Characterization of Fe(III) Adsorption onto Zeolite and Bentonite
Open accessThe DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
Abstract
In this study, the adsorption of Fe(III) from aqueous solution on zeolite and bentonite was investigated by combining batch adsorption technique, Atomic adsorption spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy analyses. Although iron is commonly found in water and is an essential bioelement, many industrial processes require efficient removal of iron from water. Two types of zeolite and two types of bentonite were used. The results showed that the maximum adsorption capacities for removal of Fe (III) by Zeolite Micro 20, Zeolite Micro 50, blue bentonite, and brown bentonite were 10.19, 9.73, 11.64, and 16.65 mg.g−1, respectively. Based on the X-ray photoelectron spectroscopy (XPS) and X-ray fluorescence (XRF) analyses of the raw samples and the solid residues after sorption at low and high initial Fe concentrations, the Fe content is different in the surface layer and in the bulk of the material. In the case of lower initial Fe concentration (200 mg.dm−3), more than 95% of Fe is adsorbed in the surface layer. In the case of higher initial Fe concentration (4000 mg.dm−3), only about 45% and 61% of Fe is adsorbent in the surface layer of zeolite and bentonite, respectively; the rest is adsorbed in deeper layers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures



Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The open network of negatively charged silanol groups on the fiber surface presents spaces large enough to accommodate adsorbed metal cations.”
From Asbestos and Iron (2023) · cites this paper as [30]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“While a hydroxylated surface complexes numerous different cations, a preference for iron is frequently demonstrated [29,30,31,32].”
From Asbestos and Iron (2023) · cites this paper as [30]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
THE CONSTITUTION AND FUNDAMENTAL PROPERTIES OF SOLIDS AND LIQUIDS. PART I. SOLIDS.
Langmuir, I. (1916) · Journal of the American Chemical Society · doi:10.1021/ja02268a002 · Cited by 9,997
Development of a DTPA Soil Test for Zinc, Iron, Manganese, and Copper
Lindsay, W. L., & Norvell, W. A. (1978) · Soil Science Society of America Journal · doi:10.2136/sssaj1978.03615995004200030009x · Cited by 9,983 · cited 1×
“Though the desorption process of Fe(III) from zeolites and bentonites was not part of this study, it could be realized with diethylenetriaminepentaacetic acid [39], 0.”
BackgroundÜber die adsorption in lösungen
Freundlich, H. (1907) · Zeitschrift für Physikalische Chemie · doi:10.1515/zpch-1907-5723 · Cited by 9,001
Modelling and interpretation of adsorption isotherms
Ayawei, N., Ebelegi, A. N., & Wankasi, D. (2017) · Journal of Chemistry · doi:10.1155/2017/3039817 · Cited by 2,957 · cited 1×
“The most accurate fit is by Redlich-Peterson isotherm for adsorption onto Z-M20 and B-BR, which combines elements from both Langmuir and Freundlich equations; therefore, the mechanism of adsorption is a mix and does not follow ideal monolayer adsorption and is applicable in either homogenous or heterogeneous systems b…”
BackgroundRedlich, O., & Peterson, D. L. (1959) · The Journal of Physical Chemistry · doi:10.1021/j150576a611 · Cited by 2,607
Günay, A., Arslankaya, E., & Tosun, İ. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.12.034 · Cited by 1,122 · cited 1×
“mg−1) is adsorption energy; the isotherm represents sorption taking place on a homogenous surface within the adsorbent [25],”
BackgroundHüfner, S. (2003) · Advanced Texts in Physics · doi:10.1007/978-3-662-09280-4 · Cited by 900
Heavy metal adsorption with zeolites: The role of hierarchical pore architecture
Hong, M., Yu, L., Wang, Y., Zhang, J., Chen, Z., Dong, L., Zan, Q., & Li, R. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.11.087 · Cited by 452 · cited 1×
“Zeolites and bentonites are adsorbents with a high uptake of Fe(III) due to high ion exchange capacity, high affinity to metal cations, and stability under different physical and chemical conditions [6,7].”
BackgroundRemoval of heavy metals from aqueous solution using chitosan-combined magnetic biochars
Xiao, F., Cheng, J., Cao, W., Yang, C., Chen, J., & Luo, Z. (2019) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2019.01.068 · Cited by 297 · cited 1×
“Carbon is often used for removal of iron whether in form of activated carbon [3], graphene oxide [4] or biochar [5].”
BackgroundRemoval of Mn2+ from aqueous solution by manganese oxide coated zeolite
Taffarel, S. R., & Rubio, J. (2010) · Minerals Engineering · doi:10.1016/j.mineng.2010.07.007 · Cited by 223 · cited 1×
“After stirring for 1 h, the suspension is filtered, washed several times using distilled water, and dried in an oven at 100 ◦C [35].”
