Methacrylated Silk Fibroin Additive Manufacturing of Shape Memory Constructs with Possible Application in Bone Regeneration
Open accessThe DOI matches its Crossref record; 51 of the 53 references it cites were found in a registry or an index.
Abstract
Methacrylated silk (Sil-MA) is a chemically modified silk fibroin specifically designed to be crosslinkable under UV light, which makes this material applicable in additive manufacturing techniques and allows the prototyping and development of patient-specific 2D or 3D constructs. In this study, we produced a thin grid structure based on crosslinked Sil-MA that can be withdrawn and ejected and that can recover its shape after rehydration. A complete chemical and physical characterization of Sil-MA was first conducted. Additionally, we tested Sil-MA biocompatibility according to the International Standard Organization protocols (ISO 10993) ensuring the possibility of using it in future trials. Sil-MA was also tested to verify its ability to support osteogenesis. Overall, Sil-MA was shown to be biocompatible and osteoconductive. Finally, two different additive manufacturing technologies, a Digital Light Processing (DLP) UV projector and a pneumatic extrusion technique, were used to develop a Sil-MA grid construct. A proof-of-concept of its shape-memory property was provided. Together, our data support the hypothesis that Sil-MA grid constructs can be injectable and applicable in bone regeneration applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures







Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“In particular, methacrylated silk fibroin (SFMA) has been used to enhance crosslinking density and modulate mechanical behavior in composite hydrogels [19,20,21].”
From Montmorillonite-reinforced methacrylated collagen/methacrylated silk fibroin hydrogel-based inks: rheological and physicochemical characterization for bone scaffold applications (2026) · cites this paper as [20]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The FTIR of pure GMA shows bands at 1265 cm⁻¹, corresponding to C-OH stretching of the alcohol formed after epoxide ring opening, and at 1165 and 951 cm⁻¹, representing CH₂ stretching and rocking vibrations of the methacrylate vinyl group (Figure 1D) [19,20].”
From Montmorillonite-reinforced methacrylated collagen/methacrylated silk fibroin hydrogel-based inks: rheological and physicochemical characterization for bone scaffold applications (2026) · cites this paper as [20]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The lower concentration of free primary amine groups observed for both SF and SilMA compared with collagen is consistent with the intrinsic amino acid composition of silk fibroin, which is predominantly composed of glycine, alanine, and serine, while containing relatively few lysine residues [20], [21].”
From Montmorillonite-reinforced methacrylated collagen/methacrylated silk fibroin hydrogel-based inks: rheological and physicochemical characterization for bone scaffold applications (2026) · cites this paper as [20]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Matrix elasticity directs stem cell lineage specification
Engler, A. J., Sen, S., Sweeney, H. L., & Discher, D. E. (2006) · Cell · doi:10.1016/j.cell.2006.06.044 · Cited by 13,915 · cited 1×
“In particular, Sil-MA gels were reported having compressive and elastic moduli increasing with Sil-MA concentration, achieving 130 kPA in compression and 15 kPa in tension for gels produced with a 30% Sil-MA solution [27]; these values are close to the elasticity modulus of the normal bone extracellular matrix (ECM),…”
BackgroundHydrogel: Preparation, characterization, and applications: A review
Ahmed, E. M. (2015) · Journal of Advanced Research · doi:10.1016/j.jare.2013.07.006 · Cited by 5,800
Biomedical applications of hydrogels: A review of patents and commercial products
Caló, E., & Khutoryanskiy, V. V. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2014.11.024 · Cited by 2,634
Vepari, C., & Kaplan, D. L. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.05.013 · Cited by 2,561 · cited 1×
“SF is biocompatible [14,15], bioresorbable [16,17], and, when used in the form of gel and film, it is transparent [18–20].”
