTranslational Applications of Hydrogels
Correa, S., Grosskopf, A. K., Lopez Hernandez, H., Chan, D., Yu, A. C., Stapleton, L. M., & Appel, E. A. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01177 · Cited by 1,143
Hydrogels for Biomedical Applications: Their Characteristics and the Mechanisms behind Them
Chai, Q., Jiao, Y., & Yu, X. (2017) · Gels · doi:10.3390/gels3010006 · Cited by 1,072
Precisely printable and biocompatible silk fibroin bioink for digital light processing 3D printing
Kim, S. H., Yeon, Y. K., Lee, J. M., Chao, J. R., Lee, Y. J., Seo, Y. B., Sultan, M. T., Lee, O. J., Lee, J. S., Yoon, S.-I., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-03759-y · Cited by 972
Biodegradation of Silk Biomaterials
Cao, Y., & Wang, B. (2009) · International Journal of Molecular Sciences · doi:10.3390/ijms10041514 · Cited by 713 · cited 1×
“SF is biocompatible [14,15], bioresorbable [16,17], and, when used in the form of gel and film, it is transparent [18–20].”
BackgroundBioactive hydrogels for bone regeneration
Bai, X., Gao, M., Syed, S., Zhuang, J., Xu, X., & Zhang, X.-Q. (2018) · Bioactive Materials · doi:10.1016/j.bioactmat.2018.05.006 · Cited by 556 · cited 1×
“Moreover, hydrogels are absorbable, and they have excellent integration with surrounding biological tissues, limiting the possibility of inflammatory or immune responses [5].”
Background
Cited by
Alparslan, C., & Bayraktar, Ş. (2025) · Polymers · doi:10.3390/polym17091287 · Cited by 83
“In the future, it is recommended to verify the effectiveness of these structures in bone regeneration using in vivo tests [86].”
Silk fibroin-based inks for in situ 3D printing using a double crosslinking process
Agostinacchio, F., Fitzpatrick, V., Dirè, S., Kaplan, D. L., & Motta, A. (2024) · Bioactive Materials · doi:10.1016/j.bioactmat.2024.01.015 · Cited by 58
Applications of silk-based biomaterials in biomedicine and biotechnology
Babu, P. J., & Suamte, L. (2023) · Engineered Regeneration · doi:10.1016/j.engreg.2023.11.002 · Cited by 56
4D printing for bone implant: Progress, advantages and challenges
Yang, F. Y., Ding, W., Jia, J., Shuai, C., & Feng, P. (2025) · Progress in Materials Science · doi:10.1016/j.pmatsci.2025.101591 · Cited by 50
4D Printed Protein‐AuNR Nanocomposites with Photothermal Shape Recovery
Yu, S., Sadaba, N., Sanchez‐Rexach, E., Hilburg, S. L., Pozzo, L. D., Altın, G., Liz‐Marzán, L. M., de Aberasturi, D. J., Sardón, H., & Nelson, A. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202311209 · Cited by 43
Shashikumar, U., Saraswat, A., Deshmukh, K., Hussain, C. M., Chandra, P., Tsai, P., Huang, P., Chen, Y., Ke, L., Lin, Y., et al. (2024) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2024.103163 · Cited by 47
4D printing of smart scaffolds for bone regeneration: a systematic review
Gharehdaghi, N., Nokhbatolfoghahaei, H., & Khojasteh, A. (2024) · Biomedical Materials · doi:10.1088/1748-605x/ad8f80 · Cited by 44
“Among hydrogels, one study used oxidized and methacrylated alginate (OMA) as the primary material for its high swelling ratio and shape folding effect [41], and the other study employed methacrylated silk fibroin (sil-MA) for its high mechanical strength and shape recovery effect [34].”
InfluentialHe, X., Wang, R., Zhou, F., & Liu, H. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.128031 · Cited by 24
Nanocomposite Methacrylated Silk Fibroin-Based Scaffolds for Bone Tissue Engineering
Spessot, E., Passuello, S., Shah, L., Maniglio, D., & Motta, A. (2024) · Biomimetics · doi:10.3390/biomimetics9040218 · Cited by 14
“Glycidyl methacrylate (GMA) can be used to modify the amine side groups on the lysine present in the SF primary structure, to obtain aqueous solutions of methacrylated silk fibroin (SilMA) [28].”