MethodOn the removal of Mn2+ ions by adsorption onto natural and activated Chilean zeolites
Taffarel, S. R., & Rubio, J. (2009) · Minerals Engineering · doi:10.1016/j.mineng.2008.09.007 · Cited by 218 · cited 1×
“The resulting suspension is dried in oven at 100 ◦C [33].”
BackgroundRemoval mechanisms of aqueous Cr(VI) using apple wood biochar: a spectroscopic study
Liu, N., Zhang, Y., Xu, C., Liu, P., Lv, J., Liu, Y., & Wang, Q. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.121371 · Cited by 218 · cited 2×
“Ion exchange between Cr(III) and K+, Ca2+ and Na+ in the aqueous solution after Cr(VI) removal from aqueous solution using apple wood biochar was reported [17].”
BackgroundAlbadarin, A. B., Al-Muhtaseb, A. H., Al-laqtah, N. A., Walker, G. M., Allen, S. J., & Ahmad, M. N. M. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.02.044 · Cited by 202 · cited 2×
“g−1) is adsorption capacity, n (1) is a constant related to the intensity of the adsorption; the isotherm represents sorption taking place on a heterogeneous surface with interaction between the adsorbed molecules [23];”
BackgroundMethodCamacho, L. M., Parra, R., & Deng, S. (2011) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2011.02.035 · Cited by 165 · cited 1×
“Afterwards, the modified adsorbent is heated at 500 ◦C for 3 h, cooled at room temperature, and washed several times with distilled water [36].”
MethodBhattacharyya, K. G., & Gupta, S. S. (2006) · Adsorption · doi:10.1007/s10450-006-0145-0 · Cited by 146 · cited 1×
“Another study of Fe(III) adsorption [9]”
Removal of arsenic from water using Fe-exchanged natural zeolite
Li, Z., Jean, J., Jiang, W., Chang, P.-H., Chen, C., & Liao, L. (2011) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2011.01.030 · Cited by 130 · cited 1×
“The mixture is allowed to settle, and the supernatant removed, followed by washing the adsorbent with de-ionized water [37].”
BackgroundEffect of PHOSPHATE inhibitors on lead release from pipes
Edwards, M. A., & McNeill, L. S. (2002) · American Water Works Association · doi:10.1002/j.1551-8833.2002.tb09383.x · Cited by 120 · cited 1×
“Its removal has been widely studied due to precipitation in water distribution systems [1,2].”
BackgroundZhang, S., Liu, C., Yuan, Y., Fan, M., Zhang, D., Wang, D., & Xu, Y. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123520 · Cited by 98 · cited 2×
“Though the desorption process of Fe(III) from zeolites and bentonites was not part of this study, it could be realized with diethylenetriaminepentaacetic acid [39], 0.5 mol.l−1 HNO3 [40], Na2-EDTA [41], HCl and EDTA [42], thermally [43] etc.”
InfluentialJiménez-Cedillo, M. J., Olguín, M. T., & Fall, C. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.07.049 · Cited by 87 · cited 1×
“The procedure mentioned before is applied in a similar manner using MnCl2 and a mixture of FeCl3 and MnCl2 solutions [38].”
MethodRemoval of Fe(III) ion from aqueous solution by adsorption on raw and treated clinoptilolite samples
Öztaş, N. A., Karabakan, A., & Topal, Ö. (2008) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2007.07.030 · Cited by 74 · cited 1×
“A study [8] of Fe(III) removal by zeolite in its raw form and treated with Na2S2O8 and HNO3 at 20 ◦C and 70 ◦C reported a maximum sorption capacity of about 100 mg.”
BackgroundKwakye-Awuah, B., Sefa-Ntiri, B., Von-Kiti, E., Nkrumah, I., & Williams, C. D. (2019) · Water · doi:10.3390/w11091912 · Cited by 68
Wu, K., Liu, R., Li, T., Liu, H., Peng, J., & Qu, J. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.04.076 · Cited by 66 · cited 1×
“g−1 stating that the oxidation state of As(III) has not changed with the occurrence of the ion exchange between sulfate and arsenite [18].”
BackgroundSorption Capacities of Natural and Synthetic Zeolites for Cu(II) Ions
Kyzioł-Komosińska, J., Rosik‐Dulewska, C., Franus, M., Antoszczyszyn-Szpicka, P., Czupioł, J., & Krzyżewska, I. (2015) · Polish Journal of Environmental Studies · doi:10.15244/pjoes/30923 · Cited by 63
Kang, Y.-G., Vu, H. C., Chang, Y., & Chang, Y.-S. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124012 · Cited by 57 · cited 1×
“Carbon is often used for removal of iron whether in form of activated carbon [3], graphene oxide [4] or biochar [5].”