BackgroundAlginate Hydrogels as Biomaterials
Augst, A. D., Kong, H. J., & Mooney, D. J. (2006) · Macromolecular Bioscience · doi:10.1002/mabi.200600069 · Cited by 1,839 · cited 1×
“, chitosan [6], keratin [7], alginate [8], agarose [9], cellulose [10]), silk”
BackgroundTranslational Applications of Hydrogels
Correa, S., Grosskopf, A. K., Lopez Hernandez, H., Chan, D., Yu, A. C., Stapleton, L. M., & Appel, E. A. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01177 · Cited by 1,143
Hydrogels for Biomedical Applications: Their Characteristics and the Mechanisms behind Them
Chai, Q., Jiao, Y., & Yu, X. (2017) · Gels · doi:10.3390/gels3010006 · Cited by 1,072
Precisely printable and biocompatible silk fibroin bioink for digital light processing 3D printing
Kim, S. H., Yeon, Y. K., Lee, J. M., Chao, J. R., Lee, Y. J., Seo, Y. B., Sultan, M. T., Lee, O. J., Lee, J. S., Yoon, S.-I., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-03759-y · Cited by 972
Biodegradation of Silk Biomaterials
Cao, Y., & Wang, B. (2009) · International Journal of Molecular Sciences · doi:10.3390/ijms10041514 · Cited by 713 · cited 1×
“SF is biocompatible [14,15], bioresorbable [16,17], and, when used in the form of gel and film, it is transparent [18–20].”
BackgroundBioactive hydrogels for bone regeneration
Bai, X., Gao, M., Syed, S., Zhuang, J., Xu, X., & Zhang, X.-Q. (2018) · Bioactive Materials · doi:10.1016/j.bioactmat.2018.05.006 · Cited by 556 · cited 1×
“Moreover, hydrogels are absorbable, and they have excellent integration with surrounding biological tissues, limiting the possibility of inflammatory or immune responses [5].”
BackgroundDigital light processing 3D printed silk fibroin hydrogel for cartilage tissue engineering
Hong, H., Seo, Y. B., Kim, D. Y., Lee, J. S., Lee, Y. J., Lee, H., Ajiteru, O., Sultan, M. T., Lee, O. J., Kim, S. H., et al. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2019.119679 · Cited by 473
Hengsberger, S., Kulik, A., & Zysset, P. (2002) · Bone · doi:10.1016/s8756-3282(01)00624-x · Cited by 363
Biocompatible Silk Printed Optical Waveguides
Parker, S. T., Domachuk, P., Amsden, J., Bressner, J., Lewis, J. A., Kaplan, D. L., & Omenetto, F. G. (2009) · Advanced Materials · doi:10.1002/adma.200801580 · Cited by 351
Biocompatibility evaluation of silk fibroin with peripheral nerve tissues and cells in vitro
Yang, Y., Chen, X., Ding, F., Zhang, P., Liu, J., & Gu, X. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2006.12.004 · Cited by 333 · cited 1×
“SF is biocompatible [14,15], bioresorbable [16,17], and, when used in the form of gel and film, it is transparent [18–20].”
Background3D bioprinted silk fibroin hydrogels for tissue engineering
Kim, S. H., Hong, H., Ajiteru, O., Sultan, M. T., Lee, Y. J., Lee, J. S., Lee, O. J., Lee, H., Park, H. S., Choi, K. Y., et al. (2021) · Nature Protocols · doi:10.1038/s41596-021-00622-1 · Cited by 294 · cited 1×
“This makes the overall technique able to develop patient-specific devices, based on patient X-rays and magnetic resonance imaging, as widely discussed in the literature [32,33].”