BackgroundSelf-citationOuyang, L., He, X., Liao, Y., Zhou, X., Liao, J., Lin, Z., Xie, X., Hu, W., Zhang, W., Al-Smadi, F., et al. (2026) · Bone Research · doi:10.1038/s41413-025-00482-5 · Cited by 17
“207 The impact of different crosslinking methods on its piezoelectric effect is not yet evident.”
Agostinacchio, F., Biada, E., Gambari, L., Grassi, F., Bucciarelli, A., & Motta, A. (2024) · Biomaterials Advances · doi:10.1016/j.bioadv.2024.213887 · Cited by 13
Self-citationGhosh, A., Bera, A. K., Ghosh, S., Singh, V., Basu, S., & Pati, F. (2024) · Biofabrication · doi:10.1088/1758-5090/ad9409 · Cited by 12
“Still, it is reported that the hydrogel gradually stiffens due to β -crystal induction within the polymeric system [129–134].”
Ghosh, A., Bera, A. K., Adhikari, J., Ghosh, S., Singh, V., Basu, S., & Pati, F. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.141761 · Cited by 10
Enhancing the Versatility of Photocrosslinkable Silk Fibroin Using an Eco‐Friendly Solvent
Brooks, A. K., & Yadavalli, V. K. (2025) · Advanced Engineering Materials · doi:10.1002/adem.202402401 · Cited by 11
“[25, 26] Combinations with other (bio)polymers have often been sought to remedy this.”
Sigusch, B. W., Kranz, S., von Hohenberg, A. C., Wehle, S., Guellmar, A., Steen, D., Berg, A., Rabe, U., Heyder, M., & Reise, M. (2023) · International Journal of Molecular Sciences · doi:10.3390/ijms24076200 · Cited by 9
“It was shown that scaffolds from methacrylated silk are biocompatible and present reliable osteoconductive features [38].”
BackgroundMetronidazole-laden silk fibroin methacrylated scaffolds for managing periapical lesions
Silverberg, A., Cardoso, L. M., de Carvalho, A. B. G., dos Reis‐Prado, A. H., Fenno, J. C., Dal‐Fabbro, R., & Bottino, M. C. (2024) · Odontology · doi:10.1007/s10266-024-01023-y · Cited by 8
“Methacrylated silk (SilkMA) is a chemically modified form of silk fibroin engineered to be cross-linkable under light exposure [9].”
Liu, B., Zhang, L., Guan, X., Liu, J., Shou, W., Chen, X., Li, X., & Cao, D. (2025) · Journal of Translational Medicine · doi:10.1186/s12967-025-06603-2 · Cited by 5
“…years, silk fibroin meth-acryloyl (SilMA), a photosensitive material for SF, has been widely used for the regeneration of cartilage tissue [16, 17], and the interpenetrating network (IPN) hydrogel [18] formed by SilMA and GelMA has been applied to the regeneration of vasculature and skin [19,…”
Acrylation of bioresources for 3D printing: strategies, technologies, and applications
Abdullah, T., Kaçakgil, E. C., Gedik, F., Akbulut, V. M., & Dizman, C. (2025) · Progress in Materials Science · doi:10.1016/j.pmatsci.2025.101641 · Cited by 5
Effect of Sterilization Methods on the Physicochemical Properties of Silk Fibroin Hydrogels
Busatto, C. A., Callone, E., Chio, M. D., Dirè, S., Laomeephol, C., Decimo, I., Fasolo, A., Ferrari, S., Bonacci, E., Pedrotti, E., et al. (2026) · Polymers · doi:10.3390/polym18131625 · Cited by 2
“The degree of methacrylation of SilMA was determined using the TNBS assay [24].”