BackgroundDas, S., & Mishra, S. (2020) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2020.122751 · Cited by 56 · cited 1×
“Carbon is often used for removal of iron whether in form of activated carbon [3], graphene oxide [4] or biochar [5].”
BackgroundZhang, Z., He, S., Zhang, Y., Zhang, K., Wang, J., Jing, R., Yang, X., Hu, Z., Lin, X., & Li, Y. (2019) · Environmental Pollution · doi:10.1016/j.envpol.2019.07.106 · Cited by 53 · cited 1×
“Zeolites and bentonites are adsorbents with a high uptake of Fe(III) due to high ion exchange capacity, high affinity to metal cations, and stability under different physical and chemical conditions [6,7].”
BackgroundZeolite-mediated removal of NOx by NH3 from exhaust streams at low temperatures
Richter, M., Berndt, H., Eckelt, R., Schneider, M. F., & Fricke, R. (1999) · Catalysis Today · doi:10.1016/s0920-5861(99)00215-1 · Cited by 46 · cited 1×
“Manganese oxide coated zeolite and bentonite are prepared utilizing a reductive procedure [34] modified to precipitate colloids of manganese oxides onto zeolite and bentonite surfaces.”
MethodZhou, X., Liu, W., Tian, C., Mo, S., Liu, X., Deng, H., & Lin, Z. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.06.142 · Cited by 40 · cited 1×
“g−1 was studied and the adsorption mechanism was proposed as the coordination of Eu(III) with the abundant catechol and amine/imine groups on the polydopamine coating [21].”
BackgroundEffective use of elderberry (Sambucus nigra) pomace in biosorption processes of Fe(III) ions
Kalak, T., Dudczak-Hałabuda, J., Tachibana, Y., & Cierpiszewski, R. (2020) · Chemosphere · doi:10.1016/j.chemosphere.2019.125744 · Cited by 40 · cited 1×
“4 [13] Chitosan/Fe3O4/graphene oxide nanocomposite 6.”
XPS and XRF depth patina profiles of ancient silver coins
Caridi, F., Torrisi, L., Cutroneo, M., Barreca, F., Gentile, C., Serafino, T., & Castrizio, D. (2012) · Applied Surface Science · doi:10.1016/j.apsusc.2012.02.071 · Cited by 39
Xiao, W., Pan, C. A. O., LIANG, Q.-N., Huang, X., Kai-yun, L. I., Zhang, Y., Qin, W., Qiu, G., & Wang, J. (2018) · Transactions of Nonferrous Metals Society of China · doi:10.1016/s1003-6326(18)64668-0 · Cited by 38 · cited 1×
“The situation is similar to Bi(III) ion-exchange for Ca2+, Mg2+ and Fe2+, the impurity atoms on rutile surface, dissolved in acidic solution [32].”
BackgroundKinetics and equilibrium adsorption study of selenium oxyanions onto Al/Si and Fe/Si coprecipitates
Chan, Y. T., Liu, Y., Tzou, Y.-M., Kuan, W., Chang, R. R., & Wang, M. K. (2018) · Chemosphere · doi:10.1016/j.chemosphere.2018.01.110 · Cited by 30 · cited 1×
“The influence of temperature on the sorption capacity is also significant as the maximum sorption capacity increases with increasing temperature [10] and this influence also depends on the nature of the process if it is endothermic or exothermic [11].”
BackgroundAdsorption of Aqueous As (III) in Presence of Coexisting Ions by a Green Fe-Modified W Zeolite
Ramírez, A. M., Gamero-Melo, P., Ruiz-Camacho, B., Minchaca-Mojica, J. I., Romero-Toledo, R., & Gamero-Vega, K. Y. (2019) · Water · doi:10.3390/w11020281 · Cited by 29 · cited 1×
“g−1 and the adsorption took place by chemical bonding [19].”
BackgroundVariations regularity of microorganisms and corrosion of cast iron in water distribution system
Qiu, W., Li, W., He, J., Zhao, H., Liu, X., & Yuan, Y. (2018) · Journal of Environmental Sciences · doi:10.1016/j.jes.2018.03.004 · Cited by 20 · cited 1×
“Its removal has been widely studied due to precipitation in water distribution systems [1,2].”
BackgroundThe kinetic and thermodynamic adsorption of Eu(III) on synthetic maghemite
Xu, B., Zhu, Y., Liu, H., Jin, Z., & Chen, T. (2016) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2016.05.055 · Cited by 18 · cited 1×
“g−1 and for the adsorption the oxygen-containing functional groups were responsible [20].”