Injectable scaffolds: Preparation and application in dental and craniofacial regeneration
Chang, B., Ahuja, N., Ma, C., & Liu, X. (2017) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2016.11.001 · Cited by 250
Hydrogels for Biomedical Applications: Cellulose, Chitosan, and Protein/Peptide Derivatives
Del Valle, L., Díaz, A., & Puiggalí, J. (2017) · Gels · doi:10.3390/gels3030027 · Cited by 239
The chitosan hydrogels: from structure to function
Fu, J., Yang, F., & Guo, Z. (2018) · New Journal of Chemistry · doi:10.1039/c8nj03482f · Cited by 232 · cited 1×
“, chitosan [6], keratin [7], alginate [8], agarose [9], cellulose [10]), silk”
BackgroundLi, W., Mille, L. S., Robledo, J. A., Uribe, T., Huerta, V., & Zhang, Y. S. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.202000156 · Cited by 213 · cited 1×
“Sil-MA (methacrylated silk) is a chemically modified SF initially designed as ink for 3D fabrication, to be used in digital light processing (DLP) and stereolithography (SLA) 3D printing [27,28].”
Agarose-Based Hydrogels as Suitable Bioprinting Materials for Tissue Engineering
López-Marcial, G. R., Zeng, A. Y., Osuna, C., Dennis, J., García, J. M., & O’Connell, G. D. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00903 · Cited by 196 · cited 1×
“, chitosan [6], keratin [7], alginate [8], agarose [9], cellulose [10]), silk”
BackgroundPhotocrosslinking of Silk Fibroin Using Riboflavin for Ocular Prostheses
Applegate, M. B., Partlow, B. P., Coburn, J., Marelli, B., Pirie, C., Pineda, R., Kaplan, D. L., & Omenetto, F. G. (2016) · Advanced Materials · doi:10.1002/adma.201504527 · Cited by 179 · cited 1×
“The first consists of promoting the formation of dityrosine and trityrosine crosslinking by the use of different agents with or without an external stimulus (ruthenium and ammonium persulfate and UV irradiation [22], riboflavin and UVA irradiation [23], hydrogen peroxide and horseradish peroxidase [24], genipin in pre…”
BackgroundAdvances in Engineering Human Tissue Models
Moysidou, C.-M., Barberio, C., & Owens, R. M. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.620962 · Cited by 179
Precise Patterning of Silk Microstructures Using Photolithography
Kurland, N. E., Dey, T., Kundu, S. C., & Yadavalli, V. K. (2013) · Advanced Materials · doi:10.1002/adma.201302823 · Cited by 134
Bucciarelli, A., & Motta, A. (2022) · Biomaterials Advances · doi:10.1016/j.bioadv.2022.212982 · Cited by 128 · cited 1×
“Instead, in the chemical crosslinking, the stability is ensured by the formation of covalent bonding and, consequently, a three-dimensional (3D) continuous network [21].”
BackgroundSelf-citationZhang, K., Qian, Y., Wang, H., Fan, L., Huang, C., Yin, A., & Mo, X. (2010) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32895 · Cited by 116 · cited 1×
“The first consists of promoting the formation of dityrosine and trityrosine crosslinking by the use of different agents with or without an external stimulus (ruthenium and ammonium persulfate and UV irradiation [22], riboflavin and UVA irradiation [23], hydrogen peroxide and horseradish peroxidase [24], genipin in pre…”
BackgroundFacile and rapid ruthenium mediated photo-crosslinking of Bombyx mori silk fibroin
Whittaker, J. L., Choudhury, N. R., Dutta, N. K., & Zannettino, A. (2014) · J. Mater. Chem. B · doi:10.1039/c4tb00698d · Cited by 114 · cited 1×
“The first consists of promoting the formation of dityrosine and trityrosine crosslinking by the use of different agents with or without an external stimulus (ruthenium and ammonium persulfate and UV irradiation [22], riboflavin and UVA irradiation [23], hydrogen peroxide and horseradish peroxidase [24], genipin in pre…”
BackgroundWu, X., Zhou, M., Jiang, F., Yin, S., Lin, S., Yang, G., Lu, Y., Zhang, W., & Jiang, X. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.04.005 · Cited by 113
Fast Setting Silk Fibroin Bioink for Bioprinting of Patient‐Specific Memory‐Shape Implants
Costa, J. B., Silva‐Correia, J., Oliveira, J. M., & Reis, R. L. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201701021 · Cited by 105 · cited 1×
“enzymatic cross-link of rSF with horseradish peroxidase [47], but in this case, the produced structure was not injectable.”
