Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 53 of the 53 references it cites were found in a registry or an index.

Microbial Degradation of Plastic in Aqueous Solutions Demonstrated by CO2 Evolution and Quantification

Open access

Published version of a preprint

Abstract

The environmental accumulation of plastics worldwide is a consequence of the durability of the material. Alternative polymers, marketed as biodegradable, present a potential solution to mitigate their ecological damage. However, understanding of biodegradability has been hindered by a lack of reproducible testing methods. We developed a novel method to evaluate the biodegradability of plastic samples based on the monitoring of bacterial respiration in aqueous media via the quantification of CO2 produced, where the only carbon source available is from the polymer. Rhodococcus rhodochrous and Alcanivorax borkumensis were used as model organisms for soil and marine systems, respectively. Our results demonstrate that this approach is reproducible and can be used with a variety of plastics, allowing comparison of the relative biodegradability of the different materials. In the case of low-density polyethylene, the study demonstrated a clear correlation between the molecular weight of the sample and CO2 released, taken as a measure of biodegradability.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/ijms21041176

Cites

53 of 53 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Microbial growth and measurement of biological degradation of polymer films. (a) Rhodococcus rhodochrous grown on low-density polyethylene (LDPE) underwent water washes and acid washing prior to visualisation by SEM (scale bar 1 µm). Large deposits of dead cells were clearly still visible after this treatment, revealing the challenges in the removal of bacterial films. (b) R. rhodochrous grown on 13C-glucose. There was no difference between measurement of CO2 (dark grey) or 13CO2 (light grey) after 196 h (n = 3, p = 0.98), directly linking carbon uptake with respiration. (c) Measurement of CO2 production by R. rhodochrous in minimal media (open diamond) on unaged LDPE (red circle) or unaged oxo-LDPE (blue square) revealed no significant effect due to the presence or type of plastic (n = 5, p = 0.99).
Figure 1 Microbial growth and measurement of biological degradation of polymer films. (a) Rhodococcus rhodochrous grown on low-density polyethylene (LDPE) underwent water washes and acid washing prior to visualisation by SEM (scale bar 1 µm). Large deposits of dead cells were clearly still visible after this treatment, revealing the challenges in the removal of bacterial films. (b) R. rhodochrous grown on 13C-glucose. There was no difference between measurement of CO2 (dark grey) or 13CO2 (light grey) after 196 h (n = 3, p = 0.98), directly linking carbon uptake with respiration. (c) Measurement of CO2 production by R. rhodochrous in minimal media (open diamond) on unaged LDPE (red circle) or unaged oxo-LDPE (blue square) revealed no significant effect due to the presence or type of plastic (n = 5, p = 0.99).CC BY · PubMed Central
Figure 2 Artificial UV aging accelerated the rate of biodegradation of oxo-LDPE compared with LDPE as a result of changes in molecular weight. (a) CO2 production from R. rhodochrous (n = 5) grown with no supplied carbon (open black diamond) on unaged LDPE (open red circle) and unaged oxo-LDPE (open blue square) compared to 450 h UV-irradiated plastic of both LDPE (solid red circles) or oxo-LDPE (solid blue squares). UV exposure of oxo-LDPE significantly affected CO2 production (p < 0.001), while there was only a small increasing trend in CO2 production between UV-treated LDPE and unaged plastics (p = 0.26). (b) The molecular weight (kDa) of LDPE (red open circles) and oxo-LDPE (blue solid squares), as measured by gel permeation chromatography, compared to UV exposure time (n = 3). (c) The concentration of CO2 measured at 35 days for R. rhodochrous grown on LDPE (red) or oxo-LDPE (blue) after UV irradiation (n = 5, error bars represent standard error) compared to the molecular weight of the sample revealed a clear link between molecular weight and CO2 production. The length of UV irradiation exposure is cited alongside each data point.
Figure 2 Artificial UV aging accelerated the rate of biodegradation of oxo-LDPE compared with LDPE as a result of changes in molecular weight. (a) CO2 production from R. rhodochrous (n = 5) grown with no supplied carbon (open black diamond) on unaged LDPE (open red circle) and unaged oxo-LDPE (open blue square) compared to 450 h UV-irradiated plastic of both LDPE (solid red circles) or oxo-LDPE (solid blue squares). UV exposure of oxo-LDPE significantly affected CO2 production (p < 0.001), while there was only a small increasing trend in CO2 production between UV-treated LDPE and unaged plastics (p = 0.26). (b) The molecular weight (kDa) of LDPE (red open circles) and oxo-LDPE (blue solid squares), as measured by gel permeation chromatography, compared to UV exposure time (n = 3). (c) The concentration of CO2 measured at 35 days for R. rhodochrous grown on LDPE (red) or oxo-LDPE (blue) after UV irradiation (n = 5, error bars represent standard error) compared to the molecular weight of the sample revealed a clear link between molecular weight and CO2 production. The length of UV irradiation exposure is cited alongside each data point.CC BY · PubMed Central
Figure 3 Microbial growth on plastic in environmental samples may influence testing. Oxo-LDPE was suspended on the surface in sea water tanks for 82 days. The plastic was washed and visualised by SEM. (a) Tracks consistent with hyphael damage were observed (scale bar 20 µm). (b) Salt deposits were observed (scale bar 10 µm). (c) Evidence of crystallised microbes on the plastic surface (scale bar 10 µm). (d) Residual microbial presence was identified (scale bar 1 µm).
Figure 3 Microbial growth on plastic in environmental samples may influence testing. Oxo-LDPE was suspended on the surface in sea water tanks for 82 days. The plastic was washed and visualised by SEM. (a) Tracks consistent with hyphael damage were observed (scale bar 20 µm). (b) Salt deposits were observed (scale bar 10 µm). (c) Evidence of crystallised microbes on the plastic surface (scale bar 10 µm). (d) Residual microbial presence was identified (scale bar 1 µm).CC BY · PubMed Central
Figure 4 Monitoring respiration of Alcanivorax borkumensis when grown on a variety of substrates. (a) A. borkumensis was grown in liquid culture with pyruvate as the sole carbon source and CO2 was measured over time (n = 4, error bars represent standard error). (b) A. borkumensis was grown in liquid culture with no carbon source (open diamonds), LDPE (red circles) or with a bioplastic (yellow star) and CO2 production was measured over time by GC. A. borkumensis evolved twice as much carbon when grown on bioplastic compared with bacteria or LDPE alone (n = 5, p = 0.0006).
Figure 4 Monitoring respiration of Alcanivorax borkumensis when grown on a variety of substrates. (a) A. borkumensis was grown in liquid culture with pyruvate as the sole carbon source and CO2 was measured over time (n = 4, error bars represent standard error). (b) A. borkumensis was grown in liquid culture with no carbon source (open diamonds), LDPE (red circles) or with a bioplastic (yellow star) and CO2 production was measured over time by GC. A. borkumensis evolved twice as much carbon when grown on bioplastic compared with bacteria or LDPE alone (n = 5, p = 0.0006).CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 53 references