BackgroundLe, T. D., Tran, H. V., Thu, L. D., Quang, T. N., Hằng, N. T., & Khoi, N. D. (2018) · Vietnam Journal of Science and Technology/Science and Technology · doi:10.15625/2525-2518/56/2/10620 · Cited by 7
Ostovan, A., & Elhami, S. (2018) · Journal of Water and Wastewater; Ab va Fazilab ( in persian ) · doi:10.22093/wwj.2017.62973.2253 · Cited by 6
Harrison, K., Prince, R. H., & Lambert, R. M. (1988) · Surface Science · doi:10.1016/0039-6028(88)90493-1 · Cited by 4 · cited 1×
“l−1 HNO3 [40], Na2-EDTA [41], HCl and EDTA [42], thermally [43] etc.”
Potency of Chitin as an Adsorbent in Black Water Treatment Process at Peatland Environment
Syahmani, S., Leny, M., Iriani, R., & Sanjaya, R. E. (2018) · International Conference on Social Sciences Education (ICSSE) · doi:10.2991/icsse-17.2018.70 · Cited by 4 · cited 4×
“Though the desorption process of Fe(III) from zeolites and bentonites was not part of this study, it could be realized with diethylenetriaminepentaacetic acid [39], 0.5 mol.l−1 HNO3 [40], Na2-EDTA [41], HCl and EDTA [42], thermally [43] etc.”
InfluentialDesorption of Absorbed Iron in Bean Root and Leaf Tissues
Jooste, J. H., & de Bruyn, J. A. (1979) · Journal of South African Botany · doi:10.5962/p.396905 · Cited by 1 · cited 2×
“Though the desorption process of Fe(III) from zeolites and bentonites was not part of this study, it could be realized with diethylenetriaminepentaacetic acid [39], 0.5 mol.l−1 HNO3 [40], Na2-EDTA [41], HCl and EDTA [42], thermally [43] etc.”
Influential
Research works printed but not linked: 1
- Ehssan M.N. Utilization of bentonite as an adsprpent material in the removal of iron (III) Int. J. Eng. Sci. Technol. 2012 4 4480
Cited by
Szerement, J., Szatanik-Kloc, A., Jarosz, R., Bajda, T., & Mierzwa-Hersztek, M. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.127461 · Cited by 167
Mubarak, M. F., Mohamed, A. M. G., Keshawy, M. E., El-Moghny, T. A., & Shehata, N. (2021) · Alexandria Engineering Journal · doi:10.1016/j.aej.2021.09.041 · Cited by 120
Dim, P. E., Mustapha, L. S., Termtanun, M., & Okafor, J. O. (2021) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2021.103064 · Cited by 103
Removal of Nickel from Aqueous Solutions by Natural Bentonites from Slovakia
Šuránek, M., Melichová, Z., Kureková, V., Kljajević, L. M., & Nenadović, S. (2021) · Materials · doi:10.3390/ma14020282 · Cited by 30
“Bentonite is used for adsorption of Li [19], Cs [20], Fe(III) [21], Cd(II), Zn(II) [22], Cu(II), Pb(II), and Ni(II) [23].”
BackgroundAltunkaynak, Y., Canpolat, M., & Aslan, M. (2023) · Ionics · doi:10.1007/s11581-023-05157-x · Cited by 28
“To eliminate heavy metals and inorganic contaminants, clay minerals and agricultural wastes are utilized [28].”
Background
Metadata
- Authors
- Bakalár, T., Kaňuchová, M., Girová, A., Pavolová, H., Hromada, R., & Hajduová, Z.
- Affiliations
- Technical University of Košice (SK)
- University of Veterinary Medicine in Košice (SK)
- Bratislava University of Economics and Business (SK)
- Corresponding author
- Hajduová, Zuzana
- Venue
- International Journal of Environmental Research and Public Health
- Publisher
- MDPI AG
- Published
- 2020-08-07
- Volume
- 17
- Issue
- 16
- Pages
- 5718
- ISSN
- 1660-4601 (ISSN-L)
- PMC
- PMC7460527
- OpenAlex
- W3048005315
- Cited by
- 32
- References
- 40
- Citations by year
- 2026: 3 · 2025: 5 · 2024: 4 · 2023: 7 · 2022: 4 · 2021: 9
- FWCI
- 1.53
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- International Journal of Environmental Research and Public Health (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- Funders
- Kultúrna a Edukačná Grantová Agentúra MŠVVaŠ SR (1/0472/18)
- Topics
- Physical Sciences › Environmental Science › Water Science and Technology › Adsorption and biosorption for pollutant removal
- Physical Sciences › Environmental Science › Environmental Engineering › Environmental remediation with nanomaterials
- Physical Sciences › Environmental Science › Water Science and Technology › Coagulation and Flocculation Studies
- Keywords
- Fe(III) adsorption, zeolites, bentonite, iron removal from water, adsorption capacity, iron speciation, low-cost adsorbent
- MeSH terms
- Adsorption, Bentonite, Ferric Compounds, Hydrogen-Ion Concentration, Iron, Kinetics, Water Pollutants, Chemical, Zeolites, Water Purification
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.