BackgroundGupta, P., Lorentz, K. L., Haskett, D. G., Cunnane, E. M., Ramaswamy, A. K., Weinbaum, J. S., Vorp, D. A., & Mandal, B. B. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.01.020 · Cited by 104 · cited 1×
“SF is biocompatible [14,15], bioresorbable [16,17], and, when used in the form of gel and film, it is transparent [18–20].”
BackgroundRapidly photocurable silk fibroin sealant for clinical applications
Kim, S. H., Lee, Y. J., Chao, J. R., Kim, D. Y., Sultan, M. T., Lee, H. J., Lee, J. M., Lee, J. S., Lee, O. J., Hong, H., et al. (2020) · NPG Asia Materials · doi:10.1038/s41427-020-0227-6 · Cited by 77 · cited 3×
“The proposed strategy is crosslinking after injection to form the gel in-situ, allowing its stabilization in the injection site [38,39].”
MethodWang, J., Li, X., Song, Y., Su, Q., Xiaohalati, X., Yang, W., Xu, L., Cai, B., Wang, G., Wang, Z., et al. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.12.017 · Cited by 73 · cited 1×
“An injectable, photoluminescent, carbon-nanotubes-doped sericin scaffold (CNTs-SS) with a programmable shape-memory property was developed for stroke applications, showing how this type of scaffolds can be readily compressed into small volumetric mass (roughly 90%) and conveniently injected into stroke cavities, follo…”
BackgroundBucciarelli, A., Greco, G. H., Corridori, I., Pugno, N. M., & Motta, A. (2021) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.0c01657 · Cited by 72 · cited 2×
“SF is the internal protein of silk fiber and is extracted from it as an aqueous solution (regenerated silk fibroin, rSF) by chemical processing [12,13] which contributes also to the removal of the immunogenic sericin.”
BackgroundMethodSelf-citationBucciarelli, A., Mulloni, V., Maniglio, D., Pal, R. K., Yadavalli, V. K., Motta, A., & Quaranta, A. (2018) · Optical Materials · doi:10.1016/j.optmat.2018.02.058 · Cited by 71
Self-citationThe optical properties of regenerated silk fibroin films obtained from different sources
Perotto, G., Zhang, Y., Naskar, D., Patel, N., Kaplan, D. L., Kundu, S. C., & Omenetto, F. G. (2017) · Applied Physics Letters · doi:10.1063/1.4998950 · Cited by 70
Bucciarelli, A., Muthukumar, T., Kim, J. S., Kim, W. K., Quaranta, A., Maniglio, D., Khang, G., & Motta, A. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b00814 · Cited by 70 · cited 6×
“This signal was integrated after normalization with respect to the signal at 1 ppm to calculate the degree of GMA substitution, which resulted in DS (%) = 33% in accordance with the TNBS assay and previously published results [27,34].”
BackgroundResultInfluentialSelf-citationPivar, M., Gregor‐Svetec, D., & Muck, D. (2021) · Polymers · doi:10.3390/polym14010117 · Cited by 66 · cited 3×
“When pneumatic extrusion was used, an increase in the dimension occurred in the Sil-MA structures and should be attributed to the flow stresses relaxation, a phenomenon widely discussed in the literature [40,41].”