Research works printed but not linked: 2

  1. Lundin, A. (2000). Bioluminescence and Chemiluminescence Part C, Elsevier. Methods in Enzymology.
  2. Flickinger, M.C., and Panikov, N.S. (2010). Kinetics, Microbial Growth. Encyclopedia of Industrial Biotechnology, John Wiley & Sons, Inc.

Cited by

See all 68

Metadata

Authors
Rose, R.-S., Richardson, K. H., Latvanen, E. J., Hanson, C. A., Resmini, M., & Sanders, I. A.
Affiliations
Queen Mary University of London (GB)
Corresponding author
Rose, Ruth-Sarah
Venue
International Journal of Molecular Sciences
Publisher
MDPI AG
Published
2020-02-11
Volume
21
Issue
4
Pages
1176
ISSN
1422-0067 (ISSN-L)
OpenAlex
W3006442571
Cited by
67
References
53
Citations by year
2026: 6 · 2025: 16 · 2024: 18 · 2023: 10 · 2022: 7 · 2021: 8 · 2020: 2
FWCI
1.66
Type
journal article
Language
en
Open access
Locations
  • International Journal of Molecular Sciences (publishedVersion, cc-by)
  • bioRxiv (Cold Spring Harbor Laboratory) (acceptedVersion)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • Queen Mary Research Online (Queen Mary University of London) (submittedVersion, cc-by)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Topics
  • Physical Sciences › Environmental Science › Pollution › Microplastics and Plastic Pollution
  • Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
  • Physical Sciences › Environmental Science › Pollution › Microbial bioremediation and biosurfactants
Keywords
plastic biodegradation, CO2 evolution, bacterial respiration, Rhodococcus rhodochrous, Alcanivorax borkumensis, low-density polyethylene, molecular weight, biodegradable polymers, marine plastic pollution
MeSH terms
Biodegradation, Environmental, Carbon Dioxide, Environmental Monitoring, Environmental Pollutants, Plastics, Refuse Disposal, Rhodococcus, Polyethylene, Alcanivoraceae

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Microbial Degradation of Plastic in Aqueous Solutions Demonstrated by CO2 Evolution and Quantification. https://app.cochat.ai/papers/10.3390/ijms21041176
The paper
Rose, R.-S., Richardson, K. H., Latvanen, E. J., Hanson, C. A., Resmini, M., & Sanders, I. A. (2020). Microbial Degradation of Plastic in Aqueous Solutions Demonstrated by CO2 Evolution and Quantification. International Journal of Molecular Sciences. https://doi.org/10.3390/ijms21041176

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.