Mushtaq, A., Do, K. L., Ahsan, T., Ashiq, S., An, W., Su, M., & Yousaf, M. (2026) · Gels · doi:10.3390/gels12070654 · Cited by 2
“Unlike GelMA photo-crosslinking, SilMA hydrogels exhibit better mechanical adaptability and multi-stimuli responses via the formation of β -sheets [71].”
Bucciarelli, A., Pedranz, A., Gambari, L., Petretta, M., Vivarelli, L., Dallari, D., Grigolo, B., Maniglio, D., & Grassi, F. (2023) · Advanced Materials Technologies · doi:10.1002/admt.202300635 · Cited by 2
Self-citationBorciani, G., Bucciarelli, A., Battistelli, M., van der Beek, A., Spessot, E., Maniglio, D., Ito, K., Grigolo, B., & Olivotto, E. (2026) · Biomaterials Advances · doi:10.1016/j.bioadv.2026.214843 · Cited by 1
Self-citationAntunes, B. S. L., Pedrini, F., Komatsu, D., Asami, J., Dicko, C., & Duek, E. A. R. (2026) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2026.154129
Natural Materials in Regenerative Orthopaedics: A Historical Perspective
Vasilev, O., Campbell, D. K., & Jaarsma, R. L. (2025) · Regenerative medicine and dentistry. · doi:10.53941/rmd.2025.100007 · Cited by 2
Wu, C. A., Zhu, Y., Stark, C. J., Lee, S. H., Huynh, C., LaMay, J. P., & Woo, Y.-P. J. (2025) · Journal of Materials Chemistry B · doi:10.1039/d5tb01578b
Gao, X., Ma, M., Qian, J., & Wang, L. (2025) · Food Bioscience · doi:10.1016/j.fbio.2025.108179
Development of a Simple and Efficient Method for the Micropatterning of Silk Fibroin
Choudhary, H. B., Das, S., Gurram, N. R., Rajagopalan, V., Kommajosyula, S. P., & Pal, R. K. (2026) · ACS Omega · doi:10.1021/acsomega.5c08840
Biopolymer‐Based Biomaterials as Feedstock Materials for Additive Manufacturing
Łabowska, M. B., Cieślak, A., Skrodzka, M., Szymczyk‐Ziółkowska, P., Adamczyk, A., & Detyna, J. (2026) · Wiley eBooks · doi:10.1002/9781394333400.ch3
Morgan, M., Zhang, B., & Narayan, R. J. (2026) · Advanced Engineering Materials · doi:10.1002/adem.202502238
“In addition, they evaluated the shape-memory properties of a scaffold made from this material [76].”
Wang, D., Li, J., Wang, Y., Bao, Z., & Yue, W. (2026) · Gels · doi:10.3390/gels12100894
Metadata
- Authors
- Bucciarelli, A., Petretta, M., Grigolo, B., Gambari, L., Bossi, A. M., Grassi, F., & Maniglio, D.
- Affiliations
- Istituto Ortopedico Rizzoli (IT)
- University of Verona (IT)
- University of Trento (IT)
- Corresponding author
- Bucciarelli, Alessio
- Maniglio, Devid
- ORCID
- Venue
- Gels
- Publisher
- MDPI AG
- Published
- 2022-12-16
- Volume
- 8
- Issue
- 12
- Pages
- 833
- ISSN
- 2310-2861 (ISSN-L)
- PMC
- PMC9777907
- OpenAlex
- W4312129977
- Cited by
- 31
- References
- 53
- Citations by year
- 2026: 10 · 2025: 9 · 2024: 7 · 2023: 5
- FWCI
- 1.23
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Gels (publishedVersion, cc-by)
- Preprints.org (acceptedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- Institutional Research Information System (Università degli Studi di Trento) (submittedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Istituto Ortopedico Rizzoli di Bologna
- Topics
- Physical Sciences › Materials Science › Biomaterials › Silk-based biomaterials and applications
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Keywords
- shape memory polymers, UV crosslinking, additive manufacturing, digital light processing, pneumatic extrusion, injectable scaffolds, bone regeneration, bone formation, biocompatibility, osteoconduction
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.