BackgroundMethodLiu, W., Zhou, Z., Zhang, S., Shi, Z., Tabarini, J., Lee, W., Zhang, Y., Corder, S. N. G., Li, X., Dong, F., et al. (2017) · Advanced Science · doi:10.1002/advs.201700191 · Cited by 62
Zhou, L., Wang, Z., Chen, D., Lin, J., Li, W., Guo, S., Wu, R., Zhao, X., Lin, T., Chen, G., et al. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.110670 · Cited by 62 · cited 5×
“The use of Sil-MA as an injectable hydrogel has been only recently introduced in the case of spinal cord injury [39].”
BackgroundMethodInfluentialHong, H., Lee, O. J., Lee, Y. J., Lee, J. S., Ajiteru, O., Lee, H., Suh, Y. J., Sultan, M. T., Kim, S. H., & Park, C. H. (2020) · Biomolecules · doi:10.3390/biom11010035 · Cited by 57 · cited 1×
“Previous authors showed that the ideal dialysis period for the modification of SF and GMA is seven days to preserve a good cell proliferation rate [44].”
BackgroundMolecularly Imprinted Silk Fibroin Nanoparticles
Bossi, A., Bucciarelli, A., & Maniglio, D. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c05405 · Cited by 52 · cited 1×
“Since its development in 2018, Sil-MA has been widely used as a base material for different architectures, including, but not limited to, bone and cartilage scaffolds [32–36], nanoparticles for molecular recognition [37], and sealant for orthodontic applications [38].”
MethodSelf-citationSize and print path effects on mechanical properties of material extrusion 3D printed plastics
Ai, J.-R., & Vogt, B. D. (2022) · Progress in Additive Manufacturing · doi:10.1007/s40964-022-00275-w · Cited by 43 · cited 3×
“When pneumatic extrusion was used, an increase in the dimension occurred in the Sil-MA structures and should be attributed to the flow stresses relaxation, a phenomenon widely discussed in the literature [40,41].”
BackgroundMethodMao, Z., Bi, X., Wu, C., Zheng, Y., Shu, X., Wu, S., Guan, J., & Ritchie, R. O. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202201588 · Cited by 43
Fabrication of Nanoscale Patternable Films of Silk Fibroin Using Benign Solvents
Bucciarelli, A., Pal, R. K., Maniglio, D., Quaranta, A., Mulloni, V., Motta, A., & Yadavalli, V. K. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201700110 · Cited by 42
Self-citationBucciarelli, A., Chiera, S., Quaranta, A., Yadavalli, V. K., Motta, A., & Maniglio, D. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201901134 · Cited by 42 · cited 2×
“fibroin (SF) is interesting because of its high mechanical strength, which makes it a good candidate in the case of structural requirements [11].”
BackgroundSelf-citationZhou, B., Wang, P., Cui, L., Yu, Y., Deng, C., Wang, Q., & Fan, X. (2017) · Applied Biochemistry and Biotechnology · doi:10.1007/s12010-017-2417-4 · Cited by 39 · cited 1×
“The first consists of promoting the formation of dityrosine and trityrosine crosslinking by the use of different agents with or without an external stimulus (ruthenium and ammonium persulfate and UV irradiation [22], riboflavin and UVA irradiation [23], hydrogen peroxide and horseradish peroxidase [24], genipin in pre…”
BackgroundProcessing keratin from camel hair and cashmere with ionic liquids
Yang, Y. J., Ganbat, D., Aramwit, P., Bucciarelli, A., Chen, J., Migliaresi, C., & Motta, A. (2018) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2019.10 · Cited by 38 · cited 1×
“, chitosan [6], keratin [7], alginate [8], agarose [9], cellulose [10]), silk”
BackgroundSelf-citationLi, S., Huang, C., Liu, H., Han, X., Wang, Z., Huang, J. S., Yan, Y., & Wang, Z. (2022) · ACS Applied Polymer Materials · doi:10.1021/acsapm.2c00952 · Cited by 36 · cited 1×
“In fact, GelMA has been recently printed with a resolution of 200 μm by a DLP printer with a maximum resolution of 50 μm [46].”
MethodRaggio, R., Bonani, W., Callone, E., Dirè, S., Gambari, L., Grassi, F., & Motta, A. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00212 · Cited by 35 · cited 2×
“ductive properties similar to those of SF sponges in our previous study [45].”
ResultSelf-citationBucciarelli, A., Janigro, V., Yang, Y., Fredi, G., Pegoretti, A., Motta, A., & Maniglio, D. (2021) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2021.100605 · Cited by 25
Self-citationMilcovich, G., Antunes, F. E., Farra, R., Grassi, G., Grassi, M., & Asaro, F. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.04.079 · Cited by 23 · cited 1×
“, chitosan [6], keratin [7], alginate [8], agarose [9], cellulose [10]), silk”
BackgroundBucciarelli, A., Greco, G. H., Corridori, I., Motta, A., & Pugno, N. M. (2021) · Data in Brief · doi:10.1016/j.dib.2021.107294 · Cited by 18 · cited 1×
“SF is the internal protein of silk fiber and is extracted from it as an aqueous solution (regenerated silk fibroin, rSF) by chemical processing [12,13] which contributes also to the removal of the immunogenic sericin.”
BackgroundSelf-citation
Cited by
Alparslan, C., & Bayraktar, Ş. (2025) · Polymers · doi:10.3390/polym17091287 · Cited by 83
“In the future, it is recommended to verify the effectiveness of these structures in bone regeneration using in vivo tests [86].”
Silk fibroin-based inks for in situ 3D printing using a double crosslinking process
Agostinacchio, F., Fitzpatrick, V., Dirè, S., Kaplan, D. L., & Motta, A. (2024) · Bioactive Materials · doi:10.1016/j.bioactmat.2024.01.015 · Cited by 58
Applications of silk-based biomaterials in biomedicine and biotechnology
Babu, P. J., & Suamte, L. (2023) · Engineered Regeneration · doi:10.1016/j.engreg.2023.11.002 · Cited by 56
4D printing for bone implant: Progress, advantages and challenges
Yang, F. Y., Ding, W., Jia, J., Shuai, C., & Feng, P. (2025) · Progress in Materials Science · doi:10.1016/j.pmatsci.2025.101591 · Cited by 50
4D Printed Protein‐AuNR Nanocomposites with Photothermal Shape Recovery
Yu, S., Sadaba, N., Sanchez‐Rexach, E., Hilburg, S. L., Pozzo, L. D., Altın, G., Liz‐Marzán, L. M., de Aberasturi, D. J., Sardón, H., & Nelson, A. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202311209 · Cited by 43
Metadata
- Authors
- Bucciarelli, A., Petretta, M., Grigolo, B., Gambari, L., Bossi, A. M., Grassi, F., & Maniglio, D.
- Affiliations
- Istituto Ortopedico Rizzoli (IT)
- University of Verona (IT)
- University of Trento (IT)
- Corresponding author
- Bucciarelli, Alessio
- Maniglio, Devid
- ORCID
- Venue
- Gels
- Publisher
- MDPI AG
- Published
- 2022-12-16
- Volume
- 8
- Issue
- 12
- Pages
- 833
- ISSN
- 2310-2861 (ISSN-L)
- PMC
- PMC9777907
- OpenAlex
- W4312129977
- Cited by
- 31
- References
- 53
- Citations by year
- 2026: 10 · 2025: 9 · 2024: 7 · 2023: 5
- FWCI
- 1.23
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Gels (publishedVersion, cc-by)
- Preprints.org (acceptedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- Institutional Research Information System (Università degli Studi di Trento) (submittedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Istituto Ortopedico Rizzoli di Bologna
- Topics
- Physical Sciences › Materials Science › Biomaterials › Silk-based biomaterials and applications
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Keywords
- shape memory polymers, UV crosslinking, additive manufacturing, digital light processing, pneumatic extrusion, injectable scaffolds, bone regeneration, bone formation, biocompatibility, osteoconduction
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.